Search NASA⌕ Search

SEARCH · Search NASA

Results for “RESISTANCE DEVICE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Nanostructured Materials for High Efficiency Low Cost Solution-Processed Photovoltaics

The goal of the project was to develop a suite of materials coupled with processing technologies aimed at the fabrication of entirely solution-processed photovoltaic devices. Most of the emphasis in terms of innovation was placed on the transparent electrodes, widely considered a critical component of the solar cell in terms of cost and performance. The active layer technologies proposed hinged on the fabrication and deposition of semiconducting nanoparticles. The electrode development hit all the milestones proposed: by the end of the grant we were able to fabricate transparent and flexible electrodes with transmission over the solar spectrum higher than 85% and sheet resistance lower than 10 Ω/square. To the best of our knowledge, this is the highest-performance transparent electrode reported. Furthermore these electrodes were deposited by spray-coating, a large-area, low-cost deposition techniques. Hence the first main goal of the proposal, which was to find an alternative to ITO was successfully achieved. Organic photovoltaic devices were made with these electrodes having a performance indistinguishable from that of devices made on ITO (the industry standard), e.g. ~5% for P3HT:PCBM cells. We also innovated in the active-area part of the device where semiconducting inks were designed rather than nanoparticle suspensions. The process we selected, called air-stable ink rolling (AIR) allowed to deposit well-controlled films of ternary and quaternary II-VI semiconductors. Developing a new technology from scratch proved to be more challenging than anticipated and therefore we were not able to demonstrate a fully integrated device using our nanostructured high-performance transparent electrodes as well as AIR active layers. As a result, we did not achieve the second main goal of the proposal, which was to fabricate an entire cell using nanostructured materials. We were able to develop the components separately but did not integrate them in a device.

14 SOLAR ENERGY↗

High-speed tunable generation of random number distributions using actuated perpendicular magnetic tunnel junctions

Perpendicular magnetic tunnel junctions (pMTJs) actuated by nanosecond pulses are emerging as promising devices for true random number generation (TRNG) due to their intrinsic stochastic behavior and high throughput. In this work, we demonstrate the tunability and quality of random number distributions generated by pMTJs operating at a frequency of 104 MHz. First, changing the pulse amplitude is used to systematically vary the probability bias. The variance of the resulting bitstreams closely matches the expected binomial distribution, demonstrating consistency with an underlying sequence of Bernoulli trials. Second, the quality of uniform distributions of 8-bit random numbers generated with a probability bias of 0.5 is considered. A reduced chi-square analysis of these data shows that only two XOR operations are sufficient to achieve this distribution with p-values greater than 0.05. Finally, we show that there is a correlation between long-term probability bias variations and pMTJ resistance. These findings suggest that variations in the characteristics of the pMTJ underlie the observed variation of probability bias. In conclusion, our results highlight the potential of stochastically actuated pMTJs for high-speed, tunable TRNG applications, showing the importance of the stability of pMTJ device characteristics in achieving reliable, long-term performance.

Magnetic tunnel junctions↗

Perovskite Photovoltaic Devices with Carbon-Based Electrodes Withstanding Reverse-Bias Voltages up to –9 V and Surpassing IEC 61215:2016 International Standard

One of the key challenges of perovskite photovoltaics (PV) is the long-term stability. Although efforts are made to improve the lifetime of perovskite PV devices, their degradation under reverse-bias conditions is barely addressed. Herein, perovskite solar cells with carbon-based electrodes are presented which demonstrate superior resilience against reverse-bias-induced degradation. Although their breakdown voltage is identified to be at approximately -3.6 V, cells do not degrade until the applied reverse-bias exceeds -9 V. Two main degradation mechanisms are identified: 1) iodine loss due to hole tunneling into perovskite, which takes place even at low reverse-bias but decomposes the perovskite only after long time durations; and 2) rapid heating at large reverse-bias leading to formation of PbI2, which starts at shunts and then follows the path of the least resistance for the cell current, which is primarily influenced by the electrode sheet resistances. Finally, perovskite solar modules with carbon-based electrodes are demonstrated, which are subjected to a "hotspot" test described in the IEC 61215:2016 international standard at an accredited module testing laboratory. Passing this accelerated test for the first time confirms the superior stability of perovskite PV devices with carbon-based electrodes and highlights their large industrialization potential.

14 SOLAR ENERGY↗

The Effects of Hydrogen Iodide Back Surface Treatment on CdTe Solar Cells

An appropriate electrical back contact in CdTe solar cells is crucial to achieving high power conversion efficiency. In this work, we develop a facile back surface treatment method for CdTe solar cells using hydroiodic acid (HI) and investigate the effects of HI etching on the CdTe surfaces. The electrical properties of the CdTe absorber and interfaces are characterized by current-voltage, capacitance-voltage, admittance spectroscopy, and complex capacitance spectroscopy measurements. Here, the HI-etched devices show slightly higher apparent carrier concentrations than the control devices, suggesting an increased copper doping in the CdTe absorber. The potential barrier height of the back contact is reduced from 0.430 to 0.368 eV after the HI-treatment, accompanied by reduced contact resistance and carrier recombination. Additionally, the HI-treatment eliminates a defect signature at 0.409 eV. All of these HI-treatment effects lead to improved power conversion efficiency of CdTe solar cells through enhancement of the fill factor, the short circuit current, and open circuit voltage in order of significance.

14 SOLAR ENERGY↗

Optical control of orbital magnetism in magic-angle twisted bilayer graphene

Flat bands in twisted graphene structures host various strongly correlated and topological phenomena. Optically probing and controlling them can reveal important information such as symmetry and dynamics, but this has been challenging due to the small energy gap compared with optical wavelengths. Here, in this study, we report on the near-infrared optical control of orbital magnetism and associated anomalous Hall effects in a magic-angle twisted bilayer graphene on a monolayer WSe 2 device. We demonstrate control over the hysteresis and amplitude of the anomalous Hall effect near integer moiré fillings using circularly polarized light. By modulating the light helicity, we observe periodic modulation of the transverse resistance in a wide range of fillings, indicating light-induced orbital magnetization through a large inverse Faraday effect. At the transition between metallic and anomalous Hall effect regimes, we also reveal large and random switching of the Hall resistivity, which we attribute to the light-tuned percolating cluster of magnetic domains. Our results demonstrate the potential of the optical manipulation of correlation and topology in moiré structures.

Persky, Eylon [Stanford Univ., CA (United States);↗

Inhomogeneity Induced Coupling in YBCO/BaTiO{sub 3} Composites

Ferroelectric and high temperature superconducting materials are two promising materials for future electronic devices. The superconducting properties and the related microstructures of YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} with BaTiO{sub 3} addition, prepared by partial melt processing, were investigated with temperature-resistivity, X-ray diffraction and SEM-EDX analysis. For lower concentration of BaTiO{sub 3} it shows a fractal behaviour approaching the exponent of three-dimensional percolation model. The transport properties studied by four-probe arrangement show a different behaviour depending on the wt.% of ferroelectric to superconductor.

36 MATERIALS SCIENCE↗

Rheological behavior and cryogenic properties of cyanate ester/epoxy insulation material for fusion superconducting magnet

In a Tokamak fusion reactor device like ITER, insulation materials for superconducting magnets are usually fabricated by a vacuum pressure impregnation (VPI) process. Thus these insulation materials must exhibit low viscosity, long working life as well as good radiation resistance. Previous studies have indicated that cyanate ester (CE) blended with epoxy has an excellent resistance against neutron irradiation which is expected to be a candidate insulation material for a fusion magnet. In this work, the rheological behavior of a CE/epoxy (CE/EP) blend containing 40% CE was investigated with non-isothermal and isothermal viscosity experiments. Furthermore, the cryogenic mechanical and electrical properties of the composite were evaluated in terms of interlaminar shear strength and electrical breakdown strength. The results showed that CE/epoxy blend had a very low viscosity and an exceptionally long processing life of about 4 days at 60 °C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Negative differential resistance behavior in phosphorus-doped armchair graphene nanoribbon junctions

In this present work, we investigate the electronic transport properties of phosphorus-doped armchair graphene nanoribbon (AGNR) junctions by employing nonequilibrium Green's functions in combination with the density-function theory. Two phosphorus (P) atoms are considered to substitute the central carbon atom with the different width of AGNRs. The results indicate that the electronic transport behaviors are strongly dependent on the width of the P-doped graphene nanoribbons. The current-voltage characteristics of the doped AGNR junctions reveal an interesting negative differential resistance (NDR) and exhibit three distinct family (3 n, 3 n + 1, 3 n + 2) behaviors. These results display that P doping is a very good way to achieve NDR of the graphene nanoribbon devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and charge ordering in nanosized manganites

Perovskite manganites exhibit a wide range of functional properties, such as colossal magneto-resistance, magnetocaloric effect, multiferroic property, and some interesting physical phenomena including spin, charge, and orbital ordering. Recent advances in science and technology associated with perovskite oxides have resulted in the feature sizes of microelectronic devices down-scaling into nanoscale dimensions. The nanoscale perovskite manganites display novel magnetic and electronic properties that are different from their bulk and film counterparts. Understanding the size effects of perovskite manganites at the nanoscale is of importance not only for the fundamental scientific research but also for developing next generation of electronic and magnetic nanodevices. In this paper, the current understanding and the fundamental issues related to the size effects on the magnetic properties and charge ordering in manganites are reviewed, which covers lattice structure, magnetic and electronic properties in both ferromagnetic and antiferromagnetic based manganites. In addition to review the literatures, this article identifies the promising avenues for the future research in this area.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of carrier overflow on the forward-voltage characteristics of InGaN-based light-emitting diodes

We investigate the influence of carrier overflow on the forward-voltage characteristics of the InGaN-based blue light-emitting-diode (LED) by comparing the temperature-dependent characteristics of the electroluminescence (EL) efficiency, the EL spectra, and the current-voltage relation over a wide range of temperature (50–300 K). Based on these experimental results, we demonstrate that the simple ohmic potential drop in the Shockley diode equation is not sufficient to explain the experimental data when the severe carrier overflow to the p-(Al)GaN layer induces the efficiency droop in the LED device. The anomalous relation between current and voltage at cryogenic temperatures is explained by the space-charge-limited current formed by the overflown electrons, rather than by the increase of a constant series resistance in the p-(Al)GaN layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

n{sup +}-GaN grown by ammonia molecular beam epitaxy: Application to regrown contacts

We report on the low-temperature growth of heavily Si-doped (>10{sup 20 }cm{sup −3}) n{sup +}-type GaN by N-rich ammonia molecular beam epitaxy (MBE) with very low bulk resistivity (<4 × 10{sup −4} Ω·cm). This is applied to the realization of regrown ohmic contacts on InAlN/GaN high electron mobility transistors. A low n{sup +}-GaN/2 dimensional electron gas contact resistivity of 0.11 Ω·mm is measured, provided an optimized surface preparation procedure, which is shown to be critical. This proves the great potentials of ammonia MBE for the realization of high performance electronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A carbon nanotube based resettable sensor for measuring free chlorine in drinking water

Free chlorine from dissolved chlorine gas is widely used as a disinfectant for drinking water. The residual chlorine concentration has to be continuously monitored and accurately controlled in a certain range around 0.5–2 mg/l to ensure drinking water safety and quality. However, simple, reliable, and reagent free monitoring devices are currently not available. Here, we present a free chlorine sensor that uses oxidation of a phenyl-capped aniline tetramer (PCAT) to dope single wall carbon nanotubes (SWCNTs) and to change their resistance. The oxidation of PCAT by chlorine switches the PCAT-SWCNT system into a low resistance (p-doped) state which can be detected by probing it with a small voltage. The change in resistance is found to be proportional to the log-scale concentration of the free chlorine in the sample. The p-doping of the PCAT-SWCNT film then can be electrochemically reversed by polarizing it cathodically. This sensor not only shows good sensing response in the whole concentration range of free chlorine in drinking water but is also able to be electrochemically reset back many times without the use of any reagents. This simple sensor is ideally suited for measuring free chlorine in drinking water continuously.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Origin of colossal magnetoresistance in LaMnO 3 manganite

Significance Magnetoresistance is the change of resistance in the presence of an external magnetic field. In rare-earth manganite compounds, this change is orders of magnitude stronger than usual and it is promising for developing new spintronic and electronic devices. The colossal magnetoresistance (CMR) effect has been observed only in chemically doped manganite compounds. We report the realization of CMR in a compressed single-valent LaMnO 3 manganite compound. Pressure generates an inhomogeneous phase constituted by two components: a nonconductive one with a unique structural distortion and a metallic one without distortion. The CMR takes place when the competition between the two phases is at a maximum. We identify phase separation as the driving force for generating CMR in LaMnO 3 .

36 MATERIALS SCIENCE↗

Developing solid-surface plasma facing components for pilot plants and reactors with replenishable wall claddings and continuous surface conditioning. Part A: concepts and questions

Abstract It is estimated that pilot plants and reactors may experience rates of net erosion and deposition of solid plasma facing component (PFC) material of 10 3 –10 5 kg yr −1 . Even if the net erosion (wear) problem can be solved, the redeposition of so much material has the potential for major interference with operation, including disruptions due to so-called ‘unidentified flying objects (UFOs)’ and unsafe dust levels. The potential implications appear to be no less serious than for plasma contact with the divertor target: a dust explosion or a major UFO-disruption could be as damaging for an actively-cooled deuterium-tritium (DT) tokamak as target failure. It will therefore be necessary to manage material deposits to prevent their fouling operation. This situation appears to require a fundamental paradigm shift with regard to meeting the challenge of taming the plasma–material interface: it appears that any acceptable solid PFC material will in effect be flow-through , like liquid–metal PFCs, although at far lower mass flow rates. Solid PFC material will have to be treated as a consumable , like brake pads in cars. ITER will use high-Z (tungsten) armor on the divertor targets and low-Z (beryllium) on the main walls. The ARIES-AT reactor design calls for a similar arrangement, but with SiC cladding on the main walls. Non-metallic low-Z refractory materials such as ceramics (graphite, SiC, etc) used as in situ replenishable, relatively thin—of order mm—claddings on a substrate which is resistant to neutron damage could provide a potential solution for the main walls, while reducing the risk of degrading the confined plasma. Separately, wall conditioning has proven essential for achieving high performance. For DT devices, however, standard methods appear to be unworkable, but recently powder droppers injecting low-Z material ∼continuously into discharges have been quite effective and may be usable in DT devices as well. The resulting massive generation of low-Z debris, however, has the same potential to seriously disrupt operation as noted above. Powder droppers provide a unique opportunity to carry out controlled studies on the management of low-Z slag in all current tokamaks, independent of whether their protection tiles use low-Z or high-Z material.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Use of Transition Models to Design High Performance TESs for the LCLS-II Soft X-Ray Spectrometer

We are designing an array of transition-edge sensor (TES) microcalorimeters for a soft X-ray spectrometer at the Linac Coherent Light Source at SLAC National Accelerator Laboratory to coincide with upgrades to the free electron laser facility. The complete spectrometer will have 1000 TES pixels with energy resolution of 0.5 eV full-width at half-maximum (FWHM) for incident energies below 1 keV while maintaining pulse decay-time constants shorter than 100 μs. In the past, TES pixels have often been designed for a particular scientific application via a combination of simple scaling relations and trial-and-error experimentation with device geometry. We have improved upon this process by using our understanding of transition physics to guide TES design. Using the two-fluid approximation of the phase-slip line model for TES resistance, we observe how the geometry and critical temperature of a TES will affect the shape of the transition. We have used these techniques to design sensors with a critical temperature of 55 mK. The best sensors achieve an energy resolution of 0.75 eV FWHM at 1.25 keV. Building upon this result, we show how the next generation of sensors can be designed to reach our goal of 0.5 eV resolution.

47 OTHER INSTRUMENTATION↗

Considerations about Large Area___Low Cost Fast Imaging Photo-detectors

The Large Area Picosecond Photodetectors described in this contribution incorporate a photocathode and a borosilicate glass capillary Micro-Channel Plate (MCP) pair functionalised by atomic layer deposition (ALD) of separate resistive and secondary emission materials. Initial testing with matched pairs of small glass capillary test disks has demonstrated gains of the order of 10{sup 5}-10{sup 6}. Compared to other fast imaging devices, these photodetectors are expected to provide timing resolutions in the 10-100 ps range, and two-dimension position in the sub-millimeter range. If daisy chained, large detectors read at both ends with fast digitising integrated electronics providing zero-suppressed calibrated data should be produced at relatively low cost in large quantities.

47 OTHER INSTRUMENTATION↗

Nanowire-based All Oxide Solar Cells

We present an all-oxide solar cell fabricated from vertically oriented zinc oxide nanowires and cuprous oxide nanoparticles. Our solar cell consists of vertically oriented n-type zinc oxide nanowires, surrounded by a film constructed from p-type cuprous oxide nanoparticles. Our solution-based synthesis of inexpensive and environmentally benign oxide materials in a solar cell would allow for the facile production of large-scale photovoltaic devices. We found that the solar cell performance is enhanced with the addition of an intermediate oxide insulating layer between the nanowires and the nanoparticles. This observation of the important dependence of the shunt resistance on the photovoltaic performance is widely applicable to any nanowire solar cell constructed with the nanowire array in direct contact with one electrode.

36 MATERIALS SCIENCE↗

Investigation and optimization of low-frequency noise performance in readout electronics of dc superconducting quantum interference device

We investigated and optimized the low-frequency noise characteristics of a preamplifier used for readout of direct current superconducting quantum interference devices (SQUIDs). When the SQUID output was detected directly using a room-temperature low-voltage-noise preamplifier, the low-frequency noise of a SQUID system was found to be dominated by the input current noise of the preamplifiers in case of a large dynamic resistance of the SQUID. To reduce the current noise of the preamplifier in the low-frequency range, we investigated the dependence of total preamplifier noise on the collector current and source resistance. When the collector current was decreased from 8.4 mA to 3 mA in the preamplifier made of 3 parallel SSM2220 transistor pairs, the low-frequency total voltage noise of the preamplifier (at 0.1 Hz) decreased by about 3 times for a source resistance of 30 Ω whereas the white noise level remained nearly unchanged. Since the relative contribution of preamplifier's input voltage and current noise is different depending on the dynamic resistance or flux-to-voltage transfer of the SQUID, the results showed that the total noise of a SQUID system at low-frequency range can be improved significantly by optimizing the preamplifier circuit parameters, mainly the collector current in case of low-noise bipolar transistor pairs.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗