SEARCH · Search NASA

Results for “surface composition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

All sources NASA NTRS DOE OSTI

DOE OSTI2017

Effects of Solvent Composition on Liquid Range, Glass Transition, and Conductivity of Electrolytes of a (Li, Cs)PF 6 Salt in EC-PC-EMC Solvents

Electrolytes of 1 M LiPF 6 (lithium hexafluorophosphate) and 0.05 M CsPF 6 (cesium hexafluorophosphate) in EC-PC-EMC (ethylene carbonate-propylene carbonate-ethyl methyl carbonate) solvents of varying solvent compositions were studied for the effects of solvent composition on the lower limit of liquid range, viscosity (as reflected by the glass transition temperature), and electrolytic conductivity. In addition, a ternary phase diagram of EC-PC-EMC was constructed and crystallization temperatures of EC and EMC were calculated to assist the interpretation and understanding of the change of liquid range with solvent composition. A function based on Vogel-Fulcher-Tammann equation was fitted to the conductivity data in their entirety and plotted as conductivity surfaces in solvent composition space for more direct and clear comparisons and discussions. Changes of viscosity and dielectric constant of the solvents with their composition, in relation to those of the solvent components, were found to be underlying many of the processes studied.

Ding, Michael S. (ORCID:0000000293021032)↗

DOE OSTI2019

Identification of a Pt 3 Co Surface Intermetallic Alloy in Pt–Co Propane Dehydrogenation Catalysts

Bimetallic Pt-Co nanoparticles (NPs) were prepared and characterized by scanning transmission electron microscopy, in situ X-ray absorption spectroscopy, in situ synchrotron X-ray diffraction, and catalytic conversion for propane dehydrogenation with and without added H-2. In addition, the surface extended X-ray absorption fine structure (EXAFS) obtained by fitting the difference spectrum between the fully reduced and room-temperature-oxidized catalysts suggest that the surface structure remains Pt 3 Co, although the core changes from Pt to Pt 3 Co and to PtCo. At low Co loading, the bimetallic nanoparticles form a Pt3Co intermetallic surface alloy with Pt-rich core. With increasing Co loading, a full alloy forms where both the surface and NP compositions are Pt 3 Co. A further increase in Co loading leads to a Co-rich NP core, likely PtCo, with a surface of Pt 3 Co. Although Pt-Co intermetallic alloys form two different phases and several morphologies, the surface structures are similar in all catalysts. Although both monometallic Pt and Co are active for alkane dehydrogenation, all bimetallic Pt-Co catalysts are significantly more olefin selective than either single metal. The turnover rates of the bimetallic catalysts indicate that Pt is the active atom with little contribution from Co atoms. The high olefin selectivity is suggested to be due to Co acting as a less active structural promoter to break up large Pt ensembles in bimetallic NPs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2016

Plasma power recycling at the divertor surface

With a divertor made of solid materials like carbon and tungsten, plasma ions are expected to be recycled at the divertor surface with a time-averaged particle recycling coefficient very close to unity in steady-state operation. This means that almost every plasma ion (hydrogen and helium) will be returned to the plasma, mostly as neutrals. The power flux deposited by the plasma on the divertor surface, on the other hand, can have varying recycling characteristics depending on the material choice of the divertor; the run-time atomic composition of the surface, which can be modified by material mix due to impurity migration in the chamber; and the surface morphology change over time. In general, a high-Z–material (such as tungsten) surface tends to reflect light ions and produce stronger power recycling, while a low-Z–material (such as carbon) surface tends to have a larger sticking coefficient for light ions and hence lower power recycling. Here, an explicit constraint on target plasma density and temperature is derived from the truncated bi-Maxwellian sheath model, in relation to the absorbed power load and power recycling coefficient at the divertor surface. Lastly, it is shown that because of the surface recombination energy flux, the attached plasma has a sharper response to power recycling in comparison to a detached plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS2012

Development of IR Contrast Data Analysis Application for Characterizing Delaminations in Graphite-Epoxy Structures

Objective: Develop infrared (IR) flash thermography application based on use of a calibration standard for inspecting graphite-epoxy laminated/honeycomb structures. Background: Graphite/Epoxy composites (laminated and honeycomb) are widely used on NASA programs. Composite materials are susceptible for impact damage that is not readily detected by visual inspection. IR inspection can provide required sensitivity to detect surface damage in composites during manufacturing and during service. IR contrast analysis can provide characterization of depth, size and gap thickness of impact damage. Benefits/Payoffs: The research provides an empirical method of calibrating the flash thermography response in nondestructive evaluation. A physical calibration standard with artificial flaws such as flat bottom holes with desired diameter and depth values in a desired material is used in calibration. The research devises several probability of detection (POD) analysis approaches to enable cost effective POD study to meet program requirements.

Havican, Marie↗

NASA NTRS1975

Preliminary evaluation of a novel polyimide adhesive for bonding titanium and reinforced composites

A novel polyimide has been developed which shows promise as an adhesive for bonding titanium-to-titanium, titanium-to-polyimide composite and composite-to-composite with excellent lap shear strengths at room temperature and moderate strengths at 288 C. The adhesive is a high molecular weight polyimide made from commercially available monomers. The use of an ether as the solvent for the polymerization and for application of the polyamic acid enhanced the adhesive properties of the polyimide. At room temperature, P13N/glass composite bonded to titanium or to itself failed primarily in the surface layer of the composite, whereas at 260 C the failure was primarily cohesive. Failure of the P13N/unidirectional HT-S graphite composite-to-titanium bonded composites occurred in the composite regardless of the test temperature. Preliminary shear results with cross-plied P13N/HT-S graphite composite-to-composite specimens showed failure in the bonded surface fibers.

Progar, D. J.↗

DOE OSTI2025

Basin-Size Mapping: Prediction of Metastable Polymorph Synthesizability Across TaC–TaN Alloys

The sizes of the basins of attraction on the potential energy surface are helpful indicators in determining the experimental synthesizability of metastable phases. In principle, these basins can be controlled with changes in thermodynamic conditions such as composition, pressure, and surface energy. Herein, we use random structure sampling to computationally study how alloying smoothly perturbs basin of attraction sizes. The TaC 1-x N x pseudobinary is an ideal test system given the structural and polymorphic contrast of its parent compounds and their technological relevance as epitaxial substrates for Al 1-x Ga x N. While we find limited thermodynamic stability across all computationally observed phases, random structure sampling shows a significant composition region where the rocksalt basin dominates. As such, we predict the potential for the nonequilibrium synthesis of metastable rocksalt TaC 1-x N x alloys as substrates for Al 1-x Ga x N. At higher nitrogen concentrations, other low-energy metastable polymorphs emerge that continue to retain the hexagonal close packing suitable for III-N growth. Confidence in these trends was established through uncertainty quantification of the basin sizes and energy distributions; such analysis utilized the Beta and Dirichlet distributions. In conclusion, we also find (a) polymorph basin sizes can be rationalized in terms of energetic preferences for different coordination environments; and (b) basin sizes universally shrink with increasing nitrogen content, making the system more prone to amorphous growth.

36 MATERIALS SCIENCE↗

DOE OSTI2019

High-temperature, spectrally-selective, scalable, and flexible thin-film Si absorber and emitter

Solar thermal technologies have great potential to provide low-cost storage for solar energy. However, their efficiencies are limited by a lack of scalable, mechanically flexible, durable, yet highly-efficient spectrally-selective solar absorbers suitable for high temperatures at low solar concentrations. Here, we overcome these challenges by fabricating a scalable free-standing spectrally-selective thin-film Si absorber and emitter (SSTFS) composite. Its high-temperature emittance shows strong spectral selectivity, even at 595 °C. Thermal stability is proven by measuring optical properties before and after thermal cycling equivalent to one day of concentrated sunlight. Despite the use of crystalline Si, the fabricated SSTFS composite exhibits exceptional mechanical flexibility to cover most surface geometries. The SSTFS composite demonstrates the potential of high-temperature, efficient and flexible solar absorbers and thermal emitters to advance renewable solar energy with storage.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Let’s Stick Together: Interplay of Moisture, Particle Size, and Anatomical Fraction in the Flowability of Corn Stover Crumbles

Handling of agricultural waste biomass feedstocks (such as corn stover) is a persistent challenge in the production of biofuels and chemicals at integrated biorefineries. Inconsistent flowability and high feedstock variability creates equipment downtime and processing challenges. This work investigates the influence of anatomical fractionation and moisture content on the bulk solids handling behavior of corn stover crumbles. A combination of rotational shear testing, tribological measurements, and surface and sorption characterization techniques (inverse gas chromatography (IGC), dynamic vapor sorption (DVS), and electron microscopy) were used to evaluate the contributions of particle composition, size, and surface properties to flow behavior. Shear and frictional testing revealed that moisture content has the greatest effect on flowability, significantly increasing unconfined yield strength (ƒ c ) and reducing the flow function coefficient (F F C), regardless of anatomical fraction. While differences in surface energy were observed between fractions, particularly in polar contributions (γ AB ), these did not correspond to meaningful differences in flow behavior. Coarser 6 mm particles exhibited poorer flow performance than 4 mm crumbles, likely due to broader particle size distributions and increased particle interlocking. Taken together, these results suggest that anatomical fractionation provides minimal benefit from a bulk handling perspective. Moisture content and particle size heterogeneity dominate handling behavior, reinforcing the utility of unfractionated corn stover in processing environments. These insights can inform the design of more efficient and reliable feedstock processing systems for agricultural biomass in integrated biorefineries.

09 BIOMASS FUELS↗

NASA NTRS1974

Tribological properties of self-lubricating fluoride-metal composites to 900 C (1650 F): A review and some new developments

The friction and wear behavior of some fluoride-metal, self-lubricating composites are summarized. Fluoride-infiltrated sintered nickel alloy composites and plasma-sprayed, co-deposited fluoride-nickel alloy composites are described. The importance of proper surface-conditioning of the composites is stressed. Performance of fluoride-metal composites in some machine application evaluation is discussed.

Sliney, H. E.↗

NASA NTRS1976

Calculation of differential-turning barrier surfaces

The computation of composite differential-turn trajectory pairs is studied for 'fast-evader' and 'neutral-evader' idealizations introduced in earlier publications. Transversality and generalized corner conditions are examined and the joining of trajectory segments discussed. A criterion is given for the screening of 'tandem-motion' trajectory segments. Main focus is upon the computation of barrier surfaces. Fortunately, from a computational viewpoint, the trajectory pairs defining these surfaces need not be calculated completely, the final subarc of multiple-subarc pairs not being required. Some calculations for pairs of example aircraft are presented.

Kelley, H. J.↗

NASA NTRS1981

Natural laminar flow data from full-scale flight and wind-tunnel experiments

Experimental results obtained at NASA Langley during studies of natural laminar flow (NLF) over commercially produced aircraft surfaces are reported. The general aviation aircraft examined were light aircraft, yet displayed NLF extents close to the maximum available and equivalent to high performance business aircraft flying envelopes. Sublimating chemicals and acoustic detection techniques were employed to measure the boundary layer transition. Theoretical predictions of boundary layer stability were found to match well with the experimental data, with consideration given to both swept wings and the amplitudes of allowable waves on the airfoil surfaces. The presence of the NLF on the airfoil surfaces confirmed the benefits available from use of composite materials for airfoil surfaces.

Holmes, B. J.↗

NASA NTRS2012

Kinetic and Potential Sputtering of Lunar Regolith: The Contribution of the Heavy Highly Charged (Minority) Solar Wind Ions

Solar wind sputtering of the lunar surface helps determine the composition of the lunar exosphere and contributes to surface weathering. To date, only the effects of the two dominant solar wind constituents, H+ and He+, have been considered. The heavier, less abundant solar wind constituents have much larger sputtering yields because they have greater mass (kinetic sputtering) and they are highly charged (potential sputtering) Their contribution to total sputtering can therefore be orders of magnitude larger than their relative abundances would suggest

Meyer, F. W.↗

NASA NTRS2012

The Geology of the Marcia Quadrangle of Asteroid 4Vesta: An Integrated Mapping Study Using Dawn Spacecraft Data

We used geologic mapping applied to Dawn data as a tool to understand the geologic history of the Marcia quadrangle of Vesta. This region hosts a set of relatively fresh craters and surrounding ejecta field, an unusual dark hill named Arisia Tholus, and a orange (false color) diffuse material surrounding the crater Octavia. Stratigraphically, from oldest to youngest, three increasingly larger impact craters named Minucia, Calpurnia, and Marcia make up a snowmanlike feature, which is surrounded by a zone of dark material interpreted to consist of impact ejecta and possibly impact melts. The floor of Marcia contains a pitted terrain thought to be related to release of volatiles (1). The dark ejecta field has an enhanced signature of H, possibly derived from carbonaceous chondritic material that accumulated in Vesta s crust (2,3). The dark ejecta has a spectrally distinctive behavior with shallow pyroxenes band depths. Outside the ejecta field this quadrangle contains various cratered terrains, with increasing crater abundance moving south to north away from the Rheasilvia basin. Arisia Tholus, originally suggested as an ancient volcano, appears to be an impact-sculpted basin rim fragment with a superposed darkrayed impact crater. There remains no unequivocal evidence of volcanic features on Vesta s surface, likely because basaltic material of the HED meteorite suite demonstrates magmatism ended very early on Vesta (4). Ongoing work includes application of crater statistical techniques to obtain model ages of surface units, and more detailed estimates of the compositional variations among the surface units.

Williams, David A.↗

DOE OSTI2018

Tunnel barrier schottky

A diode includes: a semiconductor substrate; a cathode metal layer contacting a bottom of the substrate; a semiconductor drift layer on the substrate; a graded aluminum gallium nitride (AlGaN) semiconductor barrier layer on the drift layer and having a larger bandgap than the drift layer, the barrier layer having a top surface and a bottom surface between the drift layer and the top surface, the barrier layer having an increasing aluminum composition from the bottom surface to the top surface; and an anode metal layer directly contacting the top surface of the barrier layer.

42 ENGINEERING↗

DOE OSTI2018

Tunnel barrier schottky

25 ENERGY STORAGE↗

NASA NTRS2016

Particulate Removal Using a CO2 Composite Spray Cleaning System

The Planetary Protection surface cleanliness requirements for potential Mars Sample Return hardware that would come in contact with Martian samples may be stricter than previous missions. The Jet Propulsion Laboratory has developed a new technology that will enable us to remove sub-micron size particles from critical hardware surfaces. A hand-held CO2 composite cleaning system was tested to verify its cleaning capabilities. This convenient, portable device can be used in cleanrooms for cleaning after rework or during spacecraft integration and assembly. It is environmentally safe and easy to use. This cleaning concept has the potential to be further developed into a robotic cleaning device on a Mars Lander to be used to clean sample acquisition or sample handling devices in situ. Contaminants of known sizes and concentrations, such as fluorescent microspheres and spores were deposited on common spacecraft material surfaces. The cleaning efficiency results will be presented and discussed.

carbon dioxide↗

NASA NTRS1980

Geochemical anomalies on the eastern limb and farside of the moon

A variety of orbital geochemistry and photogeologic data was used to investigate major geochemical anomalies on the east limb and farside of the moon and to determine the processes responsible for their formation. These anomalies are located in the following regions: (1) near Langemak crater, (2) Mare Marginis, (3) Balmer crater, (4) terrain north of Taruntius crater, and (5) Van de Graaff. It was concluded that these anomalies are related to episodes of extrusive igneous activity which produced deposits with a variety of ages and compositions. Some of the associated volcanic deposits exhibit albedos and surface morphologies similar to those of the nearside maria, while others are now thinly covered by highland debris and are commonly represented by light plains units which exhibit clusters of dark-haloed craters. Little evidence was found for a genuine episode of highland volcanism (e.g., Apollo 15 KREEP basalt, highland basalt, etc.). The existence of intermediate basalts on the eastern limb and farside supports previous suggestions that KREEP-like volcanism was not limited to a small area of the lunar nearside. Eastern limb and farside volcanic activity has been more extensive in both space and time and has produced a greater variety of compositions than has previously been thought. Since thinly covered basaltic units can exert a strong influence on regional surface chemistry as determined from orbit, caution is urged in interpreting the surface compositions of highland terrains which exhibit a high density of dark-haloed impact craters.

Hawke, B. R.↗

DOE OSTI2019

Bulk single crystal growth and sample surface preparation of catalytic NaAu 2

Here in we have grown bulk single crystals of NaAu 2 for the first time to enable surface studies on the nature of the (111) bulk surface. This intermetallic compound exhibits surprisingly high catalytic activity for CO oxidation, a benchmark reaction. Theory predicts NaAu 2 to be the most thermodynamically stable composition in the Na-Au binary phase diagram and NaAu 2 has been seen to preferentially form in experiments containing Na and Au which supports this prediction. The (111) surface was also predicted to be the most stable and is nearly bulk-terminated making single crystal samples prepared with this crystallographic orientation a fitting choice. As a result, the crystal quality and surface composition of the metallographically prepared surface was determined by x-ray diffraction methods in addition to optical and electron microscopy.

(111) catalytic surface↗