Search NASA⌕ Search

SEARCH · Search NASA

Results for “SOLID STATE DEVICE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Precision measurement of electron-electron scattering in GaAs/AlGaAs using transverse magnetic focusing

Electron-electron (e-e) interactions assume a cardinal role in solid-state physics. Quantifying the e-e scattering length is hence critical. In this paper we show that the mesoscopic phenomenon of transverse magnetic focusing (TMF) in two-dimensional electron systems forms a precise and sensitive technique to measure this length scale. Conversely we quantitatively demonstrate that e-e scattering is the predominant effect limiting TMF amplitudes in high-mobility materials. Using high-resolution kinetic simulations, we show that the TMF amplitude at a maximum decays exponentially as a function of the e-e scattering length, which leads to a ready approach to extract this length from the measured TMF amplitudes. The approach is applied to measure the temperature-dependent e-e scattering length in high-mobility GaAs/AlGaAs heterostructures. The simulations further reveal current vortices that accompany the cyclotron orbits - a collective phenomenon counterintuitive to the ballistic transport underlying a TMF setting.

36 MATERIALS SCIENCE↗

Exploiting Internal Parallelism for Address Translation in Solid-State Drives

Solid-state Drives (SSDs) have changed the landscape of storage systems and present a promising storage solution for data-intensive applications due to their low latency, high bandwidth, and low power consumption compared to traditional hard disk drives. SSDs achieve these desirable characteristics using internal parallelism—parallel access to multiple internal flash memory chips—and a Flash Translation Layer (FTL) that determines where data are stored on those chips so that they do not wear out prematurely. However, current state-of-the-art cache-based FTLs like the Demand-based Flash Translation Layer (DFTL) do not allow IO schedulers to take full advantage of internal parallelism, because they impose a tight coupling between the logical-to-physical address translation and the data access. In this study to address this limitation, we introduce a new FTL design called Parallel-DFTL that works with the DFTL to decouple address translation operations from data accesses. Parallel-DFTL separates address translation and data access operations into different queues, allowing the SSD to use concurrent flash accesses for both types of operations. We also present a Parallel-LRU cache replacement algorithm to improve the concurrency of address translation operations. To compare Parallel-DFTL against existing FTL approaches, we present a Parallel-DFTL performance model and compare its predictions against those for DFTL and an ideal page-mapping approach. We also implemented the Parallel-DFTL approach in an SSD simulator using real device parameters, and used trace-driven simulation to evaluate Parallel-DFTL’s efficacy. Our evaluation results show that Parallel-DFTL improved the overall performance by up to 32% for the real IO workloads we tested, and by up to two orders of magnitude with synthetic test workloads. Finally, we also found that Parallel-DFTL is able to achieve reasonable performance with a very small cache size and that it provides the best benefit for those workloads with large request size or with high write ratio.

97 MATHEMATICS AND COMPUTING↗

Improving the efficiency of high-power diode lasers using diamond heat sinks

Using multifunctional ion beam and magnetron sputtering systems, we have developed chemical and vacuum techniques for producing metallic coatings firmly adherent to various surfaces, with application to copper and diamond heat sinks for diode lasers. Conditions have been optimised for mounting diode lasers and bars using the proposed metallisation processes, and significant improvements in the output parameters of the devices have been achieved. The power output of cw laser diodes on diamond heat sinks increases by up to a factor of 2, the linear (working) portion of their power-current characteristic becomes markedly broader, and their slope efficiency increases by a factor of 1.5 - 2 relative to that of lasers on copper heat spreaders. The use of diamond heat sinks extends the drive current range of pulsed diode bars by a factor of 2 - 3 and enables them to operate at more than one order of magnitude longer pump pulse durations (up to milliseconds) when the pulse repetition rate is at least 10 Hz. (lasers)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structural and magnetic properties of CoTeMo⁢O 6

Here, we have conducted a comprehensive investigation into the magnetic properties of the chiral multiferroic material CoTeMo⁢O 6 . In contrast with the previous claim of canted antiferromagnetic order with ferromagnetic components [Y. Doi et al., J. Solid State Chem. 182, 3232 (2009)], our investigation reveals an antiferromagnetic ground state with compensated moments, providing an interesting platform for exploring exotic material properties. Through careful measurements of magnetization under a series of applied fields, we demonstrate that there exist two sequential field-induced magnetic transitions in CoTeMo⁢O 6 , with one occurring at 𝐻 𝑐⁢1 =460 Oe along the 𝑎 axis, and the other at 𝐻 𝑐⁢2 =1.16 T with the field along the 𝑏 axis. The values of 𝐻 𝑐⁢1 and 𝐻 𝑐⁢2 exhibit strong angular dependence and diverge with different rates as the applied field is rotated 90 ° within the 𝑎⁢𝑏 plane. This reflects the distinct nature of these transitions, which is further supported by the different critical behavior of 𝐻 𝑐⁢1 and 𝐻 𝑐⁢2 , characterized by the values of 𝛾, in the function of 𝐻 𝑐 =𝐻 0 ⁡(1−𝑇/𝑇 𝑐 ) 𝛾 . Furthermore, we have demonstrated that there exist structural and magnetic twin domains in CoTeMo⁢O 6 that strongly affect the experimental measurement of their macroscopic properties. Intriguingly, these twin domains can be related to the orthorhombicity/chirality of the crystal structure with the space group 𝑃⁢2 1 ⁢2 1⁢ 2. We further explored the magnetic and structural domains with uniaxial pressure and polarized light microscopy. Our results suggest that CoTeMo⁢O 6 could be used as a unique platform for investigating the intriguing physics involving intertwined degrees of freedom. The tunability of the underlying domain distribution and its strong anisotropy could also be useful for developing functional devices and applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superionic conduction in solid polymer electrolytes – decoupling ion transport from segmental relaxation

Solvent-free, solid polymer electrolytes (SPEs) are promising candidates for next-generation, electrochemical energy storage systems due to their potential to enhance safety and performance, enable flexible device architectures, and streamline manufacturing processes. Conventional SPEs suffer from limited ionic conductivity due to the strong coupling between ion transport and (generally slow) polymer segmental relaxation. The realization of superionic conduction in SPEs, in which ions move faster than the structural relaxation of the polymers, requires a shift in design principles to promote this type of decoupled ion motion. In this perspective, we discuss how polymer architecture, ion–ion correlations, and ion–polymer interactions can unlock superionic behavior. We highlight several key design features, such as crystallinity, bulky side groups, high molecular weight, and percolating ionic aggregation, with a focus on creating low-barrier transport pathways in various polymer systems. We also demonstrate opportunities to combine polymer chemistry and data science through high-throughput and automated screening approaches to reveal how phase behavior, ion dynamics, and ionic interactions govern transport, thereby potentially enabling data-driven discovery of superionic polymer electrolyte materials.

Yang, Mengying [Univ. of Delaware, Newark, DE (Uni↗

The crystal structure and magnetic properties of Ba{sub 2−x}Sr{sub x}Co{sub 2}Fe{sub 12}O{sub 22}

We have synthesized the Ba{sub 2−x}Sr{sub x}Co{sub 2}Fe{sub 12}O{sub 22} samples (x = 0.1, 0.2, 0.3, 0.4, 0.5) by the solid-state reaction method and investigated their crystalline and magnetic properties by X-ray diffractometer (XRD), Mössbauer spectrometer, vibrating sample magnetometer, and network analyzer. XRD patterns show that all samples are rhombohedral with space group R-3m. The lattice constants a{sub 0} and c{sub 0} decrease with Sr substitution due to smaller ion radius of Sr{sup 2+} (1.27 Å) than that of Ba{sup 2+} (1.43 Å). The Mössbauer spectroscopy measurements show that the relative area ratios of Fe ion were maintained constant regardless of the Sr concentration. However, average magnetic hyperfine field slightly increased with the Sr concentration. This observation agrees with the fact that the saturation magnetization (M{sub s}) linearly increases due to the increasing super-exchange interaction, originated from the difference in the ionic radius between Ba{sup 2+} and Sr{sup 2+}. To investigate its properties at high frequency range, all samples were sintered at 1100 °C, and complex permeability and permittivity were measured by network analyzer between 100 MHz and 4 GHz. For x below 0.3, the initial permeability at 100 MHz increases, at higher values of x, its value decreases. Our study shows that magnetic properties of Sr{sup 2+} substitution for Ba{sup 2+} in Y-type hexaferrite as well as low magnetic loss less than 0.1 in 1 GHz band, indicating the potential application of Ba{sub 2−x}Sr{sub x}Co{sub 2}Fe{sub 12}O{sub 22} samples for RF and antenna devices in ultra high frequency band.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Visualization of Current and Mapping of Elements in Quantum Dot Solar Cells

The delicate influence of properties such as high surface state density and organic-inorganic boundaries on the individual quantum dot electronic structure complicates pursuits toward forming quantitative models of quantum dot thin films ab initio. Our report describes the application of electron beam-induced current (EBIC) microscopy to depleted-heterojunction colloidal quantum dot photovoltaics (DH-CQD PVs), a technique which affords one a map of current production within the active layer of a PV device. The effects of QD sample size polydispersity as well as layer thickness in CQD active layers as they pertain to current production within these PVs are imaged and explained. The results from these experiments compare well with previous estimations, and confirm the ability of EBIC to function as a valuable empirical tool for the design and betterment of DH-CQD PVs. Lastly, extensive and unexpected PbS QD penetration into the mesoporous TiO 2 layer is observed through imaging of device cross sections by energy-dispersive X-ray spectroscopy combined with scanning transmission electron microscopy. Finally, the effects of this finding are discussed and corroborated with the EBIC studies on similar devices.

14 SOLAR ENERGY↗

Spatially Enhanced Electrostatic Doping in Graphene Realized via Heterointerfacial Precipitated Metals

Forming heavily-doped regions in 2D materials, like graphene, is a steppingstone to the design of emergent devices and heterostructures. Here, a selective-area approach is presented to tune the work-function and carrier density in monolayer graphene by spatially synthesizing sub-monolayer gallium beneath the 2D-solid. The localized metallic gallium is formed via precipitation from an underlying diamond-like carbon (DLC) film that is spatially implanted with gallium-ions. By controlling the interfacial precipitation process with annealing temperature, spatially precise ambipolar tuning of the graphene work-function is achieved, and the tunning effect preserved upon cooling to ambient conditions. Consequently, charge carrier densities from ≈1.8 × 10 10 cm -2 (hole-doped) to ≈7 × 10 13 cm -2 (electron-doped) are realized, confirmed by in situ and ex situ measurements. The theoretical studies corroborated the role of gallium at the heterointerface on charge transfer and electrostatic doping of the graphene overlayer. Specifically, sub-monolayer gallium facilitates heavy n-doping in graphene. Extending this doping strategy to other implantable elements in DLC provides a new means of exploring the physics and chemistry of highly-doped 2D materials.

36 MATERIALS SCIENCE↗

Anti-Hermitian photodetector facilitating efficient subwavelength photon sorting

The ability to split an incident light beam into separate wavelength bands is central to a diverse set of optical applications, including imaging, biosensing, communication, photocatalysis, and photovoltaics. Entirely new opportunities are currently emerging with the recently demonstrated possibility to spectrally split light at a subwavelength scale with optical antennas. Unfortunately, such small structures offer limited spectral control and are hard to exploit in optoelectronic devices. Here, we overcome both challenges and demonstrate how within a single-layer metafilm one can laterally sort photons of different wavelengths below the free-space diffraction limit and extract a useful photocurrent. This chipscale demonstration of anti-Hermitian coupling between resonant photodetector elements also facilitates near-unity photon-sorting efficiencies, near-unity absorption, and a narrow spectral response (~30 nm) for the different wavelength channels. This work opens up entirely new design paradigms for image sensors and energy harvesting systems in which the active elements both sort and detect photons.

36 MATERIALS SCIENCE↗

NANDFlashSim: High-Fidelity, Microarchitecture-Aware NAND Flash Memory Simulation [NANDFlashSim: Intrinsic Latency Variation Aware NAND Flash Memory System Modeling and Simulation at Microarchitecture Level]

As the popularity of NAND flash expands in arenas from embedded systems to high-performance computing, a high-fidelity understanding of its specific properties becomes increasingly important. Further, with the increasing trend toward multiple-die, multiple-plane architectures and high-speed interfaces, flash memory systems are expected to continue to scale and cheapen, resulting in their broader proliferation. However, when designing NAND-based devices, making decisions about the optimal system configuration is nontrivial, because flash is sensitive to a number of parameters and suffers from inherent latency variations, and no available tools suffice for studying these nuances. The parameters include the architectures, such as multidie and multiplane, diverse node technologies, bit densities, and cell reliabilities. Therefore, we introduce NANDFlashSim, a high-fidelity, latency-variation-aware, and highly configurable NAND-flash simulator, which implements a detailed timing model for 16 state-of-the-art NAND operations. Using NANDFlashSim, we notably discover the following. First, regardless of the operation, reads fail to leverage internal parallelism. Second, MLC provides lower I/O bus contention than SLC, but contention becomes a serious problem as the number of dies increases. Third, many-die architectures outperform many-plane architectures for disk-friendly workloads. Lastly, employing a high-performance I/O bus or an increased page size does not enhance energy savings.

97 MATHEMATICS AND COMPUTING↗

Inhomogeneous Magnetic Anisotropy in an Fe 5– x GeTe 2 Nanoflake Observed by Imaging

Few-layer flakes of ferromagnetic Fe 5–x GeTe 2 with x = 0.3 (F5GT) possess a c-axis magnetocrystalline anisotropy that is large enough below ∼200 K to outcompete the easy-plane shape anisotropy, yielding distinctive magnetic microstructures with out-of-plane (OOP) magnetizations. Using photoemission electron microscopy (PEEM) with magnetic contrast from X-ray magnetic circular dichroism (XMCD) to study a thermally demagnetized h-BN-protected nanoflake of F5GT at 110 K, we observe a micron-scale coexistence between domains with OOP magnetizations (∼70% areal fraction) and hitherto unknown domains in which in-plane (IP) magnetization components dominate (∼30% areal fraction). The regions with dominant IP magnetization components do not correlate with small variations of flake thickness (6–10 nm) and instead arise from local changes of magnetocrystalline anisotropy due to a hitherto unidentified chemical inhomogeneity that we suggest to be a higher concentration of Fe vacancies. Our observation of micron-scale inhomogeneity would likely be missed if imaging a single flake orientation and should affect the viability and performance of van der Waals (vdW) spintronic devices with F5GT electrodes.

2D materials↗

A review of technologies and performances of thermal treatment systems for energy recovery from waste

Highlights: • The topic of energy recovery from waste by thermal treatment is reviewed. • Combustion, gasification and pyrolysis were considered. • Data about energy recovery performances were collected and compared. • Main limitations to high values of energy performances were illustrated. • Diffusion of energy recovery from waste in EU, USA and other countries was discussed. - Abstract: The aim of this work is to identify the current level of energy recovery through waste thermal treatment. The state of the art in energy recovery from waste was investigated, highlighting the differences for different types of thermal treatment, considering combustion/incineration, gasification and pyrolysis. Also different types of wastes – Municipal Solid Waste (MSW), Refuse Derived Fuel (RDF) or Solid Refuse Fuels (SRF) and some typologies of Industrial Waste (IW) (sludge, plastic scraps, etc.) – were included in the analysis. The investigation was carried out mainly reviewing papers, published in scientific journals and conferences, but also considering technical reports, to gather more information. In particular the goal of this review work was to synthesize studies in order to compare the values of energy conversion efficiencies measured or calculated for different types of thermal processes and different types of waste. It emerged that the dominant type of thermal treatment is incineration associated to energy recovery in a steam cycle. When waste gasification is applied, the produced syngas is generally combusted in a boiler to generate steam for energy recovery in a steam cycle. For both the possibilities – incineration or gasification – cogeneration is the mean to improve energy recovery, especially for small scale plants. In the case of only electricity production, the achievable values are strongly dependent on the plant size: for large plant size, where advanced technical solutions can be applied and sustained from an economic point of view, net electric efficiency may reach values up to 30–31%. In small-medium plants, net electric efficiency is constrained by scale effect and remains at values around 20–24%. Other types of technical solutions – gasification with syngas use in internally fired devices, pyrolysis and plasma gasification – are less common or studied at pilot or demonstrative scale and, in any case, offer at present similar or lower levels of energy efficiency.

09 BIOMASS FUELS↗

Modeling the influence of the solid electrolyte interphase on the sand’s time and dendrite formation on lithium metal electrodes

Lithium metal is a sought after battery material for its high energy density due to the low electrochemical potential and density. However, lithium metal is also highly reactive, which results in a strong propensity for dendrite formation. The Sand’s time has previously been used to predict the time of dendrite initiation on metals that do not form a solid-electrolyte interphase (SEI), but it has been shown that the Sand’s time is not accurate for lithium electrodes when using transport parameters associated with the electrolyte. Thus, we built a numerical model to simulate lithium ion transport through a growing SEI to predict the Sand’s time. The numerical model is shown to be more accurate than previous analytical solutions, especially for low current densities. We then analyze the sensitivity of the Sand’s time to different SEI properties and the chemical potential gradients present in the SEI, driving lithium transport. The results showed that high lithium concentration has a greater impact at high current density, while fast diffusivity is more important at low current density. Lastly, we modeled the influence of surface roughness on the plating evolution and chemical potential gradients when an SEI is present in comparison to the electrolyte. As a result, we demonstrate that the SEI plays a critical role in lithium electrode stability, and that improved characterization techniques are needed to better understand transport through the SEI and increase lithium metal utilization in energy storage devices.

Chemistry↗

Anomalous elastic softening in ferroelectric hafnia under pressure

his study employs first-principles density-functional theory (DFT) calculations to explore the elastic and mechanical properties of ferroelectric hafnia (HfO 2 ) in its polar orthorhombic 𝑃⁢𝑐⁢𝑎⁢2 1 phase under varying hydrostatic pressure conditions up to 30 GPa. Utilizing a plane-wave basis set and Perdew-Burke-Ernzerhof generalized-gradient approximation for solids in our DFT calculations, we investigate both pure and yttrium-substituted HfO 2 . Our findings reveal an anomalous reduction in the 𝐶 33 component of the elastic tensor with increasing pressure, which becomes significant above 15 GPa and signals a potential pressure-driven structural phase transition at higher pressure. The analysis of atomic displacements under pressure sheds light on the unusual mechanical behavior and phase stability of this material. Additionally, we observe a transition from an indirect band gap to a direct band gap with increasing pressure, which could have significant implications for optical applications. Here, the effects of yttrium substitution on the mechanical and electronic properties are further examined, revealing that yttrium substitution softens the elastic response of this material and reduces the electronic band gap. These results enhance our understanding of elastic and mechanical responses of ferroelectric hafnia and its potential for applications in microelectronics, piezoelectric devices, and nonvolatile ferroelectric random-access memories. Further experimental validation is recommended to confirm our predictions and explore the practical implications of the observed phase transitions and electronic behavior of the ferroelectric hafnia under high-pressure conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CO2 hydrate crystal thickening, morphology, and Raman spectroscopy in a microfluidic device

Gas hydrates are a solid, crystalline form of water that often form at low temperatures and high pressures. Carbon dioxide (CO2) hydrates may form during carbon dioxide capture and storage (CCS) processes. These solid compounds may form in CO2 pipelines, potentially leading to a full blockage and process shutdown for plug removal. On the other hand, formation of CO2 hydrates may be desired for CO2 capture and separation. In either case, understanding the growth behavior and nature of the hydrates is vital to managing these CCS processes. Using a high-pressure, transparent microfluidic reactor, the crystalline film thickening of CO2 hydrates was observed and measured through visual microscopy and Raman spectroscopy. The impact of subcooling, pressure, and CO2 flow rate was investigated, and only CO2 flow rate was found to have a significant impact on the overall thickness of the film. Visual observations and Raman spectroscopy measurements confirmed that two distinct hydrate layers formed during thickening, one which was more porous than the other. The capillary-like channels in the porous layer indicated a mechanism for mass transfer of water through the hydrate layer. A model was developed based on this observation, and it was fit to the thickening data in order to obtain mass transfer coefficients. Results of this study can be applied to CO2 hydrate formation in pipelines and near porous media used for CO2 capture.

Wadsworth, Lindsey [Colorado School of Mines, Gold↗

Gain comparison in polar and nonpolar/ semipolar gallium-nitride-based laser diodes

Experimental gain spectra at continuous-wave (CW) operation of laser diodes (LDs) fabricated from c-plane, nonpolar and semipolar GaN-based materials emitting in violet, blue and green spectral regions are presented. Gain spectra were obtained using the Hakki–Paoli method at high resolution. The ability of the setup to resolve the sharp Fabry–Perot longitudinal peaks of the lasers at all injection currents allowed us to accurately measure the current density to reach transparency on the devices characterized in this work, and determine both total losses and differential modal gain curves up to threshold. We present a comparison of transparency current density and modal gain for nonpolar and c-plane LDs in violet and blue regions. The main parameters for the analysis are the internal electric fields (for c-plane lasers), hole effective masses and valence band splittings. In a preliminary analysis, we investigated the gain spectrum of semipolar green LDs and observed a significantly lower total linewidth (homogeneous plus inhomogeneous) than reported elsewhere, which seems to indicate that inhomogeneous broadening is not the main issue governing the evolution toward high performance green LDs.

36 MATERIALS SCIENCE↗

AI-powered municipal solid waste management: a comprehensive review from generation to utilization

The accumulation of municipal solid waste (MSW) continues to rise due to burgeoning population, rapid global urbanization and economic growth, intensifying ecological concerns associated with landfills and greenhouse gas (GHG) emissions. Over the past 2 decades, global waste generation has surged by 50%, with one-third remaining uncollected and about 70% sent to landfills. This review examines the critical role of integrating emerging technologies, such as advanced sensors and artificial intelligence (AI), into end-to-end MSW management to alleviate landfill burdens. The suitability of various AI tools for different stages of MSW management is assessed, alongside the deployment of advanced sensors including hyperspectral cameras, computer vision systems, and internet of things (IoT) devices for material identification. Applications of genetic algorithms and reinforcement learning for optimizing collection routes, reducing costs, and lowering emissions are highlighted. Life cycle assessment (LCA) across all stages of MSW management is also reviewed, along with future trends in leveraging generative AI, natural language processing (NLP), and agent-based AI systems to analyze waste generation patterns and public sentiment. Efficient collection and handling can be enhanced through route optimization with geographic information systems and real-time bin-level monitoring. Furthermore, sensor-embedded, real-time object detection systems paired with robotics enable material characterization and automated sorting, thereby lowering costs and diverting waste from landfills into value-added products for diverse industrial sectors including packaging, chemicals, textiles, metals and glass, transportation, and electronics industries. Without intervention, global waste is projected to reach 4.54 billion tons by 2050, contributing direct economic costs of $\$$400 billion and roughly 2.38 billion tons of CO 2 -equivalent emissions annually. This review demonstrates how AI-driven, end-to-end solutions for MSW management can mitigate economic and environmental challenges, while directly supporting the United Nations Sustainable Development (UNDP) goals related to innovation and infrastructure (SDG 9), sustainable cities (SDG 11), responsible consumption and production (SDG 12), and climate action (SDG 13).

09 BIOMASS FUELS↗

Optically induced quantum transitions in direct probed mesoscopic NbSe 2 for prototypical bolometers

Superconducting transition-edge sensors (TES) have emerged as fascinating devices to detect broadband electromagnetic radiation with low thermal noise. The advent of metallic transition metal dichalcogenides, such as NbSe 2 , has also created an impetus to understand their low-temperature properties, including superconductivity. Interestingly, NbSe 2 -based sensor within the TES framework remains unexplored. In this work, direct-probed superconducting NbSe 2 absorbers led to a proof-of-concept demonstration for the transduction of incoming light to heat, where a thermodynamic superconducting phase transition in NbSe 2 was evident to switch it to the normal-state, when biased below its superconducting transition temperature. A wavelength-dependent response of its optical absorption properties was observed, based on the incident optical excitation source used. Furthermore, extensive optical characterization studies were conducted using Raman spectroscopy, where the in-plane and out-of-plane thermal conductivity was empirically determined. Our results open new possibilities for the use of NbSe 2 in superconducting radiation detectors, including in a TES framework

47 OTHER INSTRUMENTATION↗