SEARCH · Search NASA

Results for “Vortex flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

All sources NASA NTRS DOE OSTI

NASA NTRS1980

Noise due to tip vortex formation on lifting rotors

The high frequency broadband noise radiated by the local separated flow at rotor blade tips is analyzed. The aeroacoustic model is based on the convection of the tip region's separated flow pressure fluctuations past the trailing edge of the blade. The tip vortex formation and separation are modeled from available experimental studies. The separated flow pressure fluctuations are estimated using available separated flow experimental data and correlations. The trailing edge noise was approximated using a point dipole model. The point dipole strengths were evaluated by a method based on the trailing edge noise theory of Amiet. The point dipole approach compares favorably to stationary airfoil trailing edge noise analyses and experiments except near the plane of the airfoil. The rotor tip separation noise results are compared to other noise mechanism calculations and to experiments. The tip noise mechanism is shown to be quite important in the high frequency range. It is likely to be the major contributor to high frequency broadband noise for heavily loaded rotors with low turbulence inflow.

George, A. R.↗

NASA NTRS2001

CFD Modeling for Active Flow Control

This presentation describes current work under UEET Active Flow Control CFD Research Tool Development. The goal of this work is to develop computational tools for inlet active flow control design. This year s objectives were to perform CFD simulations of fully gridded vane vortex generators, micro-vortex genera- tors, and synthetic jets, and to compare flowfield results with wind tunnel tests of simple geometries with flow control devices. Comparisons are shown for a single micro-vortex generator on a flat plate, and for flow over an expansion ramp with sidewall effects. Vortex core location, pressure gradient and oil flow patterns are compared between experiment and computation. This work lays the groundwork for evaluating simplified modeling of arrays of devices, and provides the opportunity to test simple flow control device/sensor/ control loop interaction.

Buning, Pieter G.↗

NASA NTRS1982

Investigation of the tip-clearance flow inside and at the exit of a compressor rotor passage. I - Mean velocity field

A stationary two-sensor hot-wire probe has been used in combination with an ensemble averaging technique to measure the flow in the tip clearance region of a compressor rotor with emphasis on the leakage flow development inside the tip-clearance region and at the exit of the rotor. It is found that the presence and interaction of leakage flow, annulus boundary layer, and the scraping vortex is the dominant feature at mid-chord position. The rotation of the blade augments the leakage flow, resulting in the movement of the leakage jet toward the mid-passage. The blade-to-blade distribution of properties is shown to be highly nonuniform, except in the downstream and upstream regions.

Pandya, A.↗

NASA NTRS2008

Pre-Stall Behavior of a Transonic Axial Compressor Stage via Time-Accurate Numerical Simulation

CFD calculations using high-performance parallel computing were conducted to simulate the pre-stall flow of a transonic compressor stage, NASA compressor Stage 35. The simulations were run with a full-annulus grid that models the 3D, viscous, unsteady blade row interaction without the need for an artificial inlet distortion to induce stall. The simulation demonstrates the development of the rotating stall from the growth of instabilities. Pressure-rise performance and pressure traces are compared with published experimental data before the study of flow evolution prior to the rotating stall. Spatial FFT analysis of the flow indicates a rotating long-length disturbance of one rotor circumference, which is followed by a spike-type breakdown. The analysis also links the long-length wave disturbance with the initiation of the spike inception. The spike instabilities occur when the trajectory of the tip clearance flow becomes perpendicular to the axial direction. When approaching stall, the passage shock changes from a single oblique shock to a dual-shock, which distorts the perpendicular trajectory of the tip clearance vortex but shows no evidence of flow separation that may contribute to stall.

Chen, Jen-Ping↗

NASA NTRS1993

Navier-Stokes prediction of a delta wing in roll with vortex breakdown

The three-dimensional, Reynolds-averaged, Navier-Stokes (RANS) equations are used to numerically simulate vortical flow about a 65 degree sweep delta wing. Subsonic turbulent flow computations are presented for this delta wing at 30 degrees angle of attack and static roll angles up to 42 degrees. This work is part of an on going effort to validate the RANS approach for predicting high-incidence vortical flows, with the eventual application to wing rock. The flow is unsteady and includes spiral-type vortex breakdown. The breakdown positions, mean surface pressures, rolling moments, normal forces, and streamwise center-of-pressure locations compare reasonably well with experiment. In some cases, the primary vortex suction peaks are significantly underpredicted due to grid coarseness. Nevertheless, the computations are able to predict the same nonlinear variation of rolling moment with roll angle that appeared in the experiment. This nonlinearity includes regions of local static roll instability, which is attributed to vortex breakdown.

Chaderjian, Neal M.↗

NASA NTRS2017

Axial Flow Conditioning Device for Mitigating Instabilities

A flow conditioning device for incrementally stepping down pressure within a piping system is presented. The invention includes an outer annular housing, a center element, and at least one intermediate annular element. The outer annular housing includes an inlet end attachable to an inlet pipe and an outlet end attachable to an outlet pipe. The outer annular housing and the intermediate annular element(s) are concentrically disposed about the center element. The intermediate annular element(s) separates an axial flow within the outer annular housing into at least two axial flow paths. Each axial flow path includes at least two annular extensions that alternately and locally direct the axial flow radially outward and inward or radially inward and outward thereby inducing a pressure loss or a pressure gradient within the axial flow. The pressure within the axial flow paths is lower than the pressure at the inlet end and greater than the vapor pressure for the axial flow. The invention minimizes fluidic instabilities, pressure pulses, vortex formation and shedding, and/or cavitation during pressure step down to yield a stabilized flow within a piping system.

Ahuja, Vineet↗

NASA NTRS1988

Flow visualization and numerical analysis of a coflowing jet - A three-dimensional approach

The instabilities of an acoustically excited coflowing jet are investigated by using a time series of cross-sections of large-scale structures present in the flow and by a fully three-dimensional numerical simulation via the vortex-element method. These structures are first revealed by a flow-visualization technique based on smoke seeding the inner jet flow and observing the flow cross-sections as the structures are convected past a stationary sheet of laser light. Usage of image-processing techniques along with computer graphics allows the full three-dimensional reconstruction of the structure. The general morphology of the flow is determined from the reconstructed views and shows that the vorticity is mainly concentrated into a single large-scale vortex ring. Hypotheses regarding the nature and origin of the longitudinal instabilities observed in the flow can be drawn from the reconstructed views, and are supported by the numerical simulations. Quantitative values such as the surface-to-volume ratio and the entrainment level are also obtained from the experimental data. The onset of streamwise vorticity and its distribution are derived from the numerical calculations as well. Three-dimensional views and a holographic display of a characteristic eddy are also presented.

Agui, Juan C.↗

NASA NTRS1971

Investigation of rotor blade tip-vortex aerodynamics

Several aspects of the aerodynamics of rotor blade tip vortices are examined. Two particular categories are dealt with; (1) dynamic loads on a blade passing close to or intersecting a trailing vortex, and (2) the response of the trailing vortex core to changes in the flow. Results for both categories are in reasonable agreement with existing data, although lower pressure gradients were obtained than anticipated for category one. A correlation between trailing edge sweep angle at the tip and vortex core size was noted for category two.

Lewellen, W. S.↗

NASA NTRS1988

A multiple-vortex-ring model of the DFW microburst

A multiple-vortex-ring model of the winds associated with a microburst is verified by matching the model-generated winds to those encountered at the Dallas-Ft. Worth (DFW) microburst. The basis of the model consists of time-invariant vortex ring filaments embedded in irrotational flow. Each ring's viscous core is modeled by distributing the vorticity over a small distance (relative to the ring diameter) radially from the filaments. Parameters such as the size and strength of the vortex rings are identified using a modified Newton-Raphson technique. The parameters identified from the analysis of the DFW microburst encounter indicate a large ring with a radius of 8500 ft and a smaller ring with a radius of 1700 ft.

Schultz, Thomas A.↗

NASA NTRS1992

Aeroloads and secondary flows in a transonic mixed flow turbine stage

A numerical simulation of a transonic mixed flow turbine stage has been carried out using an average passage Navier-Stokes analysis. The mixed flow turbine stage considered here consists of a transonic nozzle vane and a highly loaded rotor. The simulation was run at the design pressure ratio and is assessed by comparing results with those of an established throughflow design system. The three-dimensional aerodynamic loads are studied as well as the development and migration of secondary flows and their contribution to the total pressure loss. The numerical results indicate that strong passage vortices develop in the nozzle vane, mix out quickly, and have little impact on the rotor flow. The rotor is highly loaded near the leading edge. Within the rotor passage, strong spanwise flows and other secondary flows exist along with the tip leakage vortex. The rotor exit loss distribution is similar in character to that found in radial inflow turbines. The secondary flows and non-uniform work extraction also tend to significantly redistribute a non-uniform inlet total temperature profile by the exit of the stage.

Kirtley, K. R.↗

NASA NTRS1995

PARC3D calculations of the F/A-18A HARV inlet vortex generators

NASA Lewis Research Center is currently engaged in a research effort as a team member of the High Alpha Technology Program within the NASA agency. This program uses a specially-equipped F/A-18A aircraft called the High Alpha Research Vehicle (HARV), in an effort to improve the maneuverability of high performance military aircraft at low-subsonic-speed, high-angle-of-attack conditions. The overall objective of the NASA Lewis effort is to develop inlet analysis technology towards efficient airflow delivery to the engine during these maneuvers. One portion of this inlet analysis technology uses computational fluid dynamics to predict installed inlet performance. Most of the F/A-18A HARV geometry, which includes the ramp/splitter plate, side diverter and slot, inlet lip and upper diverter, and deflected leading-edge flap has been modeled. The empennage and rear fuselage have not. A pair of vortex generators located on the bottom wall of the inlet were not modeled initially. These vortex generators were installed to alleviate any flow separation that may be induced by the wheel well protrusion into the inlet wall. Calculations completed with the PARC3D code showed that the pressure recovery has been underpredicted and the flow distortion over-predicted. To improve the correlation of PARC3D predictions with flight and wind tunnel tests, the vortex generators were included in the grid geometry and the results are presented in this report. The grid totals 27 blocks or 1.3 million grid points for the half model, which includes the vortex generator grid blocks. Two flight cases were calculated, a high speed case with a Mach number of 0.8 and angle of attack of 3.4; and a low speed case with a Mach number of 0.43 and angle of attack of 32.2. The vortex generators have a significant effect on the inlet boundary layers at high speed, low angle of attack; and have no effect at low speed, high angle of attack.

Podleski, Steve D.↗

NASA NTRS1977

Numerical solutions of Navier-Stokes equations for the structure of a trailing vortex

The structure and decay of a trailing vortex were analyzed during the numerical solutions of the full Navier-Stokes equations. Unsteady forms of the governing equations were recast in terms of circulation, vorticity, and stream function as dependent variables, and a second upwind finite difference scheme was used to integrate them with prescribed initial and boundary conditions. The boundary conditions at the outer edge and at the outflow section of the trailing vortex were considered. Different models of the flow were postulated, and solutions were obtained describing the development of the flow as integration proceeds in time. A parametric study was undertaken with a view to understanding the various phenomena that may possibly occur in the trailing vortex. Using the Hoffman and Joubert law of circulation at the inflow section, the results of this investigation were compared with experimental data for a Convair 990 wind model and a rectangular wing. With an exponentially decaying law of circulation at the inflow section and an adverse pressure gradient at the outer edge of the trailing vortex, solutions depict vortex bursting through the sudden expansion of the core and/or through the stagnation and consequent reversal of the flow on the axis. It was found that this bursting takes place at lower values of the swirl ratio as the Reynolds number increases.

Jain, A. C.↗

NASA NTRS1984

An experimental study of a vortex/mixing-layer interaction

The first phase of a subsonic experimental investigation of the structure of a longitudinal vortex and the effect of the vortex on a two-stream turbulent mixing layer has been completed. A stable and well-defined longitudinal vortex was generated by mounting a half-delta-wing vortex generator in the wind-tunnel settling chamber. A detailed flow-visualization study, using the smoke-laser technique, was conducted, and X-wire probes were used to measure the mean-flow and turbulence quantities. At the upstream locations, the vortex was found to develop some normal stresses within the core region. The vortex also induced strong secondary motions and small increases in the normal stresses within the mixing layer. The normal stresses then combined with the appropriate mean-velocity gradients to generate shear stresses farther downstream. The results indicate that more sophisticated turbulence models will have to be developed if such complex interactions are to be computed accurately.

Mehta, R. D.↗

NASA NTRS1991

A comparison of airborne wake vortex detection measurements with values predicted from potential theory

An analysis of flight measurements made near a wake vortex was conducted to explore the feasibility of providing a pilot with useful wake avoidance information. The measurements were made with relatively low cost flow and motion sensors on a light airplane flying near the wake vortex of a turboprop airplane weighing approximately 90000 lbs. Algorithms were developed which removed the response of the airplane to control inputs from the total airplane response and produced parameters which were due solely to the flow field of the vortex. These parameters were compared with values predicted by potential theory. The results indicated that the presence of the vortex could be detected by a combination of parameters derived from the simple sensors. However, the location and strength of the vortex cannot be determined without additional and more accurate sensors.

Stewart, Eric C.↗

NASA NTRS2000

CVS Decomposition of 3D Homogeneous Turbulence Using Orthogonal Wavelets

This paper compares the filtering used in Coherent Vortex Simulation (CVS) decomposition with an orthogonal wavelet basis, with the Proper Orthogonal Decomposition (POD) or Fourier filtering. Both methods are applied to a field of Direct Numerical Simulation (DNS) data of 3D forced homogeneous isotropic turbulence at microscale Reynolds number R(sub lambda) = 168. We show that, with only 3%N retained modes, CVS filtering separates the coherent vortex tubes from the incoherent background flow. The latter is structureless, has an equipartition energy spectrum, and has a Gaussian velocity probability distribution function (PDF) and an exponential vorticity PDF. On the other hand, the Fourier basis does not extract the coherent vortex tubes cleanly and leaves organized structures in the residual high wavenumber modes whose PDFs are stretched exponentials for both the velocity and the vorticity.

Farge, Marie↗

NASA NTRS2016

Transition Delay in Hypersonic Boundary Layers via Optimal Perturbations

The effect of nonlinear optimal streaks on disturbance growth in a Mach 6 axisymmetric flow over a 7deg half-angle cone is investigated in an e ort to expand the range of available techniques for transition control. Plane-marching parabolized stability equations are used to characterize the boundary layer instability in the presence of azimuthally periodic streaks. The streaks are observed to stabilize nominally planar Mack mode instabilities, although oblique Mack mode disturbances are destabilized. Experimentally measured transition onset in the absence of any streaks correlates with an amplification factor of N = 6 for the planar Mack modes. For high enough streak amplitudes, the transition threshold of N = 6 is not reached by the Mack mode instabilities within the length of the cone, but subharmonic first mode instabilities, which are destabilized by the presence of the streaks, reach N = 6 near the end of the cone. These results suggest a passive flow control strategy of using micro vortex generators to induce streaks that would delay transition in hypersonic boundary layers.

Boundary layer transition↗

NASA NTRS1985

Wide-field shadowgraph flow visualization of tip vortices generated by a helicopter rotor

The vortex trajectory and vortex wake generated by helicopter rotors were visualized using a wide-field shadowgraph technique. Use of a retro-reflective Scotchlite screen made it possible to investigate the flow field generated by full-scale tail rotors. Tip vortex trajectories were visible in shadowgraphs for a range for tip Mach number of 0.38 - 0.60. The effect of the angle of attack was substantial. At an angle of attack greater than 8 degrees, the visibility of the vortex core was significant even at relatively low tip Mach numbers. The theoretical analysis of the visibility was carried out for a rotating blade. This analysis demonstrated that the visibility decreases with increasing dimensionless core radius (ro/c) and increases with increasing tip Mach number. Based on this investigation, it is concluded that the wide-field shadowgraph flow visualization technique should be feasible to study the flow field generated by a large main rotor in a wind tunnel and in an outdoor full-scale test stand. Of note is that the shadowgraph technique could easily be used with other on-going tests such as aerodynamic performance study, noise measurements, velocity measurements with LDV or hot-wire anemometer, local pressure measurement on the rotor surface, etc.

Parthasarathy, S. P.↗

DOE OSTI2021

Applying Time-Parallelization to Turbulent Flows

Parallelization of the temporal domain is explored for the solution of turbulent flows. Multigrid reduction-in-time (MGRIT) is used to advance the large-scale fluid dynamics in time sequentially on the coarsest space-time grid but propagate the information in time parallel on all other levels. The goal of this process is to accurately and efficiently resolve the coarse-scale turbulence structure and use that to drive the fine-scales of the turbulent flow. The extra forcing from nonlinear multigrid facilitates the coupling and interaction between fine and coarse scales, through which the multiscale nonlinear physics is properly captured. Adaptive mesh refinement is employed to finely resolve only the regions with strong gradients, which provides further computational efficiency. The underlying computational fluid dynamics solver is a fourth-order finite-volume scheme with the standard 4-stage Runge-Kutta method. An advanced approach is devised and implemented to enable MGRIT to solve highly turbulent flows successfully. Furthermore, the method is applied to solve a Taylor-Green vortex problem and a doubleshear-layer turbulent mixing flow. Results are promising, validating that MGRIT with the filtering approach has the potential to efficiently solve general turbulent flows.

Computational Fluid Dynamics↗