Search NASA⌕ Search

SEARCH · Search NASA

Results for “Coordinate transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

High-Temperature Decomposition of Brønsted Acid Sites in Gallium-Substituted Zeolites

The dehydroxylation of Broensted acid sites (BAS) in Ga-substituted zeolites was investigated at temperatures up to 850 C using X-ray absorption spectroscopy (XAS), Fourier transform infrared spectroscopy (FTIR), and mass spectrometry-temperature programmed desorption (MS-TPD). X-ray absorption near-edge spectroscopy (XANES) revealed that the majority of gallium has tetrahedral coordination even after complete dehydroxylation. The interatomic gallium-oxygen distance and gallium coordination number determined by extended X-ray absorption fine structure (EXAFS) are consistent with gallium in tetrahedral coordination at low T (< 550 C). Upon heating Ga-Beta and Ga-ZSM5 to 850 C, analysis of the EXAFS showed that 70 and 80% of the gallium was still in tetrahedral coordination. The remainder of the gallium was found to be in octahedral coordination. No trigonal Ga atoms were observed. FTIR measurements carried out at similar temperatures show that the intensity of the OH vibration due to BAS has been eliminated. MS-TPD revealed that hydrogen in addition to water evolved from the samples during dehydroxylation. This shows that dehydrogenation in addition to dehydration is a mechanism that contributes to BAS decomposition. Dehydrogenation was further confirmed by exposing the sample to hydrogen to regenerate some of the BAS as monitored by FTIR and MS-TPD.

08 HYDROGEN↗

Detection of Rossby Waves in Multi-Parameters in Multi-Mission Satellite Observations and HYCOM Simulations in the Indian Ocean

Rossby waves are difficult to detect with in situ methods. However, as we show in this paper, they can be clearly identified in multi-parameters in multi-mission satellite observations of sea surface height (SSH), sea surface temperature (SST) and ocean color observations of chlorophyll-a (chl-a), as well as 1/12-deg global HYbrid Coordinate Ocean Model (HYCOM) simulations of SSH, SST and sea surface salinity (SSS) in the Indian Ocean. While the surface structure of Rossby waves can be elucidated from comparisons of the signal in different sea surface parameters, models are needed to gain direct information about how these waves affect the ocean at depth. The first three baroclinic modes of the Rossby waves are inferred from the Fast Fourier Transform (FFT), and two-dimensional Radon Transform (2D RT). At many latitudes the first and second baroclinic mode Rossby wave phase speeds from satellite observations and model parameters are identified.

SSH (SEA SURFACE HEIGHT)↗

Photosensitivity of the Ni-A state of [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki F with visible light

Highlights: Black-Right-Pointing-Pointer Ni-A state of [NiFe] hydrogenase showed light sensitivity. Black-Right-Pointing-Pointer New FT-IR bands were observed with light irradiation of the Ni-A state. Black-Right-Pointing-Pointer EPR g-values of the Ni-A state shifted upon light irradiation. Black-Right-Pointing-Pointer The light-induced state converted back to the Ni-A state under the dark condition. -- Abstract: [NiFe] hydrogenase catalyzes reversible oxidation of molecular hydrogen. Its active site is constructed of a hetero dinuclear Ni-Fe complex, and the oxidation state of the Ni ion changes according to the redox state of the enzyme. We found that the Ni-A state (an inactive unready, oxidized state) of [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki F (DvMF) is light sensitive and forms a new state (Ni-AL) with irradiation of visible light. The Fourier transform infrared (FT-IR) bands at 1956, 2084 and 2094 cm{sup -1} of the Ni-A state shifted to 1971, 2086 and 2098 cm{sup -1} in the Ni-AL state. The g-values of g{sub x} = 2.30, g{sub y} = 2.23 and g{sub z} = 2.01 for the signals in the electron paramagnetic resonance (EPR) spectrum of the Ni-A state at room temperature varied for -0.009, +0.012 and +0.010, respectively, upon light irradiation. The light-induced Ni-AL state converted back immediately to the Ni-A state under dark condition at room temperature. These results show that the coordination structure of the Fe site of the Ni-A state of [NiFe] hydrogenase is perturbed significantly by light irradiation with relatively small coordination change at the Ni site.

60 APPLIED LIFE SCIENCES↗

Binary spinning black hole Hamiltonian in canonical center-of-mass and rest-frame coordinates through higher post-Newtonian order

The recently constructed Hamiltonians for spinless binary black holes through third post-Newtonian order and for spinning ones through formal second post-Newtonian order, where the spins are counted of zero post-Newtonian order, are transformed into fully canonical center-of-mass and rest-frame variables. The mixture terms in the Hamiltonians between center-of-mass and rest-frame variables are in accordance with the relation between the total linear momentum and the center-of-mass velocity as demanded by global Lorentz invariance. The various generating functions for the center-of-mass and rest-frame canonical variables are explicitly given in terms of the single-particle canonical variables. The no-interaction theorem does not apply because the world-line condition of Lorentz covariant position variables is not imposed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Conjugate flow action functionals

We present a new general framework to construct an action functional for a non-potential field theory. The key idea relies on representing the governing equations relative to a diffeomorphic flow of curvilinear coordinates which is assumed to be functionally dependent on the solution field. Such flow, which will be called the conjugate flow, evolves in space and time similarly to a physical fluid flow of classical mechanics and it can be selected in order to symmetrize the Gâteaux derivative of the field equations with respect to suitable local bilinear forms. This is equivalent to requiring that the governing equations of the field theory can be derived from a principle of stationary action on a Lie group manifold. By using a general operator framework, we obtain the determining equations of such manifold and the corresponding conjugate flow action functional. In particular, we study scalar and vector field theories governed by second-order nonlinear partial differential equations. The identification of transformation groups leaving the conjugate flow action functional invariant could lead to the discovery of new conservation laws in fluid dynamics and other disciplines.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Diversity of Functionalized Germanium Zintl Clusters: Syntheses and Theoretical Studies of [Ge9PdPPh3]3- and [Ni@(Ge9PdPPh3)]2-

A new Zintl cluster [Ge9PdPPh3]3- has been isolated as (2,2,2-crypt)K+ salt through the reaction of K4Ge9 and Pd[PPh3]4 in ethylenediamine solutions and characterized via single-crystal X-ray crystallography. The as-prepared bimetallic [Ge9PdPPh3]3- cluster could successfully trap a nickel atom to form a trimetallic cluster [Ni@(Ge9PdPPh3)]2-. The coordination of Ge94- by PdPPh3 induces a one-electron oxidation and encapsulation of the Ni atom into the Ge93- cage leads to a further one-electron oxidation and a geometry transformation from C4v (nido) to C3v (closo).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combining model-based and model-free methods for stochastic control of distributed energy resources

Modern distribution systems are experiencing a fast transformation with the growing penetration of distributed energy resources (DERs). Along with the economic and environmental benefits of DERs, challenges arise to address the uncertainties caused by their inherent volatility. If properly coordinated, however, DERs have the potential to provide the controllability that grid operators need. Here, we propose a hierarchical control framework that combines the model-based and model-free methods for stochastic DER control in distribution systems. The upper-level scheduler considers a chance-constrained optimal power flow problem (model-based) that schedules DER setpoints to minimize the operational cost and maintain the operating reserve. The lower-level distributed DER controllers absorb real-time disturbances and uncertainties using the extremum seeking control (model-free) to achieve grid objectives. The combination of model-based and model-free methods allows us to take the advantages of both methods to effectively manage the uncertainty in distribution systems. The proposed work is demonstrated on the IEEE 13-node feeder.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Effect of Ligand Structural Isomerism in Formation of Calcium Coordination Networks

Using different structural isomers (2,5-; 2,4-; 2;6-; 3,4-; 3,5-) of pyridinedicarboxylic acid, nine calcium-based coordination networks were synthesized under hydro-/solvothermal conditions and/or were produced via solvent recrystallization of previously synthesized compounds. The coordination networks reported were characterized using single crystal X-ray diffraction and thermal methods. They show diverse structural topologies, depending on the ligand geometry and coordinated solvent molecules, with inorganic connectivity motifs ranging from isolated octahedra to infinite chains, layer and a three-dimensional dense framework. The as-synthesized and desolvated networks further show structural transformation to hydrated phases through dissolution/reformation pathways. The process is likely driven by the high hydration energy of the calcium metal center.

36 MATERIALS SCIENCE↗

Molecular structure of vapor-deposited amorphous selenium

The structure of amorphous selenium is clouded with much uncertainty and contradictory results regarding the dominance of polymeric chains versus monomer rings. The analysis of the diffraction radial distribution functions are inconclusive because of the similarities between the crystalline allotropes of selenium in terms of the coordination number, bond length, bond angle, and dihedral angle. Here, we took a much different approach and probed the molecular symmetry of the thermodynamically unstable amorphous state via analysis of structural phase transformations. We verified the structure of the converted metastable and stable crystalline structures using scanning transmission electron microscopy. In addition, given that no experimental technique can tell us the exact three-dimensional atomic arrangements in glassy semiconductors, we performed molecular-dynamic simulations using a well-established empirical three-body interatomic potential. In this work, we developed a true vapor-deposited process for the deposition of selenium molecules onto a substrate using empirical molecular vapor compositions and densities. We prepared both vapor-deposited and melt-quenched samples and showed that the simulated radial distribution functions match very well to experiment. The combination of our experimental and molecular-dynamic analyses shows that the structures of vapor- and melt-quenched glassy/amorphous selenium are quite different, based primarily on rings and chains, respectively, reflecting the predominant structure of the parent phase in its thermodynamic equilibrium.

36 MATERIALS SCIENCE↗

Role of local order in the small-scale plasticity of model amorphous materials

The mechanism of plastic flow in amorphous solids involves nucleation-controlled shear transformations, triggered under stress from fertile sites. However, the origin of these sites is still a matter of debate. In this paper, we show that the connection between local plastic activity and coordination defects in amorphous systems depends on the nature of the interatomic interactions. In particular, the directionality of the bonds, as quantified by the three-body term in Stillinger-Weber-like interactions, affects not only the role of local defects, but also the size of the plastic rearrangements, and the global stress-strain behavior. We study the effect of structure changes due to different quenching rates as well. We conclude the paper by a comparison between amorphous plasticity and the Peierls-Nabarro theory of plasticity in crystals.

36 MATERIALS SCIENCE↗

A Simple, Scalable Large Deformation Solid Mechanics Implementation in the MOOSE Framework

This article describes a large deformation solid mechanics solver implemented as part of the freely available and open source MOOSE finite element simulation framework. The article documents the choices made in developing the solid mechanics framework and describes novel formulations for the gradient operator and constitutive modeling framework made to simplify implementations of different coordinate systems, stabilized gradient operators, and different constitutive model inputs and outputs. In the process, the article describes a new formulation that casts objective integration of the Cauchy stress as a linear transformation of the small stress rate. Finally, the article presents key implementation details and examines the parallel efficiency of the solid mechanics solver implemented in MOOSE. The implementation retains a good weak scaling efficiency beyond 1,000 parallel processes. The article includes a discussion of the factors limiting the parallel efficiency of implicit, large deformation solid mechanics codes on current high-performance computers, with the main current limitation being the scalability of the algebraic multigrid methods used to solve the linearized equilibrium equations.

Applied computing → Computer-aided design↗

A method for the measurement and the statistical analysis of atmospheric turbulence

The instantaneous values of output voltages representing the wind velocity vector and the temperature at different elevations of the 250-foot meteorological tower located at NASA Wallops Flight Center are provided with the three dimensional split-film TSI Model 1080 anemometer system. The output voltages are sampled at a rate of one every 5 milliseconds, digitized and stored on digital magnetic tapes for a time period of approximately 40 minutes, with the use of a specially designed data acqusition system. A new calibration procedure permits the conversion of the digital voltages to the respective values of the temperature and the velocity components in a Cartesian coordinate system connected with the TSI probe with considerable accuracy. Power, cross, coincidence and quadrature spectra of the wind components and the temperature are obtained with the use of the fast Fourier transform. The cosine taper data window and ensemble and frequency smoothing techniques are used to provide smooth estimates of the spectral functions.

Tieleman, H. W.↗

Asymptotic form of the longitudinal correlation function for isotropic homogeneous turbulence

An asymptotic form is derived for the longitudinal correlation function for isotropic homogeneous turbulence in an incompressible fluid governed by the Navier-Stokes equation. The result is obtained from an analysis of the algebraic-differential structure of the two-point correlation tensor contained in the complex-valued Fourier transform of the probability measure over the turbulence ensemble, which reveals that the Hopf characteristic functional (the complex-valued Fourier transform of the probability measure) satisfies the Fourier interference inequality. Consequences of the expression obtained, in which the correlation function is a positive definite function of the inverse cube of the spatial coordinate as it approaches infinity, are shown to include the nonexistence of the Loitsianskii invariant, and the solution is shown to be consistent with empirical formulas.

Rosen, G.↗

Building a 2.5D Digital Elevation Model from 2D Imagery

When projecting imagery into a georeferenced coordinate frame, one needs to have some model of the geographical region that is being projected to. This model can sometimes be a simple geometrical curve, such as an ellipse or even a plane. However, to obtain accurate projections, one needs to have a more sophisticated model that encodes the undulations in the terrain including things like mountains, valleys, and even manmade structures. The product that is often used for this purpose is a Digital Elevation Model (DEM). The technology presented here generates a high-quality DEM from a collection of 2D images taken from multiple viewpoints, plus pose data for each of the images and a camera model for the sensor. The technology assumes that the images are all of the same region of the environment. The pose data for each image is used as an initial estimate of the geometric relationship between the images, but the pose data is often noisy and not of sufficient quality to build a high-quality DEM. Therefore, the source imagery is passed through a feature-tracking algorithm and multi-plane-homography algorithm, which refine the geometric transforms between images. The images and their refined poses are then passed to a stereo algorithm, which generates dense 3D data for each image in the sequence. The 3D data from each image is then placed into a consistent coordinate frame and passed to a routine that divides the coordinate frame into a number of cells. The 3D points that fall into each cell are collected, and basic statistics are applied to determine the elevation of that cell. The result of this step is a DEM that is in an arbitrary coordinate frame. This DEM is then filtered and smoothed in order to remove small artifacts. The final step in the algorithm is to take the initial DEM and rotate and translate it to be in the world coordinate frame [such as UTM (Universal Transverse Mercator), MGRS (Military Grid Reference System), or geodetic] such that it can be saved in a standard DEM format and used for projection.

Padgett, Curtis W.↗

Dynamical invariants in systems with and without broken time-reversal symmetry

In the first part of the lectures dynamical invariants in classical mechanics and conventional quantum mechanics will be considered. In particular, we will begin with some remarks on classical mechanics and on quantization in order to establish the theory in the form that will be used later on. Starting from the time-dependent Schroedinger equation, the dynamics of Gaussian wave packets and Ermakov invariants, the time-dependent Green function/Feynman kernel, quantum-classical connections, energetics and Lagrange-Hamilton formalism for quantum uncertainties, momentum space representation and the relation between the Wigner function and the Ermakov invariant will be discussed. The representation of canonical transformations in time-independent and time-dependent quantum mechanics, factorization of the Ermakov invariant and generalized creation/annihilation operators will be studied. Subsequently, the time-independent Schroedinger equation, leading to nonlinear quantum mechanics related to Riccati/Ermakov systems as well as the occurrence of Riccati/Ermakov systems in the treatment of Bose-Einstein condensates via the so-called moment method will be analyzed.In part two, irreversible dynamics of dissipative systems, classical and quantum mechanical descriptions and corresponding invariants will be treated. After some general remarks on classical and quantum mechanics with unitary time-evolution and energy conservation, phenomenological Langevin and Fokker--Planck equations, master equations in classical and quantum mechanics and the system-plus-reservoir approach will be mentioned briefly. Then follows a more detailed discussion of modified Schroedinger equations and, particularly, of a nonlinear Schroedinger equation with complex logarithmic nonlinearity; its properties, solutions, invariants and energetics will be studied. Finally, a comparison with a classical description in expanding coordinates will lead to a non-unitary connection between the logarithmic nonlinear Schroedinger equation, the Caldirola-Kanai approach and the expanding coordinate approach.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Distortion of ethyne on coordination to silver acetylide, C{sub 2}H{sub 2}⋅⋅⋅AgCCH, characterised by broadband rotational spectroscopy and ab initio calculations

The rotational spectra of six isotopologues of a complex of ethyne and silver acetylide, C{sub 2}H{sub 2}⋅⋅⋅AgCCH, are measured by both chirped-pulse and Fabry-Perot cavity versions of Fourier-transform microwave spectroscopy. The complex is generated through laser ablation of a silver target in the presence of a gas sample containing 1% C{sub 2}H{sub 2}, 1% SF{sub 6}, and 98% Ar undergoing supersonic expansion. Rotational, A{sub 0}, B{sub 0}, C{sub 0}, and centrifugal distortion Δ{sub J} and Δ{sub JK} constants are determined for all isotopologues of C{sub 2}H{sub 2}⋅⋅⋅AgCCH studied. The geometry is planar, C{sub 2v} and T-shaped in which the C{sub 2}H{sub 2} sub-unit comprises the bar of the “T” and binds to the metal atom through its π electrons. In the r{sub 0} geometry, the distance of the Ag atom from the centre of the triple bond in C{sub 2}H{sub 2} is 2.2104(10) Å. The r(HC≡CH) parameter representing the bond distance separating the two carbon atoms and the angle, ∠(CCH), each defined within the C{sub 2}H{sub 2} sub-unit, are determined to be 1.2200(24) Å and 186.0(5)°, respectively. This distortion of the linear geometry of C{sub 2}H{sub 2} involves the hydrogen atoms moving away from the silver atom within the complex. The results thus reveal that the geometry of C{sub 2}H{sub 2} changes measurably on coordination to AgCCH. A value of 59(4) N m{sup −1} is determined for the intermolecular force constant, k{sub σ}, confirming that the complex is significantly more strongly bound than hydrogen and halogen-bonded analogues. Ab initio calculations of the r{sub e} geometry at the CCSD(T)(F12{sup *})/ACVTZ level of theory are consistent with the experimental results. The spectra of the {sup 107}Ag{sup 13}C{sup 13}CH and {sup 109}Ag{sup 13}C{sup 13}CH isotopologues of free silver acetylide are also measured for the first time allowing the geometry of the AgCCH monomer to be examined in greater detail than previously.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Towards modeling gadolinium-lead-borate glasses

Infrared spectra of gadolinium-lead-borate glasses of the xGd{sub 2}O{sub 3}.(100 - x)[3B{sub 2}O{sub 3}.PbO] system, where x = 0, 5, 10, 15, 25, 35 and 50 mol.%, have been recorded to explore the role of content of gadolinium ions behaving as glass modifier. The FTIR spectroscopy data for the xGd{sub 2}O{sub 3}.(1 - x)[3B{sub 2}O{sub 3}.PbO] glasses show the structural role of lead ions as a network-formers and of the gadolinium ions network modifiers. Adding of the rare earth ion up to 35 mol.% into the glass matrix, the IR bands characteristic to the studied glasses become sharper and more pronounced. Structural changes, as recognized by analyzing band shapes of IR spectra, revealed that Gd{sub 2}O{sub 3} causes a change from the continuous borate network to the continuous lead-borate network interconnected through Pb-O-B and B-O-B bridges and the transformation of some tetrahedral [BO{sub 4}] units into trigonal [BO{sub 3}] units. Then, gadolinium ions have affinity towards [BO{sub 3}] structural units which contain non-bridging oxygens necessary for the charge compensation because the more electronegative [BO{sub 3}] structural units were implied in the formation of B-O-Gd bonds and the transformation of glass network into a glass ceramic. We propose a possible structural model of building blocks for the formation of continuous random 3B{sub 2}O{sub 3}.PbO network glass used by density functional theory (DFT) calculations. DFT calculations show that lead atoms occupy three different sites in the proposed model. The first is coordinated with six oxygen atoms forming distorted octahedral geometries. The second lead atom has an octahedral oxygen environment and the five longer Pb-O bonds are considered as participating in the metal coordination scheme. The third lead atom has ionic character. In agreement with the results offered by the experimental FTIR data, the theoretical IR data confirm that our proposed structure is highly possible.

36 MATERIALS SCIENCE↗