Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nuclear structure data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Small Nuclear Reactors for Maritime Ports

Maritime ports are entering a period of sharply rising electricity demand as operations are electrified, shore power adoption grows, and energy-intensive industries expand near ports. This report evaluates the feasibility of small nuclear reactors at U.S. ports, which could offer stable baseload power and reduced dependence on regional grids. The report describes the current state of advanced reactor technologies and other factors important for future deployment such as safety and operations, siting requirements, regulatory environments and policy, and other co-benefit considerations. A structured evaluation across a diverse group of U.S. ports highlights the wide variation in feasibility. Fifteen ports were analyzed through port interviews and data collection to assess the port-specific conditions that most impact advanced reactor deployment. The analysis found that the most feasible ports for deployment have favorable geotechnical stability, supportive regulatory environments, and substantial energy loads in a grid-constrained environment. Additionally, an initial reactor size matching was done for the ports based on their reported energy consumption across different modes of operation. However, further analysis and detailed data will be required in the future to determine the optimal reactor-port matching. The economic viability to adopt this technology will be dictated by competitive cost of nuclear-generated electricity compared to other alternatives. Overall, small nuclear reactors present a promising but highly site-dependent pathway for ports seeking resilient, high-capacity energy solutions that support future energy demands. This report identifies key areas for future research and highlights ports that warrant further evaluation to assess the viability of small nuclear reactor implementation. By establishing these priorities, the analysis provides support for the development of informed strategies for potential advanced nuclear technology deployment. The inclusion of ports in this report does not imply their endorsement of nuclear energy generation, and the authors are grateful for the information, expertise, and perspectives they contributed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Assessment of current atomic scale modelling methods for the investigation of nuclear fuels under irradiation: Example of uranium dioxide

Multiscale approaches are developed to build more physically based kinetic and mechanical mesoscale models to enhance the predictive capability of fuel performance codes and increase the efficiency of the development of the safer and more innovative nuclear materials needed in the future. Atomic scale methods, and in particular electronic structure and empirical potential methods, form the basis of this multiscale approach. It is therefore essential to know the accuracy of the results computed at this scale if we want to feed them into higher scale models. We focus here on the assessment of the description of interatomic interactions in uranium dioxide using on the one hand electronic structure methods, in particular in the density functional theory (DFT) framework and on the other hand empirical potential methods. These two types of methods are complementary, the former enabling to get results from a minimal amount of input data and further insight into the electronic and magnetic properties, while the latter are irreplaceable for studies where a large number of atoms needs to be considered. We consider basic properties as well as specific ones, which are important for the description of nuclear fuel under irradiation. These are especially energies, which are the main data passed to higher scale models. We limit ourselves to uranium dioxide.

multiscale modeling↗

Guest Editorial for Nondestructive Testing and Evaluation (NDT&E) Special Section

Nondestructive testing and evaluation (NDT&E) are interdisciplinary fields that require a significant amount of interconnection between fundamental physics, measurement techniques, data processing, decision making, and reporting to have a significant impact on industry. NDT&E practitioners are challenged to keep up with the fast-paced evolution of materials, structures, processing, and manufacturing technologies. The development of engineered materials, complex structures and composites, and novel forming techniques require NDT&E to rapidly evolve to meet the needs of industry.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dynamic intramolecular regulation of the histone chaperone nucleoplasmin controls histone binding and release

Here, nucleoplasmin (Npm) is a highly conserved histone chaperone responsible for the maternal storage and zygotic release of histones H2A/H2B. Npm contains a pentameric N-terminal core domain and an intrinsically disordered C-terminal tail domain. Though intrinsically disordered regions are common among histone chaperones, their roles in histone binding and chaperoning remain unclear. Using an NMR-based approach, here we demonstrate that the Xenopus laevis Npm tail domain controls the binding of histones at its largest acidic stretch (A2) via direct competition with both the C-terminal basic stretch and basic nuclear localization signal. NMR and small-angle X-ray scattering (SAXS) structural analyses allowed us to construct models of both the tail domain and the pentameric complex. Functional analyses demonstrate that these competitive intramolecular interactions negatively regulate Npm histone chaperone activity in vitro. Together these data establish a potentially generalizable mechanism of histone chaperone regulation via dynamic and specific intramolecular shielding of histone interaction sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The nuclear charge radius of 13 C

The size is a key property of a nucleus. Accurate nuclear radii are extracted from elastic electron scattering, laser spectroscopy, and muonic atom spectroscopy. The results are not always compatible, as the proton-radius puzzle has shown most dramatically. Beyond helium, precision data from muonic and electronic sources are scarce in the light-mass region. The stable isotopes of carbon are an exception. We present a laser spectroscopic measurement of the root-mean-square (rms) charge radius of 13 C and compare this with ab initio nuclear structure calculations. Measuring all hyperfine components of the 2 3 S → 2 3 P fine-structure triplet in 13 C 4+ ions referenced to a frequency comb allows us to determine its center-of-gravity with accuracy better than 2 MHz although second-order hyperfine-structure effects shift individual lines by several GHz. We improved the uncertainty of R c ( 13 C) determined with electrons by a factor of 6 and found a 3σ discrepancy with the muonic atom result of similar accuracy.

Müller, Patrick [Technical Univ. of Darmstadt (Ger↗

Ion permeation in potassium ion channels

The study of ion channels dates back to the 1950s and the groundbreaking electrophysiology work of Hodgin and Huxley, who used giant squid axons to probe how action potentials in neurons were initiated and propagated. More recently, several experiments using different structural biology techniques and approaches have been conducted to try to understand how potassium ions permeate through the selectivity filter of potassium ion channels. Two mechanisms of permeation have been proposed, and each of the two mechanisms is supported by different experiments. The key structural biology experiments conducted so far to try to understand how ion permeation takes place in potassium ion channels are reviewed and discussed. Protein crystallo­graphy has made, and continues to make, key contributions in this field, often through the use of anomalous scattering. Other structural biology techniques used to study the contents of the selectivity filter include solid-state nuclear magnetic resonance and two-dimensional infrared spectroscopy, both of which make clever use of isotopic labeling techniques, while molecular-dynamics simulations of ion flow through the selectivity filter have been enabled by the growing number of potassium ion channel structures deposited in the Protein Data Bank.

59 BASIC BIOLOGICAL SCIENCES↗

GraphSAGE-Sparse v.0.2.0

SAND2022-12899 O GraphSAGE-Sparse is an implementation of the GraphSAGE Graph Neural Network that adds support for sparse data structures, as well as improved functionality through the Tensorflow 2 functional API. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

SciDAC↗

Observation of Antiproton Annihilation at Rest in LArIAT

Antiproton annihilation at-rest can provide a unique probe into the intra-nuclear structure of nuclei. This process was first observed in the 1950’s using photographic emulsion and has since been observed and studied on a variety of nuclei. We present here the first observation and reconstruction of antiproton annihilation at-rest interactions on argon nuclei using data from the LArIAT experiment, a liquid argon time projection chamber (LArTPC). LArIAT was exposed to a charged particle test-beam at Fermilab from 2015-2017. Antiprotons tagged using LArIAT’s beamline instrumentation were reconstructed in the LArTPC, and the multiplicities of final-state particles emerging from the identified annihilation at-rest vertex were measured. These results will inform searches for neutron-antineutron oscillation events in the future LArTPCs like DUNE due to their similar topological signature.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

CESAR5.3: An Industrial Tool for Nuclear Fuel and Waste Characterization with Associated Qualification - 12067

CEA and AREVA-NC have developed and used a depletion code named CESAR for 30 years. This user-friendly industrial tool provides fast characterizations for all types of nuclear fuel (PWR / UOX or MOX or reprocess Uranium, BWR / UOX or MOX, MTR and SFR) and the wastes associated. CESAR can evaluate 100 heavy nuclides, 200 fission products and 150 activation products (with Helium and Tritium formation). It can also characterize the structural material of the fuel (Zircalloy, stainless steel, M5 alloy). CESAR provides depletion calculations for any reactor irradiation history and from 3 months to 1 million years of cooling time. CESAR5.3 is based on the latest calculation schemes recommended by the CEA and on an international nuclear data base (JEFF-3.1.1). It is constantly checked against the CEA referenced and qualified depletion code DARWIN. CESAR incorporates the CEA qualification based on the dissolution analyses of fuel rod samples and the 'La Hague' reprocessing plant feedback experience. AREVA-NC uses CESAR intensively at 'La Hague' plant, not only for prospective studies but also for characterizations at different industrial facilities all along the reprocessing process and waste conditioning (near 150 000 calculations per year). CESAR is the reference code for AREVA-NC. CESAR is used directly or indirectly with other software, data bank or special equipment in many parts of the La Hague plants. The great flexibility of CESAR has rapidly interested other projects. CESAR became a 'tool' directly integrated in some other softwares. Finally, coupled with a Graphical User Interface, it can be easily used independently, responding to many needs for prospective studies as a support for nuclear facilities or transport. An English version is available. For the principal isotopes of U and Pu, CESAR5 benefits from the CEA experimental validation for the PWR UOX fuels, up to a burnup of 60 GWd/t and for PWR MOX fuels, up to 45 GWd/t. CESAR version 5.3 uses the CEA reference calculation codes for neutron physics with the JEFF-3.1.1 nuclear data set. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Uranium and cesium diffusion in fuel cladding of electrogenerating channel

The results of reactor tests of a carbonitride fuel in a single-crystal cladding from a molybdenum-based alloy can be used in substantiating the operational reliability of fuels in developing a project of a megawatt space nuclear power plant. The results of experimental studies of uranium and cesium penetration into the single-crystal cladding of fuel elements with a carbonitride fuel are interpreted. Those fuel elements passed nuclear power tests in the Ya-82 pilot plant for 8300 h at a temperature of about 1500°C. It is shown that the diffusion coefficients for uranium diffusion into the cladding are virtually coincident with the diffusion coefficients measured earlier for uranium diffusion into polycrystalline molybdenum. It is found that the penetration of uranium into the cladding is likely to occur only in the case of a direct contact between the cladding and fuel. The experimentally observed nonmonotonic uranium-concentration profiles are explained in terms of predominant uranium diffusion along grain boundaries. It is shown that a substantially nonmonotonic behavior observed in our experiment for the uranium-concentration profile may be explained by the presence of a polycrystalline structure of the cladding in the surface region from its inner side. The diffusion coefficient is estimated for the grain-boundary diffusion of uranium. The diffusion coefficients for cesium are estimated on the basis of experimental data obtained in the present study.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Probabilities for the emission of light particles and their energy and angular distributions for true quaternary nuclear fission

On the basis of quantum-mechanical fission theory, the features of true quaternary nuclear fission are studied by treating this fission process as a sequence of three processes following one another in the course of time. The first two processes are the escape of the first and then the second of the two light particles emitted from the neck of a fissioning nucleus because of a nonadiabatic character of the collective deformation motion of this nucleus. Finally, the third process is the separation of the fissioning nucleus into two rather heavy fission fragments. The differences that arise in the emission probabilities and in the angular and energy distributions upon going over from the first emitted to the second emitted prescission third and fourth particles are analyzed by invoking experimental data on the spontaneous and thermalneutron-induced fission of nuclei, and it is shown that these differences are caused by the changes both in the geometric configuration of the fissioning nucleus and in the shell structure of its neck after the first prescission particle is emitted from it.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Study of the gel films of Acetobacter Xylinum cellulose and its modified samples by {sup 1}H NMR cryoporometry and small-angle X-ray scattering

Gel films of Acetobacter Xylinum cellulose and its modified samples have been investigated by 1H nuclear magnetic resonance (NMR) cryoporometry and small-angle X-ray scattering. The joint use of these two methods made it possible to characterize the sizes of aqueous pores in gel films and estimate the sizes of structural inhomogeneities before and after the sorption of polyvinylpyrrolidone and Se{sub 0} nanoparticles (stabilized by polyvinylpyrrolidone) into the films. According to small-angle X-ray scattering data, the sizes of inhomogeneities in a gel film change only slightly upon the sorption of polyvinylpyrrolidone and nanoparticles. The impregnated material is sorbed into water-filled cavities that are present in the gel film. {sup 1}H NMR cryoporometry allowed us to reveal the details of changes in the sizes of small aqueous pores during modifications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large-scale shell-model calculations for even-odd {sup 61-65}Fe isotopes

Large-scale shell-model calculations have been performed to calculate the negative-parity states of even-odd {sup 61-65}Fe isotopes. The results are compared with the recent experimental data reported at Legnaro National Laboratories and also with earlier calculations with fpg interaction in a truncated configuration space. It is observed that negative parity states of {sup 61}Fe can be well reproduced with GXPF1A interaction in full fp space without truncation. For {sup 63}Fe the correct ordering of levels is not reproduced. The structure of the wave function for the ground state and first excited state suggests that the ordering of the single-particle energy levels gets modified due to monopole correction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Specimen sizing and remaining life sample calculations for high temperature reactor material surveillance

Advanced high-temperature nuclear reactors rely on structural components that will operate for decades under combined mechanical, thermal, and environmental loading. Materials surveillance programs are a promising strategy for managing the resulting uncertainty in long-term structural integrity by monitoring degradation in service using passively actuated mechanical test articles. Previous reports have developed a simplified, spreadsheetimplementable framework for sizing these test articles and for inferring accumulated creep damage and remaining life from ex-situ test data. This report advances that work toward practical deployment by providing a sample-problem book: a collection of worked, end-toend examples in which the ASME Section III, Division 5 design analysis of a representative high-temperature reactor component is carried through to a sized surveillance article, verified with detailed finite-element analysis, and concluded with a remaining-life assessment based on an assumed ex-situ creep-rate measurement on the retrieved specimen. The report also summarizes ongoing ANL engagement with ASTM Committee E10 on Nuclear Technology and Applications toward drafting a standard covering surveillance procedures for advanced reactors.

Barua, Bipul (ORCID:0000000247184113)↗

Synthesis and ion-irradiation tolerance of the Dy2TiO5 polymorphs

In developing improvements in nuclear fuels, work has been conducted in replacing boron with lanthanides to act as neutron absorbent materials. To further this development for the first time the three major polymorphs of Dy2TiO5 have been fabricated as bulk, single-phase materials in a systematic study. Crystal structure refinement has been carried out from powder x-ray diffraction data, with further structural detail attained via electron diffraction. A cubic phase, defect-pyrochlore, Fd-3m space group, was found with cell parameter a = 10.2996 (1) angstrom and oxygen x48f positional parameter = 0.331 (1). Dy2TiO5 was also fabricated as a bulk, single-phase compound with hexagonal symmetry, P6(3)/mmc space group, with cell parameters a = b = 3.6307(2), c = 11.8963(8) angstrom. The radiation response for each of the polymorphs has been investigated in-situ via 1 MeV Kr - ion-irradiation and transmission electron microscopy characterisation at the IVEM-TANDEM facility, Argonne National Laboratory. Critical temperatures, T-c, for maintaining crystallinity during irradiation were determined and showed Dy2TiO5 with either orthorhombic or cubic symmetry to perform the best, with the lowest T-c values of 711 and 761 K respectively when compared with the hexagonal form. These relatively low T-c values may be attributed to different characteristics for each phase; high anti-site defect formation energy for the orthorhombic symmetry, and the ability to accommodate disorder for the cubic symmetry.

Burnable poison↗

Development of the Technical Basis of a Unified Viscoplastic Model of 316H Stainless Steel for Incorporation into ASME Division 5

This report describes the development of a unified viscoplastic model describing the deformation of 316 stainless steel. The model was developed for incorporation into Section III, Division 5 of the ASME Boiler and Pressure Vessel Code covering the design and fabrication of Class A high temperature nuclear reactor components. The current version of the Code does not provide reference inelastic models, leaving the responsibility of defining an adequate model up to either the plant owner or designer. This approach represents a substantial barrier to using the ASME design by inelastic analysis methods. As historical practice demonstrates these methods produce much more efficient designs, compared to the design by elastic analysis methods, eliminating this barrier could result in safer, more effective, and more efficient structural designs thereby lowering the cost of future advanced reactors. This report summarizes the process of gathering experimental data, calibrating the candidate inelastic model against that data, and validating the model. The report also summarizes work on a new method of calculating the sensitivities of history dependent nonlinear constitutive models that was used to calibrate the 316H model using gradient-based optimization.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Solution NMR structure of the V27A drug resistant mutant of influenza A M2 channel

Research highlights: {yields} This paper reports the structure of the V27A drug resistant mutant of the M2 channel of influenza A virus. {yields} High quality NMR data allowed a better-defined structure for the C-terminal region of the M2 channel. {yields} Using the structure, we propose a proton transfer pathway during M2 proton conduction. {yields} Structural comparison between the wildtype, V27A and S31N variants allowed an in-depth analysis of possible modes of drug resistance. {yields} Distinct feature of the V27A channel pore also provides an explanation for its faster rate of proton conduction. -- Abstract: The M2 protein of influenza A virus forms a proton-selective channel that is required for viral replication. It is the target of the anti-influenza drugs, amantadine and rimantadine. Widespread drug resistant mutants, however, has greatly compromised the effectiveness of these drugs. Here, we report the solution NMR structure of the highly pathogenic, drug resistant mutant V27A. The structure reveals subtle structural differences from wildtype that maybe linked to drug resistance. The V27A mutation significantly decreases hydrophobic packing between the N-terminal ends of the transmembrane helices, which explains the looser, more dynamic tetrameric assembly. The weakened channel assembly can resist drug binding either by destabilizing the rimantadine-binding pocket at Asp44, in the case of the allosteric inhibition model, or by reducing hydrophobic contacts with amantadine in the pore, in the case of the pore-blocking model. Moreover, the V27A structure shows a substantially increased channel opening at the N-terminal end, which may explain the faster proton conduction observed for this mutant. Furthermore, due to the high quality NMR data recorded for the V27A mutant, we were able to determine the structured region connecting the channel domain to the C-terminal amphipathic helices that was not determined in the wildtype structure. The new structural data show that the amphipathic helices are packed much more closely to the channel domain and provide new insights into the proton transfer pathway.

60 APPLIED LIFE SCIENCES↗

Few Group Collapsing of Covariance Matrix Data Based on a Conservation Principle

A new algorithm for a rigorous collapsing of covariance data is proposed, derived, implemented, and tested. The method is based on a conservation principle that allows the uncertainty calculated in a fine group energy structure for a specific integral parameter, using as weights the associated sensitivity coefficients, to be preserved at a broad energy group structure.

99 GENERAL AND MISCELLANEOUS↗