Search NASA⌕ Search

SEARCH · Search NASA

Results for “CS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Proposed Products to Support Shelter-Evacuation Decision Making in the Event of a Nuclear Detonation

Response strategies implemented in the first few hours to days after a nuclear detonation on the US homeland may save more than 100,000 lives. Effective planning and pre-event capability development can increase the response efficacy and so the number of lives saved. During such an event, the US Department of Defense, Joint Task Force Civil Support (DoD JTF-CS) provides command and control for the DoD forces supporting civil authority response operations. Among other activities, JTF-CS expects to support FEMA as well as State and local agencies in shelter and evacuation response activities. JTF-CS currently uses a manual method to generate evacuation decision making products. This method compares the dose that would be (a) acquired remaining at a given location to that (b) acquired during evacuation along a small number of routes. In these products, evacuation may be warranted when the projected “remain” dose is greater than the “evacuate” dose. This method only provides a limited consideration of the protection buildings provide their occupants. To inform the JTF-CS nuclear detonation response, the DoD Defense Threat Reduction Agency (DTRA) has tasked Lawrence Livermore National Laboratory (LLNL) to design a set of planning and response products to support shelter-evacuation activities. This report documents these products to facilitate DTRA and JTF-CS planning efforts. To provide context, we also provide appendices that summarize US planning guidance response zones, early (<72 h) response strategies, and other key topics.

61 RADIATION PROTECTION AND DOSIMETRY↗

Multi-scale fission product release model with comparison to AGR data

TRistructural ISOtropic (TRISO) particle fuel is central to several advanced, high-temperature reactor designs. Each particle consists of a fuel kernel encapsulated by three layers of carbon and ceramics that prevent the release of fission products and ensure physical integrity. Despite outstanding retention properties, fission product release has been observed from intact particles. To better understand and quantify fission product release from TRISO particles, a multiscale, mechanistic model of fission product transport is being developed by the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. Previous work focused on silver (Ag) transport and improved Ag release predictions. The work described in this report builds on this experience to better understand cesium (Cs) transport in silicon carbide (SiC), the main barrier to the release of fission products. Atomistic simulations provide bulk and grain boundary (GB) Cs diffusivities in SiC, which are used by phase field simulations in the mesoscale code Marmot to determine the temperature, microstructure, and irradiation-dependent Cs diffusivity at the mesoscale in SiC. This approach attributes the different temperature regimes experimentally observed for Cs diffusivities in SiC to a transition from bulk-dominated diffusivity at high temperatures to a GB-dominated regime at low temperatures, providing new insight. The multiscale, mechanistic effective diffusivity is then implemented in the fuel performance code BISON and further validated by comparing Cs release predictions from Advanced Gas Reactor (AGR)-1 and AGR-2 post-irradiation measurements. The new model improves BISON’s predictability. This document also reports improvements made on Ag transport modeling by accounting for different GB types having different diffusivities. Moreover, this report details preliminary efforts to model palladium (Pd) attack of the SiC at the mesoscale using a phase field approach. Pd attack and its impact on accelerated Ag transport remains a misunderstood phenomenon, and we use the model to demonstrate that the formation of lamellae that has been observed in experiments can be explained by the reaction of Pd with SiC to form alternating layers of graphite and Pd 2 Si. This effort aims to improve our understanding of the reaction and eventually provide a model for BISON to account for Pd penetration and its effects on fission product release.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Engineered Materials for Cesium and Strontium Storage Final Technical Report

Closing the nuclear fuel cycle requires reprocessing spent fuel to recover the long-lived components that still have useful energy content while immobilizing the remnant waste fission products in stable forms. At the genesis of this project, next generation spent fuel reprocessing methods were being developed as part of the U.S. Department of Energy's Advanced Fuel Cycle Initiative. One of these processes was focused on solvent extraction schemes to isolate cesium (Cs) and strontium (Sr) from spent nuclear fuel. Isolating these isotopes for short-term decay storage eases the design requirements for long-term repository disposal; a significant amount of the radiation and decay heat in fission product waste comes from Cs-137 and Sr-90. For the purposes of this project, the Fission Product Extraction (FPEX) process is being considered to be the baseline extraction method. The objective of this project was to evaluate the nature and behavior of candidate materials for cesium and strontium immobilization; this will include assessments with minor additions of yttrium, barium, and rubidium in these materials. More specifically, the proposed research achieved the following objectives (as stated in the original proposal): (1) Synthesize simulated storage ceramics for Cs and Sr using an existing labscale steam reformer at Purdue University. The simulated storage materials will include aluminosilicates, zirconates and other stable ceramics with the potential for high Cs and Sr loading. (2) Characterize the immobilization performance, phase structure, thermal properties and stability of the simulated storage ceramics. The ceramic products will be stable oxide powders and will be characterized to quantify their leach resistance, phase structure, and thermophysical properties. The research progressed in two stages. First, a steam reforming process was used to generate candidate Cs/Sr storage materials for characterization. This portion of the research was carried out at Purdue University and is detailed in Appendix A. Steam reforming proved to be too rigorous for efficient The second stage of this project was carried out at Texas A&M University and is Detailed in Appendix B. In this stage, a gentler ceramic synthesis process using Cs and Sr loaded kaolinite and bentonite clays was developed in collaboration with Dr. M. Kaminski at Argonne National Laboratory.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

New Fission-Product Waste Forms: Development and Characterization

Research performed on the program “New Fission Product Waste Forms: Development and Characterization,” in the last three years has fulfilled the objectives of the proposal which were to 1) establish ceramic waste forms for disposing of Cs, Sr and minor actinides, 2) fully characterize the phase relationships, structures and thermodynamic and kinetic stabilities of promising waste forms, 3) establish a sound technical basis for understanding key waste form properties, such as melting temperatures and aqueous durability, based on an in-depth understanding of waste form structures and thermochemistry, and 4) establish synthesis, testing, scaleup and commercialization routes for wasteform implementation through out in-kind collaborations. In addition, since Cs and Sr form new elements by radioactive decay, the behavior and thermodynamics of waste forms containing different proportions of Cs, Sr and their decay products were discovered using non-radioactive analogues. Collaborations among researchers from three institutions, UC Davis, Sandia National Laboratories, and Shott Inc., were formed to perform the primary work on the program. The unique expertise of each of the members in the areas of waste form development, structure/property relationships, hydrothermal and high temperature synthesis, crystal/glass production, and thermochemistry was critical to program success. In addition, collaborations with the Brigham Young Univeristy, Ben Gurion University, and Los Alamos National Laboratory, were established for standard entropies of ceramic waste forms, sol-gel synthesis, and high temperature synthesis. This work has had a significant impact in a number of areas. First, the studies of the thermodynamic stability of the mineral analogues provided an important technical foundation for assessment the viability of multicomponent oxide phases for Cs and Sr removal. Moreover, the thermodynamic data discovered in this program established information on the reaction pathways for the potential reaction products. The phase equilibria and thermodynamics involving the intermediates in the decay process in this program will assist in selection of the best process for Cs or Sr immobilization. In addition, data from the study can be used to develop engineering solutions for potential process upsets. Second, the glass – crystal stability of multicomponent oxide phases that were representative silicates on this program is highly distinguishable for mother compounds and decay products, thus providing a fundamental understanding on the separate effects from chemistry and from radiation. Finally, we have developed a foundation for understanding chemistry-structure-energetics relationships in titanosilicates that can be used to develop more effective materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Enhanced Performance Assessment System (EPAS) for carbon sequestration.

Carbon capture and sequestration (CCS) is an option to mitigate impacts of atmospheric carbon emission. Numerous factors are important in determining the overall effectiveness of long-term geologic storage of carbon, including leakage rates, volume of storage available, and system costs. Recent efforts have been made to apply an existing probabilistic performance assessment (PA) methodology developed for deep nuclear waste geologic repositories to evaluate the effectiveness of subsurface carbon storage (Viswanathan et al., 2008; Stauffer et al., 2009). However, to address the most pressing management, regulatory, and scientific concerns with subsurface carbon storage (CS), the existing PA methodology and tools must be enhanced and upgraded. For example, in the evaluation of a nuclear waste repository, a PA model is essentially a forward model that samples input parameters and runs multiple realizations to estimate future consequences and determine important parameters driving the system performance. In the CS evaluation, however, a PA model must be able to run both forward and inverse calculations to support optimization of CO{sub 2} injection and real-time site monitoring as an integral part of the system design and operation. The monitoring data must be continually fused into the PA model through model inversion and parameter estimation. Model calculations will in turn guide the design of optimal monitoring and carbon-injection strategies (e.g., in terms of monitoring techniques, locations, and time intervals). Under the support of Laboratory-Directed Research & Development (LDRD), a late-start LDRD project was initiated in June of Fiscal Year 2010 to explore the concept of an enhanced performance assessment system (EPAS) for carbon sequestration and storage. In spite of the tight time constraints, significant progress has been made on the project: (1) Following the general PA methodology, a preliminary Feature, Event, and Process (FEP) analysis was performed for a hypothetical CS system. Through this FEP analysis, relevant scenarios for CO{sub 2} release were defined. (2) A prototype of EPAS was developed by wrapping an existing multi-phase, multi-component reservoir simulator (TOUGH2) with an uncertainty quantification and optimization code (DAKOTA). (3) For demonstration, a probabilistic PA analysis was successfully performed for a hypothetical CS system based on an existing project in a brine-bearing sandstone. The work lays the foundation for the development of a new generation of PA tools for effective management of CS activities. At a top-level, the work supports energy security and climate change/adaptation by furthering the capability to effectively manage proposed carbon capture and sequestration activities (both research and development as well as operational), and it greatly enhances the technical capability to address this national problem. The next phase of the work will include (1) full capability demonstration of the EPAS, especially for data fusion, carbon storage system optimization, and process optimization of CO{sub 2} injection, and (2) application of the EPAS to actual carbon storage systems.

54 ENVIRONMENTAL SCIENCES↗

High levels of exfoliated fragments following glycocalyx destruction in hemorrhagic fever with the renal syndrome are associated with mortality risk

Background The glycocalyx is a gel-like structure that covers the luminal side of vascular endothelial cells. It plays an important role in maintaining the integrity of the vascular endothelial barrier structure. However, the presence or absence of glycocalyx destruction in hemorrhagic fever with renal syndrome (HFRS) and its specific mechanism and role is still unclear. Methods In this study, we detected the levels of exfoliated glycocalyx fragments, namely, heparan sulfate (HS), hyaluronic acid (HA), and chondroitin sulfate (CS), in HFRS patients and investigated their clinical application value on the evaluation of disease severity and prognosis prediction. Results The expression of exfoliated glycocalyx fragments in plasma was significantly increased during the acute stage of HFRS. The levels of HS, HA, and CS in HFRS patients during the acute stage were significantly higher than in healthy controls and convalescent stages of the same type. HS and CS during the acute stage gradually increased with the aggravation of HFRS, and both fragments showed a significant association with disease severity. In addition, exfoliated glycocalyx fragments (especially HS and CS) showed a significant correlation with conventional laboratory parameters and hospitalization days. High levels of HS and CS during the acute phase were significantly associated with patient mortality and demonstrated an obvious predictive value for the mortality risk of HFRS. Conclusion Glycocalyx destruction and shedding may be closely associated with endothelial hyperpermeability and microvascular leakage in HFRS. The dynamic detection of the exfoliated glycocalyx fragments may be beneficial for the evaluation of disease severity and prognosis prediction in HFRS.

Du, Hong↗

Effect of Different Lignocellulosic Diets on Bacterial Microbiota and Hydrolytic Enzyme Activities in the Gut of the Cotton Boll Weevil (Anthonomus grandis)

Cotton boll weevils, Anthonomus grandis, are omnivorous coleopteran that can feed on diets with different compositions, including recalcitrant lignocellulosic materials. We characterized the changes in the prokaryotic community structure and the hydrolytic activities of A. grandis larvae fed on different lignocellulosic diets. A. grandis larvae were fed on three different artificial diets: cottonseed meal (CM), Napier grass (NG) and corn stover (CS). Total DNA was extracted from the gut samples for amplification and sequencing of the V3-V4 hypervariable region of the 16S rRNA gene. Proteobacteria and Firmicutes dominated the gut microbiota followed by Actinobacteria, Spirochaetes and a small number of unclassified phyla in CM and NG microbiomes. In the CS feeding group, members of Spirochaetes were the most prevalent, followed by Proteobacteria and Firmicutes. Bray–Curtis distances showed that the samples from the CS community were clearly separated from those samples of the CM and NG diets. Gut extracts from all three diets exhibited endoglucanase, xylanase, β-glucosidase and pectinase activities. These activities were significantly affected by pH and temperature across different diets. We observed that the larvae reared on a CM showed significantly higher activities than larvae reared on NG and CS. We demonstrated that the intestinal bacterial community structure varies depending on diet composition. Diets with more variable and complex compositions, such as CS, showed higher bacterial diversity and richness than the two other diets. In spite of the detected changes in composition and diversity, we identified a core microbiome shared between the three different lignocellulosic diets. These results suggest that feeding with diets of different lignocellulosic composition could be a viable strategy to discover variants of hemicellulose and cellulose breakdown systems.

16S rRNA gene↗

SUBMILLIMETER OBSERVATION OF JUPITER’S STRATOSPHERIC COMPOSITION: DETECTION OF CARBON MONOSULFIDE (J = 7 − 6) 19 YEARS AFTER THE COMETARY IMPACT

In Jupiter's stratosphere, gaseous carbon monosulfide (CS) was first discovered in 1994 by millimeter and ultraviolet observations as a product induced by the collision of comet Shoemaker–Levy 9 (SL9). To constrain sulfur chemistry, in 2013, 19 years after the SL9 event, we observed Jupiter's stratospheric CS J = 7 − 6 rotational transition at 0.8 mm wavelength by using the Atacama Submillimeter Telescope Experiment 10 m single-dish telescope. The CS molecular line was successfully detected with 120 mK intensity in the antenna temperature scale. The obtained CS total mass shows ∼90% decrease relative to that observed in 1998. From the line shape analysis, CS is suggested to be present above the 0.2{sub −0.15}{sup +0.4} mbar pressure level, which is comparable to that determined in 1998.

79 ASTRONOMY AND ASTROPHYSICS↗

Elucid—exploring the local universe with reconstructed initial density field. III. Constrained simulation in the sdss volume

A method we developed recently for the reconstruction of the initial density field in the nearby universe is applied to the Sloan Digital Sky Survey Data Release 7. A high-resolution N-body constrained simulation (CS) of the reconstructed initial conditions, with 3072{sup 3} particles evolved in a 500 h{sup −1} Mpc box, is carried out and analyzed in terms of the statistical properties of the final density field and its relation with the distribution of Sloan Digital Sky Survey galaxies. We find that the statistical properties of the cosmic web and the halo populations are accurately reproduced in the CS. The galaxy density field is strongly correlated with the CS density field, with a bias that depends on both galaxy luminosity and color. Our further investigations show that the CS provides robust quantities describing the environments within which the observed galaxies and galaxy systems reside. Cosmic variance is greatly reduced in the CS so that the statistical uncertainties can be controlled effectively, even for samples of small volumes.

79 ASTRONOMY AND ASTROPHYSICS↗

Evidence for the Evolution of Grain Properties in the NGC 2024 Star Forming Ridge

High-resolution images of the NGC 2024 molecular ridge in CS(2-1) and 3 mm continuum emission have been obtained using the Owens Valley millimeter array. The data are used to determine the temperature and dynamics of the ridge, and to ascertain the evolutionary state of the embedded protostars FIR2-7. Dust continuum emission is detected from all six FIR sources. The CS(2-1) follows the ridge closely, but does not always coincide with the FIR sources. Direct comparison of column density estimates derived from the CS and the dust emission in the ridge shows that for all FIR sources except FIR5 both methods are in agreement to within a factor of two, assuming a dust opacity k(sub 3 mm) = 0.01 cm(exp 2)/g. However, away from the FIR sources strong CS(1-0) emission is observed in several compact clumps which, with the above dust opacity, should have been detected in 3 mm dust continuum. The brightness temperature of the CS, approx. 40 K, rules out the possibility that the high line-to-continuum ratio is due to low gas temperatures; the discrepancy can be resolved if k(sub 3 mm) is a factor of 10 lower away from the FIR sources. A new high-resolution image of the 450-micron dust continuum emission obtained using the James Clerk Maxwell Telescope supports this hypothesis. These results suggest an evolution in the physical properties of the dust grains, possibly grain size, between quiescent regions in the ridge and the sites of active star formation.

Chandler, C. J.↗

Rotational Energy Transfer and Collisional Induced Raman Linewidths in N2 Gas: Energy Transfer Rates - 1

Rotationally inelastic transitions of N2 have been studied in the coupled state (CS) and infinite-order-sudden (IOS) approximations, using the N2-N2 rigidrotor potential of van der Avoird et al. For benchmarking purposes, close coupling (CC) calculations have also been carried out over a limited energy range. The CC and CS cross sections have been obtained both with and without identical molecule exchange symmetry, whereas exchange was neglected in the IOS calculations. The CS results track the CC cross sections rather well; between 113 - 219 cm(exp -1) the average deviation is 14%. Comparison between the CS and IOS cross sections at the high energy end of the CS calculation, 500 - 680 cm(exp -1), shows that IOS is sensitive to the amount of inelasticity and the results for large DELTA J transitions are subject to larger errors. It is found that the state-to-state cross sections with even and odd exchange symmetry agree to better than 2% and are well represented as a sum of direct and exchange cross sections for distinguishable molecules, an indication of the applicability of a classical treatment for this system. This result, however, does not apply to partial cross sections for given total J, but arises from a near cancellation in summing over partial waves. In order to use rigid-rotor results for the calculation of effective rotational excitation rates of N2 in the v=1 vibrational level colliding with bath N2 molecules in the v=0 level, it is assumed that exchange scattering between molecules in different vibrational levels is negligible and direct scattering is independent of Y. Good agreement with room temperature experimental data is obtained. The effective rates determined using the IOS and energy corrected sudden (ECS) approximations are also in reasonable agreement with experiment, with the ECS results being somewhat better. The problem with a degeneracy factor in earlier cross section expressions for collisions between identical molecules is pointed out and corrected.

Huo, Winifred M.↗

Structure and Dynamics of the Quiet Solar Chromosphere

The grant supported research on the structure of the quiet, nonmagnetic chromosphere and on wave excitation and propagation in both the nonmagnetic chromosphere and the magnetic network. The work on the structure of the chromosphere culminated in the recognition that between two competing views of the solar chromosphere, older models by Avrett and collaborators (referred to as VAL) and the newer, dynamical model by Carlsson & Stein (referred to as CS), the clear decision is in favor of the older models, and this in spite of the evident lack of physics, which does not include wave motion and oscillations. The contrast between the static VAL models and the dynamical CS model can be stated most succinctly by comparing the temperature variation implied by the VAL models and the temperature fluctuations of the CS model, which are, respectively, of the order of 10% for the VAL model (at heights where hydrogen is 50% ionized) and a factor of 10 (at the upper boundary of their chromospheric model). The huge fluctuations of the CS model have never been observed, whereas the smaller temperature variations of the VAL models are consistent with ground-based and space-based observations. While it should be obvious which model describes the Sun and which one fails, the case is far from settled in the minds of solar physicists. Thus, much educational work remains to be done and, of course, more research to develop arguments that make the case more convincing. The research on waves and oscillations has been based on a unified theory of excitation of acoustic waves in the field-free atmosphere and of transverse and longitudinal waves in magnetic flux tubes located in the magnetic network by noting, first, that impulsive excitation of all these waves in gravitationally stratified media leads to oscillations at the respective cutoff frequencies and, second, that the observed oscillation frequencies in the nonmagnetic and magnetic parts of the chromosphere match corresponding cutoff frequencies in the upper solar photosphere. The dynamical simulations by Carlsson and Stein have been most instructive and of fundamental importance for understanding wave propagation in a stratified medium by their "flaws", the most important of which is an intensity excess at the H2v emission peak in the H line of Ca II, which is surprising since the observed intensity should have been an upper limit to the simulated intensity. The only plausible explanation for a predicted intensity that is higher than observed is that energy is spread horizontally in upward propagation in the Sun, but not in the plane-wave modeling of CS (as well as by almost everyone else). Investigations of the horizontal size of the region disturbed by the upward-propagating shock in the acoustic-wave propagation implies that the waves in H2v bright-point oscillations emanate from a point source with a diameter corresponding to the width of an intergranular lane, about 100 km, and reach a size of about 4000 km in the upper layers of the chromosphere. Linear, analytic modeling of waves emanating from a point source in a stratified atmosphere shows that the upward-expanding propagation channel does not have sharp boundaries and that the shape of the wave front depends on the order of the wave behind the initial pulse. Otherwise, the behavior of the linear waves resembles that of the nonlinear shock waves observed in the Sun. Research that needs to be done to firm up the conclusions reached above concerns the numerical simulations of nonlinear waves and oscillations in a three-dimensional stratified atmosphere with impulsive excitation, and observations linking directly the horizontal size of the disturbed area in upward propagation to individual waves.

Kalkofen, Wolfgang↗

Potential Basin-Scale Estimates of Arctic Snow Depth with Sea Ice Freeboards from CryoSat-2 and ICESat-2: An Exploratory Analysis

The potential of deriving snow depth estimates using differences in freeboard heights from CryoSat-2 (CS-2) and ICESat-2 (IS-2) is examined. In our analysis, we use lidar freeboard from the Airborne Topographic Mapper (ATM) on Operation IceBridge (OIB) as proxy of IS-2 total (snow plus ice) freeboard. Snow depths are estimates from the OIB snow radar. Differences in height between the total (ATM) and ice (CS-2) freeboards are related to snow depth by the refractive index of the snow layer, which is dependent on snow density. For two years (2014 and 2015), regression of the ATM and CS-2 freeboard differences against OIB snow depth gives correlations of approximately 0.80, estimated eta (sub s) of 1.21, and standard errors of 8 centimeters. The resulting refractive index, eta (sub s), can be compared to that expected of the Arctic snow cover in early spring (1.25 plus or minus 0.05). The expected biases and variability in the regression analysis are discussed. Results suggest that snow depth can be estimated from the freeboard differences. The benefits of adjusting the orbit of CS-2 for providing more optimized overlaps between IS-2 and CS-2 are considered.

Sea ice↗

A Radiatively Driven Wind from the ηTel Debris Disk

We present far- and near-ultraviolet absorption spectroscopy of the ∼23 Myr edge-on debris disk surrounding the A0V star η Telescopii, obtained with the Hubble Space Telescope Space Telescope Imaging Spectrograph. We detect absorption lines from C I, C II, O I, Mg II, Al II, Si II, S II, Mn II, Fe II, and marginally N I. The lines show two clear absorption components at −22.7 ± 0.5 km s −1 and −17.8 ± 0.7 km s −1 , which we attribute to circumstellar (CS) and interstellar gas, respectively. CO absorption is not detected, and we find no evidence for star-grazing exocomets. The CS absorption components are blueshifted by −16.9 ± 2.6 km s −1 in the star’s reference frame, indicating that they are outflowing in a radiatively driven disk wind. We find that the C/Fe ratio in the η Tel CS gas is significantly higher than the solar ratio, as is the case in the β Pic and 49 Cet debris disks. Unlike those disks, however, the measured C/O ratio in the η Tel CS gas is consistent with the solar value. Our analysis shows that because η Tel is an earlier type star than β Pic and 49 Cet, with more substantial radiation pressure at the dominant C II transitions, this species cannot bind the CS gas disk to the star as it does for β Pic and 49 Cet, resulting in the disk wind.

Allison Youngblood↗

Characteristics of Multi-scale Current Sheets in the Solar Wind at 1 au Associated with Magnetic Reconnection and the Case for a Heliospheric Current Sheet Avalanche

Wind spacecraft measurements are analyzed to obtain a current sheet (CS) normal width dcs-distribution of 3374 confirmed magnetic reconnection exhausts in the ecliptic plane of the solar wind at 1 AU. The dcs-distribution displays a nearly exponential decay from a peak at dcs=25 di to a median at dcs=85 di and a 95th percentile at dcs=905 di with a maximum exhaust width at dcs=8077 di. A magnetic field ϴ-rotation angle distribution increases linearly from a relatively few high-shear events toward a broad peak at 35o<ϴ<65o. The azimuthal φ-angles of the CS normal directions of 430 thick dcs≥500 di exhausts are consistent with a dominant Parker-spiral magnetic field and a CS normal along the ortho-Parker direction. The CS normal orientations of 370 kinetic-scale dcs<25 di exhausts are isotropic in contrast, and likely associated with Alfvénic solar wind turbulence. We propose that the alignment of exhaust normal directions from narrow dcs~15-25 di widths to well beyond dcs~500 di with an ortho-Parker azimuthal direction of a large-scale HCS is a consequence of CS bifurcation and turbulence within the HCS exhaust that may trigger reconnection of the adjacent pair of bifurcated CSs. The proposed HCS-31 avalanche scenario suggests that the underlying large-scale parent HCS closer to the Sun evolves with heliocentric distance to fracture into many, more or less aligned, secondary current sheets due to reconnection. A few wide exhaust-associated HCS-like CSs could represent a population of HCSs that failed to reconnect as frequently between the Sun and 1 AU as other HCSs.

Stefan Eriksson↗

Phase II and III Solid Waste Management Unit Assessment and Confirmatory Sampling Report for Per- and Polyfluorinated Alkyl Substances, Potential Release Location 237, Kennedy Space Center, Florida

Per- and polyfluoroalkyl substances (PFAS) Phase II and III Solid Waste Management Unit (SWMU) Assessment (SA) and Confirmatory Sampling (CS) were conducted at the John F. Kennedy Space Center (KSC), Potential Release Location (PRL) 237, located in Merritt Island, Brevard County, Florida for the National Aeronautics and Space Administration (NASA) under Contract 80KSC019D0010/80KSC019F0289. A Phase I SA and CS Report was previously submitted that identified 33 locations of concern (LOCs) at KSC associated with the storage, use, or release of materials containing PFAS. The objectives of the Phase II and III SA and CS were to: - Complete site and source characterization of identified LOCs; - Identify areas of potential concern (AOPCs) where past or present activities may have resulted in a release of PFAS to the environment; - Qualitatively characterize migration potential of released PFAS to environmental media (primarily soil, groundwater, surface water, and sediment); and - Identify potential receptors for exposure to PFAS-impacted environmental media. Surface water samples were collected from LOCs/AOPCs and locations on the KSC periphery during PFAS CS Phases I, II and III. Including duplicate samples, 143 environmental samples were analyzed for 14 PFAS compounds and 104 environmental samples were analyzed for 18 PFAS compounds. Ten of the analytes on the 14 compound list were detected at least once in surface water at KSC, with a wide range in magnitude of detections. The State of Florida has surface water screening levels (SWSLs) for perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS) in surface water, both for human and ecological receptors. The human health screening levels are lower than the ecological ones and are used in this report. PFOA was not detected in surface water at concentrations exceeding the SWSL at any LOC or Area of Potential Concern (AOPC). PFOS was detected in surface water at concentrations exceeding the SWSL at 28 LOCs/AOPCs, plus 42 locations on the KSC periphery. The data suggest a wide distribution of PFAS, particularly PFOS, in surface water but the sources of surface water contamination are not yet adequately understood. Sediment samples were collected during Phases II and III but not Phase I. Including duplicate samples, 104 environmental samples were analyzed for 14 PFAS compounds and 10 environmental samples were analyzed for 18 PFAS compounds. Twelve compounds were detected in sediment at KSC, with a wide range in magnitude of detections. There are currently no screening levels or cleanup target levels (CTLs) for sediment. The need to delineate and further characterize PFAS in sediment will be evaluated for those sites that move forward into Site Assessment. Groundwater samples were collected via DPT from LOCs/AOPCs and locations on the KSC periphery during PFAS CS Phases I, II and III. Including duplicate samples, 812 environmental DPT groundwater samples were analyzed for 14 PFAS compounds and 247 environmental samples were analyzed for 18 PFAS compounds. Twelve of the 14 compounds were detected in groundwater at KSC, with a wide range in magnitude of detections. The State of Florida has provisional groundwater cleanup target levels (GCTLs) for PFOA, PFOS and the additive concentration of PFOA+PFOS. PFOA was detected in groundwater at concentrations exceeding its provisional GCTL at 16 LOCs/AOPCs, with no exceedances on the KSC periphery. PFOS was detected in groundwater at concentrations exceeding its provisional GCTL at 30 LOCs/AOPCs, plus two locations on the KSC periphery. PFOA+PFOS was detected in groundwater at concentrations exceeding the provisional GCTL at 31 LOCs/AOPCs, plus two locations on the KSC periphery. Soil samples were collected during Phases II and III but not Phase I. Including duplicate samples, 292 environmental samples were analyzed for 14 PFAS compounds and 80 environmental samples were analyzed for 18 PFAS compounds. Fourteen compounds were detected in soil at KSC, with a wide range in magnitude of detections. The State of Florida has provisional soil cleanup target levels (SCTLs) for PFOA and PFOS. There were no PFOA results above its provisional SCTL. There was one LOC with a result above the provisional SCTL for residential settings. Recommendations are presented for each LOC and AOPC.

PFAS↗

Surface Plasma Source Electrode Activation by Surface Impurities

In experiments with RF saddle antenna surface plasma sources (SPS), the efficiency of H- ion generation was increased by up to a factor of 5 by long time plasma electrode activation, without adding Cs from Cs supply, by heating the collar to high temperature using hot air flow and plasma discharge. Without cracking or heating the cesium ampoule, but likely with Cs recovery from impurities, the achieved energy efficiency was comparable to that of conventionally cesiated SNS RF sources with an external or internal Cs supply. In the experiments, perfect cesiation was produced (without additional Cs supply) by the collection and trapping of traces of remnant cesium compounds from SPS surfaces.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of the bus joint for the ITER Central Solenoid

The terminations of the Central Solenoid (CS) modules are connected to the bus extensions by joints located outside the CS in the gap between the CS and Torodial Field (TF) assemblies. These joints have very strict space limitations. Low resistance is a common requirement for all ITER joints. In addition, the CS bus joints will experience and must be designed to withstand significant variation in the magnetic field of several tenths of a Tesla per second during initiation of plasma. The joint resistance is specified to be less than 4 nOhm. The joints also have to be soldered in the field and designed with the possibility to be installed and dismantled in order to allow cold testing in the cold test facility. We have developed coaxial joints that meet these requirements and have demonstrated the feasibility to fabricate and assemble them in the vertical configuration. We introduced a coupling cylinder with superconducting strands soldered to the surface of the cable that can be installed in the ITER assembly hall and at the Cold Test Facility. This cylinder serves as a transition area between the CS module and the bus extension. We made two racetrack samples and tested four bus joints in our Joint Test Apparatus. Resistance of the bus joints was measured by a decay method and by a microvoltmeter; the value of the current was measured by the Hall probes. This measurement method was verified in the previous tests. The resistance of the joints varied insignificantly from 1.5 to 2 nOhm. One of the challenges associated with a soldered joint is the inability to use corrosive chemicals that are difficult to clean. This paper describes our development work on cable preparation, chrome removal, compaction, soldering, and final assembly and presents the test results.

Martovetsky, Nicolai N↗