Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sampling error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Hybrid Gibbs Sampling and MCMC for CMB Analysis at Small Angular Scales

A) Gibbs Sampling has now been validated as an efficient, statistically exact, and practically useful method for "low-L" (as demonstrated on WMAP temperature polarization data). B) We are extending Gibbs sampling to directly propagate uncertainties in both foreground and instrument models to total uncertainty in cosmological parameters for the entire range of angular scales relevant for Planck. C) Made possible by inclusion of foreground model parameters in Gibbs sampling and hybrid MCMC and Gibbs sampling for the low signal to noise (high-L) regime. D) Future items to be included in the Bayesian framework include: 1) Integration with Hybrid Likelihood (or posterior) code for cosmological parameters; 2) Include other uncertainties in instrumental systematics? (I.e. beam uncertainties, noise estimation, calibration errors, other).

Gibbs sampling↗
DOE OSTI2025

LABQ3: Bayesian method for quantification of mineral compositions and nano-scale elemental mapping of 3D synchrotron XCT data

Quantitative analysis of mineral compositions is essential in understanding geochemical, mineralogical and environmental processes. Fine-resolution 3D imaging is widely done using synchrotron X-ray computed tomography (XCT), but existing analyses are limited to visualization and segmentation. This paper presents a new method, Linear Attenuation Bayesian Quantitative 3D-mapper (LABQ3), based on the linearity of X-ray attenuation with respect to elemental concentrations. To address the random variability in attenuation measurements, LABQ3 employs Bayesian decision theory to minimize classification error, using reference attenuation distributions from scans of pure mineral standards. To demonstrate LABQ3 and test its performance, we studied precipitated carbonate samples. XCT scans were done at multiple energies using the transmission X-ray microscope (TXM) at beamline 32-ID-C of the Advanced Photon Source at Argonne National Laboratory. The reconstructed 3D images have a voxel size of 20 nm. Analyses revealed rich nano-scale compositional heterogeneity within individual particles. A mixture of calcium and cadmium produced an overall stoichiometric composition of (Ca 0.78 ,Cd 0.22 )CO 3 , with some voxels containing nearly pure CdCO 3 . The addition of zinc led to an overall stoichiometric composition of 33% Ca, 28% Cd, 39% Zn, with a nearly pure CaCO 3 core and compositional zonation through the rim. These compositional gradients are related to temporal sequences of carbonate mineral formation where Cd precipitated at the beginning in (Ca,Cd)CO 3 , while Cd and Zn precipitated at the end in (Ca, Cd,Zn)CO 3 . Results differ from bulk analyses using Inductively Coupled Plasma-Mass Spectrometry (ICP-MS), showing that LABQ3 provides particle-specific insights. LABQ3 distinguishes itself by quantifying chemical compositions along a continuum, making it different from XCT analyses based on segmentation. LABQ3 allows simultaneous acquisition of morphology and chemical composition in 3D, facilitating the interpretation of chemical gradients of trace elements, quantification of solid solution compositions, inferences about temporal sequences of mineral precipitation, and addressing other concerns about solid-phase chemistry.

58 GEOSCIENCES↗
DOE OSTI2020

Multiscale formulation of frictional contact mechanics at the pore scale

Direct numerical simulation (DNS) yields the highest fidelity predictions of mechanical deformation at the pore scale, but is prohibitively expensive for analyzing large or many samples. Discrete element methods (DEM) are an efficient alternative, but are limited to granular media and incapable of estimating or controlling prediction errors. We present a pore-level multiscale method (PLMM) that approximates DNS efficiently and with controllable accuracy. We focus on the linear elastic response of a consolidated geologic porous medium with arbitrary microstructure, heterogeneous mineralogy, containing cracks or defects. PLMM decomposes the solid phase into non-overlapping subdomains, on which local basis functions are constructed. The bases are then coupled with a global interface problem that accounts for slip or stick contact conditions between the subdomains. PLMM produces an initial, but accurate, approximation to DNS that can be iteratively improved. It is amenable to parallelism and allows for different mesh, models, and physics in each subdomain. An algebraic interpretation of PLMM as a preconditioner is also presented to allow non-intrusive implementation into existing solvers. Lastly, this work extends previous developments of PLMM in fluid dynamics to solid mechanics and enables future extensions towards modeling coupled flow and mechanics problems.

42 ENGINEERING↗
DOE OSTI2021

Simulation of adiabatic quantum computing for molecular ground states

Quantum computation promises to provide substantial speedups in many practical applications with a particularly exciting one being the simulation of quantum many-body systems. Adiabatic state preparation (ASP) is one way that quantum computers could recreate and simulate the ground state of a physical system. In this paper, we explore a novel approach for classically simulating the time dynamics of ASP with high accuracy and with only modest computational resources via an adaptive sampling configuration interaction scheme for truncating the Hilbert space to only the most important determinants. We verify that this truncation introduces negligible error and use this new approach to simulate ASP for sets of small molecular systems and Hubbard models. Furthermore, we examine two approaches to speeding up ASP when performed on quantum hardware: (i) using the complete active space configuration interaction (CASCI) wave function instead of the Hartree–Fock initial state and (ii) a nonlinear interpolation between the initial and target Hamiltonians. We find that starting with a CASCI wave function with a limited active space yields substantial speedups for many of the systems examined, while nonlinear interpolation does not. In additional, we observe interesting trends in the minimum gap location (based on the initial state) as well as how state preparation time can depend on certain molecular properties, such as the number of valence electrons. Importantly, we find that the required state preparation times do not show an immediate exponential wall that would preclude an efficient run of ASP on actual hardware.

Kremenetski, Vladimir↗
DOE OSTI2022

A cosine-based correlation information entropy approach for building automatic fault detection baseline construction

Building automatic fault detection and diagnosis (AFDD) technologies have shown great potential for energy savings. To enable AFDD, a baseline depicting the normal operation mode is needed to detect whether the building operation deviates from normality. Existing research using physics-based knowledge and models for AFDD has mainly taken a trial-and-error approach to determine if a given baseline is sufficient via empirical experiments. A mechanism to support decisions such as how many samples and what samples should be included in the baseline is currently lacking. In this study, a data-driven method for AFDD baseline construction based on information entropy is developed. The entropy is derived based on cosine similarity among typical building automation system measurements in conjunction with outdoor weather information. The performance of the proposed method is evaluated using real building data. Evaluation results indicate that the fault detection strategy adopting the proposed method has similar or better accuracy in detecting faults compared to the same fault detection strategy using the baseline construction method from the literature. Additionally, the use of entropy enables the proposed method to automatically construct and assess the baseline consisting of information-rich samples.

42 ENGINEERING↗
DOE OSTI2018

Non-Invasive Acoustic-Based Monitoring of Heavy Water

There is a need for real-time process monitoring and person-portable in-field tools for the determination of the hydrogen /deuterium ratio (H/D) in heavy water production facilities. Current methods for H/D determination require periodic sampling and analysis. This approach does not provide the opportunity for continuous monitoring and verification by the IAEA and is relatively expensive, error prone and inefficient.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Super Resolution for Renewable Energy Resource Data With Wind From Reanalysis Data (Sup3rWind) and Application to Ukraine [Slides]

In this work we present a novel deep learning-based downscaling method, using generative adversarial networks (GANs), for generating high-resolution wind resource data from ECMWF Reanalysis v5 data (ERA5). We show that by training a GAN model on ERA5, as opposed to coarsened high-resolution data, we achieve results that are competitive with conventional dynamical downscaling. This GAN-based downscaling method additionally reduces computational costs over dynamical downscaling by two orders of magnitude. All GANs are trained on data sampled from CONUS, selected to provide a diverse sampling of terrain conditions, and validated on observational data along with data held out from training. This cross-validation shows low error and high correlations with observations and excellent agreement with hold out data across physical distributions. Our approach is finally used to downscale 30km hourly ERA5 to 2-km 5-minute wind data, for January 2000 through December 2023, at multiple hub heights, over Ukraine, Moldova, and part of Romania. Comparisons against observational data from Meteorological Assimilation Data Ingest System (MADIS) and multiple wind farms show the same level of performance as for CONUS validation. This 24 year data record is the first member of the "super resolution for renewable energy resource data with wind from reanalysis data" dataset (Sup3rWind).

17 WIND ENERGY↗
NASA NTRS1979

A structure for digital notch filters

Narrow-band digital notch filters have their poles near the unit circle. As the sampling rate is increased, the poles move towards Z = +1. Implementing such filters requires long registers to overcome the sensitivity and roundoff errors. A filter structure based on digital incremental computers is proposed which has low sensitivity and round-off errors, and simple hardware implementation. The filter structure can be directly used on differentially pulse-code modulated signals. Hardware multipliers are not required as the poles approach z = +1, and excellent results can be obtained using multipliers with very short word lengths, or with small size read-only memories.

Abu-El-haija, A. I.↗
NASA NTRS1980

The HEAO A-2 survey of Abell clusters and the X-ray luminosity function

The HEAO A-2 all sky data base was surveyed for 2-10KeV X-rau emission from the 225 Abell clusters og galaxies listed in Abell's (1958) catalog which are of distance class four or less, and are within the fraction of the sky surveyed completely by Abell. Thirty-two identifications of clusters with X-ray sources were made, for which 2-10 KeV fluxes and 90% error boxes are presented. Twelve of these identification are new. The X-ray luminosity function was derived for this statistically complete sample and the best exponential fit was found to be f(L) = 20.2 x 10 to the minus 8 power exp (-l(44)/1.9) per cu Mpc 2-10KeV. The relationship between X-ray luminosity and richness was examined and a correlation was found for richness classes 0, 1, and 2. The relationship of X-rau luminosity, Bautz-Morgan type, and Rood-Sastry type was examined. It was found that BM type I's and RS type cD and B have the greatest average luminosity. The contribution of clusters to the X-ray background was calculated from the luminosity function and was found to be 5%, and with 90% certainty, less than 8% in the 2-10 KeV band pass.

Mckee, J. D.↗
NASA NTRS1993

Spatial averaging errors in creating hemispherical reflectance (albedo) maps from directional reflectance data

Spatial averaging errors which may occur when creating hemispherical reflectance maps for different cover types from direct nadir technique to estimate the hemispherical reflectance are assessed by comparing the results with those obtained with a knowledge-based system called VEG (Kimes et al., 1991, 1992). It was found that hemispherical reflectance errors provided by using VEG are much less than those using the direct nadir techniques, depending on conditions. Suggestions are made concerning sampling and averaging strategies for creating hemispherical reflectance maps for photosynthetic, carbon cycle, and climate change studies.

Kimes, D. S.↗
NASA NTRS1993

Parametric binary dissection

Binary dissection is widely used to partition non-uniform domains over parallel computers. This algorithm does not consider the perimeter, surface area, or aspect ratio of the regions being generated and can yield decompositions that have poor communication to computation ratio. Parametric Binary Dissection (PBD) is a new algorithm in which each cut is chosen to minimize load + lambda x(shape). In a 2 (or 3) dimensional problem, load is the amount of computation to be performed in a subregion and shape could refer to the perimeter (respectively surface) of that subregion. Shape is a measure of communication overhead and the parameter permits us to trade off load imbalance against communication overhead. When A is zero, the algorithm reduces to plain binary dissection. This algorithm can be used to partition graphs embedded in 2 or 3-d. Load is the number of nodes in a subregion, shape the number of edges that leave that subregion, and lambda the ratio of time to communicate over an edge to the time to compute at a node. An algorithm is presented that finds the depth d parametric dissection of an embedded graph with n vertices and e edges in O(max(n log n, de)) time, which is an improvement over the O(dn log n) time of plain binary dissection. Parallel versions of this algorithm are also presented; the best of these requires O((n/p) log(sup 3)p) time on a p processor hypercube, assuming graphs of bounded degree. How PBD is applied to 3-d unstructured meshes and yields partitions that are better than those obtained by plain dissection is described. Its application to the color image quantization problem is also discussed, in which samples in a high-resolution color space are mapped onto a lower resolution space in a way that minimizes the color error.

Bokhari, Shahid H.↗
NASA NTRS1995

An empirical determination of the polytropic index for the free-streaming solar wind using Helios 1 data

Observations of solar wind proton temperatures indicate that the solar wind is heated as it moves outward toward the orbit of Earth. This heating, which may be the results of electron heat conduction and perhaps MHD waves, has proven difficult to quantify and hence is often neglected in MHD models of the solar wind. An alternate approach to finding explicit heating terms for the MHD energy equation is to use a polytropic approximation. This paper discusses the properties of the polytropic approximation and its application to the solar wind plasma. By using data from the Helios 1 spacecraft, an empirical value for the polytropic index of the free-streaming solar wind is determined. Various corrections to the data are made to account for velocity, nonuniformity in radial sampling, and stream interaction regions. The polytropic index, as derived from proton data, is found to indepedent of speed state, within statistical error, and has an average value of 1.46. If magnetic pressure is included, the polytropic index has an average value of 1.58.

Totten, T. L.↗
NASA NTRS1998

Galaxy Cluster Shapes and Systematic Errors in the Hubble Constant as Determined by the Sunyaev-Zel'dovich Effect

Imaging of the Sunyaev-Zei'dovich (S-Z) effect in galaxy clusters combined with the cluster plasma x-ray diagnostics can measure the cosmic distance scale to high accuracy. However, projecting the inverse-Compton scattering and x-ray emission along the cluster line-of-sight will introduce systematic errors in the Hubble constant, H$-O$, because the true shape of the cluster is not known. This effect remains present for clusters that are otherwise chosen to avoid complications for the S-Z and x-ray analysis, such as plasma temperature variations, cluster substructure, or cluster dynamical evolution. In this paper we present a study of the systematic errors in the value of H$-0$, as determined by the x-ray and S-Z properties of a theoretical sample of triaxial isothermal 'beta-model' clusters, caused by projection effects and observer orientation relative to the model clusters' principal axes. The model clusters are not generated as ellipsoids of rotation, but have three independent 'core radii', as well as a random orientation to the plane of the sky.

Sulkanen, Martin E.↗
NASA NTRS1997

Quality Issues in Propulsion

Propulsion system quality is defined in this paper as having high reliability, that is, quality is a high probability of within-tolerance performance or operation. Since failures are out-of-tolerance performance, the probability of failures and their occurrence is the difference between high and low quality systems. Failures can be described at 3 levels: the system failure (which is the detectable end of a failure), the failure mode (which is the failure process), and the failure cause (which is the start). Failure causes can be evaluated & classified by type. The results of typing flight history failures shows that most failures are in unrecognized modes and result from human error or noise, i.e. failures are when engineers learn how things really work. Although the study based on US launch vehicles, a sampling of failures from other countries indicates the finding has broad application. The parameters of the design of a propulsion system are not single valued, but have dispersions associated with the manufacturing of parts. Many tests are needed to find failures, if the dispersions are large relative to tolerances, which could contribute to the large number of failures in unrecognized modes.

McCarty, John P.↗
NASA NTRS2001

A Sensitive Technique Using Atomic Force Microscopy to Measure the Low Earth Orbit Atomic Oxygen Erosion of Polymers

Polymers such as polyimide Kapton and Teflon FEP (fluorinated ethylene propylene) are commonly used spacecraft materials due to their desirable properties such as flexibility, low density, and in the case of FEP low solar absorptance and high thermal emittance. Polymers on the exterior of spacecraft in the low Earth orbit (LEO) environment are exposed to energetic atomic oxygen. Atomic oxygen erosion of polymers occurs in LEO and is a threat to spacecraft durability. It is therefore important to understand the atomic oxygen erosion yield (E, the volume loss per incident oxygen atom) of polymers being considered in spacecraft design. Because long-term space exposure data is rare and very costly, short-term exposures such as on the shuttle are often relied upon for atomic oxygen erosion determination. The most common technique for determining E is through mass loss measurements. For limited duration exposure experiments, such as shuttle experiments, the atomic oxygen fluence is often so small that mass loss measurements can not produce acceptable uncertainties. Therefore, a recession measurement technique has been developed using selective protection of polymer samples, combined with postflight atomic force microscopy (AFM) analysis, to obtain accurate erosion yields of polymers exposed to low atomic oxygen fluences. This paper discusses the procedures used for this recession depth technique along with relevant characterization issues. In particular, a polymer is salt-sprayed prior to flight, then the salt is washed off postflight and AFM is used to determine the erosion depth from the protected plateau. A small sample was salt-sprayed for AFM erosion depth analysis and flown as part of the Limited Duration Candidate Exposure (LDCE-4,-5) shuttle flight experiment on STS-51. This sample was used to study issues such as use of contact versus non-contact mode imaging for determining recession depth measurements. Error analyses were conducted and the percent probable error in the erosion yield when obtained by the mass loss and recession depth techniques has been compared. The recession depth technique is planned to be used to determine the erosion yield of 42 different polymers in the shuttle flight experiment PEACE (Polymer Erosion And Contamination Experiment) planned to fly in 2002 or 2003.

deGroh, Kim K.↗
NASA NTRS2018

Performance Analysis of Airborne Photon-Counting Lidar Data in Preparation for the ICESat-2 Mission

Two airborne photon-counting laser altimeters have been deployed in direct support of National Aeronautics and Space Adminsitration (NASA's) upcoming Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) mission. Multiple Altimeter Beam Experimental Lidar (MABEL) was developed specifically for ICESat-2 testing and development. MABEL data are used to simulate key aspects of the ICESat-2 measurement strategy and are critical to the development of the algorithms for geophysical data-product generation. Slope Imaging Multipolarization Photon-counting Lidar (SIMPL) is a NASA Goddard Space Flight Center instrument that has also been deployed in support of ICESat-2 performance discovery. Both instruments are photon-counting, small footprint laser altimeters that sample in both the 532- and 1064-nm wavelengths. And both instruments serve as a proxy for ICESat-2 operational performance and error assessment and a basis for the development of potential validation strategies. This paper provides an overview of how data from MABEL and SIMPL overflights have specifically provided the foundation for understanding the quality of ICESat-2 data and how we can plan to evaluate ICESat-2 products through comparison with other modalities of lidar data and/or groundtruth locations using ground fiducials.

MABEL↗
NASA NTRSDate not supplied

Infusing Statistical Thinking into the NASA Quesst Community Test Campaign

Statistical thinking permeates many important decisions as NASA plans its Quesst mission, which will culminate in a series of community overflights using the X-59 aircraft to demonstrate low-noise supersonic flight. Month-long longitudinal surveys will be deployed to assess human perception and annoyance to this new acoustic phenomenon. NASA works with a large contractor team to develop systems and methodologies to estimate noise doses, to test and field socio-acoustic surveys, and to study the relationship between the two quantities, dose and response, through appropriate choices of statistical models. This latter dose-response relationship will serve as an important tool as national and international noise regulators debate whether overland supersonic flights could be permitted once again within permissible noise limits. In this presentation we highlight several areas where statistical thinking has come into play, including issues of sampling, classification and data fusion, and analysis of longitudinal survey data that are subject to rare events and the consequences of measurement error. We note several operational constraints that shape the appeal or feasibility of some decisions on statistical approaches, and we identify several important remaining questions to be addressed.

Bayesian model↗
NASA NTRS1995

EUV emission from a sample of Active Galactic Nuclei

Active Galactic Nuclei (AGN) emit a substantial fraction of their total radiated power in the EUV passband, because spectroscopically this band is situated at or near the peak of the 'big blue bump,' which is bounded on either side by the UV and soft X-ray excesses. Owing to the lack of observational data, the shape of AGN spectra in the EUV is not well known. This paper presents broad band (65-190 eV) count rates of 11 AGN detected by the Extreme Ultraviolet Explorer (EUVE). Assuming a power law spectral shape for the EUV and soft X-ray energies, we demonstrate that the photon indices of the sources are considerably steeper than typical AGN indices. For 6 sources where ROSAT data are available to provide a more precise determination of their spectral parameters in the 0.1-2.5 keV range, we have used these parameters to compute predicted EUVE count rates and compared them with the observed values. The two sets of quantities agree to within experimental error. We conclude that there is no evidence of spectral steepening or turn-over of the soft X-ray excess at EUV wavelengths for a sample of AGN which covers a wide range of brightness.

Lieu, R.↗