Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffractive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

A comparative study of diffraction of shallow-water waves by high-level IGN and GN equations

This work is on the nonlinear diffraction analysis of shallow-water waves, impinging on submerged obstacles, by two related theories, namely the classical Green–Naghdi (GN) equations and the Irrotational Green–Naghdi (IGN) equations, both sets of equations being at high levels and derived for incompressible and inviscid flows. Recently, the high-level Green–Naghdi equations have been applied to some wave transformation problems. The high-level IGN equations have also been used in the last decade to study certain wave propagation problems. However, past works on these theories used different numerical methods to solve these nonlinear and unsteady sets of differential equations and at different levels. Moreover, different physical problems have been solved in the past. Therefore, it has not been possible to understand the differences produced by these two sets of theories and their range of applicability so far. We are thus motivated to make a direct comparison of the results produced by these theories by use of the same numerical method to solve physically the same wave diffraction problems. We focus on comparing these two theories by using similar codes; only the equations used are different but other parts of the codes, such as the wave-maker, damping zone, discretion method, matrix solver, etc., are exactly the same. This way, we eliminate many potential sources of differences that could be produced by the solution of different equations. The physical problems include the presence of various submerged obstacles that can be used for example as breakwaters or to represent the continental shelf. A numerical wave tank is created by placing a wavemaker on one end and a wave absorbing beach on the other. The nonlinear and unsteady sets of differential equations are solved by the finite-difference method. The results are compared with different equations as well as with the available experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Void coalescence and ductile failure in IN718 investigated via high-energy synchrotron X-ray tomography and diffraction

Ductile failure through the growth and coalescence of voids is of particular relevance for many engineering materials. Yet, the lack of experimental measurements of the mechanical state of the material at an appropriate length scale has limited further understanding of the regime of ductile failure. In this study, local grain-scale experimental measurements are used to determine their relevance for describing and predicting ductile failure. Additive manufactured materials, due to the presence of inherent porosity, as well as the ability to tailor internal porosity, provides a promising avenue to study ductile failure. Selective laser melting is used to manufacture a specially designed specimen with two large, internal voids, in addition to the natural porosity, which is characteristic to the production process. The initial porosity and its evolution upon tensile loading are characterized via micro tomography. Several locations of void coalescence are captured in the sample, revealing activity of multiple modes of failure. Finite element simulations, with a simplified J2 plasticity model, instantiated with the initial void structure, is deployed, in which geometric localizations of stress concentration corresponded with experimentally observed sites of coalescence but was inadequate in capturing the appropriate failure mechanism. Furthermore, from the experimental results of the far-field high-energy diffraction microscopy, the heterogeneous micromechanical state is identified and tracked around voids due to the local grain interactions. These experiments determine narrow bands of low stress triaxiality, at the onset of failure, which highlight the path of coalescence through intervoid shearing. Diffraction spot spreading analysis aided characterization of intragranular plasticity and strain heterogeneity, which can be coupled with high triaxiality to form the conditions inducive for coalescence through intervoid necking. In this study, the experimentally determined grain-scale description of the micromechanical state provides a physical basis that can accurately capture both the sites and the mechanism of void coalescence at the onset of ductile failure.

36 MATERIALS SCIENCE↗

Structural analysis of WO 3 -TeO 2 glasses by neutron, high energy X-ray diffraction, reverse Monte Carlo simulations and XANES

The structure of WO 3 -TeO 2 glasses containing 15, 20 and 25 mol% WO 3 are studied by neutron diffraction (ND), high energy X-ray diffraction (XRD) and X-ray Absorption Near Edge spectroscopy (XANES). The short-range structural properties of glasses i.e. Te-O and W-O speciation, coordination number distributions, bond-lengths, and the O-Te-O, O-W-O and O-O-O bond angle distributions in the glass network are determined by the Reverse Monte Carlo (RMC) simulations of the ND and XRD data. RMC technique successfully determined all partial pair correlation functions and the coordination number distributions revealed that glass network consists predominantly of TeO 4 and WO 4 units with small amounts of triangular, penta and hexa co-ordinated units. The average W-O and Te-O bond lengths are in the ranges: 1.69-1.75 +/- 0.01 angstrom and 1.99-2.00 +/- 0.01 angstrom respectively. Both W-O and Te-O correlation peaks are asymmetrical, that indicate a distribution of their bond lengths in the respective structural units. The O-Te-O bond angle distribution has a peak at 107 +/- 2 degrees. Similarly the O-W-O bond angle distribution has a peak at 108 +/- 5 degrees. On increasing the WO3 concentration from 15 to 25 mol%, the average Te-O coordination number decreases from 3.80 to 3.61 +/- 0.02 due to the structural transformation: TeO 4 → TeO 3 , similarly the W-O coordination also decreases and is in the range: 3.79-3.67 +/- 0.02. XANES studies found that the oxidation state of Te and W ions in the glasses are 4 + and 6 + respectively.

36 MATERIALS SCIENCE↗

α-Phase transformation kinetics of U – 8 wt% Mo established by in situ neutron diffraction

The α-phase transformation kinetics of as-cast U - 8 wt% Mo below the eutectoid temperature have been established by in situ neutron diffraction. α-phase weight fraction data acquired through Rietveld refinement at five different isothermal hold temperatures can be modeled accurately utilizing a simple Johnson-Mehl-Avrami-Kolmogorov impingement-based theory, and the results are validated by a corresponding evolution in the γ-phase lattice parameter during transformation that follows Vegard’s law. Neutron diffraction data is used to produce a detailed Time-Temperature-Transformation diagram that improves upon inconsistencies in the current literature, exhibiting a minimum transformation start time of 40 min at temperatures between 500 °C and 510 °C. Lastly, the transformation kinetics of U – 8 wt% Mo can vary significantly from as-cast conditions after extensive heat treatments, due to homogenization of the typical dendritic microstructure which possesses non-negligible solute segregation.

36 MATERIALS SCIENCE↗

In-situ neutron diffraction characterization of temperature dependence deformation in α-uranium

In-situ strain neutron diffraction measurements were conducted at temperature on specimens coming from a clock-rolled α-uranium plate, and Elasto-Plastic Self-Consistent (EPSC) modeling was employed to interpret the findings. The modeling revealed that the active slip systems exhibit a thermally activated response, while deformation twinning remains athermal over the temperature ranges explored (25-150 °C). The modeling also allowed assessment of the effects of thermal residual stresses on the mechanical response during compression. These results are consistent with those from a prior study of room-temperature deformation, indicating that the thermal residual stresses strongly influence the internal strain evolution of grain families, as monitored with neutron diffraction, even though accounting for these residual stresses has little effect on the macroscopic flow curve, except in the elasto-plastic transition.

36 MATERIALS SCIENCE↗

Structural features of ISG borosilicate nuclear waste glasses revealed from high-energy X-ray diffraction and molecular dynamics simulations

Vitrification is a widely accepted method to immobilize nuclear waste. Detailed structural information is critical to understand the physical and chemical behaviors, including the long-term chemical durability of these glasses that are to be stored in geological storage sites. High-energy X-ray diffraction studies are used to obtain accurate structural information of the International Simple Glass (ISG), a six-component borosilicate model nuclear waste glass with a composition (mol%) of 60.2SiO 2 -16.0B 2 O 3 -12.6Na 2 O-3.8Al 2 O 3 -5.7CaO-1.7ZrO 2 . Classical molecular dynamics (MD) simulations with recently developed effective potentials are utilized to generate structural models of the ISG glasses to provide interpretation of the high-energy X-ray structural data and additional short and medium range structural details. The atomic structure model generated from MD simulations shows an excellent agreement with high-energy X-ray diffraction, measured for the first time for ISG, with an R x value of 5.5%. Systematic investigations of the medium-range structural features of ISG are performed, built upon recent study of the short-range structure. In particular, the glass former cation oxygen polyhedral analysis show that [SiO 4 ]-[SiO 4 ] and [BO 4 ]-[SiO 4 ] connections are the most abundant while [ZrO 6 ] octohedra having higher probability to connect to another [SiO 4 ], [BO 4 ] and [BO 3 ]. Moreover, we have studied the ISG surface structure using MD simulations. Noticeable differences in terms of both chemical compositions and structural features between the bulk and surface are observed. There exist increased small-sized rings, under coordinated Si species, high 3-coordinated boron content (86.5%) on the surface. Very importantly, sodium ions are found to be enriched on the glass surface, consistent with recent experimental results. Furthermore, both bulk and surface structural information are discussed in terms of the dissolution and corrosion mechanisms of ISG and related nuclear waste glasses.

36 MATERIALS SCIENCE↗

Microstructure Evolution of U–Zr System in A Thermal Cycling Neutron Diffraction Experiment: Extruded U–10Zr (wt. %)

Microstructure evolution of 1073 K extruded U–10Zr (wt. %) fuel during thermal cycling (303–1073 K with a ~9 hour hold at 873 K during cooling) was investigated using in situ neutron diffraction. Analysis was performed using Rietveld texture and crystal structure refinements from time–of–flight neutron diffraction data, with a focus on the evolution of textures and lattice parameters as a function of temperature. The α–U phase exhibits lattice contraction with increasing temperature along the b lattice direction and lattice expansion in the other directions while the other phases exhibit lattice expansion with temperature in all directions. Contrary to the established phase diagram, the β–U phase is absent at the temperatures of the thermal cycling. (001) α and (110) γ plane normals are observed with a strong preferred orientation along the extrusion direction. Finally, the variant selection of (001) α ||(110) γ is observed for the first time.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A density functional theory and neutron diffraction study of the ambient condition properties of sub-stoichiometric yttrium hydride

Several mechanical and thermophysical properties are required as a function of non-stoichiometry for the successful implementation of YH 2-x for nuclear reactor moderator applications. Density functional theory calculations, in combination with neutron diffraction experiments, were used to study the structural and mechanical properties of YH 2-x . Point defect analysis indicated H occupation primarily at the tetrahedral site within an fcc Y sub-lattice, confirming a fluorite YH 2 structure. The small positive formation energy for H vacancies under Y-rich conditions predicted that hypo-stoichiometry is accommodated by Y+YH 2 at ambient conditions and by H vacancies in the YH 2-x single phase that is relevant to high temperatures. Neutron diffraction studies were used to confirm both the occupation of H on tetrahedral sites and the near-stoichiometric composition of the hydride phase in the two-phase Y+YH 2 region of the phase diagram that dominates at room temperature. Energy minimized special-quasirandom-structures of H vacancies were used to calculate lattice parameters, elastic constants, and several other properties as a function of composition for the single phase YH 2-x . The lattice parameter of YH 2-x decreased by only 0.004 Å with increasing H/Y for the range 1.31 ≤ H / Y ≤ 2.0 indicating a negligible effect on lattice parameters due to vacancy formation. In the two-phase region, however, calculations predicted the density of z Y + ( 1 - z ) Y H 2 - x to increase with decreasing H/Y at lower temperatures due to the increased fraction of high-density Y metal. Additionally, for the high temperature single phase, decreasing H/Y reduced the density as a consequence of the lattice expansion associated with vacancy formation. All elastic constants and moduli increased with increasing hydrogen content in single-phase YH 2-x .

36 MATERIALS SCIENCE↗

Compression of silver in a diamond anvil cell: Pressure dependences of strength and grain size from X-ray diffraction data

Two silver samples, coarse grained (c-Ag, grain size 300{+-}30 nm) and nanocrystalline (n-Ag, grain size 55{+-}6 nm), are compressed in a diamond anvil cell in separate experiments. The pressure is increased in steps of {approx}3 GPa and the diffraction pattern recorded at each pressure. The grain size and compressive strength are determined from the analysis of the diffraction line-widths. The grain size of c-Ag decreases rapidly from 300{+-}30 nm at ambient pressure to 40{+-}8 nm at 15 GPa, and then gradually to 20{+-}3 nm at 40 GPa. After pressure release to ambient condition, the grain size is 25{+-}4 nm. The strength at ambient pressure is 0.18{+-}0.05 GPa and increases to 1.0{+-}0.3 GPa at 40 GPa. The grain size of n-Ag decreases from 55{+-}6 nm at ambient pressure to 17{+-}4 nm at 15 GPa and to 14{+-}3 nm at 55 GPa. After release of pressure to ambient condition, the grain size is 50{+-}7 nm. The strength increases from 0.51{+-}0.07 GPa at ambient pressure to 3.5{+-}0.4 GPa at 55 GPa. The strength is found to vary as the inverse of the square-root of the grain size. The results of the present measurements agree well with the grain-size dependence of strength derived from the hardness versus grain size data at ambient pressure available in the literature.

36 MATERIALS SCIENCE↗

Synchrotron X-ray diffraction of pyrolusite (MnO 2 ) and rutile (TiO 2 ) during heating to ~1000 °C

To compare thermal expansion behaviors in isomorphic structures with different redox behaviors, we separately heated pyrolusite (Mn 4+ O 2 ) and rutile (Ti 4+ O 2 ) powders from 25 to ~1000 °C at a rate of 0.05 °C/s at ambient pressure and analyzed them using synchrotron X-ray diffraction and Rietveld refinement. The pyrolusite exhibited two reduction-induced phase decompositions. Between 531 and 583 °C, pyrolusite decomposed to bixbyite (Mn 3+ 2 O 3 ), and between 972 and 998 °C, bixbyite decomposed to hausmannite (Mn 2+ Mn 3+ 2 O 4 ). The rutile experienced no phase decompositions or transitions over this same temperature interval. The refined bond lengths and angles for pyrolusite showed that the Mn 4+ coordination octahedron became more distorted near the phase decomposition to bixbyite due to the approach of two coordinating oxygen atoms. The 3d electrons of each Mn 4+ ion in pyrolusite make π bonds with the 2p electrons of the surrounding O 2- ions, whereas the Ti 4+ of rutile has no 3d electrons. Thus, π bonding between octahedral Mn 4+ and the surrounding O 2- anions increases the strength of the Mn–O bonds of pyrolusite relative to the Ti–O bonds of rutile. However, we observed a small decrease in O–O distances in pyrolusite before the decomposition, suggesting that at high temperature, increased π bonding between adjacent O anions precedes the release of O 2 and the reduction of Mn 4+ to Mn 3+ . Analogous behavior was observed for bixbyite before its reductive phase decomposition to hausmannite. In contrast, no anomalous changes in the O–O distances occurred for rutile. Our X-ray diffraction analyses provided accurate thermal expansion coefficients for these materials over a broader temperature range than reported in previous studies. The Mn–O bond lengths in pyrolusite were shorter and stronger than the Ti–O bonds of rutile; for example, at 60 °C, bond distances in pyrolusite refined to 1.8854(6) Å whereas the bond lengths of rutile were 1.9575(4) Å. Accordingly, the axial and volumetric thermal expansion coefficients refined for rutile were greater than those for pyrolusite. Further, the axial coefficients of thermal expansion (CTE) for pyrolusite were 96% (a-axis) and 69% (c-axis) of the corresponding values for rutile, and the volumetric CTE for pyrolusite was 85% of that for rutile.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Neutron diffraction study of the monoclinic to tetragonal structural transition in LaNbO{sub 4} and its relation to proton mobility

The fergusonite-scheelite structural transition of LaNbO{sub 4} was characterized by high-intensity variable temperature neutron powder diffraction in an effort to link structural changes to proton transport in the low temperature monoclinic and high temperature tetragonal polymorphs. The pronounced decrease in enthalpy of proton mobility with increasing temperature in monoclinic LaNbO{sub 4}, identified by Fjeld et al. , was found to coincide with the decrease in a key inter-tetrahedral oxygen separation. At temperatures above the transition, this oxygen to oxygen distance remains constant, behavior that is consistent with the invariant nature of the calculated enthalpy of mobility for the tetragonal phase. This oxygen separation is therefore proposed as the key structural parameter determining the success rate of proton transfer and ultimately the proton diffusion in LaNbO{sub 4}. Infrared measurements performed on acceptor-doped LaNbO{sub 4} show an absorption in the region 2500 to 3700 cm{sup -1} attributed to the O-H stretching motion influenced by hydrogen bonding. - Graphical Abstract: The structural phase transition from monoclinic fergusonite to tetragonal scheelite crystal structure clearly influences the proton conductivity of acceptor-doped LaNbO{sub 4} (see Figure). The present article attempts to explain why. Highlights: Black-Right-Pointing-Pointer Transition from monoclinic to tetragonal structure studied using neutron diffraction. Black-Right-Pointing-Pointer Change in proton mobility linked to contraction of a key oxygen separation. Black-Right-Pointing-Pointer Infra-red spectra reveal intermediate strength hydrogen bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-situ non-ambient X-ray diffraction studies of indium tungstate

In situ variable temperature and high pressure X-ray diffraction studies were carried out on indium tungstate (In{sub 2}W{sub 3}O{sub 12}). This material displays positive volume expansion in both its low temperature monoclinic and high temperature orthorhombic phases, with negative thermal expansion along the a axis and positive thermal expansion along the b and c axes. Upon hydrostatic compression in a diamond anvil cell, one crystalline to crystalline phase transition is observed in the range 1.9 to 2.7 GPa, and progressive irreversible amorphization occurs at pressures above 4.3 GPa. The crystalline high pressure phase appears to be isostructural to previously observed high pressure phases in other A{sub 2}M{sub 3}O{sub 12} compounds. - Graphical abstract: Variable pressure X-ray diffraction patterns of In{sub 2}W{sub 3}O{sub 12} collected in a diamond anvil cell. A phase transition is clearly observed between 2.2 and 2.7 GPa, followed by irreversible amorphization. Highlights: Black-Right-Pointing-Pointer The structure of In{sub 2}W{sub 3}O{sub 12} was studied as a function of temperature and pressure. Black-Right-Pointing-Pointer Uniaxial negative thermal expansion was observed above 250 Degree-Sign C. Black-Right-Pointing-Pointer A pressure-induced phase transition occurred between 2.2 and 2.7 GPa. Black-Right-Pointing-Pointer Pressure-induced irreversible amorphization was observed above 4.3 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Neutron diffraction study of monoclinic brannerite-type CoV{sub 2}O{sub 6}

A variable-temperature powder neutron diffraction study of the monoclinic brannerite-type CoV{sub 2}O{sub 6} (space group C2/m, a=9.2531(2), b=3.5040(1), c=6.6201(1) A and {beta}=111.617(1) Degree-Sign at 300 K) is reported. No structural transition is observed down to 4 K, but a magnetostriction accompanying antiferromagnetic order at T{sub N}=15 K is discovered. Antiferromagnetic order observed below T{sub N} has an a Multiplication-Sign b Multiplication-Sign 2c supercell in which Co{sup 2+} moments of magnitude 4.77(4) {mu}{sub B} at 4 K lie in the ac plane and are ferromagnetically coupled within chains of edge-sharing CoO{sub 6} octahedra parallel to b. Ferromagnetic chains are coupled antiferromagnetically to neighbouring chains in the a and c directions, and a model for the interchain order in the reported 1/3 magnetization plateau region is proposed. - Graphical abstract: Antiferromagnetic order of Co{sup 2+} moments in monoclinic brannerite type CoV2O6 results in a magnetostriction at the 15 K Neel transition. An alternative coupling between ferromagnetic chains is proposed to account for a 1/3 magnetization plateau in this material. Highlights: Black-Right-Pointing-Pointer Variable-temperature powder neutron diffraction study of the monoclinic brannerite-type CoV{sub 2}O{sub 6} is reported. Black-Right-Pointing-Pointer Magnetostriction accompanying antiferromagnetic order at T{sub N}=15 K in monoclinic CoV{sub 2}O{sub 6} is discovered. Black-Right-Pointing-Pointer Antiferromagnetic order in a Multiplication-Sign b Multiplication-Sign 2c supercell of CoV{sub 2}O{sub 6} is determined. Black-Right-Pointing-Pointer Model for spin order in the reported 1/3 magnetization plateau of CoV{sub 2}O{sub 6} is proposed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-situ X-ray diffraction study of phase transformations in the Am-O system

In the frame of minor actinides recycling, americium can be transmuted by adding it in UO{sub 2} or (U, Pu)O{sub 2} fuels. Americium oxides exhibiting a higher oxygen potential than U or Pu oxides, its addition alters the fuel properties. To comprehend its influence, a thorough knowledge of the Am-O phase equilibria diagram and of thermal expansion behavior is of main interest. Due to americium scarcity and high radiotoxicity, few experimental reports on this topic are available. Here we present in-situ high-temperature XRD results on the reduction from AmO{sub 2} to Am{sub 2}O{sub 3}. We show that fluorite (Fm-3m) AmO{sub 2} is reduced to cubic (Ia-3) C Prime -type Am{sub 2}O{sub 3+{delta}}, and then into hexagonal (P6{sub 3}/mmc) A-type Am{sub 2}O{sub 3}, which remains stable up to 1840 K. We also demonstrate the transitional existence of the monoclinic (C2/m) B-type Am{sub 2}O{sub 3}. At last, we describe, for the first time, the thermal expansion behavior of the hexagonal Am{sub 2}O{sub 3} between room temperature and 1840 K. - Graphical abstract: Americium dioxide was in situ studied by high-temperature X-ray diffraction. First, fluorite AmO{sub 2} is reduced to cubic C Prime -type Am{sub 2}O{sub 3+{delta}} and then transforms into hexagonal A-type Am{sub 2}O{sub 3}, which remains stable up to 1840 K. Then, we demonstrate the transitional existence of monoclinic B-type Am{sub 2}O{sub 3}. At last, we describe, for the first time, the thermal expansion of A-type Am{sub 2}O{sub 3} between room temperature and 1840 K. This work may contribute to a better understanding of Am oxide behavior. Highlights: Black-Right-Pointing-Pointer We realize an in-situ high-temperature X-ray diffraction study on an AmO{sub 2} sample. Black-Right-Pointing-Pointer Fluorite AmO{sub 2} transforms to cubic Am{sub 2}O{sub 3+{delta}} and then to hexagonal Am{sub 2}O{sub 3}. Black-Right-Pointing-Pointer Little-known monoclinic Am{sub 2}O{sub 3} is observed during the cubic-to-hexagonal transition. Black-Right-Pointing-Pointer Lattice parameter thermal expansion of hexagonal Am{sub 2}O{sub 3} is given up to 1840 K. Black-Right-Pointing-Pointer We give additional data on AmO{sub 2} lattice parameter expansion under self-irradiation.

36 MATERIALS SCIENCE↗

A high temperature neutron diffraction study of the double perovskite Ba{sub 2}{sup 154}SmMoO{sub 6}

Ba{sub 2}LnMoO{sub 6} double perovskites have been recently shown to display a wide range of interesting magnetic and structural properties; Ba{sub 2}{sup 154}SmMoO{sub 6} exhibits simultaneous antiferromagnetic order and a Jahn-Teller distortion. Here we report a high temperature neutron diffraction study of Ba{sub 2}{sup 154}SmMoO{sub 6} from 353 to 877 K. The results evidence a tetragonal to cubic phase transition at 423 K. Above this temperature the thermal displacement parameters of the oxygen atoms are modelled anisotropically as a result of a transverse vibration of the bridging oxygen. A smooth increase in the cell parameter a is observed with temperature for Ba{sub 2}{sup 154}SmMoO{sub 6}. - Graphical abstract: The high temperature crystal structure of Ba{sub 2}{sup 154}SmMoO{sub 6} evidencing a transverse oxygen vibration. Highlights: Black-Right-Pointing-Pointer A high temperature neutron diffraction study has been performed on an isotopically enriched sample of Ba{sub 2}{sup 154}SmMoO{sub 6}. Black-Right-Pointing-Pointer A cubic-tetragonal phase transition occurs below 423 K. Black-Right-Pointing-Pointer The thermal displacement parameters of the bridging oxygens are modelled anisotropically. Black-Right-Pointing-Pointer There is a transverse vibration of the bridging oxygen.

36 MATERIALS SCIENCE↗

Synchrotron X-ray diffraction study of the Ba{sub 1−x}SrSnO{sub 3} solid solution

At room temperature the sequence of phases with increasing amounts of strontium in the stannate perovskite system Ba{sub 1−x}SrSnO{sub 3} has been established from high resolution synchrotron X-ray powder diffraction. The observed sequence orthorhombic (Pbnm), orthorhombic (Ibmm), tetragonal (I4/mcm), and cubic (Pm3-bar m) is a consequence of the sequential introduction of cooperative tilting of the corner sharing SnO{sub 6} octahedra. The cell volume changes smoothly across the series with no obvious discontinuities associated with the phase transitions. - Graphical abstract: Portions of the synchrotron X-ray diffraction profiles (λ=0.82453 Å) from selected Ba{sub 1−x}Sr{sub x}SnO{sub 3} samples together with the results of fitting by the Rietveld method. Highlights: ► Structures of the stannate perovskites Ba{sub 1−x}SrSnO{sub 3} refined from synchrotron XRD. ► The sequence Pm3-bar m→I4/mcm→Ibmm→Pbnm results from tilting of the octahedra. ► The tilting maintains optimal bonding of the cations seen from the BVS analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A neutron diffraction study of structural distortion and magnetic ordering in the cation-ordered perovskites Ba{sub 2}Nd{sub 1−x}Y{sub x}MoO{sub 6}

The cation ordered perovskites Ba{sub 2}Nd{sub 1−x}Y{sub x}MoO{sub 6} (0.04≤x≤0.35) have been synthesised by solid-state techniques under reducing conditions at temperatures up to 1350 °C. Rietveld analyses of X-ray and neutron powder diffraction data show that these compounds adopt a tetragonally distorted perovskite structure. The tetragonal distortion is driven by the bonding requirements of the Ba{sup 2+} cation that occupies the central interstice of the perovskite; this cation would be underbonded if these compounds retained the cubic symmetry exhibited by the prototypical structure. The size and charge difference between the lanthanides and Mo{sup 5+} lead to complete ordering of the cations to give a rock-salt ordering of Nd{sup 3+}/Y{sup 3+}O{sub 6} and MoO{sub 6} octahedra. The I4/m space group symmetry is retained on cooling the x=0.1, 0.2 and 0.35 samples to low temperature ca. 2 K. Ba{sub 2}Nd{sub 0.90}Y{sub 0.10}MoO{sub 6} undergoes a gradual distortion of the MoO{sub 6} units on cooling from room temperature to give two long trans bonds (2.001(2) Å) along the z-direction and four shorter apical bonds (1.9563(13) Å) in the xy-plane. This distortion of the MoO{sub 6} units stabilises the 4d{sup 1} electron in the d{sub xz} and d{sub yz} orbitals whilst the d{sub xy} orbital is increased in energy due to the contraction of the Mo–O bonds in the xy-plane. This bond extension along z is propagated through the structure and gives a negative thermal expansion of −13×10{sup −6} K{sup −1} along c. The overall volumetric thermal expansion is positive due to conventional expansion along the other two crystallographic axes. With increasing Y{sup 3+} content this distortion is reduced in x=0.2 and eliminated in x=0.35 which contains largely regular MoO{sub 6} octahedra. The x=0.1 and x=0.2 show small peaks in the neutron diffraction profile due to long range antiferromagnetic order arising from ordered moments of ca. 2 μ{sub B}. - Graphical Abstract: The distortion in the molybdenum crystal field is continuously adjusted by chemical composition of the perovskite. Highlights: ► Introducing Y{sup 3+} into Ba{sub 2}NdMoO{sub 6} stabilises tetragonal symmetry to 2 K. ► A distortion of the ligand field around the Mo{sup 5+} 4d{sup 1} cation confers electronic stabilisation. ► The size of the distortion is progressively reduced with increasing Y{sup 3+} content. ► Distortion gives negative thermal expansion along z and antiferromagnetic order at T≤15 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Cu{sup 2+} and Ni{sup 2+} substitution at the Mn site in (La{sub 0.63}Ca{sub 0.37})MnO{sub 3}: A neutron powder diffraction investigation

The crystal and magnetic structures of the (La{sub 0.63}Ca{sub 0.37})(Mn{sub 1−x}TM{sub x})O{sub 3} compounds (x=0.00, 0.03, 0.08; TM=Cu{sup 2+}, Ni{sup 2+}) were investigated between 5 K and 300 K by means of dc magnetic measurements and neutron powder diffraction analysis followed by Rietveld refinement. Both substituting cations lead to a reduction of the long range ferromagnetic ordering temperature; ferromagnetism is strongly suppressed in the 8% Cu-substituted sample, where long- and short-range FM magnetic orders coexist together with short-range A-type AFM order. This particular feature can be related to the Jahn–Teller character of Cu{sup 2+}, absent in Ni{sup 2+}, and suggests the occurrence of a quantum critical point in the (La{sub 0.63}Ca{sub 0.37})(Mn{sub 1−x}Cu{sub x})O{sub 3} system. - Graphical abstract: Rietveld refinement plot of (La{sub 0.63}Ca{sub 0.37})(Mn{sub 0.92}Cu{sub 0.08})O{sub 3} showing in the inset the coexistence of broad A-type AFM peaks with FM ones. Highlights: ► (La{sub 0.63}Ca{sub 0.37})MnO{sub 3} was substituted with Ni and Cu. ► Neutron powder diffraction and Rietveld refinement were carried out. ► A quantum critical point possibly occurs in the (La{sub 0.63}Ca{sub 0.37})(Mn{sub 1−x}Cu{sub x})O{sub 3} system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗