Results for “reduce task” — Page 82

NASA NTRS1991

The real-time control of planetary rovers through behavior modification

It is not yet clear of what type, and how much, intelligence is needed for a planetary rover to function semi-autonomously on a planetary surface. Current designs assume an advanced AI system that maintains a detailed map of its journeys and the surroundings, and that carefully calculates and tests every move in advance. To achieve these abilities, and because of the limitations of space-qualified electronics, the supporting rover is quite sizable, massing a large fraction of a ton, and requiring technology advances in everything from power to ground operations. An alternative approach is to use a behavior driven control scheme. Recent research has shown that many complex tasks may be achieved by programming a robot with a set of behaviors and activation or deactivating a subset of those behaviors as required by the specific situation in which the robot finds itself. Behavior control requires much less computation than is required by tradition AI planning techniques. The reduced computation requirements allows the entire rover to be scaled down as appropriate (only down-link communications and payload do not scale under these circumstances). The missions that can be handled by the real-time control and operation of a set of small, semi-autonomous, interacting, behavior-controlled planetary rovers are discussed.

Miller, David P.↗

NASA NTRS2005

Stirling Power Convertors Demonstrated in Extended Operation

A 110-W Stirling Radioisotope Generator (SRG110) is being developed by Lockheed Martin Astronautics of Valley Forge, Pennsylvania, under contract to the Department of Energy of Germantown, Maryland. The generator will be a high-efficiency electric power source for NASA space exploration missions that can operate in the vacuum of deep space or in a gaseous atmosphere, such as on the surface of Mars. The generator converts heat supplied by the decay of a plutonium heat source into electric power for the spacecraft. In support of the SRG110 project, the NASA Glenn Research Center has established a technology effort that will provide some of the key data to ensure a successful transition to flight for what will be the first dynamic power system to be used in space. High system efficiency is obtained through the use of free-piston Stirling power-conversion technology. Glenn tasks include in-house testing of Stirling convertors and controllers, materials evaluation and heater head life assessment, structural dynamics, evaluation of electromagnetic interference, assessment of organics, and reliability analysis. There is also an advanced technology effort that is complementary to the near-term technology effort, intended to reduce the mass of the Stirling convertor and increase efficiency.

Schreiber, Jeffrey G.↗

NASA NTRS2011

Recommendations for Enabling Manual Component Level Electronic Repair for Future Space Missions

Long duration missions to the Moon and Mars pose a number of challenges to mission designers, controllers, and the crews. Among these challenges are planning for corrective maintenance actions which often require a repair. Current repair strategies on the International Space Station (ISS) rely primarily on the use of Orbital Replacement Units (ORUs), where a faulty unit is replaced with a spare, and the faulty unit typically returns to Earth for analysis and possible repair. The strategy of replace to repair has posed challenges even for the ISS program. Repairing faulty hardware at lower levels such as the component level can help maintain system availability in situations where no spares exist and potentially reduce logistic resupply mass.This report provides recommendations to help enable manual replacement of electronics at the component-level for future manned space missions. The recommendations include hardware, tools, containment options, and crew training. The recommendations are based on the work of the Component Level Electronics Assembly Repair (CLEAR) task of the Exploration Technology Development Program from 2006 to 2009. The recommendations are derived based on the experience of two experiments conducted by the CLEAR team aboard the International Space Station as well as a group of experienced Miniature/Microminiature (2M) electronics repair technicians and instructors from the U.S. Navy 2M Project Office. The emphasis of the recommendations is the physical repair. Fault diagnostics and post-repair functional test are discussed in other CLEAR reports.

Struk, Peter M.↗

NASA NTRS2015

Additive Manufacturing Infrared Inspection

The Additive Manufacturing Infrared Inspection Task started the development of a real-time dimensional inspection technique and digital quality record for the additive manufacturing process using infrared camera imaging and processing techniques. This project will benefit additive manufacturing by providing real-time inspection of internal geometry that is not currently possible and reduce the time and cost of additive manufactured parts with automated real-time dimensional inspections which deletes post-production inspections.

Gaddy, Darrell↗

DOE OSTI2022

Transfer Learning-Based Independent Component Analysis

Understanding the underlying component structure is crucial for multivariate signal analysis. Among all the techniques that try to learn the latent structure, independent component analysis (ICA) is one of the most important and popular methods, which aims to extract independent components from multivariate signals and enables further analysis. For example, in electroencephalogram (EEG) analysis, artifacts filtering and disease detection are conducted based on the independent components of the signals. One critical challenge in existing ICA approaches is that the component extraction accuracy may degrade when the available data of a unit are limited. To address this issue, this paper proposes a transfer learning-based ICA method by innovatively transferring component distribution from a source domain, so that accurate component extraction results can be achieved even when only limited data are available in the target domain. To the best of our knowledge, this is the first work that leverages transfer learning to improve ICA accuracy with limited available data. In particular, we first extract all the independent components from the source domain by maximizing the log-likelihood function with a Newton-like method on a smooth manifold. Then for the target domain, the component with the largest negentropy is extracted in each round. To effectively leverage the knowledge from the source domain and to prevent the negative transfer, we try to find a component in the source domain that matches the component we are extracting. The probability density function of the matched component will then be used to improve the component extraction accuracy if such matched component can be found; otherwise, no knowledge will be transferred. Finally, numerical simulations and a case study with electrocardiogram (ECG) data are conducted, showing the effectiveness of the proposed method in transferring knowledge and reducing negative transfer.

42 ENGINEERING↗

NASA NTRS1978

Slicing of silicon into sheet material. Silicon sheet growth development for the large area silicon sheet task of the low cost silicon solar array project

Fabrication of a prototype large capacity multiple blade slurry saw is considered. Design of the bladehead which will tension up to 1000 blades, and cut a 45 cm long silicon ingot as large as 12 cm in diameter is given. The large blade tensioning force of 270,000 kg is applied through two bolts acting on a pair of scissor toggles, significantly reducing operator set-up time. Tests with an upside-down cutting technique resulted in 100% wafering yields and the highest wafer accuracy yet experienced with MS slicing. Variations in oil and abrasives resulted only in degraded slicing results. A technique of continuous abrasive slurry separation to remove silicon debris is described.

Holden, S. C.↗

DOE OSTI2021

BETO 2021 Peer Review - Enhancing Acetogen Formate Utilization to Value-Added Products 2.3.2.112

Electricity from a diversity of sources is increasingly utilized due to its low cost. However, since much of this energy is intermittently generated, there is a mismatch between energy demand and supply. Cheap intermittent energy offers opportunities to utilize this energy and generate value-added chemicals. Low-cost electricity can be used to chemically reduce CO2 to formate and methanol, which then can be upgraded to useful chemicals. To utilize formate for production of valuable chemicals, we decided to focus on Clostridium ljungdahlii as our host organism due to several advantages: it can already utilize formate under some conditions, it has the most developed genetic system for acetogens, and is a model organism for the Wood-Ljungdahl Pathway, the most efficient anaerobic carbon fixation pathway. Formate is a feedstock for a variety of bacteria and has several advantages to gaseous electrochemical products, including ease of storage and miscibility in liquid. Acetogens naturally take C1 compounds and convert them to higher chain products through acetyl-CoA, which is a precursor to many valuable products including carboxylic acids and alcohols. For this project, as a proof of concept, we are focusing on converting formate to butanol. This task primarily relies on two parts: improving formate utilization and installing a butanol pathway. First, we characterized the conditions of native formate utilization in C. ljungdahlii. We also have begun working on genetic tools to delete and express genes.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

NASA NTRSDate not supplied

Behavioral Health Benefits of the ISS Pick-and-Eat Crop Growth System

Summary: We summarize findings related to assessing the pick-and-eat salad-crop productivity and acceptability of the ISS food system as a countermeasure to maintain behavioral health in long-duration spaceflight. BACKGROUND Plants are a potential countermeasure for the stresses of living in space. Caring for plants and eating fresh food have been shown to serve as a psychological benefit for previous astronauts and for others in analogous environments such as Antarctica [1,2]. Gardening can be therapeutic in terrestrial settings [3]. These effects may carry over or be more pronounced in austere environments such as spaceflight. It can reduce stress and increase sensory stimulation and enjoyment [2]. Growing crops may offer astronauts meaningful and engaging work as they care for living things in an austere environment away from Earth’s nature and as they provide sustenance for their crew. We examined the extent to which interacting with plants (e.g., tending to, consuming) was related to behavioral health outcomes in long-duration space missions. METHOD Participants were 27 astronauts that interacted with the plant system VEG-04, VEG-05, and HRF-VEG (VEG-03 I-L, PH-04). In total, there were 106 in-flight observations. Participants completed monthly measures of mood and well-being, enjoyment and time spent performing specific crop growth and consuming the plants, meaningfulness, performance, connections with others and the Earth, desire to work with and eat plants, and experiences with struggling or dying plants. Higher ends of the 7-point Likert scale indicated more positive outcomes, lower ends of the scale were anchored with more negative outcomes, and the scale midpoints indicated neutral positions. Participants selected a specific survey version based on whether they interacted with the plant system(s) or not, and we included only the scores from the crewmembers that participated in any given activity. RESULTS & DISCUSSION Results indicated that participants generally rated tasks related to the plants and crop growth as enjoyable. Consuming the harvested plants and voluntary viewing were the most enjoyable activities. Tending to the plants was reported as moderately enjoyable, indicating BHP benefits from this work task. The BHP impacts of whether the task was engaging, meaningful, supported well-being, or was demanding for a crewmember were generally positive and increased over time. As shown in the Figure, working with plants was reported as more engaging, meaningful, and beneficial to well-being over time, while the demand from the task was moderate to low and consistent over time. Engaging, meaningful, and supporting well-being were strongly, positively correlated with each other, which is consistent with research that suggests engaging and meaningful work can support well-being. Plant activities such as voluntary viewing, watering, harvesting, and consuming, were positively related to task engagement and meaning, and enjoyment and well-being. Findings suggest that working with plants and consuming them can be a behavioral health countermeasure for long-duration spaceflight. REFERENCES [1] Schlacht I, et al. (2020) Impact of plants in isolation: The EDEN-ISS…in Antarctica. In Advances in Human Factors of Transportation, Washington DC. [2] Vessel E, Russo S (2015) Effects of reduced sensory stimulation and…countermeasures…. NASA/TM-2015-218576. [3] Odeh R, Guy C (2017) Gardening for therapeutic people-plant interactions during LDSM. Open Agriculture, 2(1), 1-13. ACKNOWLEDGEMENTS This research was supported by the Human Health and Performance Contract NNJ15HK11B, and NASA grant MTL #1075 (PI G.D. Massa).

behavioral health↗

NASA NTRSDate not supplied

Behavioral Health Benefits of the ISS Pick-and-Eat Crop Growth System

Summary: We summarize findings related to assessing the pick-and-eat salad-crop productivity and acceptability of the ISS food system as a countermeasure to maintain behavioral health in long-duration spaceflight. BACKGROUND Plants are a potential countermeasure for the stresses of living in space. Caring for plants and eating fresh food have been shown to serve as a psychological benefit for previous astronauts and for others in analogous environments such as Antarctica [1,2]. Gardening can be therapeutic in terrestrial settings [3]. These effects may carry over or be more pronounced in austere environments such as spaceflight. It can reduce stress and increase sensory stimulation and enjoyment [2]. Growing crops may offer astronauts meaningful and engaging work as they care for living things in an austere environment away from Earth’s nature and as they provide sustenance for their crew. We examined the extent to which interacting with plants (e.g., tending to, consuming) was related to behavioral health outcomes in long-duration space missions. METHOD Participants were 27 astronauts that interacted with the plant system VEG-04, VEG-05, and HRF-VEG (VEG-03 I-L, PH-04). In total, there were 106 in-flight observations. Participants completed monthly measures of mood and well-being, enjoyment and time spent performing specific crop growth and consuming the plants, meaningfulness, performance, connections with others and the Earth, desire to work with and eat plants, and experiences with struggling or dying plants. Higher ends of the 7-point Likert scale indicated more positive outcomes, lower ends of the scale were anchored with more negative outcomes, and the scale midpoints indicated neutral positions. Participants selected a specific survey version based on whether they interacted with the plant system(s) or not, and we included only the scores from the crewmembers that participated in any given activity. RESULTS & DISCUSSION Results indicated that participants generally rated tasks related to the plants and crop growth as enjoyable. Consuming the harvested plants and voluntary viewing were the most enjoyable activities. Tending to the plants was reported as moderately enjoyable, indicating BHP benefits from this work task. The BHP impacts of whether the task was engaging, meaningful, supported well-being, or was demanding for a crewmember were generally positive and increased over time. As shown in the Figure, working with plants was reported as more engaging, meaningful, and beneficial to well-being over time, while the demand from the task was moderate to low and consistent over time. Engaging, meaningful, and supporting well-being were strongly, positively correlated with each other, which is consistent with research that suggests engaging and meaningful work can support well-being. Plant activities such as voluntary viewing, watering, harvesting, and consuming, were positively related to task engagement and meaning, and enjoyment and well-being. Findings suggest that working with plants and consuming them can be a behavioral health countermeasure for long-duration spaceflight. REFERENCES [1] Schlacht I, et al. (2020) Impact of plants in isolation: The EDEN-ISS…in Antarctica. In Advances in Human Factors of Transportation, Washington DC. [2] Vessel E, Russo S (2015) Effects of reduced sensory stimulation and…countermeasures…. NASA/TM-2015-218576. [3] Odeh R, Guy C (2017) Gardening for therapeutic people-plant interactions during LDSM. Open Agriculture, 2(1), 1-13. ACKNOWLEDGEMENTS This research was supported by the Human Health and Performance Contract NNJ15HK11B, and NASA grant MTL #1075 (PI G.D. Massa).

countermeasure↗

DOE OSTI2023

Enabling rapid X-ray CT characterisation for additive manufacturing using CAD models and deep learning-based reconstruction

Metal additive manufacturing (AM) offers flexibility and cost-effectiveness for printing complex parts but is limited to few alloys. Qualifying new alloys requires process parameter optimisation to produce consistent, high-quality components. High-resolution X-ray computed tomography (XCT) has not been effective for this task due to artifacts, slow scan speed, and costs. We propose a deep learning-based approach for rapid XCT acquisition and reconstruction of metal AM parts, leveraging computer-aided design models and physics-based simulations of nonlinear interactions between X-ray radiation and metals. This significantly reduces beam hardening and common XCT artifacts. We demonstrate high-throughput characterisation of over a hundred AlCe alloy components, quantifying improvements in characterisation time and quality compared to high-resolution microscopy and pycnometry. Our approach facilitates investigating the impact of process parameters and their geometry dependence in metal AM.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Accuracy Guarantees and Quantum Advantage in Analog Open Quantum Simulation with and without Noise

Many-body open quantum systems, described by Lindbladian master equations, are a rich class of physical models that display complex equilibrium and out-of-equilibrium phenomena which remain to be understood. In this paper, we theoretically analyze noisy analog quantum simulation of geometrically local open quantum systems and provide evidence that this problem both is hard to simulate on classical computers and could be approximately solved on near-term quantum devices. First, given a noiseless quantum simulator, we show that the dynamics of local observables and the fixed-point expectation values of rapidly mixing local observables in geometrically local Lindbladians can be obtained to a precision of ϵ in time that is poly ( ϵ − 1 ) and uniform in system size. Furthermore, we establish that the quantum simulator would provide a superpolynomial advantage, in run-time scaling with respect to the target precision and either the evolution time (when simulating dynamics) or the Lindbladian’s decay rate (when simulating fixed points), over any classical algorithm for these problems, assuming BQP ≠ BPP . We then consider the presence of noise in the quantum simulator in the form of additional geometrically local Lindbladian terms. We show that the simulation tasks considered in this paper are stable to errors; i.e., they can be solved to a noise-limited, but system-size independent, precision. Finally, we establish that, assuming BQP ≠ BPP , there are stable geometrically local Lindbladian simulation problems such that, as the noise rate on the simulator is reduced, classical algorithms must take time superpolynomially longer in the inverse noise rate to attain the same precision as the analog quantum simulator. Published by the American Physical Society 2025

Kashyap, Vikram (ORCID:0000000208195207)↗

DOE OSTI2014

SU-E-J-204: Radiation Dose to Patients Resulting From Image Guidance Procedures and AAPM TG-180 Update

Purpose: Image-guided radiation therapy (IGRT) is the new paradigm for patient positioning and target localization in radiotherapy. Daily imaging procedures add additional dose to the patient's treatment volume and normal tissues and may expose the organs at risk to unaccounted doses. This presentation is to update the progress of AAPM TG-180 which aims to provide strategies to quantify and account the dose from both MV and kV imaging in patient treatment planning. Methods: Our current knowledge on image guidance dose is presented. A summary of doses from image guidance procedures delivered to patients in relationship with therapeutic doses is given. Different techniques in reducing the image guidance dose are summarized. Typical organ doses resulting from different image acquisition procedures used in IGRT are tabulated. Results: Many techniques to reduce the imaging doses are available in clinical applications. There are large variations between dose to bone and dose to soft tissues for x-rays at kilovoltage energy range. Methods for clinical implementation of accounting for the imaging dose from an imaging procedure are available. Beam data from imaging systems can be generated by combining Monte Carlo simulations and experimental measurements for commissioning imaging beams in the treatment planning. Conclusion: The current treatment planning systems are not yet equipped to perform patient specific dose calculations resulting from kV imaging procedures. The imaging dose from current kV image devices has been significantly reduced and is generally much less than that resulting from MV. Because the magnitude of kV imaging dose is significantly low and the variation between patients is modest, it is feasible to estimate dose based on imaging producers or protocols using tabulated values which provides an alternative to accomplish the task of accounting and reporting imaging doses.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2020

Dynamic Instructions for Nuclear Power Plant Field Workers

Most tasks conducted at a nuclear power plant are guided by a procedure in one way or another. Some tasks must be conducted by strictly adhering to the prescribed steps, while other tasks use the procedures as a reference guide. Traditionally, the procedure process in the nuclear industry has been paper heavy. In recent years however, the nuclear industry has considered adopting more dynamic solutions to improve the efficiency of their work management process, advance human and system performance, as well as reduce the cost of handling paper copies of documentation. As a first step, many nuclear utilities in the U.S. deployed solutions that electronically route the documents through the review and approval processes and where the worker in the field uses an electronic copy of the instruction or procedure on a handheld device. These electronic copies are very similar to the format of the paper instruction but do have some additional capabilities to capture recorded input and notes.

47 OTHER INSTRUMENTATION↗

NASA NTRS1980

Preliminary development of digital signal processing in microwave radiometers

Topics covered involve a number of closely related tasks including: the development of several control loop and dynamic noise model computer programs for simulating microwave radiometer measurements; computer modeling of an existing stepped frequency radiometer in an effort to determine its optimum operational characteristics; investigation of the classical second order analog control loop to determine its ability to reduce the estimation error in a microwave radiometer; investigation of several digital signal processing unit designs; initiation of efforts to develop required hardware and software for implementation of the digital signal processing unit; and investigation of the general characteristics and peculiarities of digital processing noiselike microwave radiometer signals.

Stanley, W. D.↗

NASA NTRS1993

Future space transportation system architecture avionics requirements

NASA began a multi-center study in January 1993 to examine options for providing the most cost effective space transportation system in the future. The key advanced avionics requirements for these vehicle concepts are envisioned to provide significantly improved operational efficiency and effectiveness. It is very desirable to have adaptive guidance, navigation, and control approaches that will allow launch and return in almost any weather condition. The vehicles must be able to accommodate atmospheric density variations and winds without software changes. The flight operations must become much more autonomous in all flight regimes like an aircraft, and preflight checkout should make use of the onboard systems. When the vehicle returns to the launch site, subsystem health must be known and maintenance tasks scheduled accordingly. Ground testing of most subsystems must be eliminated. Also, the health monitoring system must be designed to enhance the ability to abort the mission significantly and save the crew and the vehicle. The displays and controls must be much less complex than current systems and must significantly reduce pilot work load. It is important to have low power, light weight displays and controls. Rendezvous and docking and all flight phases must have autopilot capability to reduce pilot work load for routine operations and in abort situations. The vehicles must have the demonstrated ability to return to the launch site. Abort from all mission phases can put additional demands on the communications system.

Stone, Howard↗

NASA NTRS2000

Operational Considerations when Designing New Ground Systems

The Hubble Space Telescope (HST) launched in April of 1991 with a nominal 15-year old mission. Since then, the HST mission life has been extended to 2010. As is true for all NASA missions, HST is being asked to decrease its operational costs for the remainder of its mission life. Various techniques are being incorporated for cost reductions, with one of the core means being the design of a new and more efficient ground system for HST operations. This new ground system, "Vision 2000", will reduce operational and maintenance costs and also provide the HST Project with added flexibility to react to future changes. Vision 2000 began supporting HST Operations in January of 1999 and will support the mission for the remainder of the mission life. Upgrading a satellite's ground system is a popular approach for reducing costs, but it is also inherently risky. Validating a new ground system can be a severe distraction to a flight team while operating a satellite. Mission data collection and health and safety requirements are rarely, if ever, relaxed during this validation period, forcing flight teams to undertake an additional task while operating the satellite. Additionally, flight teams must usually undergo extensive training to effectively utilize the new system. Once again, this training usually occurs as an additional task, in addition to the nominal satellite operations. While operating the spacecraft, the Flight Team typically assists in the design, validation, and verification of a new ground system. This is a distraction and strain on the Flight Team, but the benefit of using the Flight Team in all phases of ground system development far outweigh the negative aspects. Finally, above the cost of the new system, the integration into the facility with the current control center system are resources and costs not normally taken into account in the design phase of the new system. In addition to the standard issues faced by a Project when upgrading its ground system, the HST Project also must continue to support Space Shuttle servicing missions, which occur approximately every two to three years. This paper will address many of the issues common to all missions when re-hosting ground systems, and those faced by the HST Project in particular.

Walyus, Keith↗

NASA NTRS2018

Advanced Multimodal Solutions for Information Presentation

High-workload, fast-paced, and degraded sensory environments are the likeliest candidates to benefit from multimodal information presentation. For example, during EVA (Extra-Vehicular Activity) and telerobotic operations, the sensory restrictions associated with a space environment provide a major challenge to maintaining the situation awareness (SA) required for safe operations. Multimodal displays hold promise to enhance situation awareness and task performance by utilizing different sensory modalities and maximizing their effectiveness based on appropriate interaction between modalities. During EVA, the visual and auditory channels are likely to be the most utilized with tasks such as monitoring the visual environment, attending visual and auditory displays, and maintaining multichannel auditory communications. Previous studies have shown that compared to unimodal displays (spatial auditory or 2D visual), bimodal presentation of information can improve operator performance during simulated extravehicular activity on planetary surfaces for tasks as diverse as orientation, localization or docking, particularly when the visual environment is degraded or workload is increased. Tactile displays offer a third sensory channel that may both offload information processing effort and provide a means to capture attention when urgently required. For example, recent studies suggest that including tactile cues may result in increased orientation and alerting accuracy, improved task response time and decreased workload, as well as provide self-orientation cues in microgravity on the ISS (International Space Station). An important overall issue is that context-dependent factors like task complexity, sensory degradation, peripersonal vs. extrapersonal space operations, workload, experience level, and operator fatigue tend to vary greatly in complex real-world environments and it will be difficult to design a multimodal interface that performs well under all conditions. As a possible solution, adaptive systems have been proposed in which the information presented to the user changes as a function of taskcontext-dependent factors. However, this presupposes that adequate methods for detecting andor predicting such factors are developed. Further, research in adaptive systems for aviation suggests that they can sometimes serve to increase workload and reduce situational awareness. It will be critical to develop multimodal display guidelines that include consideration of smart systems that can select the best display method for a particular contextsituation.The scope of the current work is an analysis of potential multimodal display technologies for long duration missions and, in particular, will focus on their potential role in EVA activities. The review will address multimodal (combined visual, auditory andor tactile) displays investigated by NASA, industry, and DoD (Dept. of Defense). It also considers the need for adaptive information systems to accommodate a variety of operational contexts such as crew status (e.g., fatigue, workload level) and task environment (e.g., EVA, habitat, rover, spacecraft). Current approaches to guidelines and best practices for combining modalities for the most effective information displays are also reviewed. Potential issues in developing interface guidelines for the Exploration Information System (EIS) are briefly considered.

multimodal display↗

NASA NTRS1976

Onboard experiment data support facility. Task 2 report: Definition of onboard processing requirements

The onboard experiment data support facility (OEDSF) will provide data processing support to various experiment payloads on board the space shuttle. The OEDSF study will define the conceptual design and generate specifications for an OEDSF which will meet the following objectives: (1) provide a cost-effective approach to end-to-end processing requirements, (2) service multiple disciplines (3) satisfy user needs, (4) reduce the amount and improve the quality of data collected, stored and processed, and (5) embody growth capacity.

Source record↗