Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase Field Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

The Impact of the 8–10 March 2012 Geomagnetic Storm on Inner Zone Protons as Measured by Van Allen Probes

The Relativistic Electron Proton Telescope (REPT) instrument on the Van Allen Probes observed a double-peaked inner zone proton population throughout the 7 year lifetime of the mission. M. Hudson et al. (2023) showed that a strong SEP event accompanied by a CME-shock in early March 2012 provided the Solar Energetic Proton (SEP) source for the higher L trapped proton population, which then diffused radially inward to be observed by REPT at L = 2. The study followed trajectories of SEP protons launched isotropically from a sphere at 7 Re for 2.5 hr in fields calculated by the LFM-RCM global MHD model, which includes electric fields needed to model the transport and trapping of the protons by the shock, and then a radial diffusion simulation was run for 2 years using the result from the test-particle simulation as the initial condition. The simulation result was compared with REPT measurement in November 2013 and showed reasonable agreement. However, the simulation overestimated the Phase Space Density by a factor of four due to lack of field line curvature scattering during the storm in the model. In this study, a test-particle simulation is performed for 2 days following the injection and trapping of protons in March 2012 using TS05 fields to simulate the field line curvature scattering of the trapped SEP due to the buildup of the ring current during the geomagnetic storm. The resulting sample distribution was then weighted using the flux at the end of the two-hour MHD-test particle simulation. A radial diffusion simulation is then run using the initial profile that included the loss effect, with improved comparison with REPT measurements after 2 years.

79 ASTRONOMY AND ASTROPHYSICS↗

Reheating predictions in gravity theories with derivative coupling

We investigate the inflationary predictions of a simple Horndeski theory where the inflaton scalar field has a non-minimal derivative coupling (NMDC) to the Einstein tensor. The NMDC is very motivated for the construction of successful models for inflation, nevertheless its inflationary predictions are not observationally distinct. We show that it is possible to probe the effects of the NMDC on the CMB observables by taking into account both the dynamics of the inflationary slow-roll phase and the subsequent reheating. We perform a comparative study between representative inflationary models with canonical fields minimally coupled to gravity and models with NMDC. We find that the inflation models with dominant NMDC generically predict a higher reheating temperature and a different range for the tilt of the scalar perturbation spectrum n {sub s} and scalar-to-tensor ratio r , potentially testable by current and future CMB experiments.

79 ASTRONOMY AND ASTROPHYSICS↗

Phase diagram of the disordered Bose-Hubbard model

We establish the phase diagram of the disordered three-dimensional Bose-Hubbard model at unity filling which has been controversial for many years. The theorem of inclusions, proven by Pollet et al. [Phys. Rev. Lett. 103, 140402 (2009)] states that the Bose-glass phase always intervenes between the Mott insulating and superfluid phases. Here, we note that assumptions on which the theorem is based exclude phase transitions between gapped (Mott insulator) and gapless phases (Bose glass). The apparent paradox is resolved through a unique mechanism: such transitions have to be of the Griffiths type when the vanishing of the gap at the critical point is due to a zero concentration of rare regions where extreme fluctuations of disorder mimic a regular gapless system. An exactly solvable random transverse field Ising model in one dimension is used to illustrate the point. A highly nontrivial overall shape of the phase diagram is revealed with the worm algorithm. The phase diagram features a long superfluid finger at strong disorder and on-site interaction. Moreover, bosonic superfluidity is extremely robust against disorder in a broad range of interaction parameters; it persists in random potentials nearly 50 ({exclamation_point}) times larger than the particle half-bandwidth. Finally, we comment on the feasibility of obtaining this phase diagram in cold-atom experiments, which work with trapped systems at finite temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anomalies of coset non-invertible symmetries

Anomalies of global symmetries provide important information on the quantum dynamics. We show the dynamical constraints can be organized into three classes: genuine anomalies, fractional topological responses, and integer responses that can be realized in symmetry-protected topological (SPT) phases. Coset symmetry can be present in many physical systems including quantum spin liquids, and the coset symmetry can be a non-invertible symmetry. We introduce twists in coset symmetries, which modify the fusion rules and the generalized Frobenius-Schur indicators. We call such coset symmetries twisted coset symmetries, and they are labeled by the quadruple (G, K, ω D+1 , α D ) in D spacetime dimensions where G is a group and K ⊂ G is a discrete subgroup, ω D+1 is a (D + 1)-cocycle for group G, and α D is a D-cochain for group K. We present several examples with twisted coset symmetries using lattice models and field theory, including both gapped and gapless systems (such as gapless symmetry-protected topological phases). We investigate the anomalies of general twisted coset symmetry, which presents obstructions to realizing the coset symmetry in (gapped) symmetry-protected topological phases. We show that finite coset symmetry G/K becomes anomalous when G cannot be expressed as the bicrossed product G = H ⋈ K , and such anomalous coset symmetry leads to symmetry-enforced gaplessness in generic spacetime dimensions. We illustrate examples of anomalous coset symmetries with A 5 / \Z 2 symmetry, with realizations in lattice models.

Hsin, Po-Shen [King’s College London (United Kingd↗

Microstructure Validation of Graph Theory Model-Derived Cooling Rates in the Wire Arc Additive Manufacturing of ER70S-6 Steel

Wire arc additive manufacturing (WAAM) enables high-rate fabrication of large metallic components, but spatial variations in thermal history can lead to microstructural heterogeneity that requires efficient process models to evaluate. This study evaluates whether cooling rates extracted from a graph theory model (GTM)-based thermal simulation are consistent with the microstructural evolution observed in an ER70S-6 WAAM wall. Thermal histories from the model were analyzed at selected build heights, and cooling rates were extracted from the final thermal excursion through the austenite phase field. Microstructures at corresponding locations were characterized using electron backscatter diffraction (EBSD) to quantify grain size distributions, and pearlite interlamellar spacing was used as an additional indicator of cooling behavior. The modeled cooling rates were highest near the substrate and generally decreased with build height, consistent with the observed reduction in the fine grain fraction and the progressive shift in the grain size distribution as build height increased. Pearlite spacing trends also supported the modeled cooling rate variation. These results indicate that GTM-derived thermal histories can be post-processed into metallurgically meaningful cooling rate estimates for WAAM steel builds and linked to dataset specific empirical grain size distribution relationships for process–thermal history–microstructure assessment.

36 MATERIALS SCIENCE↗

Inelastic Scattering of a Photon by a Quantum Phase Slip

Spontaneous decay of a single photon is a notoriously inefficient process in nature irrespective of the frequency range. We report that a quantum phase-slip fluctuation in high-impedance superconducting waveguides can split a single incident microwave photon into a large number of lower-energy photons with a near unit probability. The underlying inelastic photon-photon interaction has no analogs in non-linear optics. Instead, the measured decay rates are explained without adjustable parameters in the framework of a new model of a quantum impurity in a Luttinger liquid. Our result connects circuit quantum electrodynamics to critical phenomena in two-dimensional boundary quantum field theories, important in the physics of strongly-correlated systems. Here, the photon lifetime data represents a rare example of verified and useful quantum many-body simulation.

1-dimensional systems↗

Information content of nonautonomous free fields in curved space-time

We show that it is possible to quantify the information content of a nonautonomous free field state in curved space-time. A covariance matrix is defined and it is shown that, for symmetric Gaussian field states, the matrix is connected to the entropy of the state. This connection is maintained throughout a quadratic nonautonomous (including possible phase transitions) evolution. Although particle-antiparticle correlations are dynamically generated, the evolution is isoentropic. If the current standard cosmological model for the inflationary period is correct, in absence of decoherence such correlations will be preserved, and could potentially lead to observable effects, allowing for a test of the model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Theory of In-Cloud Activation of Aerosols and Microphysical Quasi-Equilibrium in a Deep Updraft

The microphysical quasi-equilibrium in an ascending adiabatic parcel is elucidated by an analytical theory in 0D with drastic simplifications. The theory predicts how in-cloud activation is most likely to be triggered by the onset of precipitation during sufficient ascent, with the ascent only needing to approach almost twice the cloud-base updraft speed aloft. The precipitation and cloud condensate mass fields are coupled in a closed system in a simplified version of the model. The initial state of no precipitation is unstable with respect to a perturbation. In the 2D phase space of both mass fields, there is a neutral line. Unstable growth of precipitation mass drives the system to cross the line into a regime of stability. An attractor is then approached consisting of precipitation mass balanced by accretion of cloud mass and fallout. The cloud-particle number concentration also approaches a stable equilibrium governed by the balance between in-cloud activation aloft from the inexorably increasing supersaturation during vertical acceleration and accretion of cloud droplets by precipitation. Dimensionless numbers characterizing the microphysical equilibria and their stability are derived mathematically, including a condensation–precipitation efficiency and an in-cloud activation efficiency. The theory explains common observations of the orders of magnitude of liquid water content in convective and stratiform clouds. Finally, sensitivity tests of the numerically integrated theoretical equations are documented with respect to variations in cloud condensation nucleus (CCN) aerosols and updraft speed. In conclusion, it is shown that this theory of in-cloud activation, with an increasing supersaturation during ascent, applies to both ice-only and liquid-only cloud.

54 ENVIRONMENTAL SCIENCES↗

Correlation and nonlocality measures as indicators of quantum phase transitions in several critical systems

We have investigated the quantum phase transitions in the ground states of several critical systems, including transverse field Ising and XY models as well as XY with multiple spin interactions, XXZ and the collective system Lipkin-Meshkov-Glick models, by using different quantumness measures, such as entanglement of formation, quantum discord, as well as its classical counterpart, measurement-induced disturbance and the Clauser-Horne-Shimony-Holt-Bell function. Measurement-induced disturbance is found to detect the first and second order phase transitions present in these critical systems, while, surprisingly, it is found to fail to signal the infinite-order phase transition present in the XXZ model. Remarkably, the Clauser-Horne-Shimony-Holt-Bell function is found to detect all the phase transitions, even when quantum and classical correlations are zero for the relevant ground state. - Highlights: Black-Right-Pointing-Pointer The ability of correlation measures to detect quantum phase transitions has been studied. Black-Right-Pointing-Pointer Measurement induced disturbance fails to detect the infinite order phase transition. Black-Right-Pointing-Pointer CHSH-Bell function detects all phase transitions even when the bipartite density matrix is uncorrelated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Exact calculation of entanglement in a 19-site two-dimensional spin system

Using the trace minimization algorithm, we carried out an exact calculation of entanglement in a 19-site two-dimensional transverse Ising model. This model consists of a set of localized spin-(1/2) particles in a two-dimensional triangular lattice coupled through exchange interaction J and subject to an external magnetic field of strength h. We demonstrate, for such a class of two-dimensional magnetic systems, that entanglement can be controlled and tuned by varying the parameter {lambda}=h/J in the Hamiltonian and by introducing impurities into the systems. Examining the derivative of the concurrence as a function of {lambda} shows that the system exhibits a quantum phase transition at about {lambda}{sub c}=3.01, a transition induced by quantum fluctuations at the absolute zero of temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Semivolatile POA and parameterized total combustion SOA in CMAQv5.2: impacts on source strength and partitioning

Abstract. Mounting evidence from field and laboratory observations coupled with atmospheric model analyses shows that primary combustion emissions of organic compounds dynamically partition between the vapor and particulate phases, especially as near-source emissions dilute and cool to ambient conditions. The most recent version of the Community Multiscale Air Quality model version 5.2 (CMAQv5.2) accounts for the semivolatile partitioning and gas-phase aging of these primary organic aerosol (POA) compounds consistent with experimentally derived parameterizations. We also include a new surrogate species, potential secondary organic aerosol from combustion emissions (pcSOA), which provides a representation of the secondary organic aerosol (SOA) from anthropogenic combustion sources that could be missing from current chemical transport model predictions. The reasons for this missing mass likely include the following: (1) unspeciated semivolatile and intermediate volatility organic compound (SVOC and IVOC, respectively) emissions missing from current inventories, (2) multigenerational aging of organic vapor products from known SOA precursors (e.g., toluene, alkanes), (3) underestimation of SOA yields due to vapor wall losses in smog chamber experiments, and (4) reversible organic compounds–water interactions and/or aqueous-phase processing of known organic vapor emissions. CMAQ predicts the spatially averaged contribution of pcSOA to OA surface concentrations in the continental United States to be 38.6 and 23.6 % in the 2011 winter and summer, respectively. Whereas many past modeling studies focused on a particular measurement campaign, season, location, or model configuration, we endeavor to evaluate the model and important uncertain parameters with a comprehensive set of United States-based model runs using multiple horizontal scales (4 and 12 km), gas-phase chemical mechanisms, and seasons and years. The model with representation of semivolatile POA improves predictions of hourly OA observations over the traditional nonvolatile model at sites during field campaigns in southern California (CalNex, May–June 2010), northern California (CARES, June 2010), the southeast US (SOAS, June 2013; SEARCH, January and July, 2011). Model improvements manifest better correlations (e.g., the correlation coefficient at Pasadena at night increases from 0.38 to 0.62) and reductions in underprediction during the photochemically active afternoon period (e.g., bias at Pasadena from −5.62 to −2.42 µg m−3). Daily averaged predictions of observations at routine-monitoring networks from simulations over the continental US (CONUS) in 2011 show modest improvement during winter, with mean biases reducing from 1.14 to 0.73 µg m−3, but less change in the summer when the decreases from POA evaporation were similar to the magnitude of added SOA mass. Because the model-performance improvement realized by including the relatively simple pcSOA approach is similar to that of more-complicated parameterizations of OA formation and aging, we recommend caution when applying these more-complicated approaches as they currently rely on numerous uncertain parameters. The pcSOA parameters optimized for performance at the southern and northern California sites lead to higher OA formation than is observed in the CONUS evaluation. This may be due to any of the following: variations in real pcSOA in different regions or time periods, too-high concentrations of other OA sources in the model that are important over the larger domain, or other model issues such as loss processes. This discrepancy is likely regionally and temporally dependent and driven by interferences from factors like varying emissions and chemical regimes.

54 ENVIRONMENTAL SCIENCES↗

{rho} meson decay in 2+1 flavor lattice QCD

We perform a lattice QCD study of the {rho} meson decay from the N{sub f}=2+1 full QCD configurations generated with a renormalization group improved gauge action and a nonperturbatively O(a)-improved Wilson fermion action. The resonance parameters, the effective {rho}{yields}{pi}{pi} coupling constant and the resonance mass, are estimated from the P-wave scattering phase shift for the isospin I=1 two-pion system. The finite size formulas are employed to calculate the phase shift from the energy on the lattice. Our calculations are carried out at two quark masses, m{sub {pi}=}410 MeV (m{sub {pi}/}m{sub {rho}=}0.46) and m{sub {pi}=}300 MeV (m{sub {pi}/}m{sub {rho}=}0.35), on a 32{sup 3}x64 (La=2.9 fm) lattice at the lattice spacing a=0.091 fm. We compare our results at these two quark masses with those given in the previous works using N{sub f}=2 full QCD configurations and the experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Data-Efficient Methods for Determining Flory–Huggins χ Parameters in Multicomponent Polymer Formulations

Polymer formulations are essential in diverse applications including personal care products, coatings, paints, adhesives, and plastic materials. Designing these formulations requires navigating large, complex design spaces, where phase and self-assembly behavior critically impact performance. The Flory–Huggins χ parameter, which quantifies segmental miscibility, is widely used to parametrize the excess free energy of mixing in formulation models. In this work, we introduce two data-efficient, top-down methods for estimating χ parameters using the Random Phase Approximation (RPA): (i) Boundary Nonlinear Regression (Boundary-NLR), which fits theoretical spinodal boundaries to experimental phase boundaries, and (ii) Surrogate Model Inverse Parameter Estimation (SMIPE), which uses a Gaussian Process Classifier to fit sparse phase maps via a surrogate model. Both methods allow rapid parametrization of polymer field-theoretic models without the need for additional experiments. We evaluate these approaches on data sets involving polymer–solvent–nonsolvent ternary mixtures and block copolymer–solvent systems, demonstrating their robustness to experimental noise and their relevance for real-world formulation design.

copolymers↗

Electric field triggering the spin reorientation and controlling the absorption and release of heat in the induced multiferroic compound EuTiO{sub 3}

We report remarkable results due to the coupling between the magnetization and the electric field induced polarization in EuTiO{sub 3}. Using a microscopic model Hamiltonian to describe the three coupled sublattices, Eu-(spin-up), Eu-(spin-down), and Ti-(moment), the spin flop and spin reorientation phase transitions were described with and without the electric-magnetic coupling interaction. The external electric field can be used to tune the temperature of the spin reorientation phase transition T{sub SR} = T{sub SR}(E). When the T{sub SR} is tuned around the EuTiO{sub 3}—Néel temperature (T{sub N} = 5.5 K), an outstanding effect emerges in which EuTiO{sub 3} releases heat under magnetic field change. The electric field controlling the spin reorientation transition and the endo-exothermic processes are discussed through the microscopic interactions model parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Predictive Tools for Customizing Heat Treatment of Additively Manufactured Aerospace Components

Laser-bed powder fusion (LBPF) additive manufacturing is increasingly being used to produce components of complex geometries using the Ni-base superalloy Inconel 718. The composition and the microstructure of the alloy are currently well optimized for wrought components made using conventional manufacturing processes such as rolling, forging, extrusion, etc. The attractive mechanical properties of the alloy result from the underlying austenitic matrix with fine equiaxed grains, and a high density and uniform distribution of the precipitation hardening phase, γ". Heat treatment steps such as homogenization, solutioning and aging are well documented for the wrought alloy. However, when the same wrought alloy compositions are used for the additive manufacturing (AM) processes, the asprocessed microstructure is significantly different, because of the different thermal history associated with LBPF, including rapid solidification and multiple temperature excursions that lead to multiple re-melting and reheating in the solid state. Rapid solidification introduces potential non-equilibrium effects at the moving solid-liquid interfaces that impact the extent of solute segregation, as well as the morphology of the dendritic grains that form. In order to recover the target mechanical properties, AM components have to undergo post-process heat treatments. However, such heat treatments have to be custom designed for the AM process and the component geometry because of the expected vast differences in the microstructure at various locations of a component with complex geometry. The homogenization and precipitation steps should be optimized for the component so that target mechanical properties can be obtained throughout the part. The objective of this research is to utilize High Performance Computing in phase field simulations of microstructure evolution during post-processing of AM components. The physics-based modeling will be beneficial in reducing the experimental effort required for heat treatment process selection, optimization, and certification, thus leading to a significant reduction in energy consumption for AM and post-processing heat treatment. The optimization study will help identify heat treatments steps that are critical for development of a final desired microstructure with the minimum energy input. This combined with shortening of the production cycle (time-to-market) by reducing the number of failed parts (property targets), and reduction in the number of iterations for process optimization, will enable 30-40% savings in the energy costs. Phase field simulations of the degree of homogenization and the effect of local matrix composition on the nucleation and growth of competing precipitating phases were performed using the Microstructure Evolution Using Massively Parallel Phase Field Simulations code developed in-house at the Oak Ridge National Laboratory. The simulations were able to successfully capture the kinetics of nucleation and growth, and morphologies of various precipitating phases as a function of local matrix compositions and composition gradients characteristic of local microstructures arising from location-dependent variations in the thermal conditions. Future work will involve extending the simulations to a length scale consisting of multiple dendrites, so that the effect of homogenization on the coarsening of the dendrites can be simulated and used as an additional input to the optimization of the heat treatment process.

36 MATERIALS SCIENCE↗

Model-independent measurement of the charge density distribution along an Fe atom probe needle using off-axis electron holography without mean inner potential effects

The one-dimensional charge density distribution along an electrically biased Fe atom probe needle is measured using a model-independent approach based on off-axis electron holography in the transmission electron microscope. Both the mean inner potential and the magnetic contribution to the phase shift are subtracted by taking differences between electron-optical phase images recorded with different voltages applied to the needle. The measured one-dimensional charge density distribution along the needle is compared with a similar result obtained using model-based fitting of the phase shift surrounding the needle. On the assumption of cylindrical symmetry, it is then used to infer the three-dimensional electric field and electrostatic potential around the needle with ∼10 nm spatial resolution, without needing to consider either the influence of the perturbed reference wave or the extension of the projected potential outside the field of view of the electron hologram. The present study illustrates how a model-independent approach can be used to measure local variations in charge density in a material using electron holography in the presence of additional contributions to the phase, such as those arising from changes in mean inner potential and specimen thickness.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

QCD phase diagram at finite baryon and isospin chemical potentials

The phase structure of two-flavor QCD is explored for thermal systems with finite baryon- and isospin-chemical potentials, {mu}{sub B} and {mu}{sub iso}, by using the Polyakov-loop extended Nambu-Jona-Lasinio (PNJL) model. The PNJL model with the scalar-type eight-quark interaction can reproduce lattice QCD data at not only {mu}{sub iso}={mu}{sub B}=0, but also {mu}{sub iso}>0 and {mu}{sub B}=0. In the {mu}{sub iso}-{mu}{sub B}-T space, where T is temperature, the critical endpoint of the chiral phase transition in the {mu}{sub B}-T plane at {mu}{sub iso}=0 moves to the tricritical point of the pion-superfluidity phase transition in the {mu}{sub iso}-T plane at {mu}{sub B}=0 as {mu}{sub iso} increases. The thermodynamics at small T is controlled by {radical}({sigma}{sup 2}+{pi}{sup 2}) defined by the chiral and pion condensates, {sigma} and {pi}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quantum field theory for the chiral clock transition in one spatial dimension

We describe the quantum phase transition in the N-state chiral clock model in spatial dimension d = 1. With couplings chosen to preserve time-reversal and spatial inversion symmetries, such a model is in the universality class of recent experimental studies of the ordering of pumped Rydberg states in a one-dimensional chain of trapped ultracold alkali atoms. For such couplings and N = 3, the clock model is expected to have a direct phase transition from a gapped phase with a broken global Z N symmetry, to a gapped phase with the Z N symmetry restored. The transition has dynamical critical exponent z ≠ 1, and so cannot be described by a relativistic quantum field theory. We use a lattice duality transformation to map the transition onto that of a Bose gas in d = 1, involving the onset of a single-boson condensate in the background of a higher-dimensional N-boson condensate. Here, we present a renormalization group analysis of the strongly coupled field theory for the Bose gas transition in an expansion in 2 – d, with 4 – N chosen to be of order 2 – d. At two-loop order, we find a regime of parameters with a renormalization group fixed point which can describe a direct phase transition. We also present numerical density-matrix renormalization group studies of lattice chiral clock and Bose gas models for N = 3, finding good evidence for a direct phase transition, and obtain estimates for z and the correlation length exponent ν.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗