Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fuel performance analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Conceptual design of minor actinides burner with an accelerator-driven subcritical system.

In the environmental impact study of the Yucca Mountain nuclear waste repository, the limit of spent nuclear fuel (SNF) for disposal is assessed at 70,000 metric tons of heavy metal (MTHM), among which 63,000 MTHM are the projected SNF discharge from U.S. commercial nuclear power plants though 2011. Within the 70,000 MTHM of SNF in storage, approximately 115 tons would be minor actinides (MAs) and 585 tons would be plutonium. This study describes the conceptual design of an accelerator-driven subcritical (ADS) system intended to utilize (burn) the 115 tons of MAs. The ADS system consists of a subcritical fission blanket where the MAs fuel will be burned, a spallation neutron source to drive the fission blanket, and a radiation shield to reduce the radiation dose to an acceptable level. The spallation neutrons are generated from the interaction of a 1 GeV proton beam with a lead-bismuth eutectic (LBE) or liquid lead target. In this concept, the fission blanket consists of a liquid mobile fuel and the fuel carrier can be LBE, liquid lead, or molten salt. The actinide fuel materials are dissolved, mixed, or suspended in the liquid fuel carrier. Therefore, fresh fuel can be fed into the fission blanket to adjust its reactivity and to control system power during operation. Monte Carlo analyses were performed to determine the overall parameters of an ADS system utilizing LBE as an example. Steady-state Monte Carlo simulations were studied for three fission blanket configurations that are similar except that the loaded amount of actinide fuel in the LBE is either 5, 7, or 10% of the total volume of the blanket, respectively. The neutron multiplication factor values of the three configurations are all approximately 0.98 and the MA initial inventories are each approximately 10 tons. Monte Carlo burnup simulations using the MCB5 code were performed to analyze the performance of the three conceptual ADS systems. Preliminary burnup analysis shows that all three conceptual ADS systems consume about 1.2 tons of actinides per year and produce 3 GW thermal power, with a proton beam power of 25 MW. Total MA fuel that would be consumed in the first 10 years of operation is 9.85, 11.80, or 12.68 tons, respectively, for the systems with 5, 7, or 10% actinide fuel particles loaded in the LBE. The corresponding annual MA fuel transmutation rate after reaching equilibrium at 10 years of operation is 0.83, 0.94, or 1.02 tons/year, respectively. Assuming that the ADS systems can be operated for 35 full-power years, the total MAs consumed in the three ADS systems are 30.6, 35.3, and 37.2 tons, respectively. For the three configurations, it is estimated that 3.8, 3.3, or 3.1 ADS system units are required to utilize the entire 115 tons of MA fuel in the SNF inventory, respectively.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Chabazite Zeolite Membranes for Krypton/Xenon Separation: Control of Membrane Properties and Process Modeling

Nuclear energy is considered to be a clean and economical means of carbon-free energy. As part of the overall process for recycling used nuclear fuel (UNF), it is necessary to develop technologies to separate the off-gases formed during the fission of uranium and plutonium in nuclear power reactors. The off-gas stream is generated during the shearing and chopping, voloxidation, and acid dissolution steps, and would have a flow rate of ∼2500 L/min assuming a typical 800 tons heavy metal/yr reprocessing facility. Kr separation from Xe is one of the steps in a proposed UNF off-gas processing flowsheet. The Kr/Xe mixture is approximately 10/90 by volume and hence the separation of Kr would reduce the volume of radioactive {sup 85}Kr waste by a factor of 10. Kr/Xe separation is challenging since they are both chemically inert species and physically very similar (0.036 nm size difference). There is no existing process for this separation that is suitable for use in UNF recycling since conventional cryogenic distillation requires highly intensive power and large system volume. Membrane-based separation using radiation-stable materials such as zeolites could be an attractive separation method, if membranes with sufficient Kr flux and selectivity can be fabricated. Zeolite membranes offer an opportunity to exploit the size difference of Kr (kinetic diameter 0.36 nm) and Xe (0.396 nm) to achieve preferential permeation of the minority component (Kr) from the mixture, leading to an efficient separation with very low energy requirements. An ideal membrane process would permeate a stream of pure Kr for storage and also produce pure Xe which has commercial value (> $8000/kg at 99+% purity). SAPO-34 is a silico-alumino-phosphate zeolite molecular sieve with CHA framework topology and containing uniform micropores (0.38 nm), intermediate in size between the kinetic diameters of Kr and Xe. It was hypothesized that SAPO-34 membranes can separate krypton and xenon by diffusivity differences. Previously we fabricated SAPO-34 membranes and showed that they are capable of separating Kr from Xe. Our previous work also indicated that there is much potential for engineering the separation properties of these membranes with a view to improving permeance and selectivity and evaluating the expected process performance. The main objectives of the present study are: 1) development of SAPO-34 membranes with enhanced membrane performance via thickness reduction and ion exchange, and 2) process modeling for technic-economic analysis of zeolite membrane systems for Kr/Xe separation.

36 MATERIALS SCIENCE↗

Novel Biological Conversion of Hydrogen and Carbon Dioxide Directly into Biodiesel

OPX Biotechnologies, Inc. (OPX), the National Renewable Energy Laboratory (NREL), and Johnson Matthey will develop and optimize a novel, engineered microorganism that directly produces biodiesel from renewable hydrogen (H 2 ) and carbon dioxide (CO 2 ). The proposed process will fix CO 2 utilizing H 2 to generate an infrastructure-compatible, energy-dense fuel at costs of less than $2.50 per gallon, with water being produced as the primary byproduct. NREL will perform metabolic engineering on the bacterium Cupriavidus necator (formerly Ralstonia eutropha) and a techno-economic analysis to guide future scale-up work. H 2 and CO 2 uptakes rates will be genetically increased, production of free fatty acids will be enhanced and their degradation pathway blocked in order to meet the ultimate program goals.

08 HYDROGEN↗

Editors’ Choice—Ionomer Side Chain Length and Equivalent Weight Impact on High Current Density Transport Resistances in PEMFC Cathodes

Cell voltage at high current densities (HCD) of an operating proton-exchange membrane fuel cell (PEMFC) suffers from losses due to the local-O 2 and bulk-H + transport resistances in the cathode catalyst layer (CCL). Particularly, the interaction of perfluorosulfonic acid (PFSA) ionomer with the carbon supported platinum catalyst plays a critical role in controlling reactant transport to the active site. In this study, we perform a systematic analysis of the side chain length and equivalent weight (EW) of PFSA ionomers on the CCL transport resistances. Ex situ measurements were carried out to quantify the ionomer characteristics such as the molecular weight, proton conductivity and water uptake. Nanomorphology of ionomers cast as 60–120 nm thin-films is characterized using grazing-incidence X-ray scattering. In situ fuel cell electrochemical diagnostic measurements were carried out to quantify the reactant (H + /O 2 ) transport properties of the CCL. Ionomer EW was found to play a major role with decreasing EW yielding higher proton conductivity and water uptake that led to lower bulk-H + and local-O 2 transport resistances in the CCL. Finally, a 1D-semi-empirical performance model has been developed to quantify the impact of ionomer EW on cell voltage loss factors.

08 HYDROGEN↗

A Modular Skid-Mounted Biomass Pyrolysis Unit

The Problem, Opportunity, and Proposed Approach: Political, economic, and environmental considerations require that the national dependence on petroleum-based transportation fuels, especially imported oil, be broken by accelerating the development of domestic renewable alternatives. The United States has the potential to generate, sustainably, about 1.3 billion dry tons of biomass per year, and bio-oil derived from this renewable feedstock could replace part of the currently used fossil fuels. Since a large proportion of the biomass-to-biofuel conversion is associated with transportation to central processing facilities, there is a great need to develop technologies for distributed biomass conversion to bio-oil, which can then be transported to biorefineries for further upgrading. The Project: The overall objective of this project is to develop a technology for distributed conversion of diverse biomass feedstocks to bio-oil. The project Phase I objectives were: (1) to demonstrate the technical and economic feasibility of distributed conversion of biomass to bio-oil; and (2) to produce a design of a prototype modular, skid-mounted biomass pyrolysis unit. Both objectives were successfully accomplished. Pyrolysis experiments were conducted in laboratory scale using 10 diverse biomass feedstocks to determine product yields and to characterize the produced oil. A skid-mounted unit was designed that is capable of processing two commercially important, and very different, biomass feedstocks: corn stover and Southern yellow pine. Conversion of other feedstocks should also be possible. The evaluation of Phase I data and an economic analysis were performed, and the technical and economic viability of the process was demonstrated. Commercial Applications and Other Benefits: The conversion of crop residues and crop processing wastes to fuels will provide numerous technical, economic, and environmental benefits to the Nation in general, and the agricultural sector in particular: (1) The fuels and chemicals produced will most likely replace those produced from fossil fuels, thus mitigating the dependence on foreign oil and the negative environmental impacts associated with the fossil fuels industry; (2) It will help spur the development of biorefineries, which will produce both fuels and chemicals from renewable materials and help alleviate climate change effects associated with combustion of fossil fuels; and (3) It will remove crop residues from landfills, where they take up valuable space and decompose to produce CH4 and CO2, both greenhouse gases. Summary for Members of Congress: Biomass is an abundant domestic energy resource that could provide renewable fuels at a price competitive with petroleum, if a distributed biomass-conversion technology is developed. This project addresses the critical problem of reducing the cost by extracting oil from bulky agricultural and forestry residues and transporting the oil to bio-refineries.

09 BIOMASS FUELS↗

Advances in GDSA Framework Development and Process Model Integration

The Spent Fuel and Waste Science and Technology (SFWST) Campaign of the U.S. Department of Energy (DOE) Office of Nuclear Energy (NE), Office of Spent Fuel & Waste Disposition (SFWD) is conducting research and development (R&D) on geologic disposal of spent nuclear fuel (SNF) and highlevel nuclear waste (HLW). A high priority for SFWST disposal R&D is to develop a disposal system modeling and analysis capability for evaluating disposal system performance for nuclear waste in geologic media. This report describes fiscal year (FY) 2020 advances of the Geologic Disposal Safety Assessment (GDSA) Framework and PFLOTRAN development groups of the SFWST Campaign. The common mission of these groups is to develop a geologic disposal system modeling capability for nuclear waste that can be used to probabilistically assess the performance of disposal options and generic sites. The capability is a framework called GDSA Framework that employs high-performance computing (HPC) capable codes PFLOTRAN and Dakota.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fused Global-Local Economic Model Predictive Control for Real-Time Eco-Optimal Control of a Heavy Duty Truck

This paper introduces a fused global-local economic model predictive control (MPC) with varying time steps for maximizing the fuel economy of a heavy-duty truck, where global MPC is performed over a long horizon using cloud-based dynamic programming (DP), and local MPC is performed on-board the vehicle using sequential quadratic programming (SQP). Because of the computational complexity of DP, an in-depth analysis of how the discretization levels, time constant, and horizon length influence the energy savings and computational complexity of online DP has been performed. The fused optimization technique has been evaluated over different route profiles, accounting for traffic, using a medium-fidelity proprietary Volvo model. Results show 4-7% fuel savings, as compared to a baseline model.

33 ADVANCED PROPULSION SYSTEMS↗

Performance of solid oxide fuel cells operated with coal syngas provided directly from a gasification process

Solid oxide fuel cells (SOFCs) are presently being developed for gasification integrated power plants that generate electricity from coal at 50+% efficiency. The interaction of trace metals in coal syngas with the Ni-based SOFC anodes is being investigated through thermodynamic analyses and in laboratory experiments, but direct test data from coal syngas exposure are sparsely available. This research effort evaluates the significance of SOFC performance losses associated with exposure of a SOFC anode to direct coal syngas. SOFC specimen of industrially relevant composition are operated in a unique mobile test skid that was deployed to the research gasifier at the National Carbon Capture Center (NCCC) in Wilsonville, AL. The mobile test skid interfaces with a gasifier slipstream to deliver hot syngas (up to 300°C) directly to a parallel array of 12 button cell specimen, each of which possesses an active area of approximately 2 cm2. During the 500 hour test period, all twelve cells were monitored for performance at four discrete operating current densities, and all cells maintained contact with a data acquisition system. Of these twelve, nine demonstrated good performance throughout the test, while three of the cells were partially compromised. Degradation associated with the properly functioning cells was attributed to syngas exposure and trace material attack on the anode structure that was accelerated at increasing current densities. Cells that were operated at 0 and 125 mA/cm² degraded at 9.1 and 10.7% per 1000 hours, respectively, while cells operated at 250 and 375 mA/cm² degraded at 18.9 and 16.2% per 1000 hours, respectively. Post-trial spectroscopic analysis of the anodes showed carbon, sulfur, and phosphorus deposits; no secondary Ni-metal phases were found.

Environmental Molecular Sciences Laboratory↗

Cost/Effort Drivers and Decision Analysis

Engineering trade study analyses demand consideration of performance, cost and schedule impacts across the spectrum of alternative concepts and in direct reference to product requirements. Prior to detailed design, requirements are too often ill-defined (only goals ) and prone to creep, extending well beyond the Systems Requirements Review. Though lack of engineering design and definitive requirements inhibit the ability to perform detailed cost analyses, affordability trades still comprise the foundation of these future product decisions and must evolve in concert. This presentation excerpts results of the recent NASA subsonic Engine Concept Study for an Advanced Single Aisle Transport to demonstrate an affordability evaluation of performance characteristics and the subsequent impacts on engine architecture decisions. Applying the Process Based Economic Analysis Tool (PBEAT), development cost, production cost, as well as operation and support costs were considered in a traditional weighted ranking of the following system-level figures of merit: mission fuel burn, take-off noise, NOx emissions, and cruise speed. Weighting factors were varied to ascertain the architecture ranking sensitivities to these performance figures of merit with companion cost considerations. A more detailed examination of supersonic variable cycle engine cost is also briefly presented, with observations and recommendations for further refinements.

Seidel, Jonathan↗

Multidimensional Numerical Simulations of Knocking Combustion in a Cooperative Fuel Research Engine

A numerical approach was developed based on multidimensional computational fluid dynamics (CFD) to predict knocking combustion in a cooperative fuel research (CFR) engine. G-equation model was employed to track the turbulent flame front and a multizone model was used to capture auto-ignition in the end-gas. Furthermore, a novel methodology was developed wherein a lookup table generated from a chemical kinetic mechanism could be employed to provide laminar flame speed as an input to the Gequation model, instead of using empirical correlations. To account for fuel chemistry effects accurately and lower the computational cost, a compact 121-species primary reference fuel (PRF) skeletal mechanism was developed from a detailed gasoline surrogate mechanism using the directed relation graph (DRG) assisted sensitivity analysis (DRGASA) reduction technique. Extensive validation of the skeletal mechanism was performed against experimental data available from the literature on both homogeneous ignition delay and laminar flame speed. The skeletal mechanism was used to generate lookup tables for laminar flame speed as a function of pressure, temperature, and equivalence ratio. The numerical model incorporating the skeletal mechanism was employed to perform simulations under research octane number (RON) and motor octane number (MON) conditions for two different PRFs. Parametric tests were conducted at different compression ratios (CR) and the predicted values of critical CR, delineating the boundary between “no knock” and “knock,” were found to be in good agreement with available experimental data. The virtual CFR engine model was, therefore, demonstrated to be capable of adequately capturing the sensitivity of knock propensity to fuel chemistry.

CFD↗

Improvement of the $\mathrm{BISON U_3Si_2}$ modeling capabilities based on multiscale developments to modeling fission gas behavior

Uranium silicide (U 3 Si 2 ) is a concept explored as a potential alternative to UO 2 fuel used in light water reactors (LWRs) since it may improve accident tolerance and economics due to its higher thermal conductivity and increased uranium density. U 3 Si 2 has been previously used in research reactors in the form of dispersion fuel, but operated at lower temperatures than commercial LWRs. The research reactor data illustrated that significant gaseous swelling occurs as the fuel burnup increases. Therefore, it is imperative to understand the fission gas behavior of U 3 Si 2 under higher temperature LWR operating conditions. In this work, molecular dynamics and phase-field modeling techniques are used to reduce the uncertainty in select modeling assumptions made in developing the fission gas behavior model for U 3 Si 2 in the BISON fuel performance code. These lower length scale informed models are then utilized in the validation of BISON U 3 Si 2 modeling capabilities to simulate the ATF-1 experiments irradiated in the Advanced Test Reactor (ATR). Sensitivity analysis (SA) and uncertainty quantification (UQ) are included as part of the validation process to identify where further experiments and lower length scale modeling would be beneficial. Here, the multiscale modeling approach utilized in this work can be applied to new fuel concepts being explored for both LWRs and advanced reactors (e.g., uranium nitride, uranium carbide).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of LWR Fuels with Enhanced Accident Tolerance ATF Feasibility Analysis and Final Technical Report Deliverable for the Westinghouse Accident Tolerant Fuel Program (Rev. 2)

The beyond design basis accident at Fukushima Daiichi in March 2011 and the Three Mile Island accident in 1979 imply that severe nuclear accidents may occur at somewhat higher frequencies than previously predicted, and that the financial liabilities of such accidents can cripple a utility. While current fuel is more than adequate for design basis accidents, the potential for harm from beyond design basis accidents (BDBA) has been a driver for Westinghouse development efforts since 2003. After Fukushima, other fuel vendors also began pursuing new fuel materials that can provide significant increases in the time, enabling reactor operators to respond to unforeseen events before significant releases of fuel materials and fission products occur. In order to be commercially successful, accident tolerant fuel (ATF) products must also provide significant fuel cost savings, operating cost improvements as well as safety improvements. This report documents the engineering, design and testing that occurred from October 1, 2016, through September 30, 2018, by the Westinghouse team. In addition, it includes: 1. The results of modeling and simulation work completed to date that supports technical feasibility of the ATF concept in meeting the goals of the enhanced ATF program including a core level analysis predicting how an existing LWR will perform when loaded with ATF. 2. Regulatory Analysis showing path to LTA/LTR acceptance. 3. Business Analysis showing commercial viability of the ATF concept.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Independent Orbiter Assessment (IOA): Analysis of the Electrical Power Distribution and Control Subsystem, Volume 2

The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA approach features a top-down analysis of the hardware to determine failure modes, criticality, and potential critical items. To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. This report documents the independent analysis results corresponding to the Orbiter Electrical Power Distribution and Control (EPD and C) hardware. The EPD and C hardware performs the functions of distributing, sensing, and controlling 28 volt DC power and of inverting, distributing, sensing, and controlling 117 volt 400 Hz AC power to all Orbiter subsystems from the three fuel cells in the Electrical Power Generation (EPG) subsystem. Volume 2 continues the presentation of IOA analysis worksheets and contains the potential critical items list.

Schmeckpeper, K. R.↗

Evaluation of BISON's Transient Fission Gas Release Model on High-Burnup UO 2 MiniFuel

BISON's fission gas release (FGR) model has been evaluated and tested over several hypothetical thermal transient cases at high burnup and validated against FGR experimental data from an annealing test at high burnup. Diffusion-controlled FGR is accounted for in the model by including several physical mechanisms such as the diffusion of fission gas to grain faces, grain boundary sweeping, grain growth, and intergranular bubble growth. Under temperature variations, FGR is increased due to the development of micro-cracks at grain faces. This existing transient capability, however, was developed based on transient fuel behavior during power ramps and the associated micro-cracking process. Nevertheless, a fraction of the FGR during temperature transients such as LOCA can ensue from different mechanisms (in particular, fuel fragmentation) and present an important dependency on local burnup and high burnup structure formation. It follows that the performance and necessary developments of the existing BISON fission gas model for the analysis of LOCA-type transients need to be investigated through a systematic assessment study. Such a study is performed in this work. The model shows an overall good qualitative agreement with experimental observations on FGR during annealing tests with different temperature conditions. It also accounts well for microstructural effects on FGR. When quantitatively compared to FGR data from previously irradiated 103 MWd/kgU UO 2 discs under thermal annealing, the model shows a less satisfactory agreement with the experimental data.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Stability and convergence analysis of the quasi-dynamics method for the initial pebble packing

The simulation for the pebble flow recirculation within Pebble Bed Reactors (PBRs) requires an efficient algorithm to generate an initial overlap-free pebble configuration within the reactor core. In the previous work, a dynamics-based approach, the Quasi-Dynamics Method (QDM), has been proposed to generate densely distributed pebbles in PBRs with cylindrical and annular core geometries. However, the stability and the efficiency of the QDM were not fully addressed. In this work, the algorithm is reformulated with two control parameters and the impact of these parameters on the algorithm performance is investigated. Firstly, the theoretical analysis for a 1-D packing system is conducted and the range of the parameter in which the algorithm is convergent is estimated. Then, this estimation is verified numerically for a 3-D packing system. Finally, the algorithm is applied to modeling the PBR fuel loading configuration and the convergence performance at different packing fractions is presented. Results show that the QDM is efficient in packing pebbles within the realistic range of the packing fraction in PBRs, and it is capable in handling cylindrical geometry with packing fractions up to 63.5%. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Impact of U-10Mo HALEU Fuel Element Tolerances on the Massachusetts Institute of Technology Reactor safety and operational performance – Neutronics

The U.S. is coordinating efforts for the conversion of six U.S. high performance research reactors (USHPRR), including one critical assembly from highly enriched uranium (HEU) to low-enriched uranium (LEU). In order to continue the mission of these reactors, including the Massachusetts Institute of Technology Reactor (MITR), and achieve similar performance, high assay low-enriched uranium (HALEU) with a high-density metallic alloy of uranium with 10 wt% molybdenum (U-10Mo) is being considered. Following the preliminary design of the proposed MITR LEU fuel elements using the U-10Mo monolithic alloy, the impact of the fabrication specification was assessed. This work focuses on the analysis of select neutronics characteristics of the MITR LEU core as a function of the variation of the relevant fuel specification parameters (e.g., U-10Mo composition, fuel plate thickness, etc.). A separate article submitted to this journal addresses the impact on the thermal hydraulic performance. The analyses in these works are performed based on an all-LEU conversion management plan identified in previous work, in which only the proposed elements are utilized for achieving the conversion of MITR. The variations of two main neutronics characteristics are assessed as a function of the variability of the specification parameters resulting from the fabrication process: the MITR LEU core reactivity and the fuel cycle length. The main findings of this work show that the MITR core can meet the operational requirements during the LEU transition plan under the limiting fabrication parameter combinations considered. In addition, the analyses show that the dependency of the core neutronics characteristics on the specification parameters is highly linear within the specification tolerances. The rates of variation are reported in detail for each parameter and can serve as a powerful tool for future MITR fuel management in cases such as when HALEU supply is established that may allow additional cycle length or other operational benefits.

Conversion↗

Criticality Benchmarking of the Oregon State TRIGA Reactor Using the MCNP Burn Option

Neutronic analyses of the Oregon State TRIGA Reactor (OSTR) have historically been performed using a thoroughly validated MCNP model. This model was originally created in 1997 in support of boron neutron capture therapy (BNCT) research, when the core still utilized highly-enriched uranium (HEU) fuel. The OSTR core was converted to low-enriched uranium (LEU) in the fall of 2008. To more accurately represent the converted state of the core, the MCNP model was modified to incorporate fuel material information from the fuel manufacturer (AREVA). In previous versions of the model, the fuel elements were assumed to have a uniform isotopic composition. Chemical analysis from AREVA provided far more resolved material information, allowing for increased fidelity in the representation of the fuel. The model was also updated to ENDF/B-VII.1 cross section libraries as the previous model utilized ENDF/B-VI. The primary impetus for the update of the MCNP model was the desire to have a more accurate assessment of criticality conditions of the OSTR. The OSTR utilizes three core configurations which are defined by the contents of the B1 grid position. If fuel resides in B1, this is designated as the 'normal' core. Otherwise, there are two aluminum in-core irradiation tubes (ICITs) that can be placed in B1. There is an unlined tube, designated simply as the ICIT, and there is a cadmium-lined tube, designated as the CLICIT. Table 1 contains a summary of the results of a series of MCNP criticality calculations which used the original 'fresh fuel' isotopics from the fall of 2008 in conjunction with critical rod height data from December 2013. Calculations were performed at 15 W, which is where the daily core excess measurements are taken, and at 1 MW, which is the current full-power level at the OSTR. The k-effective values indicate that the fresh fuel material cards are highly inaccurate and over-predict the criticality by at least $1.20 in every core configuration (based on a β{sub eff} value of 0.0075), thus it was desired to perform a depletion calculation to obtain more accurate fuel information. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗