Search NASA⌕ Search

SEARCH · Search NASA

Results for “section”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Measurement of the $t\bar{t} t\bar{t}$ production cross section in pp collisions at $ \sqrt{s} $ = 13 TeV with the ATLAS detector

A measurement of four-top-quark production using proton-proton collision data at a centre-of-mass energy of 13 TeV collected by the ATLAS detector at the Large Hadron Collider corresponding to an integrated luminosity of 139 fb -1 is presented. Events are selected if they contain a single lepton (electron or muon) or an opposite-sign lepton pair, in association with multiple jets. The events are categorised according to the number of jets and how likely these are to contain b-hadrons. A multivariate technique is then used to discriminate between signal and background events. The measured four-top-quark production cross section is found to be 26$^{+17}_{-15}$ fb, with a corresponding observed (expected) significance of 1.9 (1.0) standard deviations over the background-only hypothesis. The result is combined with the previous measurement performed by the ATLAS Collaboration in the multilepton final state. The combined four-top-quark production cross section is measured to be 24$^{+7}_{-6}$ fb, with a corresponding observed (expected) signal significance of 4.7 (2.6) standard deviations over the background-only predictions. It is consistent within 2.0 standard deviations with the Standard Model expectation of 12.0 ± 2.4 fb.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Measurement of the production cross section of pairs of isolated photons in pp collisions at 13 TeV with the ATLAS detector

A measurement of prompt photon-pair production in proton-proton collisions at $\sqrt{s}$ = 13 TeV is presented. The data were recorded by the ATLAS detector at the LHC with an integrated luminosity of 139 fb -1 . Events with two photons in the well-instrumented region of the detector are selected. The photons are required to be isolated and have a transverse momentum of p T, γ1(2) > 40 (30) GeV for the leading (sub-leading) photon. The differential cross sections as functions of several observables for the diphoton system are measured and compared with theoretical predictions from state-of-the-art Monte Carlo and fixed-order calculations. The QCD predictions from next-to-next-to-leading-order calculations and multi-leg merged calculations are able to describe the measured integrated and differential cross sections within uncertainties, whereas lower-order calculations show significant deviations, demonstrating that higher-order perturbative QCD corrections are crucial for this process. The resummed predictions with parton showers additionally provide an excellent description of the low transverse-momentum regime of the diphoton system.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Measurement of prompt open-charm production cross sections in proton-proton collisions at $$ \sqrt{s} $$ = 13 TeV

The production cross sections for prompt open-charm mesons in proton-proton collisions at a center-of-mass energy of 13 TeV are reported. The measurement is performed using a data sample collected by the CMS experiment corresponding to an integrated luminosity of 29 nb-1. The differential production cross sections of the D *± , D ± , and D 0 $(\bar{D}^0)$ mesons are presented in ranges of transverse momentum and pseudorapidity 4 < pT < 100 GeV and |η| < 2.1, respectively. The results are compared to several theoretical calculations and to previous measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Measurement of the cross section of $$ {e}^{+}{e}^{-}\to {\Xi}^{-}{\overline{\Xi}}^{+} $$ at center-of-mass energies between 3.510 and 4.843 GeV

Abstract Usinge + e − collision data corresponding to a total integrated luminosity of 12.9 fb −1 collected with the BESIII detector at the BEPCII collider, the exclusive Born cross sections and the effective form factors of the reaction$$ {e}^{+}{e}^{-}\to {\Xi}^{-}{\overline{\Xi}}^{+} $$ e + e − → Ξ − Ξ ¯ + are measured via the single baryon-tag method at 23 center-of-mass energies between 3.510 and 4.843 GeV. Evidence for the decay$$ \psi (3770)\to {\Xi}^{-}{\overline{\Xi}}^{+} $$ ψ 3770 → Ξ − Ξ ¯ + is observed with a significance of 4.5σby analyzing the measured cross sections together with earlier BESIII results. For the other charmonium(-like) statesψ(4040),ψ(4160),Y(4230),Y(4360),ψ(4415), andY(4660), no significant signal of their decay to$$ {\Xi}^{-}{\overline{\Xi}}^{+} $$ Ξ − Ξ ¯ + is found. For these states, upper limits of the products of the branching fraction and the electronic partial width at the 90% confidence level are provided.

Physics↗
DOE OSTI2015

Measurement of four-jet differential cross sections in √s = 8 TeV proton-proton collisions using the ATLAS detector

Differential cross sections for the production of at least four jets have been measured in proton-proton collisions at √s = 8 TeV at the Large Hadron Collider using the ATLAS detector. Events are selected if the four anti-k t R = 0.4 jets with the largest transverse momentum (p T ) within the rapidity range |y| < 2.8 are well separated (ΔR 4j min > 0.65), all have p T > 64 GeV, and include at least one jet with p T > 100 GeV. The dataset corresponds to an integrated luminosity of 20.3 fb -1 . As a result, the cross sections, corrected for detector effects, are compared to leading-order and next-to-leading-order calculations as a function of the jet momenta, invariant masses, minimum and maximum opening angles and other kinematic variables.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2017

Measurement of the Drell-Yan triple-differential cross section in $pp$ collisions at $\sqrt{s}=8$ TeV

This article presents a measurement of the triple-differential cross section for the Drell-Yan process Z/γ * → ℓ + ℓ - where ℓ is an electron or a muon. The measurement is performed for invariant masses of the lepton pairs, m ℓℓ , between 46 and 200 GeV using a sample of 20.2 fb -1 of pp collisions data at a centre-of-mass energy of $\sqrt{s}=8$ TeV collected by the ATLAS detector at the LHC in 2012. The data are presented in bins of invariant mass, absolute dilepton rapidity, |y ℓℓ |, and the angular variable cos θ * between the outgoing lepton and the incoming quark in the Collins-Soper frame. The measurements are performed in the range |y ℓℓ | < 2.4 in the muon channel, and extended to |y ℓℓ | < 3.6 in the electron channel. The cross sections are used to determine the Z boson forward-backward asymmetry as a function of |y ℓℓ | and m ℓℓ . The measurements achieve high-precision, below the percent level in the pole region, excluding the uncertainty in the integrated luminosity, and are in agreement with predictions. These precision data are sensitive to the parton distribution functions and the effective weak mixing angle.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Inclusive production cross sections at N 3 LO

We present for the first time the inclusive cross section for associated Higgs boson production with a massive gauge boson at next-to-next-to-next-to-leading order in QCD. Furthermore, we introduce n3loxs, a public, numerical program for the evaluation of inclusive cross sections at the third order in the strong coupling constant. Our tool allows to derive predictions for charged- and neutral-current Drell-Yan production, gluon- and bottom-quark-fusion Higgs boson production and Higgs boson associated production with a heavy gauge boson. We discuss perturbative and parton distribution function (PDF) uncertainties of the aforementioned processes. We perform a comparison of global PDF sets for a variety of process including associated Higgs boson production and observe 1σ deviations among predictions for several processes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Measurement of the cross section of e + e - → ηπ + π - at center-of-mass energies from 3.872 GeV to 4.700 GeV

Using data samples with an integrated luminosity of 19 fb -1 at twenty-eight center-of-mass energies from 3.872 GeV to 4.700 GeV collected with the BESIII detector at the BEPCII electron-positron collider, the process e + e - → ηπ + π - and the intermediate process e + e - → ηρ 0 are studied for the first time. The Born cross sections are measured. No significant resonance structure is observed in the cross section lineshape.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Measurement of $$ {e}^{+}{e}^{-}\to p{K}^{-}\overline{\Lambda}+c.c. $$ cross sections between 4.009 GeV and 4.951 GeV

Abstract Usinge + e − collision datasets corresponding to a total integrated luminosity of 21.7 fb −1 collected with the BESIII detector at the BEPCII collider at center-of-mass energies ranging from 4.009 GeV to 4.951 GeV, the energy-dependent cross sections of$$ {e}^{+}{e}^{-}\to p{K}^{-}\overline{\Lambda}+c.c. $$ e + e − → p K − Λ ¯ + c . c . are measured for the first time. By fitting these energy-dependent cross sections, we search for the excitedψstatesψ(4160) andψ(4415), and the vector charmonium-like statesψ(4230),ψ(4360), andψ(4660). No evidence for these is observed and the upper limits on the branching fractions of these states decaying into$$ p{K}^{-}\overline{\Lambda}+c.c. $$ p K − Λ ¯ + c . c . are set at the 90% confidence level.

Physics↗
DOE OSTI2015

Profiling of adrenocorticotropic hormone and arginine vasopressin in human pituitary gland and tumor thin tissue sections using droplet-based liquid-microjunction surface-sampling-HPLC–ESI-MS–MS

Described here are the results from the profiling of the proteins arginine vasopressin (AVP) and adrenocorticotropic hormone (ACTH) from normal human pituitary gland and pituitary adenoma tissue sections using a fully automated droplet-based liquid microjunction surface sampling-HPLC-ESI-MS/MS system for spatially resolved sampling, HPLC separation, and mass spectral detection. Excellent correlation was found between the protein distribution data obtained with this droplet-based liquid microjunction surface sampling-HPLC-ESI-MS/MS system and those data obtained with matrix assisted laser desorption ionization (MALDI) chemical imaging analyses of serial sections of the same tissue. The protein distributions correlated with the visible anatomic pattern of the pituitary gland. AVP was most abundant in the posterior pituitary gland region (neurohypophysis) and ATCH was dominant in the anterior pituitary gland region (adenohypophysis). The relative amounts of AVP and ACTH sampled from a series of ACTH secreting and non-secreting pituitary adenomas correlated with histopathological evaluation. ACTH was readily detected at significantly higher levels in regions of ACTH secreting adenomas and in normal anterior adenohypophysis compared to non-secreting adenoma and neurohypophysis. AVP was mostly detected in normal neurohypophysis as anticipated. This work demonstrates that a fully automated droplet-based liquid microjunction surface sampling system coupled to HPLC-ESI-MS/MS can be readily used for spatially resolved sampling, separation, detection, and semi-quantitation of physiologically-relevant peptide and protein hormones, such as AVP and ACTH, directly from human tissue. In addition, the relative simplicity, rapidity and specificity of the current methodology support the potential of this basic technology with further advancement for assisting surgical decision-making.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

The hepatoduodenal ligament revisited: cross-sectional imaging spectrum of non-neoplastic conditions

Introduction: The hepatoduodenal ligament is frequently involved by conditions affecting the portal triad and surrounding structures, including a vast array of non-neoplastic conditions. Due its unique location between the retroperitoneum and the peritoneal space, the hepatoduodenal ligament is also targeted by inflammatory conditions involving the retroperitoneum and the liver. Finally, the presence of lymphatics and of the biliary tracts makes the hepatoduodenal ligament a route of spread for a variety of infections. The purpose of this pictorial essay is twofold: to review the cross-sectional radiological anatomy and variants of the structures within the hepatoduodenal ligament, and to illustrate the non-neoplastic conditions that may arise within the hepatoduodenal ligament. Conclusion: Familiarity with these specific entities and their cross-sectional imaging findings is fundamental for a more accurate diagnosis.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2018

Analysis of the Stress State of Hollow Cylinders with Concave Corrugated Cross Sections

In the three-dimensional statement, by the method of approximation of functions by discrete Fourier series, we perform the analysis of the dependence of the stress state of a hollow cylinder whose cross section has the form of joined concave semicorrugations subjected to the action of internal pressure under certain conditions imposed on the end faces on the thicknesses and curvatures of the cross sections of the cylinders caused by the changes in the number of semicorrugations. The results of the solution of the problem are presented in the form of the plots of distributions of the fields of displacements and stresses.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Investigations of Nonconventional Cross Sections of Gas-Discharge Lasers

Gains of lasers with regular polygon cross sections of tubes having curvilinear sections are considered. Calculations are performed for parabolic polygons, a triangle, and a circle with extra curvature. Results obtained show the consistency of the model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Deformational Features and Microstructure Evolution of Copper Fabricated by a Single Pass of the Elliptical Cross-Section Spiral Equal-Channel Extrusion (ECSEE) Process

The objectives of this work are to study the deformational feature, textures, microstructures, and dislocation configurations of ultrafine-grained copper processed by the process of elliptical cross-section spiral equal-channel extrusion (ECSEE). The deformation patterns of simple shear and pure shear in the ECSEE process were evaluated with the analytical method of geometric strain. The influence of the main technical parameters of ECSEE die on the effective strain distribution on the surface of ECSEE-fabricated samples was examined by the finite element simulation. The high friction factor could improve the effective strain accumulation of material deformation. Moreover, the pure copper sample fabricated by ECSEE ion shows a strong rotated cube shear texture. The refining mechanism of the dislocation deformation is dominant in copper processed by a single pass of ECSEE. The inhomogeneity of the micro-hardness distribution on the longitudinal section of the ECSEE-fabricated sample is consistent with the strain and microstructure distribution features.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Crashworthiness of a Composite Wing Section: Numerical Investigation of the Bird Strike Phenomenon by Using a Coupled Eulerian–Lagrangian Approach

Crashworthiness is defined as the capability of a structure to guarantee its occupants safety during a crash event. In the present work, the crashworthiness of a composite wing section, subjected to a bird strike event, has been investigated. Indeed, the mechanical behavior of the impacted wing section has been inspected by means of the FE code Abaqus/Explicit. The impact phenomenon has been numerically simulated with a coupled Eulerian–Lagrangian (CEL) approach. The impacted structure has been modeled considering a Lagrangian formulation, while a Eulerian one has been used to model the bird. Moreover, Eulerian–Lagrangian contacts are used for transfer the loads arising from the impact event to the Lagrangian structure. The proposed numerical model, capable to take into account the matrix and fiber traction and compression damages, uses a 3D finite element approach to better predict the deformations and the damages onset and propagation during the impact event. The numerical results, in terms of structural deformation and damage onset and propagation, have been obtained by considering different impact locations and different impact angles.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Neutron Capture Cross Sections of Radioactive Nuclei

Alternative methods to calculate neutron capture cross sections on radioactive nuclei are reported using the theory of Inclusive Non-Elastic Breakup (INEB) developed by Hussein and McVoy. The statistical coupled-channels theory proposed in Ref. [2] is further extended in the realm of random matrices. The case of reactions with the projectile and the target being twocluster nuclei is also analyzed and applications are made for scattering from a deuteron target. An extension of the theory to a three-cluster projectile incident on a two-cluster target is also discussed. The theoretical developments described here should open new possibilities to obtain information on the neutron capture cross sections of radioactive nuclei using indirect methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

On The Use of Sectional Techniques for the Solution of Depolymerization Population Balances: Results on a Discrete-Continuous Mesh

To study the discrete bond-breaking phenomena of depolymerization, the use of a fully continuous Population Balance Equation (PBE) is inadequate to embody all the inherent characteristics of the process, thus resulting in the need for a discrete-continuous mesh. In this work, the performance of the three most state-of-the-art sectional techniques, i.e. the fixed pivot technique (FPT), cell average technique (CAT) and finite volume scheme (FVS) in approximating discrete depolymerization using discrete-continuous PBEs was extensively compared and evaluated. The solutions from these three methods show different accuracy depending on the breakage mechanisms. For chain-end scission, the FPT and the CAT satisfactorily predict the population densities and moments whereas the FVS fails to predict the population densities but preserves the zeroth and the first moments. In the application of a discrete-continuous model, we identified a previously-not-reported issue of a precipitous drop in the number density at the boundary of discrete and continuous region specifically for chain-end scission. We successfully fixed this problem by employing the alterations proposed in this paper, to the particle allocation functions at the boundary points. For random scission, all three sectional techniques predict the population densities and moments to a high degree of accuracy, even at a very coarse mesh, through the use of our new stoichiometric kernel which is able to closely approximate the inherently discrete bond-breaking depolymerization process. The assessments in this present work intends to provide a clear-cut direction to efficient and economical modelling of depolymerization processes.

Ahamed, Firnaaz↗
DOE OSTI2022

Introduction to the special section on learning and security for multi-agent systems

This report features six articles that provide an overview of the emerging research topics at the intersection learning, security, and multi-agent systems. Recent years have witnessed a surge in the number of works at their intersections, and they have appeared in system and control communities as well as many other communities in artificial intelligence, cyber–physical systems, and economics. The articles in this special section give accessible and comprehensive tutorials and surveys for a broad systems and control audience, covering topics including adversarial machine learning, multi-agent reinforcement learning, cyber resilience, resilient control systems, and game design. It is hopeful that this special section will spawn future interest and cross-disciplinary collaborations in this emerging transdisciplinary research area.

97 MATHEMATICS AND COMPUTING↗