Search NASA⌕ Search

SEARCH · Search NASA

Results for “reflection data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Dependence of marine stratocumulus reflectivities on liquid water paths

Simple parameterizations that relate cloud liquid water content to cloud reflectivity are often used in general circulation climate models to calculate the effect of clouds in the earth's energy budget. Such parameterizations have been developed by Stephens (1978) and by Slingo and Schrecker (1982) and others. Here researchers seek to verify the parametric relationship through the use of simultaneous observations of cloud liquid water content and cloud reflectivity. The column amount of cloud liquid was measured using a microwave radiometer on San Nicolas Island following techniques described by Hogg et al., (1983). Cloud reflectivity was obtained through spatial coherence analysis of Advanced Very High Resolution Radiometer (AVHRR) imagery data (Coakley and Beckner, 1988). They present the dependence of the observed reflectivity on the observed liquid water path. They also compare this empirical relationship with that proposed by Stephens (1978). Researchers found that by taking clouds to be isotropic reflectors, the observed reflectivities and observed column amounts of cloud liquid water are related in a manner that is consistent with simple parameterizations often used in general circulation climate models to determine the effect of clouds on the earth's radiation budget. Attempts to use the results of radiative transfer calculations to correct for the anisotropy of the AVHRR derived reflectivities resulted in a greater scatter of the points about the relationship expected between liquid water path and reflectivity. The anisotropy of the observed reflectivities proved to be small, much smaller than indicated by theory. To critically assess parameterizations, more simultaneous observations of cloud liquid water and cloud reflectivities and better calibration of the AVHRR sensors are needed.

Coakley, James A., Jr.↗

The Airborne Visible/Infrared Imaging Spectrometer (AVIRIS)

AVIRIS is a facility consisting of a flight system, a ground data system, a calibration facility, and a full-time operations team. The facility was developed by JPL under funding from NASA. NASA also provides funding for operations and maintenance. The flight system is a whisk-broom imager that acquires data in 224 narrow, contiguous spectral bands covering the solar reflected portion of the electromagnetic spectrum. It is flown aboard the NASA high altitude ER-2 research aircraft. The ground data system is a facility dedicated to the processing and distribution of data acquired by AVIRIS. It operates year round at JPL. The calibration facility consists of a calibration laboratory at JPL and a suite of field instruments and procedures for performing inflight calibration of AVIRIS. A small team of engineers, technicians, and scientists supports a yearly operations schedule that includes 6 months of flight operations, 6 months of routine ground maintenance of the flight system, and year-round data processing and distribution. Details of the AVIRIS system, its performance history, and future plans are described.

Vane, Gregg↗

ROSAT implementation of a proposed multi-mission x ray data format

Until recently little effort has been made to ensure that data from X-ray telescopes are delivered in a format that reflects the common characteristics that most X-ray datasets share. Instrument-specific data-product design hampers the comparison of X-ray measurements made by different detectors and should be avoided whenever possible. The ROSAT project and the High Energy Astrophysics Science Archive Research Center (HEASARC) have defined a set of X-ray data products ('rationalized files') for ROSAT data that can be used for distribution and archiving of data from other X-ray missions. This set of 'rationalized files' has been defined to isolate instrument-independent and instrument-specific quantities using standards FITS constructs to ensure portability. We discuss the usage of the 'rationalized files' by ROSAT for data distribution and archiving, with particular emphasis on discrimination between instrument-independent and instrument-specific quantities, and discuss application of this format to data from other X-ray missions.

Corcoran, M.↗

The Most Extreme Thunderstorms on Earth

This study presents a comprehensive examination of the spectrum of storm types and their attributes worldwide (between 35N and 35S latitude), and as a function of season, location, and convective regime using the observed lightning, microwave scattering, and reflectivity signatures from NASA's Tropical Rainfall Measuring Mission (TRMM) low-Earth orbiting observatory. A global, multi-year data set (1998-2000) indicates that the deepest thunderstorms (having reflectivity in excess of 50 dBZ at 9 km altitude) occur in all the sub-tropical continents and occasionally over the open ocean, but are most common over the Americas. The most intense storms have the greatest lightning rates, lowest brightness temperatures and greatest depth of reflectivity- all indicative of strong updrafts and a well-developed volume of precipitation-sized ice particles. Mesoscale convective systems occurring within or in association with forcing from the sub-tropical continents are the most prolific lightning producers. The greatest flash rate to date of 993 flashes per minute was observed by NASA's Lightning Imaging Sensor on May 6, 1999 during an overpass of a pre-frontal squall line extending from Tennessee to Louisiana. The global distribution and frequency of thunderstorms, and the most recent summary of the extreme storms observed from space, in particular, will be discussed in greater detail.

Goodman, Steven J.↗

Analysis of Snow Bidirectional Reflectance from ARCTAS Spring-2008 Campaign

The spring 2008 Arctic Research of the Composition of the Troposphere from Aircraft and Satellites (ARCTAS) experiment was one of major intensive field campaigns of the International Polar Year aimed at detailed characterization of atmospheric physical and chemical processes in the Arctic region. A part of this campaign was a unique snow bidirectional reflectance experiment on the NASA P-3B aircraft conducted on 7 and 15 April by the Cloud Absorption Radiometer (CAR) jointly with airborne Ames Airborne Tracking Sunphotometer (AATS) and ground-based Aerosol Robotic Network (AERONET) sunphotometers. The CAR data were atmospherically corrected to derive snow bidirectional reflectance at high 1 degree angular resolution in view zenith and azimuthal angles along with surface albedo. The derived albedo was generally in good agreement with ground albedo measurements collected on 15 April. The CAR snow bidirectional reflectance factor (BRF) was used to study the accuracy of analytical Ross-Thick Li-Sparse (RTLS), Modified Rahman-Pinty-Verstraete (MRPV) and Asymptotic Analytical Radiative Transfer (AART) BRF models. Except for the glint region (azimuthal angles phi less than 40 degrees), the best fit MRPV and RTLS models fit snow BRF to within 0.05. The plane-parallel radiative transfer (PPRT) solution was also analyzed with the models of spheres, spheroids, randomly oriented fractal crystals, and with a synthetic phase function. The latter merged the model of spheroids for the forward scattering angles with the fractal model in the backscattering direction. The PPRT solution with synthetic phase function provided the best fit to measured BRF in the full range of angles. Regardless of the snow grain shape, the PPRT model significantly over-/underestimated snow BRF in the glint/backscattering regions, respectively, which agrees with other studies. To improve agreement with experiment, we introduced a model of macroscopic snow surface roughness by averaging the PPRT solution over the slope distribution function and by adding a simple model of shadows. With macroscopic roughness described by two parameters, the AART model achieved an accuracy of about plus or minus 0.05 with a possible bias of plus or minus 0.03 in the spectral range 0.4-2.2 micrometers. This high accuracy holds at view zenith angles below 55-60 degrees covering the practically important range for remote sensing applications, and includes both glint and backscattering directions.

Lyapustin, A.↗

Software for Managing Parametric Studies

The Information Power Grid Virtual Laboratory (ILab) is a Practical Extraction and Reporting Language (PERL) graphical-user-interface computer program that generates shell scripts to facilitate parametric studies performed on the Grid. (The Grid denotes a worldwide network of supercomputers used for scientific and engineering computations involving data sets too large to fit on desktop computers.) Heretofore, parametric studies on the Grid have been impeded by the need to create control language scripts and edit input data files painstaking tasks that are necessary for managing multiple jobs on multiple computers. ILab reflects an object-oriented approach to automation of these tasks: All data and operations are organized into packages in order to accelerate development and debugging. A container or document object in ILab, called an experiment, contains all the information (data and file paths) necessary to define a complex series of repeated, sequenced, and/or branching processes. For convenience and to enable reuse, this object is serialized to and from disk storage. At run time, the current ILab experiment is used to generate required input files and shell scripts, create directories, copy data files, and then both initiate and monitor the execution of all computational processes.

Yarrow, Maurice↗

Measuring Upwelling Longwave in the Presence of an Obstruction

One of the key measurements from the Clouds and the Earth’s Radiant Energy System (CERES) satellite is Earth emitted or longwave (LW) radiation. The Baseline Surface Radiation Network (BSRN) aims to provide upwelling LW observations of the best possible quality across all their measurement sites. The disestablished CERES Ocean Validation Experiment (COVE), located at Chesapeake Light Station, approximately 25 kilometers east of Virginia Beach, Virginia (coordinates: 36.90N, 75.71W) was a validation site for CERES measurements and part of the BSRN network. One of the measurements at COVE was upwelling LW radiation made with an Eppley pyrgeometer. However, this measurement was complicated due to the Light Station tower being in its field of view. According to our estimates, the Light Station tower altered 15% of the upwelling LW radiation. To resolve this issue, we obtain a different upwelling longwave value using data from an infrared radiation thermometer (IRT), a pyrgeometer that measures downwelling longwave, and meteorological data. Using an IRT allows conversion from sea surface temperature to a water emission value, the downwelling pyrgeometer provides the reflected flux of the downward longwave radiation, and the meteorological data accounts for the air affects between the ocean surface and the upwelling LW measurement height. Comparing the upwelling LW pyrgeometer value with the newly derived value shows the unwanted consequence of the tower. The tower appears to enhance the upwelling LW signal during the summer, most obvious on a summer clear day, but depresses the upwelling signal, even more, during winter sky conditions (both clear and overcast). The tower affects the upwelling LW measurement in these scenarios up to 5% (20 W/m^2) when compared to the newly derived value. BSRN target uncertainty is 2%. Installing a pyrgeometer to measure upwelling LW without obstructions may not be possible at some measurement sties. This issue can be mitigated using other measurements to derive an upwelling LW value.

Bryan Fabbri↗

Holographic Compact Disk Read-Only Memories

Compact disk read-only memories (CD-ROMs) of proposed type store digital data in volume holograms instead of in surface differentially reflective elements. Holographic CD-ROM consist largely of parts similar to those used in conventional CD-ROMs. However, achieves 10 or more times data-storage capacity and throughput by use of wavelength-multiplexing/volume-hologram scheme.

Liu, Tsuen-Hsi↗

Spatial Variation of Fine Particulate Matter Levels in Nairobi Before and During the COVID-19 Curfew: Implications for Environmental Justice

The temporary decrease of fine particulate matter (PM(sub 2.5)) concentrations in many parts of the world due to the COVID-19 lockdown spurred discussions on urban air pollution and health. However there has been little focus on sub-Saharan Africa, as few African cities have air quality monitors and if they do, these data are often not publicly available. Spatial differentials of changes in PM(sub 2.5) concentrations as a result of COVID also remain largely unstudied. To address this gap, we use a serendipitous mobile air quality monitoring deployment of eight Sensirion SPS 30 sensors on motorbikes in the city of Nairobi starting on 16 March 2020, before a COVID-19 curfew was imposed on 25 March and continuing until 5 May 2020. We developed a random-forest model to estimate PM(sub 2.5) surfaces for the entire city of Nairobi before and during the COVID-19 curfew. The highest PM(sub 2.5) concentrations during both periods were observed in the poor neighborhoods of Kariobangi, Mathare, Umoja, and Dandora, located to the east of the city center. Changes in PM(sub 2.5) were heterogeneous over space. PM(sub 2.5) concentrations increased during the curfew in rapidly urbanizing, the lower-middle-class neighborhoods of Kahawa, Kasarani, and Ruaraka, likely because residents switched from LPG to biomass fuels due to loss of income. Our results indicate that COVID-19 and policies to address it may have exacerbated existing air pollution inequalities in the city of Nairobi. The quantitative results are preliminary, due to sampling limitations and measurement uncertainties, as the available data came exclusively from low-cost sensors. This research serves to highlight that spatial data that is essential for understanding structural inequalities reflected in uneven air pollution burdens and differential impacts of events like the COVID pandemic. With the help of carefully deployed low cost sensors with improved spatial sampling and at least one reference-quality monitor for calibration, we can collect data that is critical for developing targeted interventions that address environmental injustice in the African context.

Environmental justice↗

Evaluation of ERTS data for certain hydrological uses

The author has identified the following significant results. Melting ice has been detected in Lake Erie by comparison of visible and near infrared differential reflectance. This melting condition is confirmed by meteorological ground truth data and concurrent NOAA-2 thermal infrared data. Using near-synchronous ERTS-1 data, it was possible to determine the approximate ground resolution of NOAA-2 very high resolution radiometer by comparing the smallest identifiable ice crack in the imagery and measuring the same crack on the ERTS-1 image. It was determined that photointerpretation and analysis of a single Lake Erie image can, under certain conditions, provide meaningful data on ice dynamics. ERTS-1 imagery is effective for icepack monitoring of the Great Lakes, but the sampling interval of 18 days imposes a severe limitation. Maps of the snow cover in the American River basin for 16 March 1973 have been prepared using all four bands.

Wiesnet, D. R.↗

Study to develop improved spacecraft snow survey methods using Skylab/EREP data

The author has identified the following significant results. A segment of the interim S192 film product from the SL-2 mission has been examined. The film covers the White Mountains area near the California-Nevada border and contains useable data for spectral bands: band 3, band 7, band 9, and band 11. Whereas the snow surface exhibits wide variations in reflectance, no significant change in the reflectance of the clouds occurs over the spectral range of these four bands. In band 11 the clouds appear white and snow appears black; in the band 3 data, both the clouds and the snow appear white. Two potential applications are possible, based on these results. First, because the reflectance of the snow surface in the band 9 data is much lower at the lower elevation terrain of the White Mountains, it appears that the drop in reflectance in the near-IR portion of the spectrum may be related to the wetness of the snow surface. Secondly, the complete reversal in reflectance that is observed in band 11 data indicates that in this portion of the spectrum snow surfaces have a low reflectance regardless of the condition of the snow. Because clouds do not exhibit a similar drop in reflectance, measurements in this spectral band have potential use for automatically distinguishing snow from clouds.

Barnes, J. C.↗

On-Orbit Operation and Performance of MODIS Blackbody

MODIS collects data in 36 spectral bands, including 20 reflective solar bands (RSB) and 16 thermal emissive bands (TES). The TEB on-orbit calibration is performed on a scan-by-scan basis using a quadratic algorithm that relates the detector response with the calibration radiance from the sensor on-board blackbody (BB). The calibration radiance is accurately determined each scan from the BB temperature measured using a set of 12 thermistors. The BB thermistors were calibrated pre-launch with traceability to the NIST temperature standard. Unlike many heritage sensors, the MODIS BB can be operated at a constant temperature or with the temperature continuously varying between instrument ambient (about 270K) and 315K. In this paper, we provide an overview of both Terra and Aqua MODIS on-board BB operations, functions, and on-orbit performance. We also examine the impact of key calibration parameters, such as BB emissivity and temperature (stability and gradient) determined from its thermistors, on the TEB calibration and Level I (LIB) data product uncertainty.

Xiong, X.↗

Measurements of the reflection factor of flat ground surfaces

Measurements are made of the reflection factors of asphalt, concrete, and sod at oblique angles of incidence. Initial measurements were carried out in an anechoic chamber to eliminate the effects of wind and temperature gradients. These were followed by measurements made outdoors over a wider frequency range. Data are presented for the magnitudes of the reflection factors of asphalt, concrete, and sod at angles of incidence of 38 deg and 45 deg.

Ventres, C. S.↗

A comparison of optical rain gauge and radar data from TOGA/COARE

A comparison between rain gauge data and radar data from the Tropical Oceans Global Atmosphere/Coupled Ocean Atmosphere Response Experiment (TOGA/COARE) was studied. The rain gauge data from an echo that passed over the Xiangyanghong #5 on December 24, 1992 was compared to what the MIT radar saw at this location from the R/V Vickers, 103.4 km to the east. The precipitation measured by the rain gauge peaked at 108 mm/hr 92 seconds into the period before tapering off 11 1/2 minutes later. This sharp gradient was evident in a PPI plot of the radar reflectivities and the percentage area-rainfall for the radar data statistics. The percentage area curve was converted to rain rates using a GATE Z-R and compared to a percentage time curve of rain rates according to the rain gauge. A four minute running average applied to the rain gauge rates improved the comparison of peak rates between the rain gauge and radar. Differences in peaks between rain rates observed by the rain gauge and reflectivities observed by the radar could be due to variations in rainfall rates within a single radar data bin. For example, two measurements of reflectivity such as 37 and 47 dBZ within the same bin would result in a 44 dBZ average. This range in rates from 12 mm/hr to 74 mm/hr is observed in 30 seconds by the rain gauges within the first two minutes of the radar echo passage.

Galusha, Linda↗

Using Multi-Angle Imaging SpectroRadiometer (MISR) bidirectional reflectances for land surface studies

MISR imagery enables new methods for cloud screening and retrieval of aerosol properties over a wide range of surface types, and these data are used to compensate for atmospheric effects in the surface retrievals. The derived surface angular signatures are governed, at least in part, by macroscopic texture at the subpixel scale. Such information complements spectral data in distinguishing different types of surface cover, retrieving land surface hemispherical reflectance,and determining biogeophysical properties such as leaf area index and fractional absorbed photosynthetically active radiation. Regional and global MISR data products will be presented to illustrate the capabilities of the instrument andassociated retrieval methodologies.

MISR bidirectional surface studies spectr↗

Experimental water droplet impingement data on modern aircraft surfaces

An experimental method has been developed to determine the water droplet impingement characteristics on two- and three-dimensional aircraft surfaces. The experimental water droplet impingement data are used to validate particle trajectory analysis codes that are used in aircraft icing analyses and engine inlet particle separator analyses. The aircraft surface is covered with thin strips of blotter paper in areas of interest. The surface is then exposed to an airstream that contains a dyed-water spray cloud. The water droplet impingement data are extracted from the dyed blotter paper strips by measuring the optical reflectance of each strip with an automated reflectometer. Preliminary experimental and analytical impingement efficiency data are presented for a NLF(1)-0414F airfoil, s swept MS(1)-0317 airfoil, a swept NACA 0012 wingtip and for a Boeing 737-300 engine inlet model.

Papadakis, Michael↗

Spectral response of the Viking lander camera: Preliminary evaluation

One of the objectives of the Viking lander imaging investigation is to obtain color and near-infrared multispectral panoramas of the Martian surface using six spectral channels in the 0.4 to 1.1 microns wavelength range. This data can be compared with data obtained by imaging a reference test chart to construct approximate spectral reflectance curves that can then be matched to laboratory standards to aid in identifying surface materials. Some channels exhibit appreciable out-of-band spectral responses, making data reduction and interpretation difficult. A preliminary evaluation of predicted multispectral data for eight geological materials reveals that fairly good reflectance estimates can be made for those materials which have monotonically increasing or decreasing reflectances. Reflectance estimates for materials with more complex reflectances often do not reveal important spectral features and sometimes provide misleading results.

Kelly, W. L., IV↗

Hi-Tech for Archeology

Remote sensing is the process of acquiring physical information from a distance, obtaining data on Earth features from a satellite or an airplane. Advanced remote sensing instruments detect radiations not visible to the ordinary camera or the human eye in several bands of the spectrum. These data are computer processed to produce multispectral images that can provide enormous amounts of information about Earth objects or phenomena. Since every object on Earth emits or reflects radiation in its own unique signature, remote sensing data can be interpreted to tell the difference between one type of vegetation and another, between densely populated urban areas and lightly populated farmland, between clear and polluted water or in the archeological application between rain forest and hidden man made structures.

Source record↗