Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRIP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

The Cepheid mode problem

The modal behavior of RR Lyrae stars and low mass Cepheids has been investigated using a nonlinear relaxation technique and stability analysis. The advantages of this type of numerical approach in investigations of preferred mode of pulsation are discussed. The results obtained for both classes of variable stars are quite similar: first harmonic pulsation toward the blue, fundamental pulsation toward the red, and mixed-mode behavior at the extreme red edge of the instability strip. In addition, stars near the center of the strip can pulsate in either the fundamental or the first harmonic mode. Possible implications for observational results, including the Oosterhoff dichotomy of globular clusters and the beat Cepheids, are discussed.

Stellingwerf, R. F.↗
NASA NTRS1975

SLAR reconnaissance, Mimika-Eilanden Basin, Southern Trough of Irian Jaya

The SLAR was obtained in early April 1973 by means of an AN/APQ-97 K-band brute-force system. The flight strips are all north-look, with ground-range display, and 60% overlap. The interpretation was compiled on a 1/100,000-scale mosaic, but the actual mapping of contacts, dips, lineaments, and the like, was done on 1/100,000-scale stereo-strips. Initial regional mapping was intended as an aid in determining that part of the Southern Trough most likely to be underlain by relatively unmetamorphosed paralic Kembelangan sandstones ideally interdigitated with marine source and cape shales. SLAR reconnaissance mapping met a subsequent need to rapidly and inexpensively narrow the search to that part of the "fairway' coincident with a favorable structure. The SLAR mosaic clearly displays the Irian mountains, strongly and gently folded foothills belts, and the southern front of the fold belt south of which is a large complex of alluvial fans.

Wing, R. S.↗
NASA NTRS1976

Application of the aerodynamic energy concept to flutter suppression and gust alleviation by use of active controls

The effects of active controls on flutter suppression and gust alleviation of the Arava twin turboprop STOL transport and the Westwind twinjet business transport are investigated. The active control surfaces are introduced in pairs which include, in any chosen wing strip, a 20-percent chord leading-edge control and a 20-percent chord trailing-edge control. Each control surface is driven by a combined linear-rotational sensor system located on the activated strip. The control law is based on the concept of aerodynamic energy and utilizes previously optimized control law parameters based on two-dimensional aerodynamic theory. The best locations of the activated system along the span of the wing are determined for bending-moment alleviation, reduction in fuselage accelerations, and flutter suppression. The effectiveness of the activated system over a wide range of maximum control deflections is also determined. Two control laws are investigated. The first control law utilizes both rigid-body and elastic contributions of the motion. The second control law employs primarily the elastic contribution of the wing and leads to large increases in the activated control effectiveness as compared with the basic control law. The results indicate that flutter speed can be significantly increased (over 70 percent increase) and that the bending moment due to gust loading can be almost totally eliminated by a control system of about 10 to 20 percent span with reasonable control-surface rotations.

Nissim, E.↗
NASA NTRS1976

Remote sensing application to regional activities

Two agencies within the State of Tennessee were identified whereby the transfer of aerospace technology, namely remote sensing, could be applied to their stated problem areas. Their stated problem areas are wetland and land classification and strip mining studies. In both studies, LANDSAT data was analyzed with the UTSI video-input analog/digital automatic analysis and classification facility. In the West Tennessee area three land-use classifications could be distinguished; cropland, wetland, and forest. In the East Tennessee study area, measurements were submitted to statistical tests which verified the significant differences due to natural terrain, stripped areas, various stages of reclamation, water, etc. Classifications for both studies were output in the form of maps of symbols and varying shades of gray.

Shahrokhi, F.↗
NASA NTRS1976

A radar study of the backup Martian landing sites

The Goldstone radar system at DSS 14 was used to probe the Martian surface at 8495 MHz in a narrow strip between -6 deg and -2 deg latitude. The Viking C landing sites lie in this strip, and their altitudes, rms surface slope, and reflectivity are presented.

Downs, G. S.↗
NASA NTRS1977

Application of LANDSAT-2 data to the implementation and enforcement of the Pennsylvania Surface Mining Conservation and Reclamation Act

The author has identified the following significant results. Evaluation of LANDSAT imagery indicates severe limitations in its utility for surface mine land studies. Image stripping resulting from unequal detector response on satellite degrades the image quality to the extent that images of scales larger than 1:125,000 are of limited value for manual interpretation. Computer processing of LANDSAT data to improve image quality is essential; the removal of scanline stripping and enhancement of mine land reflectance data combined with color composite printing permits useful photographic enlargements to approximately 1:60,000.

Russell, O. R.↗
NASA NTRS1976

The shear-stress intensity factor for a centrally cracked stiff-flanged shear web

By use of the principle of superposition the stiff-flanged shear web is modeled mathematically by an infinite elastic strip with fixed longitudinal edges. The shear-stress intensity factor for a central longitudinal crack is calculated for various values of the ratio of strip width to crack length, h/a, in the range 0.1-10. The interaction of the crack with the boundaries is illustrated by boundary shear-stress distributions for three values of h/a. Some implications of the results for the design of damage-tolerant shear webs are discussed briefly.

Fichter, W. B.↗
NASA NTRS1977

Ionization induced damage in crystalline silicon

Close examination of the interaction of the energetic knock-on atoms with the local lattice environment reveals a damage mechanism which does satisfy the experimental data on proton irradiation of silicon. A proton-atom interaction with high energy transfer is considered where the proton path is delineated by a trail of ionization, and the silicon ion path is characterized by much heavier ionization terminating in a dense displacement cluster. At collision, many of the silicon electrons are stripped off, and the resulting energetic ion subsequently loses energy rapidly by Coulomb interaction with bound electrons. The rate of energy loss depends on the charge state and velocity of the knock-on ion. For ion energies in excess of 1 MeV, the intensity of ionization is sufficient to permit lattice atoms, stripped of their binding electrons, to reorient randomly before having an opportunity to recombine with electrons and re-establish the lattice. The path of a knock-on ion thus becomes a thin cylinder of amorphous material within the crystal. Amorphous silicon has a Fermi level closer to mid-band than does single crystal silicon, and a strong field therefore, results around this damaged region. The field produces a large depletion region, representing a very large capture cross section for minority carriers.

Meulenberg, A., Jr.↗
NASA NTRS1977

A pressurized gas squeeze film journal damper

A lumped parameter model is developed to determine the stiffness and damping characteristics of inherently compensated gas film bearings. The model relies on the average static pressure over a one dimensional strip bearing. Results of the model are compared with known computer solutions for the distributed strip and a two dimensional square bearing. The results for the stiffness agree well with the computer solutions although the model proved to be inadequate for predicting the film damping.

Stiffler, A. K.↗
NASA NTRS1977

Composite lamination method

A process was developed for preparing relatively thick composite laminate structure wherein thin layers of prepreg tapes are assembled, these thin layers are cut into strips that are partially cured, and stacked into the desired thickness with uncured prepreg disposed between each layer of strips. The formed laminate is finally cured and thereafter machined to the desired final dimensions.

Dickerson, G. E.↗
NASA NTRS1977

Stress-free end problem in layered materials

In this paper the plane elastostatic problem for a medium which consists of periodically arranged two sets of bonded dissimilar layers or strips is considered. First it is assumed that one set of strips contains a crack which crosses the bimaterial interfaces. Then, by letting the collinear cracks join, the stress-free end problem is formulated. The singular behavior of the solutions at the point on intersection of the stress-free boundary and the interfaces is examined and appropriate stress intensity factors are defined. The results of some numerical examples are then presented which include the cases of both plane stress and plane strain.

Erdogan, F.↗
NASA NTRS1977

Generation of a parallel X-ray beam and its use for testing collimators

A technique is described, by which a glass strip may be bent to match any curve of large radius of curvature, to a high degree of accuracy, so that it may be used as a glancing incidence X-ray or extreme ultraviolet optical element. The desired match is obtained by applying the optimum combination of end couples and by varying the cross-sectional moment of inertia along the length of the strip. A particular case, that of a parabola for use as a laboratory X-ray collimator, is considered in detail. The analysis predicts that a collimation of one or two arc seconds should be obtainable in practice, with simple and inexpensive apparatus. A prototype collimator to be used for the testing of space payloads using geometric (McGrath) collimators is described and laboratory results presented.

Underwood, J. H.↗
NASA NTRS1978

An integral solution to a nonlinear diffusion problem

The generalized Galerkin method (or the method of integral relations) is applied to the type of problem described by quasilinear parabolic equations. As an example the problem of nonlinear transient slab diffusion with a general reservoir boundary condition is worked out. The integral relations are given for an arbitrary number of strips, and solutions using up to seven strips have been obtained in order to investigate the convergence of the method.

Hussaini, M. Y.↗
NASA NTRS1978

Multichannel electrochemical microbial detection unit

The paper describes the design and capabilities of a compact multichannel electrochemical unit devised to detect and automatically indicate detection time length of bacteria. By connecting this unit to a strip-chart recorder, a permanent record is obtained of the end points and growth curves for each of eight channels. The experimental setup utilizing the multichannel unit consists of a test tube (25 by 150 mm) containing a combination redox electrode plus 18 ml of lauryl tryptose broth and positioned in a 35-C water bath. Leads from the electrodes are connected to the multichannel unit, which in turn is connected to a strip-chart recorder. After addition of 2.0 ml of inoculum to the test tubes, depression of the push-button starter activates the electronics, timer, and indicator light for each channel. The multichannel unit is employed to test tenfold dilutions of various members of the Enterobacteriaceae group, and a typical dose-response curve is presented.

Wilkins, J. R.↗
NASA NTRS1977

Bent glass optics

The paper describes how a glass strip may be bent to match any curve of large radius of curvature, to a high degree of accuracy, so that it may be used as a glancing incidence X-ray or extreme ultraviolet optical element. The desired match is obtained by applying a suitable combination of end couples and adjusting the cross-sectional moment of inertia along the length of the strip by varying its breadth. Two applications are described; a parabolic reflector for use as a laboratory X-ray collimator for testing mechanical collimators to be used in space instruments, and an elliptical reflector for point-to-point focussing. The latter device has been used for testing gratings in the X-ray and extreme ultraviolet (EUV) regions and for concentrating radiation on the entrance slit of a spectrometer, with a resultant gain in speed and resolution. It is suggested that the technique may have other laboratory and space applications, which are briefly described.

Underwood, J. H.↗
NASA NTRS1978

Lightning current detector

An apparatus for measuring the intensity of current produced in an elongated electrical conductive member by a lightning strike for determining the intensity of the lightning strike is presented. The apparatus includes an elongated strip of magnetic material that is carried within an elongated tubular housing. A predetermined electrical signal is recorded along the length of said elongated strip of magnetic material. One end of the magnetic material is positioned closely adjacent to the electrically conductive member so that the magnetic field produced by current flowing through said electrically conductive member disturbs a portion of the recorded electrical signal directly proportional to the intensity of the lightning strike.

Livermore, S. F.↗
NASA NTRS1979

Direct current transformer

A direct current transformer in which the primary consists of an elongated strip of superconductive material, across the ends of which is direct current potential is described. Parallel and closely spaced to the primary is positioned a transformer secondary consisting of a thin strip of magnetoresistive material.

Khanna, S. M.↗
NASA NTRS1979

Stress-concentration factors for finite orthotropic laminates with a circular hole and uniaxial loading

Stresses were calculated for finite-width orthotropic laminates with a circular hole and remote uniaxial loading using a two-dimensional finite element analysis with both uniform stress and uniform displacement boundary conditions. Five different laminates were analyzed. Computed results are presented for selected combinations of hole diameter/sheet-width ratio d/w and length-to-width ratio L/w. For small L/w values, the stress-concentration factors K sub tn were significantly different for the uniform stress and uniform displacement boundary conditions. Typically, for the uniform stress condition, the K sub tn values were much larger than for the infinite strip reference condition; however, for the uniform displacement condition, they were only slightly smaller than for this reference. The results for long strips are also presented as width correction factors. For d/w less or = 0.33, these width correction factors are nearly equal for all five laminates.

Hong, C. S.↗