Search NASA⌕ Search

SEARCH · Search NASA

Results for “aqueous processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Purification of Gas and Liquid Streams Using Composite Sorbents Embedded in a Polyacrylonitrile Matrix

As new sorbents are developed for purifying gases or liquids via physisorption and/or chemisorption processes, the objective is typically to increase the specific surface area (SSA) to maximize the available binding sites for capturing various species of interest. One downfall to making a sorbent more porous is that it often leads to a product that is fragile or friable and can be damaged (resulting in unwanted powders), thus imposing process limitations. Techniques can be used to enhance the mechanical integrity of a sorbent, including heat treatments or pelletization with extrusion or granulation processes, but these can result in collapsed, unavailable pore structures within the sorbent, which decreases the diffusivity and eventually reduces the capacities of target species. An alternative approach for improving the mechanical integrity of the sorbent is to bind it (or encapsulate it) within a porous matrix that passively holds the sorbent in place. Typically, this approach leads to a decrease in sorption efficiency on the basis of starting sorbent mass, because the active sorbent is diluted by the binding matrix material and the active surfaces of the sorbent are somewhat obscured by the binding matrix; however, it comes with the advantage that the active sorbent is held in place and better protected from disintegrating during operation. One approach to securing the active sorbent is to embed it in a macroporous, passive polyacrylonitrile (PAN) matrix to create a composite sorbent. When optimized, the PAN matrix is highly porous and allows for gaseous or aqueous media transport through the product, providing adequate binding site access between the active sorbent and the species of interest. Including a polymer in the composite sorbent limits the maximum operating temperature, above which the composite sorbent incurs loss of structural integrity (e.g., decomposes) and/or reduction in SSA. Composite sorbents have been demonstrated with sulfide aerogels (SnS-PAN) for capturing I2(g), hydrogen mordenite (HZ-PAN) and silver-exchanged mordenite (AgZ-PAN) for capturing Kr and Xe, nanoparticle metal oxides (Nano-Composite Arsenic Sorbent, or N-CAS) for removing arsenic from water, ammonium molybdophosphate (AMP-PAN) for removing cesium-137 (137Cs) from aqueous nuclear waste streams, and The Phosphate Sponge (TPS) composite, which is being used to remove inorganic/ortho-phosphates in water treatment processes to mitigate introduction to the environment, which impedes toxic algae bloom formations. This chapter provides details on production of these materials along with options to optimize the synthesis process. It also includes experimental techniques to characterize products and assess their performance.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Enhanced Photocatalytic Property of Cu Doped Sodium Niobate

Here, we investigate the photocatalytic activity of Cu doped NaNbO 3 powder sample prepared by the modified polymer complex method. The photocatalytic activity of hydrogen evolution from methanol aqueous solution was improved by Cu 2.6 at% doping. The photocatalytic degradation of rhodamine B (RhB) under visible light irradiation was enhanced in comparison with pristine NaNbO 3 . Cu introduction improved the adsorption property of NaNbO 3 , judging from the Fourier transform infrared spectra. Moreover, the ultraviolet light excitation in Cu doped sample would accelerate the mineralized process.

36 MATERIALS SCIENCE↗

Valorization of Waste Lipids through Hydrothermal Catalytic Conversion to Liquid Hydrocarbon Fuels with in Situ Hydrogen Production

We demonstrate hydrothermal (300 degrees C, 10 MPa) catalytic conversion of real waste lipids (e.g., waste vegetable oil, sewer trap grease) to liquid hydrocarbon fuels without net need for external chemical inputs (e.g., H2 gas, methanol). A supported bimetallic catalyst (Pt-Re/C; 5 wt % of each metal) previously shown to catalyze both aqueous phase reforming of glycerol (a triacylglyceride lipid hydrolysis coproduct) to H2 gas and conversion of oleic and stearic acid, model unsaturated and saturated fatty acids, to linear alkanes was applied to process real waste lipid feedstocks in water. For reactions conducted with an initially inert headspace gas (N2), waste vegetable oil (WVO) was fully converted into linear hydrocarbons (C15-C17) and other hydrolyzed byproducts within 4.5 h, and H2 gas production was observed. Addition of H2 to the initial reactor headspace accelerated conversion, but net H2 production was still observed, in agreement with results obtained for aqueous mixtures containing model fatty acids and glycerol. Conversion to liquid hydrocarbons with net H2 production was also observed for a range of other waste lipid feedstocks (animal fat residuals, sewer trap grease, dry distiller's grain oil, coffee oil residual). These findings demonstrate potential for valorization of waste lipids through conversion to hydrocarbons that are more compatible with current petroleum-based liquid fuels than the biodiesel and biogas products of conventional waste lipid processing technologies.

09 BIOMASS FUELS↗

Innovative techniques for the production of energetic radicals for lunar materials processing including photogeneration via concentrated solar energy

The Department of Materials Science and Engineering (MSE) is investigating the use of monatomic chlorine produced in a cold plasma to recover oxygen and metallurgically significant metals from lunar materials. Development of techniques for the production of the chlorine radical (and other energetic radicals for these processes) using local planetary resources is a key step for a successful approach. It was demonstrated terrestrially that the use of UV light to energize the photogeneration of OH radicals from ozone or hydrogen peroxide in aqueous solutions can lead to rapid reaction rates for the breakdown of toxic organic compounds in water. A key question is how to use the expanded solar resource at the lunar surface to generate process-useful radicals. This project is aimed at investigating that question.

Osborn, D. E.↗

Structural and photocatalytic examination of CoMoO4 nanopowders synthesized by GNP method

Highlights: • Synthesis of CoMoO{sub 4} nanoparticles in a simple, quick, and inexpensive way, by using a glycine nitrate procedure (GNP). • Two different crystal structures of CoMoO{sub 4}, α and β, was confirmed by X-ray diffraction. • BET analysis confirmed significant specific surface areas of CoMoO{sub 4} nanopowder. • CoMoO{sub 4} nanopowders can be promising solutions in photocatalytic processes toward green chemistry and sustainable development. - Abstract: The synthesis route by solution combustion, a glycine nitrate procedure (GNP) of CoMoO{sub 4} nanopowders by a glycine as a fuel and as a complexant was examined concerning the photocatalytic aspects and powder characteristics. The synthesized samples were investigated by differential thermal analysis (DTA), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Field emission scanning electron microscopy (FESEM), Ultraviolet-Visible (UV/Vis) spectroscopy and nitrogen adsorption method. In this work, we presented a simple and effective method for controlling the composition and morphology of CoMoO{sub 4}. A single-phase α and β crystalline form of CoMoO{sub 4} compound was confirmed by X-ray diffraction (XRD). The photocatalytic activity of CoMoO{sub 4} nanopowders was estimated by the photocatalytic degradation of crystal violet in aqueous solution. In addition, the obtained specific CoMoO{sub 4} nanopowder demonstrated acceptable specific surface area, which can be of particular importance for the photocatalytic processes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Removal of Ni(II), Zn(II) and Pb(II) ions from single metal aqueous solution using rice husk-based activated carbon

An attempt was made to investigate the potential of rice husk-based activated carbon as an alternative low-cost adsorbent for the removal of Ni(II), Zn(II) and Pb(II) ions from single aqueous solution. Rice husk-based activated carbon was prepared via treatment of rice husk with NaOH followed by the carbonization process at 400°C for 2 hours. Three samples, i.e. raw rice husk, rice husk treated with NaOH and rice husk-based activated carbon, were analyzed for their morphological characteristics using field-emission scanning electron microscope/energy dispersive X-ray (FESEM/EDX). These samples were also analyzed for their carbon, hydrogen, nitrogen, oxygen and silica contents using CHN elemental analyzer and FESEM/EDX. The porous properties of rice husk-based activated carbon were determined by Brunauer-Emmett-Teller (BET) surface area analyzer, and its surface area and pore volume were 255 m{sup 2}/g and 0.17 cm{sup 2}/g, respectively. The adsorption studies for the removal of Ni(II), Zn(II) and Pb(II) ions from single metal aqueous solution were carried out at a fixed initial concentration of metal ion (150 ppm) with variation amount of adsorbent (rice husk-based activated carbon) as a function of varied contact time at room temperature. The concentration of each metal ion was analyzed using atomic absorption spectrophotometer (AAS). The results obtained from adsorption studies indicate the potential of rice husk as an economically promising precursor for the preparation of activated carbon for removal of Ni(II), Zn(II) and Pb(II) ions from single aqueous solution. Isotherm and kinetic model analyses suggested that the experimental data of adsorption studies fitted well with Langmuir, Freundlich and second-order kinetic models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Water uptake of clay and desert dust aerosol particles at sub- and supersaturated water vapor conditions

Airborne mineral dust particles serve as cloud condensation nuclei (CCN), thereby influencing the formation and properties of warm clouds. It is therefore of particular interest how dust aerosols with different mineralogy behave when exposed to high relative humidity (RH) or supersaturation with respect to liquid water similar to atmospheric conditions. In this study the sub-saturated hygroscopic growth and the supersaturated cloud condensation nucleus activity of pure clays and real desert dust aerosols was determined using a hygroscopicity tandem differential mobility analyzer (HTDMA) and a cloud condensation nuclei counter (CCNC), respectively. Five different illite, montmorillonite and kaolinite clay samples as well as three desert dust samples (Saharan dust (SD), Chinese dust (CD) and Arizona test dust (ATD)) were used. Aerosols were generated both with a wet and a dry disperser and the water uptake was parameterized via the hygroscopicity parameter, κ. The hygroscopicity of dry generated dust aerosols was found to be negligible when compared to processed atmospheric aerosols, with CCNC derived κ values between 0.00 and 0.02. The latter value can be idealized as a particle consisting of 96.7% (by volume) insoluble material and ~3.3% ammonium sulfate. Pure clay aerosols were found to be generally less hygroscopic than real desert dust particles. All illite and montmorillonite samples had κ~0.003, kaolinites were least hygroscopic and had κ=0.001. SD (κ=0.023) was found to be the most hygroscopic dry-generated desert dust followed by CD (κ=0.007) and ATD (κ=0.003). Wet-generated dust showed an increased water uptake when compared to dry-generated samples. This is considered to be an artifact introduced by redistribution of soluble material between the particles while immersed in an aqueous medium during atomization, thus indicating that specification of the generation method is critically important when presenting such data. Any atmospheric processing of fresh mineral dust which leads to the addition of more than ~3% soluble material is expected to significantly enhance hygroscopicity and CCN activity.

54 ENVIRONMENTAL SCIENCES↗

Coupling of nitric acid digestion and anion-exchange resin separation for the determination of methylmercury isotopic composition within organisms

Isotope ratios of methylmercury (MeHg) within organisms can be used to identify sources of MeHg that have accumulated in food webs, but these isotopic compositions are masked in organisms at lower trophic levels by the presence of inorganic mercury (iHg). To facilitate measurement of MeHg isotope ratios in organisms, we developed a method of extracting and isolating MeHg from fsh and aquatic invertebrates for compound-specifc isotopic analysis involving nitric acid digestion, batch anion-exchange resin separation, and pre-concentration by purge and trap. Recovery of MeHg was quantifed after each step in the procedure, and the average cumulative recovery of MeHg was 93.4±2.9% (1 SD, n=28) for biological reference materials and natural biota samples and 96.9±1.8% (1 SD, n=5) for aqueous MeHgCl standards. The amount of iHg impurities was also quantifed after each step, and the average MeHg purity was 97.8±4.3% (1 SD, n=28) across all reference materials and natural biota samples after the fnal separation step. Measured MeHg isotopic compositions of reference materials agreed with literature values obtained using other MeHg separation techniques, and MeHg isotope ratios of aqueous standards, reference materials, and natural biota samples were reproducible. On average, the reproducibility associated with reference material process replicates (2 SD) was 0.10‰ for δ 202 MeHg and 0.04‰ for Δ 199 MeHg. This new method provides a streamlined, reliable technique that utilizes a single sample aliquot for MeHg concentration and isotopic analysis. Furthermore, this promotes a tight coupling between MeHg concentration, %MeHg, and Hg isotopic composition, which may be especially benefcial for studying complex food webs with multiple isotopically distinct sources of iHg and/or MeHg.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Eco-friendly Porous Poly(imide-ether)s for the Efficient Removal of Methylene Blue: Adsorption Kinetics, Isotherm, Thermodynamics and Reuse Performances

Poly(imide-ether)s (PIEs), which is porous in nature, was synthesized using aromatic diamines and dianhydrides via the solution polycondenzation reaction. In the process, PIEs was used as an adsorbent for the removal of basic dye [Methylene blue (MB)] from the aqueous solution. The structure and the thermal stability of PIEs were characterized by FT-IR, {sup 1}H-NMR, XRD and TG analysis, and the adsorption behaviour of the PIEs was confirmed using UV/Visible, FT-IR and SEM with EDX analysis. Batch adsorption experiments were carried out and their parameters (pH 6.95), initial MB concentration (200 mg/L), adsorbent dosage (50 mg), contact time (120 min) and temperature (28 °C) were optimized. The batch adsorption experimental data of the effect of contact time, initial MB concentration and temperature were evaluated using the adsorption kinetics (Pseudo-first order, Pseudo-second order, Elovich and Intra-particle diffusion kinetic), isotherm (Langmuir, Freundlich, Redlich–Peterson and Sips isotherms) and thermodynamic models respectively. In the study, adsorption of MB onto PIEs followed Pseudo-second kinetics and found to be the best fitting model based on the obtained experimental data. The homogeneity and heterogeneity surface nature of PIEs were elucidated with two and three isotherm parameters respectively. The adsorption thermodynamic study indicates that the adsorption of MB onto PIEs was endothermic and spontaneous in nature. The adsorbed PIEs solid waste was utilized to prepare the polymer composite, and its property was characterized. Graphical Abstract: .

54 ENVIRONMENTAL SCIENCES↗

Avoiding surface instability and slurry jamming in simultaneous multilayer coating of structured particulate films

Simultaneous multilayer coating techniques are widely known, but their industrial application remains limited to narrow market sectors. One barrier to adoption may be the mismatch between industries that are familiar with such processes but have no need, and industries that have need but are not familiar. Moreover, there are application-specific technical challenges to developing multilayer-coating processes. In this article, we describe our resolution of two specific issues in simultaneous multilayer coating of all aqueous highly loaded slurries for new and emerging energy applications. The first issue is particle jamming (associated with Shear-thickening) of the highly loaded slurries in the die internals, which we alleviated by adding small amounts of viscosity modifiers without reducing the solid loading. The second issue is a Marangoni-driven surface instability that resembles top layer de-wetting, which we solved by carefully selecting surfactants to tune the dynamic surface tensions of each slurry. Both issues were resolved early in a step-wise development, saving significant development cost which in our case was driven by expensive materials.

08 HYDROGEN↗

Selective phosphate removal with manganese oxide composite anion exchange membranes in membrane capacitive deionization

The discharge of excessive phosphorous into water bodies can lead to serious eutrophication threatening aquatic ecosystem. Membrane capacitive deionization (MCDI) is an effective platform for deionizing aqueous streams; however, conventional MCDI is unable to selectively remove targeted ions from a liquid mixture. Here, in this work, we fabricated manganese oxide composite anion exchange membranes (AEMs) for MCDI to enhance phosphate removal selectivity from sodium chloride-sodium dihydrogen phosphate (10:1 M ratio) aqueous mixtures. We systematically investigated several critical factors, such as constant current or voltage operation, applied voltage amount, process stream pH, and manganese oxide (Mn 2 O 3 ) content in the AEM, on phosphate removal efficiency and phosphate selectivity. A trade-off was observed between phosphate removal and selectivity when increasing the cell voltage. Under the best conditions, a MCDI unit with a 20 wt% Mn 2 O 3 composite AEM and a bipolar membrane facilitated high phosphate removal efficiency of ≥ 31.8 % and a phosphate over chloride selectivity of 1.1 while showing stability for at least 30 cycles. To help understand how Mn 2 O 3 composite AEM boosts phosphate selectivity, static electronic structure calculations were performed, and they revelated that hydrogen phosphate absorption on Mn 2 O 3 composite AEM was 314 kcal/mol more exothermic than that on pristine AEM while chloride adsorption on Mn 2 O 3 composite AEM was 2.2 kcal/mol less exothermic than that on a pristine AEM. Overall, this work presents an effective strategy for selectively removing phosphate from model wastewater solutions and the mechanistic understanding that governs ion selectivity in composite ion-exchange membranes used in MCDI.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elucidating the temperature and density dependence of silver chloride hydration numbers in high-temperature water vapor: A first-principles molecular simulation study

Hydration numbers of metal complexes in low-density aqueous solutions are required for developing geochemical models for ore-forming metals and for designing supercritical desalination processes. In this study, we investigate the temperature and density dependence of the hydration numbers of silver chloride at 623 K, 673 K, and 713 K and densities of 10–100 kg/m 3 . Experimental estimates of the hydration number in the literature for AgCl at these conditions are inconclusive and possibly contradictory as to the temperature and density dependence. First-principles molecular simulation presents an attractive alternative to experimental measurements. Specifically, recent work shows that machine-learning-accelerated nested Monte Carlo simulations provide reliable estimates for the hydration numbers of CuCl at 623 K from 10 to 100 kg/m 3 . Using the same technique, we find a monotonic temperature dependence, with the hydration number decreasing slightly with increasing temperature. In addition, the simulation-predicted hydration numbers steadily increase with increasing density. These temperature and density trends are in agreement with certain experimental data sets. Therefore, this work demonstrates how first-principles Monte Carlo simulations assist in resolving discrepancies between experimental data sets. Our simulation results also correctly predict that the hydration number, and thus also the solubility, of AgCl is lower than that of CuCl under the same conditions. Furthermore, the bond length and angle formed between the water complex and AgCl differ from those for CuCl, consistent with the lower solubility of AgCl.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

GaMin’11 – an international inter-laboratory comparison for geochemical CO₂ - saline fluid - mineral interaction experiments

Due to the strong interest in geochemical CO₂-fluid-rock interaction in the context of geological storage of CO₂ a growing number of research groups have used a variety of different experimental ways to identify important geochemical dissolution or precipitation reactions and – if possible – quantify the rates and extent of mineral or rock alteration. In this inter-laboratory comparison the gas-fluid-mineral reactions of three samples of rock-forming minerals have been investigated by 11 experimental labs. The reported results point to robust identification of the major processes in the experiments by most groups. The dissolution rates derived from the changes in composition of the aqueous phase are consistent overall, but the variation could be reduced by using similar corrections for changing parameters in the reaction cells over time. The comparison of experimental setups and procedures as well as of data corrections identified potential improvements for future gas-fluid-rock studies.

58 GEOSCIENCES↗

TiO{sub 2}-based photocatalytic disinfection of microbes in aqueous media: A review

The TiO{sub 2} based photocatalyst has great potential for the disinfection/inactivation of harmful pathogens (such as E.coli in aqueous media) along with its well-known usefulness on various chemical pollutants. The disinfection property of TiO{sub 2} is primarily attributed to surface generation of reactive oxygen species (ROS) as well as free metal ions formation. Furthermore, its disinfection capacity and overall performance can be significantly improved through modifications of the TiO{sub 2} material. In this review, we provide a brief survey on the effect of various TiO{sub 2} materials in the disinfection of a wide range of environmentally harmful microbial pathogens (e.g., bacteria, fungi, algae, and viruses) in aqueous media. The influencing factors (such as reactor design, water chemistry, and TiO{sub 2} modifications) of such processes are discussed along with the mechanisms of such disinfection. It is believed that the combined application of disinfection and decontamination will greatly enhance the utilization of TiO{sub 2} photocatalyst as a potential alternative to conventional methods of water purification. - Highlights: • The advent of industrialization jeopardized the quality of drinking water. • TiO{sub 2} photocatalysis holds promise both in the degradation of pollutants and for disinfection. • The applicability of TiO{sub 2}-based decontamination is explored for microbial disinfection. • Here we provide a comprehensive review on titania-based photocatalysts for disinfection.

54 ENVIRONMENTAL SCIENCES↗

Highly swellable hydrogels prepared from extensively oxidized lignin

Biopolymers such as lignin are gaining renewed appeal due to the need for sustainable materials. Herein, we used chelator-mediated Fenton (CMF) chemistry to oxidize Kraft lignin to develop sustainable super absorbent materials. The CMF chemistry adds oxygen, opens aromatic rings and increases COOH content, producing hydrophilic lignin without depolymerization. UV absorption, molecular weight, elemental analysis, and titration were used to study the chemical compositions of CMF-processed lignin. Then the chemically modified hydrophilic lignin was used to produce lignin-based hydrogels utilizing an aqueous polymerization and cross-linking reaction that enabled tunable properties. The resulting lignin hydrogels absorbed water up to 96% and swelled up to 2400%, as well as being re-swellable in water. These lignin-based hydrogels may be applicable in water-absorbing products in consumer goods and agriculture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid phase characterization and transformation of illite mineral with gas-phase ammonia treatment

In situ remediation applications of ammonia (NH 3 ) gas have potential for sequestration of subsurface contamination. Ammonia gas injections initially increase the pore water pH leading to mineral dissolution followed by formation of secondary precipitates as the pH is neutralized. However, there is a lack of understanding of fundamental alteration processes due to NH 3 treatment. In these batch studies, phyllosilicate minerals (illite and montmorillonite) were exposed to NH 3 gas with subsequent aeration to simulate in situ remediation. Following treatments, solids were characterized using a variety of techniques, including X-ray diffraction, N 2 adsorption-desorption analysis for surface area, Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR), and microscopy methods to investigate physicochemical transformations. The results of this study indicate that, at high pH, the clays are altered as observed by differences in morphology and particle size via microscopy. However, the two clays interact differently with NH 3 . While montmorillonite interlayers collapsed due to intercalation, illite layers were unaffected as confirmed by FTIR analysis. Further, structural changes in silicate ([SiO 4 ] n- ) and aluminol (Al-OH) groups were identified by NMR and FTIR. This research showed that mineral alteration processes occur during and after NH 3 gas treatment which may be used to remove radionuclides from the aqueous phase through sorption, co-precipitation, and coating with secondary phyllosilicate alteration products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗