Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETORESISTANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Studies of Novel Quantum Phenomena in Ruthenates

Strongly correlated oxides have been the subject of intense study in contemporary condensed matter physics, and perovskite ruthenates (Sr,Ca)n+1RunO3n+1 have become a new focus in this field. One of important characteristics of ruthenates is that both lattice and orbital degrees of freedom are active and are strongly coupled to charge and spin degrees of freedom. Such a complex interplay of multiple degrees of freedom causes the properties of ruthenates to exhibit a gigantic response to external stimuli under certain circumstances. Magnetic field, pressure, and chemical composition all have been demonstrated to be effective in inducing electronic/magnetic phase transitions in ruthenates. Therefore, ruthenates are ideal candidates for searching for novel quantum phenomena through controlling external parameters. The objective of this project is to search for novel quantum phenomena in ruthenate materials using high-quality single crystals grown by the floating-zone technique, and investigate the underlying physics. The following summarizes our accomplishments. We have focused on trilayered Sr4Ru3O10 and bilayered (Ca1-xSrx)3Ru2O7. We have succeeded in growing high-quality single crystals of these materials using the floating-zone technique and performed systematic studies on their electronic and magnetic properties through a variety of measurements, including resistivity, Hall coefficient, angle-resolved magnetoresistivity, Hall probe microscopy, and specific heat. We have also studied microscopic magnetic properties for some of these materials using neutron scattering in collaboration with Los Alamos National Laboratory. We have observed a number of unusual exotic quantum phenomena through these studies, such as an orbital selective metamagnetic transition, bulk spin valve effect, and a heavy-mass nearly ferromagnetic state with a surprisingly large Wilson ratio. Our work has also revealed underlying physics of these exotic phenomena. Exotic phenomena of correlated electron has been among central topics of contempary condensed matter physics. Ultrfast phase transitions accompanied by switching of conductivity or magnetization in stronly correlated materials are believed to be promising in developing next generation of transistors. Our work on layered ruthenates has remarkably advanced our understanding of how the exotic phenomena of correlated electrons is governed by the complex interplay between charge, spin, lattice and orbital degrees of freedom. In addition to studies on ruthenates, we have also expanded our research to the emerging field of Fe-based superconductors, focusing on the iron chalcogenide Fe1+y(Te1-xSex) superconductor system. We first studied the superconductivity of this alloy system following the discovery of superconductivity in FeSe using polycrystalline samples. Later, we successfuly grew high-quality single crystals of these materials. Using these single crystals, we have determined the magnetic structure of the parent compound Fe1+yTe, observed spin resonance of superconducting state in optimally doped samples, and established a phase diagram. Our work has produced an important impact in this burgeoning field. The PI presented an invited talk on this topic at APS March meeting in 2010. We have published 19 papers in these two areas (one in Nature materials, five in Physical Review Letters, and nine in Physical Review B) and submitted two (see the list of publications attached below).

36 MATERIALS SCIENCE↗

Spin-Torque in Systems with Inhomogeneous Magnetization

The work performed during the grant period focused on the phenomenon of spin-transfer torque. This is a quantum mechanical effect whereby the angular momentum of conduction electrons is transferred to the magnetization of ferromagnetic structures. Our work on this subject began with phenomenological drift-diffusion and Landau-Lifshitz-Gilbert equations to demonstrate unambiguously that unpolarized current flow from a nonmagnet into a ferromagnet can produce a precession-type instability of the magnetization. We then used Boltzmann calculations appropriate to spin-valve type magnetic heterostructures composed of a non-magnetic thin film sandwiched between two thin film layers with uniform magnetization. Perhaps our most important paper dealt with quantum and semi-classical calculations of spin-transfer torque in systems with domain walls and other inhomogeneous distributions of magnetization. The latter work caused us to suggest that the Landau-Lifshitz approach to magnetic damping provided a clearer picture of the physics than the more popular (but formally equivalent) Gilbert approach to damping. Finally, we returned to our Boltzmann calculations and made a serious effort to analyze experimental data on current-induced magnetization in switching in magnetic spin-valve structures. Our work was part of a world-wide effort to study and harness the transport of the electron's spin and was one of the first sustained theoretical efforts in this direction in the United States. The payoff is just now being seen. In November of 2012, the Everspin Corporation announced the release of the first commercial spin-torque magnetoresistive random access memory.

36 MATERIALS SCIENCE↗

Final Report: Stability and Novel Properties of Magnetic Materials and Ferromagnet / Insulator Interfaces

We report investigations of the synthesis, structure, and properties of new materials for spintronic applications integrated onto silicon substrates. Our primary focus is materials with very high, negative, intrinsic spin polarization of the density of states at the Fermi level. We have developed a new synthesis method for Fe 3 O 4 thin films through selective oxidation of Fe, resulting in smooth, low-defect density films. We have synthesized Fe4N films and shown that they preferentially oxidize to Fe 3 O 4 . When integrated into magnetic tunnel junctions consisting of Fe4N / AlOx / Fe, oxidation at the Fe4N / AlOx interface creates Fe 3 O 4 , leading to negative tunneling magnetoresistance (TMR). Oxidation of Fe in nominally symmetric CoFe / AlOx / CoFe also produces Fe 3 O 4 and negative TMR under selected oxidation conditions.

36 MATERIALS SCIENCE↗

Studies of solution-processed organic light-emitting diodes and their materials

A hitherto unexplored approach is presented in which a small molecule is used as a host to polymer guests in solution-processed OLEDs. We find that the small molecule host results in much more efficient devices than the often-used alternative polymer host when used for the guests presented. It is likely that nano- and microstructural differences between the hosts contribute to the improvements, which highlights some interesting characteristics that can help to better understand the nature of these mixtures. A number of the guests used in this study were newly synthesized benzobisoxazole-based copolymers. New organic copolymers are presented that are based on the chemical structure of benzobisoxazoles, which have been shown in the past to have good electron transporting properties. The novel concept in this publication pertains to a change in the direction of polymerization, also known as the conjugation pathway, which we show increases the emission efficiency. This work highlights a unique and useful property of organic semiconducting materials in that they can be synthesized to create the desired characteristics. Earlier work is described that kick-started in our research group the use of small molecules in solution-processed OLEDs. Originally these devices were to be used in magnetoresistance studies, but the project took a different path when the devices were more efficient than expected. The efficient use of small molecules in solution-processed OLEDs is highlighted, which at the time was not often the case. Also, the important observation of the effect of solvent choice on the resultant film is emphasized, with discussion of the likely cause of these effects. Microcavity OLEDs are introduced in which the transparent anode ITO is replaced with semi-transparent thin silver, which creates an optical cavity within the devices. The goal was to expand a previous work that created an on-chip spectrometer covering wavelengths 493 to 639 nm. In this case, a spin-coated mixed emitting layer (EML) is used, consisting of a polymer and a small molecule that both emit in the near UV and blue. The resulting combined spectra gives a wide band that can be used to create narrow microcavity emission peaks of 373 to 469 nm, depending on the device thickness (i.e. the cavity’s optical length). In the process of this effort, the mixed EML presented interesting complexities that we attempt to explain via simulation and morphology study.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal Conductivity and Thermopower near the 2D Metal-Insulator transition, Final Technical Report

STUDIES OF STRONGLY-INTERACTING 2D ELECTRON SYSTEMS – There is a great deal of current interest in the properties of systems in which the interaction between electrons (their potential energy) is large compared to their kinetic energy. We have investigated an apparent, unexpected metal-insulator transition inferred from the behavior of the temperature-dependence of the resistivity; moreover, detailed analysis of the behavior of the magnetoresistance suggests that the electrons’ effective mass diverges, supporting this scenario. Whether this is a true phase transition or crossover behavior has been strenuously debated over the past 20 years. Our measurements have now shown that the thermoelectric power of these 2D materials diverges at a finite density, providing clear evidence that this is, in fact, a phase transition to a new low-density phase which may be a precursor or a direct transition to the long sought-after electronic crystal predicted by Eugene Wigner in 1934.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NDT System for Metal Components in Concrete Structures (Final Report)

Steel reinforcements embedded within concrete can corrode and crack, leading to weakening of the structures, and existing NDT (non-destructive testing) techniques do not provide the full picture. Condition assessment is critical in evaluating these structures in order to ensure safe, long-term operation of the nuclear power plants. Improved NDT techniques are needed as the nation’s generating stations age and require action based on increasingly critical inspection data. The power industry uses eddy current test (ECT) during in-service inspections to detect and monitor defects such as cracks and corrosion in metals, particularly metal pipes. However, the detection of defects in the reinforcing steel embedded in concrete is far more challenging for numerous reasons. Primary among them is the concrete layer’s thickness, which prevents the ability to have a close proximity between sensor and metallic sample. One solution to this problem is to create a higher sensitivity technique which can inspect at depth, with good spatial resolution and excellent directional sensitivity, to isolate the metal buried deep in the concrete and characterize defects in the metal. The goal of the phase II research program was to study and develop a new reinforced concrete NDT technology based on anisotropic magnetoresistive (AMR) sensors designed specifically for ECT of steel reinforcements in concrete. The first technical objective was to demonstrate the capability of inspecting steel reinforcement structures, including metal rebar and tensioning cable at or below 6” of depth embedded in concrete. Another objective was to be able to confidently identify multiple layers of reinforcements at varying depths. In addition, the technique needed to be able to provide condition assessment of the metal, providing data on the structure and positioning of the steel members, material loss, and detection of the presence of breaks. An important part of the research and development was aimed at achieving superior performance compared to existing technology. The ability to detect corrosion breaks in unbonded multi-wire and multi-strand tendons was another important objective. The final objective that led to a successful program was to build a complete prototype portable scanning system capable of demonstrating the probe performance in the field. All of these objectives were met, which provided data for the system development work going forward. RMD worked with the engineering firm Simpson Gumpertz & Heger to develop a detailed problem definition for concrete structures and the necessary sensor specifications. In addition, we developed finite element simulation models for the eddy current based NDT system through the analysis of the electromagnetic (EM) properties of sample materials and the orientation of the transmitter, sensor array (receivers), metal, and intervening materials like concrete and air. Based on the modeling and specifications, we designed and fabricated prototype sensor modules. We then acquired and fabricated test samples to characterize and optimize the sensors. Finally, we built a complete prototype for testing on actual concrete structures. This new NDT technology has high promise for greatly improving capabilities in the inspection of steel reinforcements within concrete structures, such as rebar, liners, anchors, and prestressing cables. This method could be valuable in the maintenance of nuclear power plants, and many other structures critical to our nation’s infrastructure.

42 ENGINEERING↗

Dissipative and fast-timescale phenomena in superconductors

This project explored new effects and regimes that unfold in superconductors as they are pushed to ex treme and unprecedented conditions of electric field, power densities, vortex velocities, etc. Besides their own novelty, these phenomena yield fundamental in formation about the superconducting state and its parameters, as well as its practical limits for techno logical applications. Furthermore some of these ef fects (such as formation of phase slip processes and the acceleration of superfluid) are time dependent on time scales such as quasiparticle-phonon energy re laxation and gap relaxation. This project used fast low-duty-cycle pulsed signals to first of all access these regimes without excessive heating and secondly to observe directly in the time domain the temporal unfolding of these phenomena on nanosecond time scales. This project led to the discovery of new effects in the transport behavior in superconductors, provided new information on fundamental parameters, and helped establish intrinsic strengths and limitations of different superconducting materials for ap plications. The primary tools developed for extending the range of measurable dissipation densities and observation of short time-scale phenomena were fast pulsed-current and pulsed-voltage sources, and fast high-CM-rejection detection circuitry. This allowed conducting measurements at power densities in the 10 10 W/cm 3 range, and at E ~ 1 kV/cm and v Φ ~10 km/s. Also developed was the ability to simultaneously track current I(t) and voltage V (t) and cross correlate them with sub-nanosecond temporal resolution. A recent angle of this project was the exploration of subtle phenomena at low current densities, especially for the magnetic field orientation parallel to the plane of the films. Through modifications of the pulsed tube closed cycle cryostat, we developed methods for attaining low-noise and high temperature-stability conditions. This led to the observation of novel dimensional effects related to the mixed state and vortex matter, and to a new type of magnetoresistance oscillation.

36 MATERIALS SCIENCE↗

Future Directions in Topological States of Matter: Beyond the Single Particle Picture

Correlations between electrons have brought about some of the most celebrated discoveries in quantum materials research, including all forms of superconductivity, the fractional quantum hall effect, and giant magnetoresistance. A more recent development has been the discovery that the topological aspects of electrons are important, producing new states of matter like topological insulators, and Dirac and Weyl fermions. This conference will bring together experts from both the "correlated" and "topological" communities to explore future directions that merge both fields, including emergent physics in the flat bands of twisted bilayer systems, and new routes to quantum computation using topological superconductors and spin liquids. We hope to come away with new research questions, and new material synthesis directions, that will strongly overlap with the Basic Energy Sciences mission to support the fundamental experimental and theoretical quantum materials research.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

One Dimensional Topological Nanomaterials and Superconductivity (Final Technical Report)

The project synthesized and made transport properties of topological crystalline insulator tin telluride (SnTe) nanowires and other topological materials, such as MoTe 2 and WTe 2 . The transport properties of the nanowires were correlated with the diameter of the nanowire, in terms of the ferroelectric phase transition temperature, magnetoresistance response, and Josephson junction behaviors as a function of the nanowire diameter. The most important observation was the proximity-induced superconductivity in SnTe nanowires, which suggests time reversal symmetry breaking.

36 MATERIALS SCIENCE↗

Less Common Topological Phenomena in Bulk Materials

"Prediction and subsequent discovery of topological insulators is considered to be one of the main results in condensed matter physics in the last decades. Not surprisingly, it has received major attention of both researchers and funding agencies. This attention is well-deserved; yet, one cannot but note that nearly all this research revolves about essentially the same concept: electronic excitations with linear dispersion, covering, of course, such diverse and intriguing phenomena as topological insulator, bulk Dirac states (or Weyl, if not spin degenerate), Mayorana fermions. In this project, we will address, mainly, other topological phenomena, such as topologically nontrivial magnetic patterns (as, for instance, topological Hall and related phenomena). Specifically, we propose three interrelated trusts: (1) Time-reversal symmetry breaking nonrelativistic antiferromagnets, called altermagnets. These are materials that break Kramers degeneracy of electronic bands, despite having zero net magnetization by symmetry and being fully collinear, and not necessarily non-centrosymmetric. The corresponding band structure is very similar to the band structure in non-centrosymmetric spin-orbital materials, but materials that we propose to study are distinctly different, first and foremost in the sense that despite sharing many aspects of their electronic properties with the latter, they break the time-reversal symmetry without either spin-orbit coupling or lack of inversion symmetry. (2) Topologically nontrivial magnetic spirals. The PI has been engaged with the experimental group of Dr. Ghimire at GMU investigating Dirac materials with helical magnetism, based on stacked magnetic Kagome layers, with a generic formula of RMn6Sn6. In particular, Y Mn6Sn6 demonstrates a component of the Hall effect that is naturally interpreted in terms of a topological spin texture, as well as linear magnetoresistance. Our calculation identify Dirac states that are robust with respect to the spiral formation, and let us derive an advance mean-field model explaining the observed phase diagram. This model predicted four distinct phases, with very distinct properties, which have now been seen in neutron experiments. The same compound is known to demonstrate topological Hall effect in a particular magnetic phase, and only at elevated temperature. Based on our understanding of the phase diagram, we have worked out a phenomenological theory of a chiral (skyrmionic) response to an external magnetic field, similar to the nematic response to external strain in Fe-based superconductors, which is possible in a centrosymmetric lattice and without interplanar Dzyaloshinskii-Moriya interaction. This phenomenological theory agrees quantitatively with the experiment. It is in our plans to research other similar materials for this effect. (3) Search for 3D analogues of Fe-based superconductors. We want to investigate materials that can be viewed as 3D analogues of FeSe. Specifically, we want materials that are good metals and host antiferromagnetism, which can be suppressed by pressure and generate an s-wave superconductivity, as in Fe-based superconductors. We have in mind some candidates already. This work will proceed in close collaboration with the experimental group of Prof. Nirmal Ghimire in the same department, whose expertise lies in sample making, magnetometry and transport measurements of materials with complex magnetic structures."

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Using interfaces to: create strongly-coupled magnetic-ferroelectrics

Starting at the level of electrons and atoms our long-term goal is to rationally design complex oxide heterostructures and interface-materials with targeted emergent behaviors. This is not a matter of simply optimizing material parameters, but rather begins with understanding a mechanism to control the interplay between the diverse microscopic degrees of freedom prevalent in complex oxides in order to create targeted macroscopic phenomena and ends with the design of new material realizations. These realizations are in turn created with atomic-layer precision, structurally assessed to see that they are the intended realization, and finally their relevant properties are measured. During this program we have developed the scientific ideas necessary to apply this materials-by-design paradigm to the creation of materials offering electrical control of magnetism. At the heart of our approach lies a partnership between theory, synthesis, and characterization. These are the areas of expertise of the three co-PIs, who have worked closely together since their arrival at Cornell. During this project bold ideas on where to put the atoms to provide electrical control of magnetism were met with the latest methods of synthesis science and electron microscopy in an attempt create targeted new multiferroics. Our work applying this materials-by-design methodology to multiferroics has enjoyed multiple successes. The Co-PIs have invented new mechanisms for multiferroics, which provide strong coupling between polarization and magnetism, and reduced them to practice. Specifically, we pioneered multiferroics based on spin-phonon coupling, rotation-driven multiferroicity, and novel geometric multiferroics. Importantly, the latter two of these mechanisms enable the deterministic switching of magnetism by an applied electric field, which is key to the application of multiferroics to future device technologies. Most recently, we performed detailed theoretical analysis on a system involving the combination of magnetoelectric and colossal magnetoresistance behaviors and predict that electrical control of a metal-insulator transition is possible in appropriately strained SmBaMn2O6. The research enabled by this grant led to 63 publications in leading refereed journals including Nature, Nature Materials, Physical Review Letters, and Advanced Materials demonstrating a materials-by-design paradigm to the creation of materials offering electrical control of magnetism.

36 MATERIALS SCIENCE↗

Atomic-scale Imaging of Magnetic and Electronic Orders in Complex Oxides (Final Technical Report)

This research project aimed to expand spin‐polarized scanning tunneling microscopy (SP‐STM) imaging to complex quantum materials, initially focusing on uncovering the magnetic structure of doped Iridium‐based oxides (iridates) with subatomic precision. Chemical doping of complex oxides has led to exciting discoveries over the past few decades, such as high-temperature superconductivity and colossal magnetoresistance. However, the process of chemical doping is often accompanied by spatial inhomogeneity, characterized by nanometer-scale variations in electronic and/or magnetic properties of the material. SP-STM can in principle be used to image magnetic properties, but SP-STM has historically been applied primarily to relatively simple magnetic materials and nanostructures. The main objectives of this project included: (1) visualizing the evolution of magnetism in iridates, as a function of charge carrier doping, temperature and energy, (2) elucidating the relationship between the inhomogeneous electronic structure and magnetism at the nanoscale, and (3) searching for signatures of new magnetic phases in iridates and other quantum materials. Advanced STM and SP-STM imaging was also applied to select kagome metals and superconductors. The comprehensive experimental approach developed in this project provided a foundation to study quantum materials in which spin, charge and orbital degrees of freedom intertwine to create new states of matter.

36 MATERIALS SCIENCE↗

Topological Surface and Bulk States in Dirac Semimetal Alpha-Sn Thin Films

Supported by this DOE grant, we made significant advancements in the study and application of topological surface states (TSS) in topological Dirac semimetal (TDS) α-Sn thin films. Our key findings include: (1) the successful growth of TDS α-Sn thin films via sputtering, an industry-friendly technique, on Si and InSb substrates, marking a breakthrough over previous molecular beam epitaxy methods, (2) the demonstration of enhanced damping in adjacent NiFe thin films due to the TSS of α-Sn, (3) the first observation of a strong bilinear magneto-electric resistance (BMER) effect in TDS materials at room temperature, with responses surpassing previous results, (4) the identification of quantum oscillations in α-Sn thin films associated with the TSS, revealing critical quantum transport characteristics such as Berry phase and quantum mobility, (5) the first experimental observation of negative magnetoresistance in α-Sn, and (6) the demonstration of spinorbit torque-driven, field-free magnetization switching in an α-Sn/Ag/CoFeB trilayer, achieving efficiency levels higher than conventional heavy-metal-based structures, highlighting the essential role of TSS in enabling the switching process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fermi Surface Structure and Isotropic Stability of Fulde-Ferrell-Larkin-Ovchinnikov Phase in Layered Organic Superconductor β''-(BEDT-TTF) 2 SF 5 CH 2 CF 2 SO 3

The Fermi surface structure of a layered organic superconductor β''-(BEDT-TTF) 2 SF 5 CH 2 CF 2 SO 3 was determined by angular-dependent magnetoresistance oscillations measurements and band-structure calculations. This salt was found to have two small pockets with the same area: a deformed square hole pocket and an elliptic electron pocket. Characteristic corrugations in the field dependence of the interlayer resistance in the superconducting phase were observed at any in-plane field directions. The features were ascribed to the commensurability (CM) effect between the Josephson vortex lattice and the periodic nodal structure of the superconducting gap in the Fulde–Ferrell–Larkin–Ovchinnikov (FFLO) phase. The CM effect was observed in a similar field region for various in-plane field directions, in spite of the anisotropic nature of the Fermi surface. The results clearly showed that the FFLO phase stability is insensitive to the in-plane field directions.

36 MATERIALS SCIENCE↗

Crystal Growth and Electronic Properties of LaSbSe

The ZrSiS-type materials have gained intensive attentions. The magnetic version of the ZrSiS-type materials, LnSbTe (Ln = Lanthanide), offers great opportunities to explore new quantum states owing to the interplay between magnetism and electronic band topology. Here, we report the growth and characterization of the non-magnetic LaSbSe of this material family. We found the metallic transport, low magnetoresistance and non-compensated charge carriers with relatively low carrier density in LaSbSe. The specific heat measurement has revealed distinct Sommerfeld coefficient and Debye temperature in comparison to LaSbTe. Such addition of a new LnSbSe selenide compound could provide the alternative material choices in addition to LnSbTe telluride materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electromagnetic Radiation Effects on MgO-Based Magnetic Tunnel Junctions: A Review

Magnetic tunnel junctions (MTJs) have been widely utilized in sensitive sensors, magnetic memory, and logic gates due to their tunneling magnetoresistance. Moreover, these MTJ devices have promising potential for renewable energy generation and storage. Compared with Si-based devices, MTJs are more tolerant to electromagnetic radiation. In this review, we summarize the functionalities of MgO-based MTJ devices under different electromagnetic irradiation environments, with a focus on gamma-ray radiation. We explore the effects of these radiation exposures on the MgO tunnel barriers, magnetic layers, and interfaces to understand the origin of their tolerance. This review enhances our knowledge of the radiation tolerance of MgO-based MTJs, improves the design of these MgO-based MTJ devices with better tolerances, and provides information to minimize the risks of irradiation under various irradiation environments. This review starts with an introduction to MTJs and irradiation backgrounds, followed by the fundamental properties of MTJ materials, such as the MgO barrier and magnetic layers. Then, we review and discuss the MTJ materials and devices’ radiation tolerances under different irradiation environments, including high-energy cosmic radiation, gamma-ray radiation, and lower-energy electromagnetic radiation (X-ray, UV–vis, infrared, microwave, and radiofrequency electromagnetic radiation). In conclusion, we summarize the radiation effects based on the published literature, which might benefit material design and protection.

42 ENGINEERING↗

Effects of Interface Induced Natural Strains on Magnetic Properties of FeRh

FeRh is a unique alloy which shows temperature dependent phase transition magnetic properties. The lattice parameter (a) of this CsCl-type (B2) structure is 4.1712 Å. It undergoes a first order transition from antiferromagnetic (AFM) to ferromagnetic (FM) order at around 370K and hysteretic behavior while cooling and heating. This meta-magnetic transition of FeRh is accompanied by an isotropic expansion in the unit cell volume, which indicates strong coupling between magnetic and structural properties of FeRh. Consequently, the magnetic and transport properties, such as magnetoresistance (MR), are changed during the transition. Due to its unique thermo-magnetic behaviors, FeRh is very important for future spintronic devices. The structure could be applicable for MR devices such as memory, sensors, and many other applications. It is critical to understand how to systematically influence phase transition of FeRh from naturally applied strains. Here, we investigate magnetic properties of FeRh in different strain environments induced by the substrates with different lattice parameters. The study was performed using synchrotron radiation, temperature dependent magnetometry, and magnetic scanning probe microscopy in addition to Landau theory calculations. We found that the naturally induced strains could modulate the magnetic phase locally and globally. The presence of the segments from the nucleation of the ferromagnetic domains, with a very thin layer in the antiferromagnetic matrix and the domain growth, were observed gradually. Using the systematic phenomena, it could be used for immediate applications in the future generation of phase change random access memory (PC-RAM) devices.

36 MATERIALS SCIENCE↗

Kiloampere, Variable-Temperature, Critical-Current Measurements of High-Field Superconductors

We review variable-temperature, transport critical-current ($I_\text{c}$) measurements made on commercial superconductors over a range of critical currents from less than 0.1 A to about 1 kA. We have developed and used a number of systems to make these measurements over the last 15 years. Two exemplary variable-temperature systems with coil sample geometries will be described: a probe that is only variable-temperature and a probe that is variable-temperature and variable-strain. The most significant challenge for these measurements is temperature stability, since large amounts of heat can be generated by the flow of high current through the resistive sample fixture. Therefore, a significant portion of this review is focused on the reduction of temperature errors to less than ±0.05 K in such measurements. A key feature of our system is a pre-regulator that converts a flow of liquid helium to gas and heats the gas to a temperature close to the target sample temperature. The pre-regulator is not in close proximity to the sample and it is controlled independently of the sample temperature. This allows us to independently control the total cooling power, and thereby fine tune the sample cooling power at any sample temperature. The same general temperature-control philosophy is used in all of our variable temperature systems, but the addition of another variable, such as strain, forces compromises in design and results in some differences in operation and protocol. These aspects are analyzed to assess the extent to which the protocols for our systems might be generalized to other systems at other laboratories. Our approach to variable-temperature measurements is also placed in the general context of measurement-system design, and the perceived advantages and disadvantages of design choices are presented. To verify the accuracy of the variable-temperature measurements, we compared critical-current values obtained on a specimen immersed in liquid helium (“liquid” or $I_{\text{c}}$ $_{\text{liq}}$) at 5 K to those measured on the same specimen in flowing helium gas (“gas” or Ic gas) at the same temperature. These comparisons indicate the temperature control is effective over the superconducting wire length between the voltage taps, and this condition is valid for all types of sample investigated, including Nb-Ti, Nb 3 Sn, and MgB 2 wires. The liquid/gas comparisons are used to study the variable-temperature measurement protocol that was necessary to obtain the “correct” critical current, which was assumed to be the $I_{\text{c}}$ $_{\text{liq}}$. We also calibrated the magnetoresistance effect of resistive thermometers for temperatures from 4 K to 35 K and magnetic fields from 0 T to 16 T. This calibration reduces systematic errors in the variable-temperature data, but it does not affect the liquid/gas comparison since the same thermometers are used in both cases.

47 OTHER INSTRUMENTATION↗