Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural Effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Effects of Surgery and Proton Therapy on Cerebral White Matter of Craniopharyngioma Patients

Purpose: The purpose of this study was to determine radiation dose effect on the structural integrity of cerebral white matter in craniopharyngioma patients receiving surgery and proton therapy. Methods and Materials: Fifty-one patients (2.1-19.3 years of age) with craniopharyngioma underwent surgery and proton therapy in a prospective therapeutic trial. Anatomical magnetic resonance images acquired after surgery but before proton therapy were inspected to identify white matter structures intersected by surgical corridors and catheter tracks. Longitudinal diffusion tensor imaging (DTI) was performed to measure microstructural integrity changes in cerebral white matter. Fractional anisotropy (FA) derived from DTI was statistically analyzed for 51 atlas-based white matter structures of the brain to determine radiation dose effect. FA in surgery-affected regions in the corpus callosum was compared to that in its intact counterpart to determine whether surgical defects affect radiation dose effect. Results: Surgical defects were seen most frequently in the corpus callosum because of transcallosal resection of tumors and insertion of ventricular or cyst catheters. Longitudinal DTI data indicated reductions in FA 3 months after therapy, which was followed by a recovery in most white matter structures. A greater FA reduction was correlated with a higher radiation dose in 20 white matter structures, indicating a radiation dose effect. The average FA in the surgery-affected regions before proton therapy was smaller (P=.0001) than that in their non–surgery-affected counterparts with more intensified subsequent reduction of FA (P=.0083) after therapy, suggesting that surgery accentuated the radiation dose effect. Conclusions: DTI data suggest that mild radiation dose effects occur in patients with craniopharyngioma receiving surgery and proton therapy. Surgical defects present at the time of proton therapy appear to accentuate the radiation dose effect longitudinally. This study supports consideration of pre-existing surgical defects and their locations in proton therapy planning and studies of treatment effect.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Effective Dose Reduction to Cardiac Structures Using Protons Compared With 3DCRT and IMRT in Mediastinal Hodgkin Lymphoma

Purpose: We investigated the dosimetric impact of proton therapy (PT) on various cardiac subunits in patients with Hodgkin lymphoma (HL). Methods and Materials: From June 2009 through December 2010, 13 patients were enrolled on an institutional review board-approved protocol for consolidative involved-node radiotherapy (INRT) for HL. Three separate treatment plans were developed prospectively by using three-dimensional conformal radiotherapy (3DCRT), intensity-modulated radiotherapy (IMRT), and PT. Cardiac subunits were retrospectively contoured on the 11 patients with intravenous-contrast simulation scans, and the doses were calculated for all treatment plans. A Wilcoxon paired test was performed to evaluate the statistical significance (p < 0.05) of 3DCRT and IMRT compared with PT. Results: The mean heart doses were 21 Gy, 12 Gy, and 8 Gy (relative biologic effectiveness [RBE]) with 3DCRT, IMRT, and PT, respectively. Compared with 3DCRT and IMRT, PT reduced the mean doses to the left and right atria; the left and right ventricles; the aortic, mitral, and tricuspid valves; and the left anterior descending, left circumflex, and right circumflex coronary arteries. Conclusions: Compared with 3DCRT and IMRT, PT reduced the radiation doses to all major cardiac subunits. Limiting the doses to these structures should translate into lower rates of cardiac toxicities.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Dynamic versus Static Structure Functions and Novel Diffractive Effects in QCD

Initial- and final-state rescattering, neglected in the parton model, have a profound effect in QCD hard-scattering reactions, predicting single-spin asymmetries, diffractive deep inelastic scattering, diffractive hard hadronic reactions, the breakdown of the Lam Tung relation in Drell-Yan reactions, and nuclear shadowing and non-universal antishadowing--leading-twist physics not incorporated in the light-front wavefunctions of the target computed in isolation. I also discuss the use of diffraction to materialize the Fock states of a hadronic projectile and test QCD color transparency, and anomalous heavy quark effects. The presence of direct higher-twist processes where a proton is produced in the hard subprocess can explain the large proton-to-pion ratio seen in high centrality heavy ion collisions. I emphasize the importance of distinguishing between static observables such as the probability distributions computed from the square of the light-front wavefunctions versus dynamical observables which include the effects of rescattering.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Solid-State Nuclear Magnetic Resonance as a Tool to Probe the Impact of Mechanical Preprocessing on the Structure and Arrangement of Plant Cell Wall Polymers

Efficient separation of the plant cell wall polymers during lignocellulose processing has been historically challenging due to insolubility of the polymers and their propensity for recalcitrant reassembly. Methods, such as “lignin first” extraction techniques, have advanced efficient biomass use, but the molecular mechanisms for recalcitrance remain enigmatic. Here, we discuss how solid-state Nuclear Magnetic Resonance (NMR) approaches report on the 3D organization of cellulose, xylan, and lignin in the plant cell wall. Recent results illustrate that the organization of these polymers varies across biomass sources and sample preparation methods, with even minimal physical processing causing significant effects. These structural differences contribute to variable extraction efficiencies for bioproducts after downstream processing. We propose that solid-state NMR methods can be applied to follow biomass processing, providing an understanding of the polymer rearrangements that can lead to poor yields for the desired bioproducts. The utility of the technique is illustrated for mechanical processing using lab-scale vibratory ball milling of Sorghum bicolor .

59 BASIC BIOLOGICAL SCIENCES↗

Lewis Acid Doping Induced Synergistic Effects on Electronic and Morphological Structure for Donor and Acceptor in Polymer Solar Cells

Abstract Due to the attraction of optimizing the electronic structure beyond chemical synthesis, molecular doping has recently aroused wide interest in the field of organic solar cells. However, the selection of limited dopants confines its successful application. Inspired by the Lewis base characteristics of the photovoltaic materials, the Lewis acid as novel dopant is introduced in organic solar cells. In both fullerene and nonfullerene based blends, Lewis acid doping leads to increased photovoltaic performance. Detailed experiments reveal that Lewis acid doping has a synergistic effect on modifying the polymer's electronic properties and the acceptor's nanostructure even at low doping concentration, and these are simultaneously responsible for the device improvements. Based on the mechanism studies, it is proposed that the Lewis acid‐doped polymers anions produce induced dipole on the acceptor, this increases the intermolecular interaction and facilitates the morphology optimization. It is believed that the synergistic effect by Lewis acid doping greatly expands the application of doped organic solar cells, in concert with other existing methods to yield higher efficiency values.

Yan, Han↗

Repulsively bound exciton-biexciton states in high-spin fermions in optical lattices

We show that the interplay between spin-changing collisions and quadratic Zeeman coupling provides a mechanism for the formation of repulsively bound composites in high-spin fermions, which we illustrate by considering spin flips in an initially polarized hard-core one-dimensional Mott insulator of spin-3/2 fermions. We show that after the flips the dynamics is characterized by the creation of two types of exciton-biexciton composites. We analyze the conditions for the existence of these bound states and discuss their intriguing properties. In particular we show that the effective mass and stability of the composites depends nontrivially on spin-changing collisions, on the quadratic Zeeman effect, and on the initial exciton localization. Finally, we show that the composites may remain stable against inelastic collisions, opening the possibility of interesting quantum composite phases.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Biosynthesis of Minimal C-Phycocyanin Chromophore Assemblies in E. coli Provides a Platform to Dissect Protein-Mediated Tuning of Exciton Transfer

Cyanobacteria are arguably among the most evolutionarily successful organisms on Earth, inhabiting a wide range of ocean, freshwater, soil, and even desert environments on every continent. The cyanobacterial phycobilisome consists of stacks of disk-like light-collecting moieties, allophycocyanin (APC) and phycocyanin (CPC), with covalently bound phycocyanobilin (PCB) pigments. The ways in which the energies of the specific chromophores in these complexes are tuned by the protein to achieve its highly efficient and directional energy transfer are not fully understood, as complex combinations of decay pathways are occurring simultaneously and competitively through this elaborate light-harvesting system. This makes it difficult to extract information about isolated protein-pigment interactions. We provide herein a description of a useful new experimental platform in which we have recombinantly expressed a fully functioning CPC complex and selectively created minimal chromophore sets to study their individual contributions to the overall CPC spectra. Structural and computational analysis of this protein system have provided a greater understanding of how the protein environment serves to alter the photophysics of each of these chromophores. Introduction of a quencher into various positions within CPC confirmed the ability of the protein environment to tune the directionality of energy transport in this assembly. Further mutational analysis suggested the roles of key amino acids surrounding the chromophores, showcasing the utility of heterologous expression techniques for understanding the effects of structure on EET mechanisms in the phycobilisome.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of shape in near-field thermal transfer for periodic structures

In this paper, the effect of the geometrical shape on the radiative thermal transfer between a periodic array of beams and a planar substrate is investigated. Specifically, we analyze the changes in the thermal transfer that occur when the cross-sectional shape of SiC beams is modified from rectangular to ellipsoidal and finally triangular. Numerical calculations are done based on the rigorous coupled wave analysis. These exact results from this analysis are compared to modified proximity and far-field approximations, which become valid for small and large spacings, respectively. Moreover, these results are also compared to effective medium theory, which becomes increasingly accurate in the limit of small periodicities. We show that a reduction in the periodicity will lead to a reduced thermal transfer for triangular and ellipsoidal shaped beams. Even though, in the limit of very small periodicity, thermal transfer for the case of rectangular shaped beams also decreases by decreasing the periodicity, this decrease is slower as compared to other cross-sectional shapes. Lastly, we show that even though changing periodicity will change the magnitude of thermal transfer, the scaling law for its variation with the beam to substrate spacing is primarily determined by the cross-sectional shape rather than the periodicity. We analytically prove this fact by investigating the large and small periodicity regimes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Variation in superconducting transition temperature due to tetragonal domains in two-dimensionally doped SrTiO 3

Strontium titanate is a low-temperature, non-Bardeen-Cooper-Schrieffer superconductor that superconducts to carrier concentrations lower than in any other system and exhibits avoided ferroelectricity at low temperatures. Neither the mechanism of superconductivity in strontium titanate nor the importance of the structure and dielectric properties for the superconductivity are well understood. We studied the effects of twin structure on superconductivity in a 5.5-nm-thick layer of niobium-doped SrTiO3 embedded in undoped SrTiO3. We used a scanning superconducting quantum interference device susceptometer to image the local diamagnetic response of the sample as a function of temperature. We observed regions that exhibited a superconducting transition temperature T-c greater than or similar to 10% higher than the temperature at which the sample was fully superconducting. The pattern of these regions varied spatially in a manner characteristic of structural twin domains. Some regions are too wide to originate on twin boundaries; therefore, we propose that the orientation of the tetragonal unit cell with respect to the doped plane affects T-c. Our results suggest that the anisotropic dielectric properties of SrTiO3 are important for its superconductivity and need to be considered in any theory of the mechanism of the superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superconductivity at 31 K in the "111"-type iron arsenide superconductor Na[subscript 1−x] FeAs induced by pressure

The effect of pressure on the superconductivity of '111'-type Na{sub 1-x}FeAs is investigated through temperature-dependent electrical-resistance measurements in a diamond anvil cell. The superconducting transition temperature (T{sub c}) increases from 26 K to a maximum of 31 K as the pressure increases from ambient pressure to 3 GPa. Further increasing pressure suppresses T{sub c} drastically. The behavior of pressure-tuned T{sub c} in Na{sub 1-x}FeAs is much different from that in Li{sub x}FeAs, although they have the same Cu{sub 2}Sb-type structure.

36 MATERIALS SCIENCE↗

Imogolite in water: Simulating the effects of nanotube curvature on structure and dynamics

Imogolite is a fascinating inorganic nanotube that is found in nature or synthesized in a laboratory. The synthesis process is carried out in liquid media, and leads to the formation of almost monodisperse diameter nanotubes. Here we investigate, employing classical molecular dynamics simulations, the interaction of water and imogolite for nanotubes of several radii. We established that water penetrates the pores of N = 9 and larger nanotubes, and adopts a coaxial arrangement in it. Also, while water molecules can diffuse along the center of the nanotube, the molecules next to the inner imogolite walls have very low mobility. At the outer nanotube wall, an increase of water density is observed, this effect extends up to 1 nm, beyond which water properties are bulk-like. Both phenomena are affected by the imogolite curvature.

58 GEOSCIENCES↗

High-surface Thermally Stable Mesoporous Gallium Phosphates Constituted by Nanoparticles as Primary Building Blocks

In constant, search for micro/mesoporous materials, gallium phosphates, have attracted continued interest due to the large pore size reported for some of these solids in comparison with analogous aluminum phosphates. However up to now, the porosity of gallium phosphates collapsed upon template removal or exposure to the ambient moisture. In the present work, we describe high-surface thermally stable mesoporous gallium phosphates synthesized from gallium propoxide and PCl{sub 3} and different templating agents such as amines (dipropylamine, piperidine and aminopiperidine) and quaternary ammonium salts (C{sub 16}H{sub 33}(CH{sub 3})3NBr and C{sub 16}PyCl). These highly reactive precursors have so far not been used as gallium and phosphate sources for the synthesis of gallophosphates. Conceptually, our present synthetic procedure is based on the fast formation of gallium phosphate nanoparticles via the reaction of gallium propoxide with PCl{sub 3} and subsequent construction of the porous material with nanoparticles as building blocks. The organization of the gallophosphate nanoparticles in stable porous structures is effected by the templates. Different experimental procedures varying the molar composition of the sol-gel, pH and the pretreatment of gallium precursor were assayed, most of them leading to satisfactory materials in terms of thermal stability and porosity. In this way, a series of gallium phosphates with surface are above 200 m{sup 2} g{sup -1}, and narrow pore size from 3 to 6 nm and remarkable thermal stability (up to 550 C) have been prepared. In some cases, the structure tends to show some periodicity and regularity as determined by XRD. The remarkable stability has allowed us to test the catalytic activity of gallophosphates for the aerobic oxidation of alkylaromatics with notable good results. Our report reopens the interest for gallophosphates in heterogeneous catalysis.

36 MATERIALS SCIENCE↗

Proof of Equivalent Catalytic Functionality upon Photon-Induced and Thermal Activation of Supported Isolated Vanadia Species in Methanol Oxidation

Here, evidence is provided that isolated surface vanadia (VO4) species on SiO 2 can similarly act as a thermal heterogeneous catalyst and as a heterogeneous photocatalyst. Structurally identical surface VO 4 species catalyze the selective oxidation of methanol both by thermal activation and by UV-light induction. Selectivity to formaldehyde appears to be unity. For the photocatalytic reaction at room temperature, formaldehyde desorption is rate limiting. With larger agglomerates or V 2 O 5 nanoparticles, on the contrary, only the thermal reaction is feasible. This is tentatively attributed to the different positions of electronic states (HOMO/LUMO, valence/conduction band) on the electrochemical energy scale owing to the quantum size effect. Besides offering new fundamental insight into the mode of action of nanosized photocatalysts, our results demonstrate that tuning the photocatalytic reactivity of supported transition-metal oxides by adjusting the degree of agglomeration is feasible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photon induced Schottky barrier effects in inverse-extraordinary optoconductance structures

We expand upon our previous work and characterize the photo-dependence of the effective Schottky barrier in EOC and I-EOC heterostructures by measuring the open circuit voltage and the change in the reverse bias resistance. Under full illumination by a 5 mW, 632.8 nm HeNe laser, the barrier is effectively eliminated and the Ti-GaAs interface becomes Ohmic. The reverse bias resistance changes by a factor of 209 over an illumination intensity change of 10–5:1. While this work illustrates the behavior of the Schottky interface upon illumination, it also demonstrates the effectiveness of the four-point, van der Pauw measurement fundamental to EOC/I-EOC phenomena at monitoring changes in the active region of the mesa. The resistance is largely unaffected by the photovoltaic, DC offset of the surrounding leads, as indicated by the radial symmetry of 2-D resistance maps obtained by rastering the laser across EOC/IEOC devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Importance of Window Installation in Residential Building Envelopes Having Continuous External Insulation in Order to Realize Energy Efficiency

Residential buildings are one of the prime candidates in the United States for reducing energy consumption. Continuous exterior insulation (CEI) is being used increasingly often in residential buildings to improve energy efficiency. Windows constitute 15–40% of a building envelope and are the weakest component in energy performance. The installation of windows in walls with CEI has not been well evaluated. We identified four cases of installing windows in walls with CEI of 25–76 mm (1–3 in.) thickness and analyzed the energy loss between the window and wall interface (flanking loss), structural issues, air leakage, and moisture penetration. Thermal analysis showed that the insulation value (RSI) of the 305 mm (12 in.) perimeter wall surrounding a window decreased by 7.6–34.5% in the four cases when compared with the RSI of the wall without the window. A window installation method is proposed to address the issues likely to occur with installation methods currently being used in the field. An out-of-the-box installation system was also designed to achieve a better thermal performance, cost effectiveness, and structural performance in high-performance residential buildings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

In-situ SiN{sub x}/InN structures for InN field-effect transistors

Critical aspects of InN channel field-effect transistors (FETs) have been investigated. SiN{sub x} dielectric layers were deposited in-situ, in the molecular beam epitaxy system, on the surface of 2 nm InN layers grown on GaN (0001) buffer layers. Metal-insulator-semiconductor Ni/SiN{sub x}/InN capacitors were analyzed by capacitance-voltage (C-V) and current-voltage measurements and were used as gates in InN FET transistors (MISFETs). Comparison of the experimental C-V results with self-consistent Schrödinger-Poisson calculations indicates the presence of a positive charge at the SiN{sub x}/InN interface of Q{sub if} ≈ 4.4 – 4.8 × 10{sup 13 }cm{sup −2}, assuming complete InN strain relaxation. Operation of InN MISFETs was demonstrated, but their performance was limited by a catastrophic breakdown at drain-source voltages above 2.5–3.0 V, the low electron mobility, and high series resistances of the structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

SU-E-T-346: Effect of Jaw Position On Dose to Critical Structures in 3-D Conformal Radiotherapy Treatment of Pancreatic Cancer

Purpose: Three-dimensional conformal therapy remains a valid and widely used modality for pancreatic radiotherapy treatment. It usually meets dose constraints on critical structures. However, careful positioning of collimation jaws can reduce dose to the critical structures. Here we investigate the dosimetric effect of jaw position in MLC-based 3-D conformal treatment planning on critical structures. Methods: We retrospectively selected seven pancreatic cancer patients treated with 3-D conformal radiotherapy. We started with treatment plans (Varian Truebeam LINAC, Eclipse TPS, AAA, 18MV) having both x and y jaws aligned with the farthest extent of the block outline (8mm around PTV). Then we subsequently moved either both x-jaws or all x and y jaws outwards upto 3 cm in 1 cm increments and investigated their effect on average and maximum dose to neighboring critical structures keeping the same coverage to treatment volume. Results: Lateral displacement of both x-jaws by 1cm each increased kidney and spleen mean dose by as much as 1.7% and 1.3% respectively and superior inferior displacement increased liver, right kidney, stomach and spleen dose by as much as 2.1%, 2%, 5.2% and 1.6% respectively. Displacement of all x and y-jaws away by 1cm increased the mean dose to liver, right kidney, left kidney, bowels, cord, stomach and spleen by as much as 4.9%, 5.9%, 2.1%, 2.8%, 7.4%, 10.4% and 4.2% respectively. Percentage increase in mean dose due to 2 and 3cm jaw displacement increased almost linearly with the displaced distance. Changes in maximum dose were much smaller (mostly negligible) than the changes in mean dose. Conclusion: Collimation jaw position affects dose mostly to critical structures adjacent to it. Though treatment plans with MLCs conforming the block margin usually meet dose constraints to critical structures, keeping jaws all the way in, to the edge of the block reduces dose to the critical structures during radiation treatment.

60 APPLIED LIFE SCIENCES↗

Structural Instability in Electrically Stressed, Oxygen Deficient BaTiO 3 Nanocrystals

The dynamics of oxygen vacancies under external stimuli dominates the performance of many solid-state devices, including capacitors, oxide memristors, anionic conductors, etc. By means of in-situ Transmission Electron Microscopy, we found in BaTiO 3 perovskite nanocrystals that formation of oxygen vacancies due to electrical stressing renders the oxide amorphizable under electron beam illumination, suggesting the presence of a threshold concentration of oxygen vacancy affecting the structural stability of BaTiO 3 crystals upon high energy radiation. In contrast to the structural change, the resistivity of the nanocrystal seems not liable to the amorphization prior to dielectric breakdown at higher voltage bias. Here, we propose that an increase in oxygen vacancy content promotes oxygen mobility in the perovskite structure allowing electron beam induced electric field to modify the local structural and composition. Our in-situ observations reveal the central role of oxygen vacancies in the structural stability of perovskites which is of paramount importance to their applications in extreme environments and suggest a potential new route to micro-processing perovskite oxides using the electron beam via oxygen vacancy management without severely compromising the electric property.

36 MATERIALS SCIENCE↗