Search NASA⌕ Search

SEARCH · Search NASA

Results for “Compositional simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Special Grain Boundaries in NiTi Shape Memory Alloys as Sites for Preferential Martensite Nucleation

Shape memory alloys (SMAs) exhibit unique thermomechanical properties due to a reversible martensitic transformation which can be controlled via chemical composition and microstructural features. Among the latter, grain boundaries (GBs) are key in determining how the transformation nucleates and propagates. We performed molecular dynamics simulations to examine the roles of a few special GBs in the austenite phase of NiTi. The GBs can act as preferential host sites for martensite nuclei which can substantially lower the nucleation barrier for transformation and thereby result in reduced thermal hysteresis, an important SMA property for cyclic actuation applications. Free energy calculations show that a characteristic of these GBs is a negative entropy which drops sharply close to the transformation temperature, an anomalous behavior for GBs with fixed composition which is a direct result of the martensitic transformation. We discuss implications of these results with respect to SMA processing techniques for achieving improved properties.

Gabriel Plummer↗

Sensitivity of Seawater Oxygen Isotopes to Climatic and Tectonic Boundary Conditions in an Early Paleogene Simulation with GISS ModelE-R

An isotope-enabled ocean-atmosphere general circulation model (GISS ModelE -R) is used to estimate the spatial gradients of the oxygen isotopic composition of seawater (delta O-18(sub sw), where delta is the deviation from a known reference material in per mil) during the early Paleogene (45.65 Ma). Understanding the response of delta O-18(sub sw) to changes in climatic and tectonic boundary conditions is important because records of carbonate delta O-18 document changes in hydrology, as well as changes in temperature and global ice -volume. We present results from an early Paleogene configuration of ModelE -R which indicate that spatial gradients of surface ocean delta O-18(sub sw) during this period could have been significantly different to those in the modern ocean. The differences inferred from ModelE -R are sufficient to change early Paleogene sea surface temperature estimates derived from primary carbonate delta O-18 signatures by more than +/-2 C in large areas of the ocean. In the North Atlantic, Indian, and Southern Oceans, the differences in d18Osw inferred from our simulation with ModelE -R are in direct contrast with those from another d18O ]tracing model study which used different, but equally plausible, early Paleogene boundary conditions. The large differences in delta O-18(sub sw) between preindustrial and early Paleogene simulations, and between models, emphasizes the sensitivity of d18Osw to climatic and tectonic boundary conditions. For this reason, absolute estimates of Eocene/ Paleocene temperature derived from carbonate delta O-18 alone are likely to have larger uncertainties than are usually assumed.

Roberts, Christopher D.↗

Characteristics of 0.8- and 0.2-microns gate length In(x)Ga(1-x) As/In(0.52)Al(0.48)As/InP (0.53 less than or equal to x less than or equal to 0.70) modulation-doped field-effect transistors at cryogenic temperatures

The performance characteristics of InP-based In(x)Ga(1-x)As/In(0.52)Al(0.48)As (0.53 is less than or equal to x is less than or equal to 0.70) pseudomorphic modulation-doped field-effect transistors (MODFET's) as a function of strain in the channel, gate, length, and temperature were investigated analytically and experimentally. The strain in the channel was varied by varying the In composition x. The temperature was varied in the range of 40-300 K and the devices have gate lengths L(sub g) of 0.8 and 0.2 microns. Analysis of the device was done using a one-dimensional self consistent solution of the Poisson and Schroedinger equations in the channel, a two-dimensional Poisson solver to obtain the channel electric field, and a Monte Carlo simulation to estimate the carrier transit times in the channel. An increase in the value of the cutoff frequency is predicted for an increase in In composition, a decrease in temperature, and a decrease in gate length. The improvements seen with decreasing temperature, decreasing gate length, and increased In composition were smaller than those predicted by analysis. The experimental results on pseudomorphic InGaAs/InAlAs MODFET's showed that there is a 15-30 percent improvement in cutoff frequency in both the 0.8- and 0.2-micron gate length devices when the temperature is lowered from 300 to 40 K.

Lai, Richard↗

Time-temperature-stress capabilities of composite materials for advanced supersonic technology application, phase 1

Implementation of metal and resin matrix composites into supersonic vehicle usage is contingent upon accelerating the demonstration of service capacity and design technology. Because of the added material complexity and lack of extensive service data, laboratory replication of the flight service will provide the most rapid method of documenting the airworthiness of advanced composite systems. A program in progress to determine the time temperature stress capabilities of several high temperature composite materials includes thermal aging, environmental aging, fatigue, creep, fracture, and tensile tests as well as real time flight simulation exposure. The program has two parts. The first includes all the material property determinations and aging and simulation exposures up through 10,000 hours. The second continues these tests up to 50,000 cumulative hours. Results are presented of the 10,000 hour phase, which has now been completed.

Kerr, J. R.↗

Solidification zoning and metallographic cooling rates of chondrites

The cooling rates of chondrites have been determined according to the cooling rate method of Wood (1967) which involves the measurement of the concentration of nickel in the interiors of taenite grains of various sizes. The present paper presents an investigation of the effect of zoning produced during solidification on the use of the Wood method. Cooling rate curves were obtained in a computer simulation based on a model of kamacite formation on the outer edge of a taenite sphere of uniform initial composition, followed by the inward radial progression of the kamacite-taenite interface. When a concentration gradient produced by solidification is present in the initial conditions, deviations from the cooling rate curves for uniform 10% Ni are obtained only at cooling rates greater than 1000 K/million years, which would result in an overestimation of the cooling rates based on observed Ni gradients in grains of radius greater than 20 microns.

Willis, J.↗

Predicted electrothermal deicing of aircraft blades

A finite difference method is presented for the transient two-dimensional simulation of an electrothermal de-icer pad of an aircraft wing or blade. The irregular geometry of the composite ice laden blade is handled by use of a body fitted coordinate transformation. By this approach the various blade layers are mapped into a set of stacked rectangular strips in which the numerical solution takes place. Several heat conduction examples are presented in order to demonstrate the accuracy of the numerical procedure. Ice melting time predictions are made and compared to earlier predictions where possible. Finally, a new graphical presentation of thermal results is shown.

Keith, T. G., Jr.↗

Cloud cover determination in polar regions from satellite imagery

The objectives are to develop a suitable validation data set for evaluating the effectiveness of the International Satellite Cloud Climatology Project (ISCCP) algorithm for cloud retrieval in polar regions, to identify limitations of current procedures and to explore potential means to remedy them using textural classifiers, and to compare synoptic cloud data from model runs with observations. Toward the first goal, a polar data set consisting of visible, thermal, and passive microwave data was developed. The AVHRR and SMMR data were digitally merged to a polar stereographic projection with an effective pixel size of 5 sq km. With this data set, two unconventional methods of classifying the imagery for the analysis of polar clouds and surfaces were examined: one based on fuzzy sets theory and another based on a trained neural network. An algorithm for cloud detection was developed from an early test version of the ISCCP algorithm. This algorithm includes the identification of surface types with passive microwave, then temporal tests at each pixel location in the cloud detection phase. Cloud maps and clear sky radiance composites for 5 day periods are produced. Algorithm testing and validation was done with both actural AVHRR/SMMR data, and simulated imagery. From this point in the algorithm, groups of cloud pixels are examined for their spectral and textural characteristics, and a procedure is developed for the analysis of cloud patterns utilizing albedo, IR temperature, and texture. In a completion of earlier work, empirical analyses of arctic cloud cover were explored through manual interpretations of DMSP imagery and compared to U.S. Air Force 3D-nephanalysis. Comparisons of observed cloudiness from existing climatologies to patterns computed by the GISS climate model were also made.

Barry, R. G.↗

Magma zonation - Effects of chemical buoyancy and diffusion

Numerical simulations and scale analysis are used to assess the viability of the marginal box-filling mechanism for producing compositional zonation in magma bodies. Scale analysis and two-dimensional numerical experiments both show that box-filling occurs provided a critical ratio of compositional-to-thermal buoyancy is exceeded. This critical ratio depends on the ratio of thermal-to-chemical diffusivity; application of this result to magma bodies suggests that box-filling may occur for components with relatively high-chemical diffusivities such as water. However, box-filling will not produce significant zonation for components with small chemical diffusivities, such as silica, unless diffusive coupling increases silica diffusivity.

Spera, Frank J.↗

Probabilistic high cycle fatigue failure analysis with application to liquid propellant rocket engines

A probabilistic high cycle fatigue (HCF) failure analysis of a welded duct in a rocket engine of the Space Shuttle main engine class is described. A state-of-the-art HCF failure prediction method was used in a Monte Carlo simulation to generate a distribution of failure lives. A stochastic stress/life model is used for material characterization, and a composite stress history is generated for accurately deriving the stress cycles for the fatigue-damage calculations. The HCF failure model expresses fatigue life as a function of stochastic parameters including environment, loads, material properties, geometry, and model specification errors. A series of HCF failure life analyses were performed to study the impact of a fixed parameter and to assess the importance of each stochastic input parameter through marginal analyses.

Sutharshana, S.↗

Structure of Laminar Permanently Blue, Opposed-Jet Ethylene-Fueled Diffusion Flames

The structure and state relationships of laminar soot-free (permanently blue) ethylene-fueled diffusion flames at various strain rates were studied both experimentally and computationally using an opposed-jet configuration. Measurements of gas velocities, temperatures, and compositions were carried out along the stagnation stream line. Corresponding predictions of flame structure were obtained, based on numerical simulations using several contemporary reaction mechanisms for methane oxidation. Flame conditions studied included ethylene-fueled opposed-jet diffusion flames having stoichiometric mixture fractions of 0.7 with measurements involving strain rates of 60-240/s and predictions involving strain rates of 0-1140/s at normal temperature and pressure. It was found that measured major gas species concentrations and temperature distributions were in reasonably good agreement with predictions using mechanisms due to GRI-Mech and Peters and that effects of preferential diffusion significantly influence flame structure even when reactant mass diffusivities are similar. Oxygen leakage to fuel-rich conditions and carbon monoxide leakage to fuel-lean conditions both increased as strain rates increased. Furthermore, increased strain rates caused increased fuel concentrations near the flame sheet, decreased peak gas temperatures, and decreased concentrations of carbon dioxide and water vapor throughout the flames. State relationships for major gas species and gas temperatures were found to exist over a broad range of strain rates, providing potential for significant computational simplifications for modeling purposes in some instances.

Lin, K.-C.↗

Structure of Laminar Permanently Blue, Opposed-Jet Ethylene-Fueled Diffusion Flames

The structure and state relationships of laminar soot-free (permanently blue) ethylene-fueled diffusion flames at various strain rates were studied both experimentally and computationally using an opposed-jet configuration. Measurements of gas velocities, temperatures, and compositions were carried out along the stagnation stream line. Corresponding predictions of flame structure were obtained, based on numerical simulations using several contemporary reaction mechanisms for methane oxidation. Flame conditions studied included ethylene-fueled opposed-jet diffusion flames having stoichiometric mixture fractions of 0.7 with measurements involving strain rates of 60-240/s and predictions involving strain rates of 0-1140/s at normal temperature and pressure. It was found that measured major gas species concentrations and temperature distributions were in reasonably good agreement with predictions using mechanisms due to GRI-Mech and Peters and that effects of preferential diffusion significantly influence flame structure even when reactant mass diffusivities are similar. Oxygen leakage to fuel-rich conditions and carbon monoxide leakage to fuel-lean conditions both increased as strain rates increased. Furthermore, increased strain rates caused increased fuel concentrations near the flame sheet, decreased peak gas temperatures, and decreased concentrations of carbon dioxide and water vapor throughout the flames. State relationships for major gas species and gas temperatures were found to exist over a broad range of strain rates, providing potential for significant computational simplifications for modeling purposes in some instances.

Lin, K.-C.↗

Prebiotic Processing induced by Comet and Meteor Impact

In their study of organic synthesis from impact shocks using the laser-induced-plasma (LIP) technique, McKay and Borucki(l) found that organic synthesis preferentially occurred in a reducing gas mixture rich in methane, and not in a mixture rich in carbon dioxide. This result means chemical models based on the thermodynamical equilibrium approach do not apply to shock chemistry. In this study, we employ the technique of reacting flow, i.e., chemical kinetics in a fluid flow, to simulate the chemistry occurring in LIP and in the wake region from comet or meteor impact. Three different air compositions have been used: (1) 1/3 CO2 and 2/3 H2, (2) pure CH4, and (3) 1/4 CH4, 1/4 CO2, and 1/2 H2O. The stoichiometric ratio of gas mixtures (1) and (3) are kept the same. For (1) we obtain equal mole fractions of CO and H2O as the major products and for (2) C2H2 is the major product. In both cases our results are in agreement with Ref. (1). For (3) we find an interesting case where the nature of chemicals produced to be critically dependent on the flowfield temperature. At the higher temperature part of the wake region, CO and H2O are the dominant products, whereas in the cooler region C2H2 is the dominant product. Further studies of these reactions, as well as for the gas mixture including N2, are being pursued.

Dateo, Christopher E.↗

Organics Synthesized Using Iron-Grain Silicates

We use Fischer-Tropsch type (FTT) synthesis to produce hydrocarbons by hydrogenating carbon monoxide via catalytic reactions. The products of these reactions have been studied using 'natural' catalysts and calculations of the efficiency of FTT synthesis in the Solar Nebula suggest that these types of reactions could make significant contributions to the composition of material near three AU. We coat Fe-silicate grains with organic material using FTT synthesis to simulate the chemistry in the early Solar Nebula. In our experimental setup, we roughly model a nebular environment where grains are successively transported from hot to cold regions of the nebula. In other words, the starting gases and FTT products are continuously circulated through the grains at high temperature with intervals of cooling. Organics generated in this manner could represent the carbonaceous material incorporated in comets and meteorites. We analyze the resulting organics and present the results.

Johnson, N. M.↗

Organics on Fe-Silicate Grains: Potential Mimicry of Meteoritic Processes?

Currently, it is unknown what exact process or combination of processes produced organics that are found in meteorites or are detected in comets and nebulas. One particular process that forms organics involves Fischer-Tropsch type (FTT) reactions. Fischer-Tropsch type reactions produce hydrocarbons by hydrogenating carbon monoxide via catalytic reactions. The overall reaction is shown. The products of these reactions have been studied using natural catalysts and calculations of the efficiency of FTT synthesis in the Solar Nebula suggest that these types of reactions could make significant contributions to the composition of material near three AU. We use FTT synthesis to coat amorphous Fesilicate grains with organic material to simulate the chemistry in the early Solar Nebula. We used lab-synthesized amorphous Fe-silicate grains for the catalyst because they might better simulate the starting materials found in protostellar nebulas. A brief description of the synthesis of these grains is given in Experiments. This work is different from previous studies because we focus here on the carbonaceous material deposited on the grains. In our experiments, we roughly simulate a model of the nebular environment where grains are successively transported from hot to cold regions of the nebula. In other words, the starting cold regions of the nebula. In other words, the starting gases and FTT products are continuously circulated through the grains at high temperature with intervals of cooling. Overall, organics generated in this manner could represent the carbonaceous material incorporated into comets and meteorites. We present the analyses of the organics produced using pyrolysis gas chromatography mass spectrometry (GCMS) and compare the results with those organics found in the Murchison meteorite.

Johnson, N. M.↗

Novel Microstructures for Polymer-Liquid Crystal Composite Materials

There are a number of interface-dominated composite materials that contain a liquid crystalline (LC) phase in intimate contact with an isotropic phase. For example, polymer- dispersed liquid crystals, used in the fabrication of windows with switchable transparency, consist of micron size LC droplets dispersed in an isotropic polymer matrix. Many other types of liquid crystal composite materials can be envisioned that might have outstanding optical properties that could be exploited in novel chemical sensors, optical switches, and computer displays. This research project was based on the premise that many of these potentially useful LC composite materials can only be fabricated under microgravity conditions where gravity driven flows are absent. In the ground-based research described below, we have focused on a new class of LC composites that we call thermotropic- lyotropic liquid crystal systems (TLLCs). TLLCs consist of nanosize droplets of water dispersed in an LC matrix, with surfactants at the interface that stabilize the structure. By varying the type of surfactant one can access almost an infinite variety of unusual LC composite microstructures. Due to the importance of the interface in these types of systems, we have also developed molecular simulation models for liquid crystals at interfaces, and made some of the first measurements of the interfacial tension between liquid crystals and water.

Magda, Jules J.↗

Thermographic Imaging of Defects in Anisotropic Composites

Composite materials are of increasing interest to the aerospace industry as a result of their weight versus performance characteristics. One of the disadvantages of composites is the high cost of fabrication and post inspection with conventional ultrasonic scanning systems. The high cost of inspection is driven by the need for scanning systems which can follow large curve surfaces. Additionally, either large water tanks or water squirters are required to couple the ultrasonics into the part. Thermographic techniques offer significant advantages over conventional ultrasonics by not requiring physical coupling between the part and sensor. The thermographic system can easily inspect large curved surface without requiring a surface following scanner. However, implementation of Thermal Nondestructive Evaluations (TNDE) for flaw detection in composite materials and structures requires determining its limit. Advanced algorithms have been developed to enable locating and sizing defects in carbon fiber reinforced plastic (CFRP). Thermal Tomography is a very promising method for visualizing the size and location of defects in materials such as CFRP. However, further investigations are required to determine its capabilities for inspection of thick composites. In present work we have studied influence of the anisotropy on the reconstructed image of a defect generated by an inversion technique. The composite material is considered as homogeneous with macro properties: thermal conductivity K, specific heat c, and density rho. The simulation process involves two sequential steps: solving the three dimensional transient heat diffusion equation for a sample with a defect, then estimating the defect location and size from the surface spatial and temporal thermal distributions (inverse problem), calculated from the simulations.

Plotnikov, Y. A.↗

Lightweight Ablative and Ceramic Thermal Protection System Materials for NASA Exploration Systems Vehicles

As a collaborative effort among NASA Centers, the "Lightweight Nonmetallic Thermal Protection Materials Technology" Project was set up to assist mission/vehicle design trade studies, to support risk reduction in thermal protection system (TPS) material selections, to facilitate vehicle mass optimization, and to aid development of human-rated TPS qualification and certification plans. Missions performing aerocapture, aerobraking, or direct aeroentry rely on advanced heatshields that allow reductions in spacecraft mass by minimizing propellant requirements. Information will be presented on candidate materials for such reentry approaches and on screening tests conducted (material property and space environmental effects tests) to evaluate viable candidates. Seventeen materials, in three classes (ablatives, tiles, and ceramic matrix composites), were studied. In additional to physical, mechanical, and thermal property tests, high heat flux laser tests and simulated-reentry oxidation tests were performed. Space environmental effects testing, which included exposures to electrons, atomic oxygen, and hypervelocity impacts, was also conducted.

Valentine, Peter G.↗