Search NASA⌕ Search

SEARCH · Search NASA

Results for “MONOCRYSTALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Two-dimensional Detector for High Resolution Soft X-ray Imaging

A new two-dimensional (2D) detector for detecting soft X-ray (SX) images was developed. The detector has a scintillator plate to convert a SX image into a visible (VI) one, and a relay optics to magnify and detect the converted VI image. In advance of the fabrication of the detector, quantum efficiencies of scintillators were investigated. As a result, a Ce:LYSO single crystal on which Zr thin film was deposited was used as an image conversion plate. The spatial resolution of fabricated detector is 3.0 {mu}m, and the wavelength range which the detector has sensitivity is 30-6 nm region.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Single Crystal Diamond Beam Position Monitors with Radiofrequency Electronic Readout

Over the energy range 5{approx}30 keV a suitably contacted, thin ({approx}100 {mu}m) diamond plate can be operated in situ as a continuous monitor of X-ray beam intensity and position as the diamond absorbs only a small percentage of the incident beam. Single crystal diamond is a completely homogeneous material showing fast (ns), spatially uniform signal response and negligible (<pA) leakage currents. Due to its unsurpassed thermal conductivity, it is the only semiconductor material that can be used in intense synchrotron white beams. We report on tests made at ESRF and DESY using diamond beam position monitors of simple quadrant electrode designs with metal contacts, operated using wideband electronic readout corresponding to the RF accelerator frequency. The instrumentation for these monitors must cover a large range of operating conditions: different beam sizes, fluxes, energies and time structure corresponding to the synchrotron fill patterns. Sophisticated new RF sampling electronics can satisfy most requirements: using a modified Libera Brilliance readout system, we measured the center of gravity position of a 25 {mu}m beam at the DORIS III F4 beam line at a rate of 130 Msample/s with narrowband filtering of a few MHz bandwidth. Digitally averaging the signal further provided a spatial resolution {approx}20 nm.

43 PARTICLE ACCELERATORS↗

Site-Selective Determination of Magnetic Helices in BaTiCoFe{sub 10}O{sub 19} by Resonant Magnetic Scattering

Synchrotron radiation intensity measurements were made for single crystals of ferrimagnetic BaTiCoFe{sub 10}O{sub 19} at the BL-6C(3A) beamline of the Photon Factory. The resonant x-ray magnetic scattering (RXMS) method at the Fe K edge makes it possible to determine the magnetic crystal structure, having the magnetic helices for Fe ions in tetrahedral 4f{sub 1}, bipyramidal 2b, and octahedral 2a, 4f{sub 2} and 12k sites. Based on the information on x-ray magnetic circular dichroism (XMCD) and a resonant magnetic scattering factor f''{sub m} ( = 0.23) estimated from BaFe{sub 12}O{sub 19} at E = 7128.2 eV, the magnetic structures have been determined from an asymmetrical ratio {Delta}R (Y{sup +}-Y{sup -})/(Y{sup +}+Y{sup -}), where Y{sup +} and Y{sup -} are scattering intensities for left- and right-circular polarizations, respectively. Spin orientations were estimated in the least-squares procedure to minimize a residual factor of {Sigma}({Delta}R{sub obs}-{Delta}R{sub calc}){sup 2}. The canting angles estimated in this study are 180 deg., 19 deg., 118 deg., 180 deg. and 65 deg. for the magnetic moments of Fe ions in 4f{sub 1}, 2b, 2a, 4f{sub 2} and 12k sites, respectively.

36 MATERIALS SCIENCE↗

Extremely High Resolution Single Crystal Diffractometory for Orbital Resolution using High Energy Synchrotron Radiation at SPring-8

The investigation of accurate structure at charge density level will not only understand the function mechanism of physical property but also lead to design new functional materials. We have successfully installed large cylindrical camera at the BL02B1/SPring-8. In conceptual design, the image plate (IP) was selected as the detector, because such IP will not only detect wide range in one shot but also yield reliable data. In commissioning, the performance of this camera demonstrated to be suitable for the direct observation of d-electron system.

43 PARTICLE ACCELERATORS↗

Responsivity of Diamond X-ray Photodiodes Calibrated at NSLS

Single crystal, high purity synthetic diamond is used as photoabsorption and carrier transport medium in x-ray photodiodes. While the thermal / mechanical robustness and high x-ray transmission of diamond make such devices attractive for synchrotron instrumentation, state-of-the-art quality material and electrical interfaces further make such detectors feasible. The present work develops methodology for attaining calculable responsivity (photocurrent yield) over a wide range of photon energies (0.2 to 28 keV) to within 5% accuracy. These methods achieve linear response for up to 0.2 W absorbed x-ray power and response time as low as 1 ns. Details of contact formation / robustness and bias configuration are explored.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Laser-induced damage threshold of silicon in millisecond, nanosecond, and picosecond regimes

Millisecond, nanosecond, and picosecond laser pulse induced damage thresholds on single-crystal are investigated in this study. The thresholds of laser-induced damage on silicon are calculated theoretically for three pulse widths based on the thermal damage model. An axisymmetric mathematical model is established for the transient temperature field of the silicon. Experiments are performed to test the damage thresholds of silicon at various pulse widths. The results indicate that the damage thresholds obviously increase with the increasing of laser pulse width. Additionally, the experimental results agree well with theoretical calculations and numerical simulation results.

36 MATERIALS SCIENCE↗

A Comparative Evaluation of Elasticity in Pentaerythritol tetranitrate using Brillouin Scattering and Resonant Ultrasound Spectroscopy

Elastic tensors for organic molecular crystals vary significantly among different measurements. To understand better the origin of these differences, Brillouin scattering and resonant ultrasound spectroscopy measurements were made on the same specimen for single crystal pentaerythritol tetranitrate. The results differ significantly despite mitigation of sample-dependent contributions to errors. The frequency dependence and vibrational modes probed for both measurements are discussed in relation to the observed tensor variance.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Thermal Degradation of Single Crystal Zinc Oxide and the Growth of Nanostructures

Heat treatment of (0001) single crystal zinc oxide (ZnO) seems to degrade the surface morphology at high temperature. The degradation, however, does not suppress the growth of ZnO nanostructures on selective regions of the single crystal ZnO that have been sputtered with metallic zinc (Zn) and annealed at 800 degree sign C. On the uncoated regions, no growth occurs but the presence of pits suggests material loss from the surface. The formation of ZnO nanostructures on the selective regions could be aided by the preferential loss of oxygen as well as zinc suboxides from the uncoated regions. Indirect evidence of the role of oxygen and zinc suboxides can be inferred from the formation of nickel zinc oxide Ni{sub 0.9}Zn{sub 0.1}O and nickel oxide NiO{sub 2} when Zn is replaced by Ni and annealed under similar conditions.

36 MATERIALS SCIENCE↗

Growth and photoresponse study of PdO nanoflakes reactive-sputter deposited on SiO{sub 2}

This study prepares PdO nanostructures on a SiO{sub 2} substrate by reactive-sputter deposition and examines photoresponse characteristics of the thin films. PdO thin films deposited at 25 deg. C is composed of bowed nanoflakes standing on the SiO{sub 2} substrate, which have a single-crystalline structure after thermal anneal at 400 deg. C. The 400 deg. C-annealed nanoflake thin film has a band gap energy in the red-light range ({approx}2.06 eV), and exhibits a very sensitive photoresponse upon the UV (365 nm) illumination. The high photoresponse sensitivity of the 400 deg. C-annealed nanoflake thin film is ascribed to a lower density of recombination centers and traps due to an excellent crystallinity and a high carrier extraction efficiency due to a low electrical resistivity. A slight decrease in the photocurrent density during the initial stage of the UV illumination is attributed to adsorption of O{sub 2}{sup -} anions on the 400 deg. C-annealed nanoflakes.

36 MATERIALS SCIENCE↗

Multiple growths of epitaxial lift-off solar cells from a single InP substrate

We demonstrate multiple growths of flexible, thin-film indium tin oxide-InP Schottky-barrier solar cells on a single InP wafer via epitaxial lift-off (ELO). Layers that protect the InP parent wafer surface during the ELO process are subsequently removed by selective wet-chemical etching, with the active solar cell layers transferred to a thin, flexible plastic host substrate by cold welding at room temperature. The first- and second-growth solar cells exhibit no performance degradation under simulated Atmospheric Mass 1.5 Global (AM 1.5G) illumination, and have a power conversion efficiency of {eta}{sub p}=14.4{+-}0.4% and {eta}{sub p}=14.8{+-}0.2%, respectively. The current-voltage characteristics for the solar cells and atomic force microscope images of the substrate indicate that the parent wafer is undamaged, and is suitable for reuse after ELO and the protection-layer removal processes. X-ray photoelectron spectroscopy, reflection high-energy electron diffraction observation, and three-dimensional surface profiling show a surface that is comparable or improved to the original epiready wafer following ELO. Wafer reuse over multiple cycles suggests that high-efficiency; single-crystal thin-film solar cells may provide a practical path to low-cost solar-to-electrical energy conversion.

36 MATERIALS SCIENCE↗

Crystal Field Studies on MgGa{sub 2}O{sub 4}:Ni{sup 2+}

The energy levels scheme of octahedrally coordinated Ni{sup 2+} ion in single crystal, powder nano-single crystal, ceramics and glass-ceramics of MgGa{sub 2}O{sub 4} host matrix, has been calculated in the exchange charge model of crystal field. The parameters of the crystal field acting on the Ni{sup 2+} ion are calculated from the crystal structure data, after optimization of the geometry of the system. The energy level schemes have been calculated by diagonalization of the crystal field Hamiltonian of this system. The obtained results were compared with experimental data; a good agreement were demonstrated, which confirm the validity of the model and used method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of electron irradiation on the ferroelectric 180 deg. in-plane nanostripe domain structure in a thin film prepared from a bulk single crystal of BaTiO{sub 3} by focused ion beam

Effects of electron irradiation on the ferroelectric 180 deg. in-plane nanostripe domain structure in a thin film prepared from a bulk single crystal of BaTiO{sub 3} by focused ion beam were studied. The domain structure transformed into a characteristic 90 deg. in-plane nanostripe domain structure under intense electron irradiation. In particular, an unconventional triangular 90 deg. in-plane nanostripe domain structure was observed. Polarization analysis suggests the existence of an incomplete or half tetradomain vortex at the boundary of the triangular domain structure. Together with the help of phase-field simulations using time-dependent Ginzburg-Landau equations, it is suggested that such a domain structure is created by an anisotropic in-plane electric field, which is plausibly induced by an anisotropic interaction of the incident electron beam with the ferroelectric material.

36 MATERIALS SCIENCE↗

Three-dimensional ferroelectric domain imaging of epitaxial BiFeO{sub } thin films using angle-resolved piezoresponse force microscopy.

Here we introduce angle-resolved piezoresponse force microscopy (AR-PFM), whereby the sample is rotated by 30{sup o} increments around the surface normal vector and the in-plane PFM phase signals are collected at each angle. We obtained the AR-PFM images of BaTiO{sub 3} single crystal and cube-on-cube epitaxial (001) BiFeO{sub 3} (BFO) thin film on SrRuO{sub 3}/SrTiO{sub 3} substrate, and confirmed that the AR-PFM provides more unambiguous information on the in-plane polarization directions than the conventional PFM method. Moreover, we found eight additional in-plane polarization variants in epitaxial BFO thin films, which are formed to mitigate highly unstable charged domain boundaries.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Condensed hydrogen for thermonuclear fusion

Inertial confinement fusion (ICF) power, in either pure fusion or fission-fusion hybrid reactors, is a possible solution for future world's energy demands. Formation of uniform layers of a condensed hydrogen fuel in ICF targets has been a long standing materials physics challenge. Here, we review the progress in this field. After a brief discussion of the major ICF target designs and the basic properties of condensed hydrogens, we review both liquid and solid layering methods, physical mechanisms causing layer nonuniformity, growth of hydrogen single crystals, attempts to prepare amorphous and nanostructured hydrogens, and mechanical deformation behavior. Emphasis is given to current challenges defining future research areas in the field of condensed hydrogens for fusion energy applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Surface damages in diamond by Ar/O{sub 2} plasma and their effect on the electrical and electrochemical characteristics of boron-doped layers

Epitaxial single crystal and boron-doped diamond layers were exposed to reactive ion etching in Ar/O{sub 2} plasma (rf power of 25 W and self-bias of 100 V); and the electrical, structural, and electrochemical characteristics of the exposed surface were investigated. Angle-resolved x-ray photoemission spectroscopy (XPS) measurements revealed a nonuniform layer of amorphous carbon at the exposed surface with an average thickness of approximately 4 nm, as confirmed also by atomic force microscopy profiling of selectively etched areas. On highly boron-doped diamond, the plasma-induced damages resulted also in a nonconductive surface layer. This damaged and insulating surface layer remained resistant to graphite-etching chemicals and to rf oxygen plasma but it was removed completely in microwave hydrogen plasma at 700 deg. C. The surface characteristics after the H-plasma process followed by wet chemical oxidation were restored back to the initial state, as confirmed by XPS. Such ''recovery'' treatment had been applied to an all-diamond submicrometer electrode array initially patterned by an Ar/O{sub 2} plasma etching. The electrochemical characteristics of this electrode array were improved by more than two orders of magnitude, approaching theoretical limit for the given geometrical configuration.

36 MATERIALS SCIENCE↗

Cr-doped TiO{sub 2} (rutile): Ferromagnetism in bulk form?

Cr-doped rutile samples in powder and single crystal form have been prepared and studied with particular emphasis on their compositional, structural, and magnetic properties. Both powders and single crystals were characterized using x-ray diffractometry and vibrating sample magnetometry, while crystals were also studied using the x-ray Laue technique, scanning electron microscopy, and energy dispersive x-ray analysis. The results indicate weak ferromagnetic behavior at room temperature (RT) in Cr-doped TiO{sub 2} powders having 2 at. % Cr, while powders with higher amounts of Cr (e.g., 8 or 12 at. %) showed no evidence of ferromagnetism. Following successful floating zone crystal growth of Cr-doped rutile crystals in argon, magnetic measurements taken from the as-grown crystals revealed no indication of RT ferromagnetism over the composition range 2 to 12 at. % Cr. A solubility limit for Cr into the rutile matrix of 3 at. % Cr at RT is suggested.

36 MATERIALS SCIENCE↗

Bragg diffraction using a 100 ps 17.5 keV x-ray backlighter and the Bragg diffraction imager

A new diagnostic for measuring Bragg diffraction of petawatt-generated high-energy x rays off a laser-compressed crystal was designed and tested successfully at the Omega EP laser facility on static Mo and Ta (111) oriented single crystal samples using a 17.5 keV Mo K{alpha} backlighter. The Bragg diffraction imager consists of a heavily shielded enclosure and a precisely positioned beam block attached to the enclosure by an aluminum arm. Fuji image plates are used as the x-ray detectors. The diffraction from Mo and Ta (222) crystal planes was clearly detected with a high signal-to-noise. This technique will be applied to shock- and quasi-isentropically loaded single crystals on the Omega EP laser.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Heteroepitaxy of single-crystal LaLuO{sub 3} on GaAs(111)A by atomic layer deposition

We demonstrate that LaLuO{sub 3} films can be grown epitaxially on sulfur-passivated GaAs(111)A substrates by atomic layer deposition (ALD). Transmission electron microscopy and x-ray diffraction analyses reveal that the oxide film exhibits a cubic structure with a lattice mismatch of -3.8% relative to GaAs. The epitaxial layer has a high degree of crystalline perfection and is relaxed. Electrical characterizations performed on this structure show interfaces with a low interface state density of {approx}7x10{sup 11} cm{sup -2} eV{sup -1}. The measured dielectric constant is around 30, which is close to its bulk crystalline value. In contrast, ALD LaLuO{sub 3} is polycrystalline on GaAs(100) and amorphous on Si(111).

36 MATERIALS SCIENCE↗