Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTERSTITIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Annealing texture of nanostructured IF steel

In the present work, the evolution of annealing texture in nanostructured interstitial free steel fabricated via accumulative roll bonding (ARB) process was investigated. Textural evolution after post-annealing of ARB-processed samples was evaluated using X-ray diffraction. There were several texture transitions in the γ-fiber and ζ-fiber during ARB and post-annealing treatment. It was found that with increasing the number of ARB cycles, the volume fraction of the low angle grain boundary decreased and the high angle grain boundary fraction increased. Also, the shear texture was dominant after the first cycle, while for other samples, the rolling texture was dominant. The one-cycle sample clearly indicated a weak α-fiber and γ-fiber and a relatively strong ζ-fiber. In addition, during the recrystallization and before the grain growth, the intensity of α-fiber and γ-fiber decreased, the intensity of ζ-fiber increased, and the intensity of (011)〈100〉 orientation in the ε-fiber and η-fiber increased. Moreover, it was concluded that the transition from the rolling texture to the shear one was a sign of occurrence of the recrystallization (before the grain growth). Finally, with increasing the number of ARB cycles, the intensity of rolling and shear textures saturated and a stable texture formed. - Highlights: • There were texture transitions in the γ-fiber and ζ-fiber. • When the number of cycles increased, the low angle grain boundaries decreased. • The shear texture was dominant after the first cycle. • Transition from rolling texture to shear one was a sign of recrystallization. • With increasing the number of ARB cycles, a stable texture formed.

36 MATERIALS SCIENCE↗

Microstructural characterization of sulfur-doped Bi{sub 2}Te{sub 3} crystals

In this study, the detailed microstructure of sulfur-doped Bi{sub 2}Te{sub 3} and the distribution of sulfur dopants were investigated using X-ray diffraction (XRD) and transmission electron microscopy (TEM). XRD result indicates that the interplanar distances of Bi{sub 2}Te{sub 3} are shortened after introducing sulfur dopants. HRTEM reveals that the unit cell lengths along [001, 100] are decreased as a result of the substitution of Te by smaller S atoms on the anion lattice. XRD and HRTEM analysis suggest that the distortion of the crystal lattice in Bi{sub 2}Te{sub 3} is induced by doping sulfur. High annular angler dark field scanning electron microscopy (HAADF-STEM) image shows obvious contrast variations in the Te atomic columns, indicating that Te sites were unevenly substituted by S dopants. Te columns with least contrast intensity correspond to the preferential occupation sites of S atoms. The replacement of Te atoms by S can be attributed to the evaporated sulfur powder in the gas reaction procedure. The present work is not only contributed to obtain a better understanding of the distribution of sulfur dopants introduced by gas reaction, but also can help explore the structural-property relationship of sulfur-doped Bi{sub 2}Te{sub 3}. - Highlights: • Sulfur-doped Bi{sub 2}Te{sub 3} was synthesized through modified Bridgeman method. • The introduction of S dopants results in shortening the lattice spacing of Bi{sub 2}Te{sub 3}. • HRTEM analysis indicates that S was doped through substituting Te atoms instead of incorporating interstitially. • HAADF-STEM analysis shows that Te columns with least intensity correspond to the preferential occupation sites of S.

36 MATERIALS SCIENCE↗

Microstructural evolution and mechanical properties on an ARB processed IF steel studied by X-ray diffraction and EBSD

Accumulative Roll Bonding (ARB) is one of the so-called severe plastic deformation (SPD) processes, allowing the production of metals and alloys with ultrafine (micro-nano) structures. Materials with ultrafine grains present attractive properties like the simultaneous increase in strength and ductility. Our interest in these materials is focused on their microstructural evolution during ARB processing, eventually responsible for the enhancement of those mechanical properties. In the current work we follow the evolution of the microstructure in an interstitial-free (IF) steel deformed by ARB after consecutive processing cycles, by means of Electron BackScatter Diffraction (EBSD) and X-ray diffraction (XRD). Particularly, we present results related to texture, grain (GS) and domain sizes, grain boundary character, density of Geometrically Necessary Dislocations (GND), Grain Orientation Spread (GOS), lattice parameters, microstrain, dislocation density and their spatial arrangement. After 5 ARB cycles the system shows a microstructure constituted mainly by submicrometric grains with high angle boundaries and low presence of dislocations inside the grains. - Highlights: •The evolution of microstructure is followed simultaneously by using GAM, GOS and GND (EBSD) and XRD. •LAGBs and subgrains disappear after few cycles SSDs and HAGBs persist at the end. •Dynamic recrystallization counterbalances dislocation arrays and diminishes hardening rate. •Grain size stabilization is revealed as a mechanism for increasing ductility after few ARB cycles.

36 MATERIALS SCIENCE↗

Radiation-induced extreme elastic and inelastic interactions in concentrated solid solutions

One of the biggest challenges in the radiation induced defect science is to understand the complex nature of ion-atom interactions under highly extreme conditions. Here, we report the irradiation induced non-equilibrium defect formation in NiCoCr single phase concentrated solid solution alloy due to (i) the extreme inelastic and (ii) the coupled inelastic and elastic ion-atom interactions. These two conditions are achieved at 5 and 30 μm penetration depths along the paths of swift heavy ions (1.542 GeV Bi). In general, the irradiation induced damage consists of interstitial-type dislocation loops and vacancy-type stacking fault tetrahedra (SFT). Near the surface (~5 μm) where electronic energy loss is dominating (~62.5 keV nm –1 ), the atomic motion primarily results in the formation of SFT. A noticeable increase of dislocation loop formation is observed at 30 μm near the maximum energy deposition from elastic interactions (~4.9 keV nm –1 ), as compared to the near surface region (~0.06 keV nm –1 ). As a result, insights on the complex electronic and atomic correlations of extreme energy deposition and dissipation on defect dynamics and structural stability may pave the way for new design principles of radiation–tolerant structural alloys.

36 MATERIALS SCIENCE↗

Effects of Fe atoms on hardening of a nickel matrix: Nanoindentation experiments and atom-scale numerical modeling

Significant hardening effect due to Fe concentrations in Ni-based alloys with face-centered-cubic structure has been studied by using a combined experimental and atomistic-based computational approach via nanoindentation tests. The obtained experimental load–displacement data for the [0 0 1] crystal orientation reached a qualitative good agreement with molecular dynamics simulations results, leading to strong evidence that the main strengthening factors are associated to sluggish dislocation diffusion, reduced defect sizes and the nucleation of tetrahedral stacking faults. Here, interstitial type prismatic dislocation loops mainly formed by $\frac{1}{6}$$\langle$1 1 2$\rangle$ Shockley dislocations are nucleated during the loading process, where their interaction leads to the formation of pyramidal shaped stacking fault which are mainly created by $\frac{1}{3}$$\langle$1 0 0$\rangle$ Hirth dislocations lines. Observing both types of defects coexisting in the same plastic deformation zone by both approaches. Reported mechanical data, measured experimentally and interpreted numerically, are also in accordance with microstructural SEM and TEM investigations.

36 MATERIALS SCIENCE↗

Analysis of position-dependent cavity parameters in irradiated metals to obtain insight on fundamental defect migration phenomena

Motion of point defects is a fundamental process that governs microstructure and properties of materials. Here, we examine the near-surface and grain boundary cavity swelling depth profiles in neutron- and ion-irradiated simple metals (Cu, Ni, and Fe-Cr) and investigate diffusional broadening of implanted Ni ions in Fe-Cr alloys. Vacancy migration energies and radiation-enhanced diffusion were experimentally estimated. Cavity denuded zone widths near planar sinks are shown to be dependent on temperature, damage rate, balance of point defects and sinks, and vacancy migration energies. An enhanced cavity swelling zone adjacent to the void-denuded zone was observed in specimens with low to moderate sink strength and interpreted as evidence of 1D gliding interstitial clusters. Radiation-enhanced diffusional broadening of implanted Ni ions (at 400–550 °C) in Fe and Fe-Cr was up to 250 nm toward the surface, which leads to a much broader near-peak-damage region where cavity swelling is suppressed. Diffusional broadening of implanted ions is calculated to be similarly pronounced for self-ion irradiations, particularly near the peak and higher swelling temperature regimes. Adequately high ion energies (~8–15 MeV) are recommended for ion-irradiation studies to provide a sufficiently broad midrange safe analysis region with minimized surface and injected ion effects.

36 MATERIALS SCIENCE↗

Solidification cracking of refractory alloys: a computational and machine learning study to investigate composition-dependence for improved weldability and additive manufacturability

Large-batch numerical, CALculation of PHAse Diagrams (CALPHAD)-based solidification cracking calculations are performed and then analyzed with machine learning methods to generate models that relate chemistry of refractory alloys to cracking susceptibility. Kou’s solidification cracking index is used to study the refractory alloys including O, N, C binary mixtures with Mo, Ta, Nb, and W, the molybdenum-based TZM, Niobium-based C103, and Tantalum-based T111 and Ta-10 W, as well as hypothetical refractory ternary alloys. Findings strongly validate Kou’s Crack Susceptibility Index (CSI) against Varestraint test data for Nb- and Ta-based alloys, establishing CSI thresholds where refractory alloys with CSI < 15,000 K are likely weldable, CSI > 15,000 K are prone to cracking, and CSI > 25,000 K are likely unweldable (or unprintable). Furthermore, interstitial elements C, N, and O significantly increase crack susceptibility, with some existing material specifications coinciding with peak cracking susceptibility concentrations. Finally, machine learning-derived elemental potency factors enable rapid prediction of CSI from alloy chemistry for C103, TZM, Ta-10 W, and T-111 alloys. These results provide practical guidance for feedstock selection, powder reuse limits, and alloy specification amendments for welding and additive manufacturing applications.

36 MATERIALS SCIENCE↗

One-step through-mask electrodeposition of a porous structure composed of manganese oxide nanosheets with electrocatalytic activity for oxygen reduction

Potentiostatic electrolysis of a mixed aqueous solution of Bu{sub 4}NBr and MnSO{sub 4} at +1.0 V (vs. Ag/AgCl) on Pt electrode led to the oxidation of Br{sup -} and Mn{sup 2+} ions. X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and X-ray diffraction (XRD) revealed that this anodic process was followed by the deposition of insulating crystals of bromide salt of Bu{sub 4}N{sup +} and the subsequent formation of layered manganese oxide in the interstitial spaces of the bromide grains already grown. Dissolution of the bromide crystals in water left a well-dispersed porous texture composed of manganese oxide nanosheets. The resulting MnO{sub x}-modified electrode exhibited a larger catalytic current for the reduction of oxygen in alkaline solution, compared to the bare Pt electrode.

36 MATERIALS SCIENCE↗

Ambi-site substitution of Mn in lanthanum germanate apatites

A neutron diffraction study at 4 K of the Mn doped lanthanum germanate apatite-type oxide ion conductor of nominal starting composition 'La{sub 9.5}Mn{sub 0.5}(GeO{sub 4}){sub 6}O{sub 2.75}' is reported. The structure was refined in space group P6{sub 3}/m, although high thermal displacement parameters were observed for the oxide ion sites (particularly O3, and O4). Reduced thermal displacement parameters were obtained by splitting the O3 site, and allowing the O4 oxygen to move off site, which may indicate local regions of lower symmetry within the structure. In addition, the data suggested ambi-site substitution of Mn, with it being present on both the Ge site and the La site. Assuming no change in La:Mn:Ge ratio, a composition of La{sub 9.18}Mn{sub 0.28}(GeO{sub 4}){sub 5.8}(MnO{sub 4}){sub 0.2}O{sub 2} was determined. As such there are nominally no interstitial oxide ions, but rather cation vacancies on the La site. Therefore, the high conductivity for this sample is most likely related to the introduction of Frenkel-type defects at higher temperature, as previously proposed for other apatite-type systems containing vacancies on the La site.

36 MATERIALS SCIENCE↗

(Ca{sup 2+}, V{sup 5+}) co-doped Y{sub 2}Ti{sub 2}O{sub 7} yellow pigment

(Ca{sup 2+}, V{sup 5+}) co-doped Y{sub 2}Ti{sub 2}O{sub 7} yellow pigments were prepared by solid route. The influence of the annealing temperature, the vanadium rate (0.02 {<=} x {<=} 0.3) and a post-mechanical grinding on the phase purity and the colour were studied using X-ray diffraction and UV-vis spectroscopy. The correlation between pigment colouration, synthesis parameters and structural feature is then discussed. Pigments with various colourations from yellow to deep orange can be obtained depending on the synthesis parameters linked to a slight modification of the vanadium coordination environment. For a same composition, the pigment colouration depends on the creation of Frenkel pairs inside the structure corresponding to a displacement of an oxygen atom toward one interstitial empty site.

36 MATERIALS SCIENCE↗

Tunneling behavior in ion-assist ion-beam sputtered CoFe/MgO/NiFe magnetic tunnel junctions

Graphical abstract: Display Omitted Highlights: ► Dual ion beam sputtered MgO barrier for MTJs. ► ∼12% TMR at 60 K. ► Glazman and Matveev model fitted for quantification of elastic and inelastic tunneling conductance through barrier. -- Abstract: Magnetic tunnel junctions (MTJs) consisting of CoFe and NiFe as ferromagnetic electrodes and MgO as insulating barrier fabricated through in situ shadow masking employing ion beam sputtering are studied for their tunneling magnetoresistance (TMR) and temperature dependence of the tunneling conductance behavior. The tunneling characteristics of these MTJs exhibited barrier height of 0.7 eV and width of 3.3 nm. These MTJs possessed ∼12% TMR at 60 K. The temperature dependence of conductance behavior of these junctions have revealed finite contributions from inelastic tunneling through the barrier via hopping conduction via present localized states which arise due to the presence of ionic interstitial defects in the MgO oxide barrier. The fitting of the data reveals that thirteenth order of hopping conduction is operative through MgO barrier.

36 MATERIALS SCIENCE↗

Study of interatomic potential and thermal structural properties of β-Zn{sub 4}Sb{sub 3}

Highlights: ► The multi-body interatomic potentials of various models of β-Zn{sub 4}Sb{sub 3} have been developed to describe atomic interactions. ► The radial distribution function shows that the 10% vacancy of Zn site leads to the disorder of β-Zn{sub 4}Sb{sub 3}. ► The 10% vacancy of Zn site is the main cause of the exceptional low thermal conductivity. -- Abstract: Previous experimental research shows that the disordered Zn atoms in β-Zn{sub 4}Sb{sub 3} may have an important influence on its exceptionally low thermal conductivity and easily occurred phase transition. So the present work aims to study the influence of disordered Zn atoms on thermodynamics properties of β-Zn{sub 4}Sb{sub 3} by using molecular dynamics (MD) method. Firstly, based on first principles calculation and experimental results, the interatomic potentials of β-Zn{sub 4}Sb{sub 3} and MD analysis method are established, and the feasibility is verified. Then, the influence of disordered Zn atoms on thermal conductivity of β-Zn{sub 4}Sb{sub 3} is studied in detail. The simulation results indicate that the 10% vacant Zn atoms is the main reason for the exceptionally low thermal conductivity of β-Zn{sub 4}Sb{sub 3}, and it seems that the interstitial Zn atoms have little effect on its thermal conductivity.

36 MATERIALS SCIENCE↗

Cation distribution in Ni–Cu–Zn nanoferrites from {sup 57}Fe in-field Mössbauer spectra

Highlights: • Occupancy of copper ions at about 20% towards tetrahedral sites. • Distribution is proposed on the basis of % of Fe ions at both A and B sites. • Distribution is checked by estimating the theoretical lattice constant values. - Abstract: The nanoparticles of Ni{sub 1−x}Cu{sub x}Zn{sub 0.35}Fe{sub 2}O{sub 4} were synthesized by sol–gel method using polyvinyl alcohol as a chelating agent. X-ray diffraction patterns of all the samples confirmed the single phase spinel structure. The site occupancy of copper in the nanosized nickel–zinc ferrite spinels was investigated with the help of in-field Mössbauer spectroscopy. Cation distribution for the whole series of compositions was proposed by considering the amounts of iron ions present at both tetrahedral and octahedral interstitial sites in the spinel lattice. Confirmation of the proposed distributions was done by estimating quantitatively the lattice parameters for these compositions and comparing their values with those of the experimentally observed ones.

36 MATERIALS SCIENCE↗

Photocatalytic characteristics of single phase Fe-doped anatase TiO{sub 2} nanoparticles sensitized with vitamin B{sub 12}

Highlights: • Anatase TiO{sub 2}/B{sub 12} hybrid nanostructured catalyst was successfully synthesized by sol–gel technique. • The nanoparticle catalyst was doped with iron at several concentrations. • Nanoparticles were characterized in detail by XRD, Raman, TEM, EDS, and spectroscopy techniques. • The formation mechanism and role of point defects on photocatalytic properties were discussed. • A structure-property-processing correlation was established. - Abstract: We report a processing-structure-property correlation in B{sub 12}-anatase titania hybrid catalysts doped with several concentrations of iron. Our results clearly show that low-level iron doping alters structure, defect content, and photocatalytic characteristics of TiO{sub 2}. XRD and Raman studies revealed formation of a single-phase anatase TiO{sub 2} where no iron based segregation in particular iron oxide, was detected. FT-IR spectra clearly confirmed sensitization of TiO{sub 2} nanoparticles with vitamin B{sub 12}. TEM micrographs and diffraction patterns confirmed crystallization of anatase nanoparticles with a radius of 15–20 nm. Both XRD and Raman signals showed a peak shift and a peak broadening which are surmised to originate from creation of point defects, namely oxygen vacancy and titanium interstitial. The doped samples revealed a narrower band gap as compared to undoped samples. Photocatalytic activity of the samples was assessed through measuring the decomposition rate of rhodamine B. It was found that sensitization with vitamin B{sub 12} and Fe-doping significantly enhances the photocatalytic efficiency of the anatase nanoparticles. We also showed that there is an optimum Fe-doping level where the maximum photocatalytic activity is achieved. The boost of photocatalytic activity was qualitatively understood to originate from a more effective use of the light photons, formation of point defects, which enhance the charge separation, higher carrier mobility.

36 MATERIALS SCIENCE↗

Effect of rare earth Ce on the far infrared radiation property of iron ore tailings ceramics

Highlights: • Detailed process proposed for preparation of iron ore tailings ceramics. • Replace natural minerals with iron ore tailings as raw materials for preparing functional ceramics. • Impact mechanism of Ce on far infrared ceramics, as well as its optimum addition amounts can be obtained. • Propose a new perspective on considering the mechanism of far infrared radiation. - Abstract: A kind of far infrared radiation ceramics was prepared by using iron ore tailings, CaCO{sub 3} and SiO{sub 2} as main raw materials, and Ce as additive. The result of Fourier transform infrared spectroscopy showed that the sample exhibits excellent radiation value of 0.914 when doping 7 wt.% Ce. Ce{sup 4+} dissolved into iron diopside and formed interstitial solid solution with it sintered at 1150 °C. The oxidation of Fe{sup 2+} to Fe{sup 3+} caused by Ce{sup 4+} led to a decrease of crystallite sizes and enhancement of Mg–O and Fe–O vibration in iron diopside, which consequently improved the far infrared radiation properties of iron ore tailings ceramics.

36 MATERIALS SCIENCE↗

Effect of structure, size and copper doping on the luminescence properties of ZnS

Highlights: • Blue and green emission intensity form ZnS is sensitive to crystallographic form. • For ZnS nanoparticles, emission characteristics are not affected by copper doping. • Cu solubility poor in ZnS nanoparticles compared to corresponding bulk. - Abstract: Luminescence properties of wurtzite and cubic forms of bulk ZnS have been investigated in detail and compared with that of ZnS nanoparticles. Blue emission observed in both hexagonal and cubic forms of undoped bulk ZnS is explained based on electron–hole recombination involving electron in conduction band and hole trapped in Zn{sup 2+} vacancies where as green emission arises due to electron hole recombination from Zn{sup 2+} and S{sup 2−} vacancies. Conversion of wurtzite form to cubic form is associated with relative increase in intensity of green emission due to increased defect concentration brought about by high temperature heat treatment. Copper doping in ZnS, initially leads to formation of both Cu{sub Zn} and Cu{sub i} (interstitial copper) centers, and latter to mainly Cu{sub Zn} centers as revealed by variation in relative intensities of blue and green emission from the samples.

36 MATERIALS SCIENCE↗

Mo-N-co-doped mesoporous TiO{sub 2} microspheres with enhanced visible light photocatalytic activity

Highlights: • The Mo-N-co-doped mesoporous TiO{sub 2} microspheres were synthesized via a solvothermal method and further nitriding treatment. • The properties of TiO{sub 2} microspheres can be tuned by Mo-N-co-doping. • Photocatalytic rate is much higher than Pure TiO{sub 2} catalyst powder and Mo doped TiO{sub 2} microspheres. • The higher activity is attributed to the large BET surface area, narrow band gap and intense light absorbance in visible region. - Abstract: Mo-N-co-doped mesoporous TiO{sub 2} microspheres were synthesized via a solvothermal method, followed by nitriding treatment under ammonia gas flow. The efficiency of the samples was investigated by monitoring the degradation of Rhodamine-B under visible light irradiation. The experimental results revealed that Mo-N-co-doped mesoporous TiO{sub 2} microspheres showed better performances than Mo-TiO{sub 2} microspheres. It was observed that; 0.1% molar quantity of Mo doped on TiO{sub 2} at 500 °C for 2 h under nitriding conditions gave highest photocatalytic activities. The nitridation under ammonia gas of Mo-TiO{sub 2} samples created oxygen vacant sites and led to incorporation of substitutional and interstitial Nitrogen. The enhanced visible light photocatalytic activities of Mo-N-co-doped TiO{sub 2} photocatalyst was attributed to the large surface areas, narrow band gap and intense light absorbance in visible region. This study may create a promising and eco-friendly method towards synthesis of metal and non-metals co-doped on semiconductor materials to improve their photocatalytic activities and applications.

36 MATERIALS SCIENCE↗

Easily separable N-doped ZnO microspheres with high photocatalytic activity under visible light

Highlights: • N-doped ZnO microspheres are successfully prepared for environmental photocatalysis. • N doping is responsible for the highly improved photocatalytic activity. • The microspheres are easily separated from the suspension system by sedimentation. - Abstract: Here, two strategies are simultaneously applied to ZnO for easy separation of the photocatalyst particles by forming micron-sized spheres and for extension of the spectral response into the visible region by nitrogen doping. The prepared nitrogen-doped ZnO microspheres show highly improved photocatalytic activity for the degradation of humic acid (HA), a complex refractory organic compound, under visible light. Substitutional and interstitial doping of nitrogen are behind the improved visible light absorption and photocatalytic activity. Using 1 g/L of N-doped ZnO with urea/Zn molar ratio of 3, 95.4% of HA with an initial concentration of 5 mg/L can be degraded within 80 min of visible light irradiation of 122 mW/cm{sup 2}. Under identical experimental conditions, almost complete mineralization of HA is achieved within 12 h. Holes and hydroxyl radicals are mainly responsible for the degradation of HA. Significant reduction of toxicity of the photocatalytically treated HA solution is realized within 9 h.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗