Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data Digitization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Calculation of power spectrums from digital time series with missing data points

Two algorithms are developed for calculating power spectrums from the autocorrelation function when there are missing data points in the time series. Both methods use an average sampling interval to compute lagged products. One method, the correlation function power spectrum, takes the discrete Fourier transform of the lagged products directly to obtain the spectrum, while the other, the modified Blackman-Tukey power spectrum, takes the Fourier transform of the mean lagged products. Both techniques require fewer calculations than other procedures since only 50% to 80% of the maximum lags need be calculated. The algorithms are compared with the Fourier transform power spectrum and two least squares procedures (all for an arbitrary data spacing). Examples are given showing recovery of frequency components from simulated periodic data where portions of the time series are missing and random noise has been added to both the time points and to values of the function. In addition the methods are compared using real data. All procedures performed equally well in detecting periodicities in the data.

Murray, C. W., Jr.↗
NASA NTRS1980

A clear-sky spectral solar radiation model for snow-covered mountainous terrain

A clear-sky spectral solar radiation model for direct and diffuse fluxes, combined with topographic calculations from digital terrain data, computes either incident, net, or reflected solar radiation at any point on a snow surface in mountainous terrain. The radiation may be integrated over any wavelength range from 250 to 5000 nm, or over any time step. Atmospheric attenuation parameters are ozone, water vapor, the Angstrom turbidity coefficient and exponent, and the absorptance to reflectance ratio of the atmospheric aerosols. The model derives these, from measurements which may contain both systematic and random errors, by finding the least squares solution to an overdetermined set of nonlinear equations. For calculations over a specified area, it employs table look-up procedures, so that computation speed for the spectral model approaches that for a lumped model. Thus it may be useful as part of a snow surface energy budget calculation over a drainage basin.

Dozier, J.↗
NASA NTRS1981

Forming electrical interconnections through semiconductor wafers

An information processing system based on CMOS/SOS technology is being developed by NASA to process digital image data collected by satellites. An array of holes is laser drilled in a semiconductor wafer, and a conductor is formed in the holes to fabricate electrical interconnections through the wafers. Six techniques are used to form conductors in the silicon-on-sapphire (SOS) wafers, including capillary wetting, wedge extrusion, wire intersection, electroless plating, electroforming, double-sided sputtering and through-hole electroplating. The respective strengths and weaknesses of these techniques are discussed and compared, with double-sided sputtering and the through-hole plating method achieving best results. In addition, hollow conductors provided by the technique are available for solder refill, providing a natural way of forming an electrically connected stack of SOS wafers.

Anthony, T. R.↗
NASA NTRS1981

Digital ultrasonics signal processing: Flaw data post processing use and description

A modular system composed of two sets of tasks which interprets the flaw data and allows compensation of the data due to transducer characteristics is described. The hardware configuration consists of two main units. A DEC LSI-11 processor running under the RT-11 sngle job, version 2C-02 operating system, controls the scanner hardware and the ultrasonic unit. A DEC PDP-11/45 processor also running under the RT-11, version 2C-02, operating system, stores, processes and displays the flaw data. The software developed the Ultrasonics Evaluation System, is divided into two catagories; transducer characterization and flaw classification. Each category is divided further into two functional tasks: a data acquisition and a postprocessor ask. The flaw characterization collects data, compresses its, and writes it to a disk file. The data is then processed by the flaw classification postprocessing task. The use and operation of a flaw data postprocessor is described.

Buel, V. E.↗
NASA NTRS1981

Discrimination of unique biological communities in the Mississippi lignite belt

Small scale hardcopy LANDSAT prints were manually interpreted and color infrared aerial photography was obtained in an effort to identify and map large contiguous areas of old growth hardwood stands within Mississippi's lignite belt which do not exhibit signs of recent disturbance by agriculture, grazing, timber harvesting, fire, or any natural catastrophe, and which may, therefore, contain unique or historical ecological habitat types. An information system using land cover classes derived from digital LANDSAT data and containing information on geology, hydrology, soils, and cultural activities was developed. Using computer-assisted land cover classifications, all hardwood remnants in the study area which are subject to possible disturbance from surface mining were determined. Twelve rare plants were also identified by botanists.

Miller, W. F.↗
NASA NTRS1982

Topographic slope correction for analysis of thermal infrared images

A simple topographic slope correction using a linearized thermal model and assuming slopes less than about 20 degrees is presented. The correction can be used to analyzed individual thermal images or composite products such as temperature difference or thermal inertia. Simple curves are provided for latitudes of 30 and 50 degrees. The form is easily adapted for analysis of HCMM images using the DMA digital terrain data.

Watson, K.↗
NASA NTRS1981

Satellite-observed cloud-top height changes in tornadic thunderstorms

Eleven tornadic storms are evaluated with respect to cloud top temperature changes relative to tornado touchdown. Digital IR data from the SMS/GOES geosynchronous satellites were employed for 10 F2 and one F1 tornadoes. A rapid ascent of the cloud tops 30-45 min before tornado touchdown, a temperature decrease of 0.4 K/min, and an ascent rate of about 3 m/sec were observed. The presence of an operating Doppler radar for three of the sample storms allowed detection of a mesocyclone coincident with the rapid cloud top ascent. The intensification and descent of the vortex to form a tornado is concluded to be due to a weakening of the updraft, the formation of a downdraft, and a shift of the vortex to the updraft-downdraft boundary, leading to dominance of the tilting term in the generation of vorticity.

Adler, R. F.↗
NASA NTRS1982

Evaluation of methods for rapid determination of freezing point of aviation fuels

Methods for identification of the more promising concepts for the development of a portable instrument to rapidly determine the freezing point of aviation fuels are described. The evaluation process consisted of: (1) collection of information on techniques previously used for the determination of the freezing point, (2) screening and selection of these techniques for further evaluation of their suitability in a portable unit for rapid measurement, and (3) an extensive experimental evaluation of the selected techniques and a final selection of the most promising technique. Test apparatuses employing differential thermal analysis and the change in optical transparency during phase change were evaluated and tested. A technique similar to differential thermal analysis using no reference fuel was investigated. In this method, the freezing point was obtained by digitizing the data and locating the point of inflection. Results obtained using this technique compare well with those obtained elsewhere using different techniques. A conceptual design of a portable instrument incorporating this technique is presented.

Mathiprakasam, B.↗
NASA NTRS1982

LANDSAT land cover analysis completed for CIRSS/San Bernardino County project

The LANDSAT analysis carried out as part of Ames Research Center's San Bernardino County Project, one of four projects sponsored by NASA as part of the California Integrated Remote Sensing System (CIRSS) effort for generating and utilizing digital geographic data bases, is described. Topics explored include use of data-base modeling with spectral cluster data to improve LANDSAT data classification, and quantitative evaluation of several change techniques. Both 1976 and 1979 LANDSAT data were used in the project.

Likens, W.↗
NASA NTRS1982

Airborne multispectral linear array instruments at Goddard Space Flight Center

The fabrication of airborne instruments is contributing to the development of multispectral linear array technology at NASA's Goddard Space Flight Center. The linear array pushbroom radiometer (LAPR-I), was built to demonstrate capabilities for acquiring digital image data using linear arrays. The LAPR-I employed three arrays of 512 silicon photodiodes each to simultaneously acquire three channels of data for spectral bands within the visible and near-infrared portions of the spectrum. A second instrument, LAPR-II, uses four arrays each consisting of 512 silicon detectors. A filter wheel containing six spectral filters is used in conjunction with each array to allow filter changes in flight. This capability will facilitate studies into the utility of various bands within the visible and near infrared portions of the spectrum. The LAPR-II's aircraft mounting will allow off-nadir pointing (plus-or-minus 50 deg fore-and-aft and side-to-side) which will enable investigations of the radiometric and geometric effects of off-nadir viewing. A short wave infrared radiometer is also described.

Irons, J. R.↗
NASA NTRS1983

Literature relevant to remote sensing of water quality

References relevant to remote sensing of water quality were compiled, organized, and cross-referenced. The following general categories were included: (1) optical properties and measurement of water characteristics; (2) interpretation of water characteristics by remote sensing, including color, transparency, suspended or dissolved inorganic matter, biological materials, and temperature; (3) application of remote sensing for water quality monitoring; (4) application of remote sensing according to water body type; and (5) manipulation, processing and interpretation of remote sensing digital water data.

Middleton, E. M.↗
NASA NTRS1983

Seasat synthetic aperture radar /SAR/ response to lowland vegetation types in eastern Maryland and Virginia

Examination of Seasat SAR images of eastern Maryland and Virginia reveals botanical distinctions between vegetated lowland areas and adjacent upland areas. Radar returns from the lowland areas can be either brighter or darker than returns from the upland forests. Scattering models and scatterometer measurements predict an increase of 6 dB in backscatter from vegetation over standing water. This agrees with the 30-digital number (DN) increase observed in the digital Seasat data. The brightest areas in the Chickahominy, Virginia, drainage, containing P. virginica about 0.4 m high, contrast with the brightest areas in the Blackwater, Maryland, marshes, which contain mature loblolly pine in standing water. The darkest vegetated area in the Chickahominy drainage contains a forest of Nyssa aquatica (water tupelo) about 18 m high, while the darkest vegetated area in the Blackwater marshes contains the marsh plant Spartina alterniflora, 0.3 m high. The density, morphology, and relative geometry of the lowland vegetation with respect to standing water can all affect the strength of the return L band signal.

Krohn, M. D.↗
NASA NTRS1983

Case study of the March 24, 1976 Elton, Louisiana tornado using satellite infrared imagery, Doppler sounder, rawinsonde, and radar observations

The Elton, Louisiana tornado on March 24, 1976 has been studied using GOES digital infrared data for the growth and collapse of the cloud top, the temperature-height relationship and air mass instability from rawinsonde data, gravity waves from Doppler sounder records, and radar summaries from storm activity during the three-hour time period immediately preceding the touchdown of the tornado. In this case, the overshooting turret collapsed 30 minutes before the tornado touchdown as the eastward moving cloud reached Elton, Louisiana. Results show that the gravity waves were excited by the enhanced convection of the storm penetrating through the tropopause in the 2.5 hour time period before the tornado touched down.

Hung, R. J.↗
NASA NTRS1983

Global multispectral mosaics of the icy Galilean satellites

Multispectral mosaics of the three icy Galilean satellites have been produced from low- to moderate-resolution Voyager images. The digital image data have been calibrated using preflight and in-flight calibration data, and reduced to normal albedos for four-color band passes, centered at 0.35, 0.41, 0.48, and 0.59 microns. The individual images have been geometrically corrected, mosaiked, and presented in a normal cylindrical map projection at a uniform scale of 8 km/pixel. Preliminary analysis of the normal albedo data shows that (1) the darkest terrains on the satellites are the dark regions on Callisto, (2) the brightest regions are bright plains regions on Europa and bright, fresh craters on Ganymede, (3) bright craters on Ganymede and its dark, cratered regions are both significantly brighter than comparable terrains on Callisto, and (4) Europa exhibits several distinct spectral units, with regions on the trailing hemisphere having lower relative ultraviolet spectral reflectance than areas on the leading hemisphere. This is consistent with proposals that Io-related plasma impact on Europa's trailing side has altered its optical properties.

Johnson, T. V.↗
NASA NTRS1984

LANDSAT-D investigations in snow hydrology

Thematic mapper radiometric characteristics, snow/cloud reflectance, and atmospheric correction are discussed with application to determining the spectral albedo of snow. The geometric characterics of TM and digital elevation data are examined. The geometric transformations and resampling required to coregister these data are discussed.

Dozier, J.↗
NASA NTRS1984

Arc discharge convection studies: A Space Shuttle experiment

Three mercury vapor arc lamps were tested in the microgravity environment of one of NASA's small, self-contained payloads during STS-41B. A description of the payload structural design, photographic and optical systems, and electrical system is provided. Thermal control within the payload is discussed. Examination of digital film data indicates that the 175 watt arc lamp has a significant increase in light output when convection is removed in the gravity-free environment of space.

Bellows, A. H.↗
NASA NTRS1984

Geometric Accuracy Assessment of LANDSAT-4 Multispectral Scanner (MSS)

Standard LANDSAT-4 MSS digital image data were analyzed for geometric accuracy using two P-format (UTM projection) images of the Washington, D.C. area, scene day 109 (ID number 4010915140) and scene day 125 (ID number 4012515144). Both scenes were tested for geodetic registration accuracy (scene-to-map), temporal registration accuracy (scene-to-scene), and band-to-band registration accuracy (within a scene). The combined RMS error for geodetic registration accuracy was 0.43 pixel (25.51 meters), well within specifications. The comparison between the 2 scenes was made on a band-by-band basis. The 90 percent error figure for temporal registration was 0.68 (57x57) pixel (38.8 meters). Although this figure is larger than the specification, it can be considered excellent with respect to user application. The best case registration errors between bands 1 and 2, and 3 and 4 were 14.2m and 13.7m, respectively, both within specifications. The worst case registration error was 38.0 m between bands 2 and 3.

Imhoff, M. L.↗
NASA NTRS1984

Geology

Three objectives were outlined: (1) global distribution, geometry and composition of continental rock units; (2) morphology and structure of the continental crust; and (3) monitoring selected surface processes. Mapping soil, sediment and rock characteristics for land surfaces requires the use of visible, reflected, thermal and radio parts of the spectrum. Digital topographic data (elevation, slope angle, slope magnitude) are needed to correct reflectance, emission, and radar data. In addition, images of the topographic data provide fundamental information on the morphology and structure of the land.

Arvidson, R.↗