Search NASA⌕ Search

SEARCH · Search NASA

Results for “ANALOG PROCESSING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Optimizing the sensitivity of high repetition rate broadband transient optical spectroscopy with modified shot-to-shot detection

A major limitation of transient optical spectroscopy is that relatively high laser fluences are required to enable broadband, multichannel detection with acceptable signal-to-noise levels. Under typical experimental conditions, many condensed phase and nanoscale materials exhibit fluence-dependent dynamics, including higher order effects such as carrier–carrier annihilation. With the proliferation of commercial laser systems, offering both high repetition rates and high pulse energies, have come new opportunities for high sensitivity pump-probe measurements at low pump fluences. However, experimental considerations needed to fully leverage the statistical advantage of these laser systems have not been fully described. Here, we demonstrate a high repetition rate, broadband transient spectrometer capable of multichannel shot-to-shot detection at 90 kHz. Importantly, we find that several high-speed cameras exhibit a time-domain fixed pattern noise resulting from interleaved analog-to-digital converters, which is particularly detrimental to the conventional “ON/OFF” modulation scheme used in pump-probe spectroscopy. Using a modified modulation and data processing scheme, we achieve a noise level of 10−5 in 4 s for differential transmission, an order of magnitude lower than for commercial 1 kHz transient spectrometers for the same acquisition time. We leverage the high sensitivity of this system to measure the differential transmission of monolayer graphene at low pump fluence. We show that signals on the order of 10−6 OD can be measured, enabling a new data acquisition regime for low-dimensional materials.

47 OTHER INSTRUMENTATION↗

ENSTATITE-RICH WARM DEBRIS DUST AROUND HD165014

We present the Spitzer/Infrared Spectrograph spectrum of the main-sequence star HD165014, which is a warm ({approx_gt}200 K) debris disk candidate discovered by the AKARI All-Sky Survey. The star possesses extremely large excess emission at wavelengths longer than 5 {mu}m. The detected flux densities at 10 and 20 {mu}m are {approx}10 and {approx}30 times larger than the predicted photospheric emission, respectively. The excess emission is attributable to the presence of circumstellar warm dust. The dust temperature is estimated as 300-750 K, corresponding to the distance of 0.7-4.4 AU from the central star. Significant fine-structured features are seen in the spectrum and the peak positions are in good agreement with those of crystalline enstatite. Features of crystalline forsterite are not significantly seen. HD165014 is the first debris disk sample that has enstatite as a dominant form of crystalline silicate rather than forsterite. Possible formation of enstatite dust from differentiated parent bodies is suggested according to the solar system analog. The detection of an enstatite-rich debris disk in the current study suggests the presence of large bodies and a variety of silicate dust processing in warm debris disks.

79 ASTRONOMY AND ASTROPHYSICS↗

DETECTION OF CH{sub 4} IN THE GV TAU N PROTOPLANETARY DISK

T Tauri stars are low mass young stars that may serve as analogs to the early solar system. Observations of organic molecules in the protoplanetary disks surrounding T Tauri stars are important for characterizing the chemical and physical processes that lead to planet formation. Searches for undetected molecules, particularly in the inner, planet forming regions of these disks are important for testing protoplanetary disk chemical models and for understanding the evolution of volatiles through the star and planet formation process. We used NIRSPEC on Keck 2 to perform a high resolution (λ/Δλ ∼ 25,000) L-band survey of T Tauri star GV Tau N. This object is one of two in which the simple organic molecules HCN and C{sub 2}H{sub 2} have been reported in absorption in the warm molecular layer of the protoplanetary disk. In this Letter, we report the first detection of methane, CH{sub 4}, in a protoplanetary disk. Specifically, we detected the ν{sub 3} band in absorption. We determined a rotational temperature of 750 ± 50 K and column density of (2.8 ± 0.2) × 10{sup 17} cm{sup –2}. Our results imply that CH{sub 4} originates in the warm molecular layer of the inner protoplanetary disk.

79 ASTRONOMY AND ASTROPHYSICS↗

A Radiation-Hard 8-Channel 15-Bit 40-MSPS ADC for the ATLAS Liquid Argon Calorimeter Readout

The custom design of a radiation-hardened, 8-channel, 40-MSPS, 15-bit resolution, 14.2-bit dynamic range, 11.4-ENOB ADC data acquisition ASIC fabricated in a commercial 65-nm triple-well CMOS technology is presented. The ADC is developed for and integrates seamlessly into the readout system for the ATLAS liquid argon (LAr) calorimeter in the high-luminosity large hadron collider (HLLHC) upgrade at CERN, which will require a total of 364 936 ADC channels. A three-stage MDAC+SAR pipelined ADC architecture was designed to meet the physics requirements and scientific goals of the ATLAS experiment. The ADC is a fully self-contained data acquisition system that includes foreground calibration, digital data processing, digital control, and supporting circuitry. The measured performance shows the ADC achieves a competitive dynamic range and SNDR, and it meets or exceeds the ATLAS analog requirements. Radiation tolerance and scalability design considerations were implemented at the device-, circuit-, and system-level. Radiation-hardening-by-design techniques used include redundancy for digital circuits, the use of MiM capacitors, and a hybrid RC-DAC for the ADC core. The ADC ASIC was demonstrated to be robust against the effects of the intense radiation expected in the HL-LHC experimental environment.

DAQ↗

Design methodology: edgeless 3D ASICs with complex in-pixel processing for pixel detectors

The design methodology for the development of 3D integrated edgeless pixel detectors with in-pixel processing using Electronic Design Automation (EDA) tools is presented. A large area 3 tier 3D detector with one sensor layer and two ASIC layers containing one analog and one digital tier, is built for x-ray photon time of arrival measurement and imaging. A full custom analog pixel is 65μm x 65μm. It is connected to a sensor pixel of the same size on one side, and on the other side it has approximately 40 connections to the digital pixel. A 32 x 32 edgeless array without any peripheral functional blocks constitutes a sub-chip. The sub-chip is an indivisible unit, which is further arranged in a 6 x 6 array to create the entire 1.248cm x 1.248cm ASIC. Each chip has 720 bump-bond I/O connections, on the back of the digital tier to the ceramic PCB. All the analog tier power and biasing is conveyed through the digital tier from the PCB. The assembly has no peripheral functional blocks, and hence the active area extends to the edge of the detector. This was achieved by using a few flavors of almost identical analog pixels (minimal variation in layout) to allow for peripheral biasing blocks to be placed within pixels. The 1024 pixels within a digital sub-chip array have a variety of full custom, semi-custom and automated timing driven functional blocks placed together. The methodology uses a modified mixed-mode on-top digital implementation flow to not only harness the tool efficiency for timing and floor-planning but also to maintain designer control over compact parasitically aware layout. The methodology uses the Cadence design platform, however it is not limited to this tool.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Wind Supply Chain Security: Hardware Enumeration and Analysis

This project, undertaken by Idaho National Laboratory (INL) for the Department of Energy (DOE) Wind Energy Technologies Office (WETO), focused on the enumeration and analysis of six key devices important to wind technologies. The devices analyzed included Beckhoff Bus Terminal Controllers (BK1120 and BC9000), a Beckhoff Economy Built-in Panel PC (CP6231), an N-Tron Managed Industrial Ethernet Switch (711FX3), a Bachmann M1 Gateway, and a Bachmann Smart Power Plant Controller. Device selection was driven by availability and budget constraints, with several components sourced from existing wind farms and others procured through a co-agreement with another WETO-funded project. The project's primary objective was to create a hardware bill of materials (HBOM) for each device, identifying and documenting all components to assess potential security and supply chain risks. A detailed analysis revealed over 750 unique components across the six devices, with 80% successfully identified and accompanied by datasheets. Notably, Texas Instruments emerged as the leading supplier, providing over 16% of the components, followed by ON Semiconductor at 11.3%, Analog Devices at 5.3%, and Renesas Electronics Corp at 4.1%. Other notable vendors included Toshiba Corporation, iC-Haus Corporation, Atmel, Vishay, and STMicroelectronics. The enumeration process involved thorough documentation of each component, including its designation, quantity, identifiers, pin package, description, vendor, model, and country of origin. This process provided valuable insights into the complexity and diversity of the electronic systems within these wind devices. It also highlighted the distinct separation of components between vendors, suggesting a trend of vendor-specific component usage. Key findings from the project emphasized the importance of broadening the scope of vendor analysis in future research to gain a comprehensive understanding of component distribution and commonality. The identification of vendor-specific component usage patterns offers new avenues for research and underscores the significance of continued investigation in this field. Overall, this project provides critical insights into the component composition of wind devices, aiding in the development of improved supply chain management and component sourcing strategies. The results contribute valuable knowledge to the wind technology sector, laying the groundwork for enhanced security and resilience in wind energy systems.

17 - WIND ENERGY↗

An Artificial Intelligence-Assisted Method for Dementia Detection Using Images from the Clock Drawing Test

Background: Widespread dementia detection could increase clinical trial candidates and enable appropriate interventions. Since the Clock Drawing Test (CDT) can be potentially used for diagnosing dementia-related disorders, it can be leveraged to develop a computer-aided screening tool. Objective: To evaluate if a machine learning model that uses images from the CDT can predict mild cognitive impairment or dementia. Methods: Images of an analog clock drawn by 3,263 cognitively intact and 160 impaired subjects were collected during in-person dementia evaluations by the Framingham Heart Study. We processed the CDT images, participant’s age, and education level using a deep learning algorithm to predict dementia status. Results: When only the CDT images were used, the deep learning model predicted dementia status with an area under the receiver operating characteristic curve (AUC) of 81.3% ± 4.3%. A composite logistic regression model using age, level of education, and the predictions from the CDT-only model, yielded an average AUC and average F1 score of 91.9% ±1.1% and 94.6% ±0.4%, respectively. Conclusion: Our modeling framework establishes a proof-of-principle that deep learning can be applied on images derived from the CDT to predict dementia status. When fully validated, this approach can offer a cost-effective and easily deployable mechanism for detecting cognitive impairment.

Neurosciences & Neurology↗

Stereoscopic computer graphics display system

Handbook was published on study which describes relative merits of two general-purpose, steroscopic display systems. Both systems are adaptable to most small data processing facilities and, with minimal hardware development, greatly enhance user ability to interact with computer and to interpret data output. Section also describes digital-to-analog converters designed for use with system.

Plott, H. H., Jr.↗

The use of multispectral sensing techniques to detect ponderosa pines trees under stress from insects or diseases

The detection of stress induced by bark beetles in conifers is reviewed in two sections: (1) the analysis of very small scale aerial photographs taken by NASA's RB-57F aircraft on August 10, 1969, and (2) the analysis of multispectral imagery obtained by the optical-mechanical line scanner. Underexposure of all films taken from the RB-57 aircraft and inadequate flight coverage prevented drawing definitive conclusions regarding optimum scales and film combinations to detect the discolored infestations. Preprocessing of the scanner signals by both analog and digital computers improved the accuracy of target recognition. Selection and ranking of the best channels for signature recognition was the greatest contribution of digital processing. Improvements were made in separating hardwoods from conifers and old-kill pine trees from recent discolored trees and from healthy trees, but accuracy of detecting the green infested trees is still not acceptable on either the SPARC or thermal-contouring processor. From six years of experience in processing line scan data it is clear that the greatest gain in previsual detection of stress will occur when registered multispectral data from a single aperture or common instantaneous field of view scanner system can be collected and processed.

Heller, R. C.↗

Sequential decision analysis for nonstationary stochastic processes

A formulation of the problem of making decisions concerning the state of nonstationary stochastic processes is given. An optimal decision rule, for the case in which the stochastic process is independent of the decisions made, is derived. It is shown that this rule is a generalization of the Bayesian likelihood ratio test; and an analog to Wald's sequential likelihood ratio test is given, in which the optimal thresholds may vary with time.

Schaefer, B.↗

Alaskan thermokarst terrain and possible Martian analog

A first-order analog to Martian fretted terrain has been recognized on enhanced, ERTS-1 (Earth Resources Technology Satellite) imagery of Alaskan Arctic thermokarst terrain. The Alaskan analog displays flat-floored valleys and intervalley uplands characteristic of fretted terrain. The thermokarst terrain has formed in a manner similar to one of the processes postulated for the development of the Martian fretted terrain.

Gatto, L. W.↗

Endosymbionts and mitochondrial origins

The possibility is put forth that the mitochondrion did not originate from an endosymbiosis 1-2 billion years ago involving an aerobic bacterium. Rather, it arose by endosymbiosis in a much earlier anaerobic period and was initially a photosynthetic organelle analogous to the modern chloroplast. This suggestion arises from a reconsideration of the nature of endosymbiosis. It explains the remarkable diversity in mitochondrial information storage and processing systems.

Woese, C. R.↗

Aerospace technology can be applied to exploration 'back on earth'

Applications of aerospace technology to petroleum exploration are described. Attention is given to seismic reflection techniques, sea-floor mapping, remote geochemical sensing, improved drilling methods and down-hole acoustic concepts, such as down-hole seismic tomography. The seismic reflection techniques include monitoring of swept-frequency explosive or solid-propellant seismic sources, as well as aerial seismic surveys. Telemetry and processing of seismic data may also be performed through use of aerospace technology. Sea-floor sonor imaging and a computer-aided system of geologic analogies for petroleum exploration are also considered.

Jaffe, L. D.↗

Petrography and petrology of basaltic achondrite polymict breccias /Howardites/

The reported investigation is based on the results from petrographic observations, electron microprobe analyses of constituent phases, and defocused beam analyses of clasts and glasses. Howardites consist of mostly angular-to-rounded mineral, rock, and breccia clasts compacted in variable grain-sized matrices of finely comminuted materials. Attention is given to ophitic and subophitic rocks, granular basalts and microgabbros, mafic rocks, Al-rich rocks, breccia clasts, impact melt rocks, glasses, meteorite clasts, bulk composition, particle size distribution, howardite component composition, questions of breccia formation, and parent body implications. It is found that the four main rock types found in howardites do have certain analogies to lunar rocks. It is tempting to speculate that both the moon and the basaltic achondrite parent body formed similar rock suites in their evolutionary processes.

Bunch, T. E.↗

Venus topography: Clue to hot-lithosphere tectonics?

The topography of Venus is studied in order to learn about hot lithosphere tectonic processes of Archean Earth. Except for the difference in H2O abundances (Archaen Earth was wet; modern Venus is very dry), linear zones on Venus may be analogous to the tectonic settings for some Archean greenstone belts.

Mcgill, G. E.↗

Optical processing and Space Station automation

Optical information processing research aimed at Space Station automation applications is reviewed. The emphasis of the NASA Ames Research Center program is on intelligent optical pattern recognition and optical control processing. Attention is given to the primary functions of an overall scene understanding system: distortion-invariant optical feature generation, dimensionality reduction, object classification, and contextual information processing. A method of using synthetic discriminant functions to facilitate learning in a high-speed optical correlator is described. A discussion is presented of candidate analog and digital architectures for the optical implementation of state-estimation algorithms needed for the control of high-dimension dynamic systems. The multivariate system chosen for the optical control technology demonstration - a segmented, adaptive mirror and interferometrically based wavefront sensor - is also described.

Ennis, D. J.↗

Signatures of aging silicate dust

A self-consistent explanation for the width, strength, and position of spectral features which may be diagnostic of the structure and composition of circumstellar and interstellar silicate grains is presented based on a long series of laboratory experiments using simple oxide analogs. The ratio of the integrated absorption strength of the grains near 10 mu to that near 20 mu is shown to decrease monotonically with increased processing. This ratio may be diagnostic of the relative age of the silicate. The oxidation state of iron in the grains is directly related to both the near-IR grain opacity and enhanced absorption in the UV. The oxidation state of both iron and silicon is directly related to the rate of nucleation, growth, and processing in a circumstellar outflow, as well as to the processing history of the grain after it reaches the interstellar medium. Other diagnostic indicators of the average silicon oxidation state, degree of structural polymerization, and dispersion in the average degree of structural polymerization are discussed.

Nuth, Joseph A., III↗

A minimalist approach to receiver architecture

New signal processing techniques are described for Deep Space Network radios and a proposed receiver architecture is presented, as well as experimental results on this new receiver's analog front end. The receiver's design employs direct downconversion rather than high speed digitization, and it is just as suitable for use as a space based probe relay receiver as it is for installation at a ground antenna. The advantages of having an inexpensive, shoe box size receiver, which could be carried around to antennas of opportunity, used for spacecraft testing or installed in the base of every antenna in a large array are the force behind this project.

Collins, O.↗