Bias-dependent molecular-level structure of electrical double layer in ionic liquid on graphite
Explore the source record for details and available documents.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Patterned organic light-emitting-diode substrates were treated by oxygen (O{sub 2}) and tetrafluoromethane (CF{sub 4}) radio-frequency (rf, 13.56 MHz) plasmas of low-power (close to 1 W) that were capacitively-coupled. An unexpected wettability contrast (water contact angle difference up to 90 deg. ) between the indium-tin-oxide anode and the bank resist regions was achieved, providing excellent conditioning prior to the ink-jet printing. This selectivity was found to be adjustable by varying the relative exposure time to the O{sub 2} and CF{sub 4} sequential plasmas. Static contact angle measurements and extensive x-ray photoelectron spectroscopy analyses showed that the wetting properties depend on the carbon and fluorine chemical functional groups formed at the outermost surface layers, whereas atomic force microscopy images did not show a morphological change. Plasma optical emission spectroscopy and ion mass spectroscopy suggested that surface functionalization was initiated by energy transfer from ionic species (O{sup +}, O{sub 2}{sup +}, CF{sup +}, CF{sub 2}{sup +}, and CF{sub 3}{sup +}) and excited neutrals (O{sup *} and F{sup *}). The absolute ion fluxes measured on the substrates were up to 10{sup 14} cm{sup -2} s{sup -1} and the ion energies up to 20 eV, despite the low powers applied during the process.
Graphene layers have been grown by molecular beam epitaxy (MBE) on the (0001) C-face of SiC and have been characterized by atomic force microscopy, low energy electron diffraction (LEED), and UV photoelectron spectroscopy. Contrary to the graphitization process, the step-terrace structure of SiC is fully preserved during the MBE growth. LEED patterns show multiple orientation domains which are characteristic of graphene on SiC (0001), indicating non-Bernal rotated graphene planes. Well-defined Dirac cones, typical of single-layer graphene, have been observed in the valence band for few graphene layers by synchrotron spectroscopy, confirming the electronic decoupling of graphene layers.
Morphological studies were done on Si (001) surfaces after rastering them with a 1 keV O{sub 2}{sup +} ion beam at an angle. The resulting mounded morphology was studied using atomic force microscopy (AFM) measurements. The roughness at different length scales were further extracted and quantified from AFM measurements using scaling analysis. Results indicate two growth regimes of the evolving surface which were evident from the power spectral density (PSD) and interface width analysis of the eroded surfaces. Initially the growth is unstable followed by a stable regime of the nanostructures evolved after about 35 minutes of erosion. Temporal studies done on these surfaces show the onset of shadowing at higher sputtering times thus indicating the breakdown of the growth model at these times.
The effect of hydrogen embrittlement on the localized plastic deformation of aluminum alloy D1 was investigated. The studies were performed for the test samples of aluminum alloy subjected to electrolytic hydrogenation. It is found that the mechanical properties and localized plastic deformation parameters of aluminum alloy are affected adversely by hydrogen embrittlement. The hydrogenated counterpart of alloy has a lower degree of ductility relative to the original alloy; however, the plastic flow behavior of material remains virtually unaffected. Using scanning electron and atomic force microscopy methods, the changes in the fracture surface were investigated. The deformation diagrams were examined for the deformed samples of aluminum alloy. These are found to show all the plastic flow stages: the linear, parabolic and pre-failure stages would occur for the respective values of the exponent n from the Ludwik-Holomon equation. Using digital speckle image technique, the local strain patterns were being registered for the original alloy D1 and the counterpart subjected to electrolytic hydrogenation for 100 h.
GaN thin film etching is investigated and compared for mesa formation in inductively coupled plasma (ICP) of Cl{sub 2} with Ar and BCl{sub 3} gas additives using photoresist mask. Etch characteristics are studied as a function of ICP process parameters, viz., ICP power, radio frequency (RF) power, and chamber pressure at fixed total flow rate. The etch rate at each ICP/RF power is 0.1–0.2 μm/min higher for Cl{sub 2}/Ar mixture mainly due to higher Cl dissociation efficiency of Ar additive that readily provides Cl ion/radical for reaction in comparison to Cl{sub 2}/BCl{sub 3} mixture. Cl{sub 2}/Ar mixture also leads to better photoresist mask selectivity. The etch-induced roughness is investigated using atomic force microscopy. Cl{sub 2}/Ar etching has resulted in lower root-mean-square roughness of GaN etched surface in comparison to Cl{sub 2}/BCl{sub 3} etching due to increased Ar ion energy and flux with ICP/RF power that enhances the sputter removal of etch product. The GaN surface damage after etching is also evaluated using room temperature photoluminescence and found to be increasing with ICP/RF power for both the etch chemistries with higher degree of damage in Cl{sub 2}/BCl{sub 3} etching under same condition.
The ZnMnO thin films were deposited on glass substrates by radio frequency magnetron sputtering method. The properties of ZnMnO thin films were investigated by high-resolution x-ray diffractometer (HRXRD),atomic force microscopy (AFM), UV-Vis spectrometer and room temperature photoluminescence (PL), under the influence of substrate temperature. The substrate temperature was varied from 300, 400 and 500°C. With increasing the substrate temperature, the structure of the films changed from cubic to hexagonal. The cubic ZnMnO thin films grown along [210] direction, while the hexagonal ones grown along [002] direction. The changes in surface morphology provided a proof on the structural transition. Also, decrease and increase of optical band gap is associated with cubic or hexagonal structure of the films.
The method of atomic-force microscopy has been used to experimentally study the effect of growth conditions on the structure of the surface of epitaxial GaN layers grown by molecular-beam epitaxy. Quantitative values of the density, height, and width of growth centers in relation to the conditions of epitaxy are obtained; the average length of the diffusion path of particles limiting the GaN growth rate have been estimated; and the activation energies and the surface-diffusion coefficients for these particles have been calculated. The equilibrium composition of adsorbed layers at the GaN (0001) surface in a wide range of deposition temperatures and pressures of gallium and nitrogen has been calculated with account taken of the following components: gallium atoms, nitrogen atoms, and NH molecules. On the basis of the comparison of experimental data on the structure of the GaN surface with results of calculations concerning the composition of adsorbed layers on the growth surface, it was assumed that the growth of GaN layers is limited by supply of gallium.
Using non-contact atomic force microscopy with metallic tips enabled us to detect the electrostatic dipole moment of single carbon monoxide (CO) molecules adsorbed on three very different substrates. The observed distance dependent contrast can be explained by an interplay between the attractive van der Waals interaction and the repulsive electrostatic interaction, respectively, with the latter stemming from antiparallel aligned dipoles in tip and molecule. Our results suggest that metallic as well as CO-functionalized tips are able to probe electrostatic properties of polar molecules and that repulsive dipole-dipole interactions have to be considered when interpreting complex contrast patterns.
The growth of Fe-Ni based amorphous nanocolumns has been studied using atomic force microscopy. The root mean square roughness of the film surface increased with the deposition time but showed a little change at higher deposition time. It was found that the separation between the nanostructures increased sharply during the initial stages of growth and the change was less pronounced at higher deposition time. During the initial stages of the column growth, a roughening process due to self shadowing is dominant and, as the deposition time increases, a smoothening mechanism takes place due to the surface diffusion of adatoms.
Raman spectroscopy and atomic-force microscopy were applied to study the morphology of nanoislands grown on strained Si{sub 1-x}Ge{sub x} sublayers. It was shown that the growth of nanoislands on strained Si{sub 1-x}Ge{sub x} sublayer not only induces the effect of their spatial ordering but also enhances the role of interdiffusion processes. Unusual high island volume increase during the epitaxy is explained by anomalous strong material diffusion from the sublayer into the islands, induced by nonuniform field of elastic strains.
The existence of anti-phase domains in cubic GaN grown on 3C-SiC/Si (001) substrates by plasma-assisted molecular beam epitaxy is reported. The influence of the 3C-SiC/Si (001) substrate morphology is studied with emphasis on the anti-phase domains (APDs). The GaN nucleation is governed by the APDs of the substrate, resulting in equal plane orientation and the same anti-phase boundaries. The presence of the APDs is independent of the GaN layer thickness. Atomic force microscopy surface analysis indicates lateral growth anisotropy of GaN facets in dependence of the APD orientation. This anisotropy can be linked to Ga and N face types of the {l_brace}111{r_brace} planes, similar to observations of anisotropic growth in 3C-SiC. In contrast to 3C-SiC, however, a difference in GaN phase composition for the two types of APDs can be measured by electron backscatter diffraction, {mu}-Raman and cathodoluminescence spectroscopy.
Sb{sub 2}Te{sub 3} nanoplates synthesized by vapor phase deposition method have been systemically investigated employing atomic force microscopy, which exhibit regular spiral structures on the surface. The height of spiral steps is determined to be 1 nm corresponding to one quintuple layer, with an inter-step separation ranging from 500 nm to 1 {mu}m. Growth mechanism of spiral structures on the Sb{sub 2}Te{sub 3} nanoplate surface is elucidated, which can be applied to other layered materials with van der Waals epitaxy growth. The electrostatic properties of Sb{sub 2}Te{sub 3} nanoplates with spiral structures are also simultaneously characterized.
The surface roughness and defect density of GaN epitaxial layers grown on c-plane sapphire substrate are investigated and found to be dependent on nitridation temperature. GaN epitaxial layers grown after nitridation of sapphire at 200°C have a higher defect density and higher surface roughness compared to the GaN layers grown at 646°C nitridation as confirmed by atomic force microscopy (AFM). The persistent photoconductivity (PPC) was observed in both samples and it was found to be decreasing with decreasing temperature in the range 150-300°C due to long carrier lifetime and high electron mobility at low temperature. The photoresponse of the GaN films grown in this study exhibit improved PPC due to their better surface morphology at 646°C nitrided sample. The point defects or extended microstructure defects limits the photocarrier lifetime and electron mobility at 200°C nitrided sample.
The conditions of formation of deep periodic trenches by photoelectrochemical etching of n-Si (100) with linear seeds on the surface are analyzed. Criteria for the proper choice of the period of seed grooves and the etching current density in relation to the doping level of the substrate are formulated. Corrugation of walls is a characteristic feature of the obtained structures; this corrugation is caused by traces of merged macropores. Atomic-force microscopy is used to study roughness of the side-walls in relation to the etching conditions; the current density at which one can obtain the smoothest side-walls is determined. The roughness of the side walls in structures with periods of 7 and 9 {mu}m on Si with the resistivity of 15 {Omega} cm amounts to {approx}40 nm. It is shown that additional treatment of the structures in alkaline solutions can decrease the side-wall roughness by approximately a factor of 2.
We investigate the properties and characteristics of planar Ti/TiO{sub x}/Ti junctions, which consist of transverse TiO{sub x} lines drawn on Ti test patterns. Junctions are elaborated by means of local anodic oxidation using atomic force microscopy. An irreversible morphological transformation occurring in a reproducible manner is observed when these planar junctions are electrically stressed under ambient atmosphere. Structural and chemical analyses based on transmission electron microscopy techniques reveal the extension of the initial amorphous TiO{sub x} into a crystalline rutile phase. This irreversible transformation is proven to vanish completely if the electrical stress occurs under vacuum atmosphere. Finally, we carry out temperature dependent electrical measurements in order to elucidate their conduction mechanism: Schottky emission above an ultra-low potential barrier is assumed to dominate under vacuum atmosphere whereas ionic conduction seems to prevail in air.
Undoped and cobalt doped nickel oxide thin films (Co:NiO) at different doping concentrations were deposited on a glass substrate at constant substrate temperature by spray pyrolysis. The doping percentage increased from 0 to 10% and the effects of doping content on structural, morphological and optical properties were explored by X-ray diffraction, atomic force microscopy and UV–visible spectroscopy, respectively. X-ray diffraction configurations proved the NiO thin films were polycrystalline in nature having a cubic crystal structure. The regularly used parameters such as crystallite size, micro-strain, dislocation density and texture coefficient are presented from structural data. The average crystallite size is found between 10 and 14 nm with cobalt doping (Co) concentration. The band gap energies were increased with the effect of Co doping concentration in the range between 2.10 and 2.50 eV. The various optical constants as a function of photon energy are modified with Co doping concentration.
The N-type untwinning surface relief associated with the fcc {r_reversible} fct martensitic transformation (MT) was observed in the Mn{sub 81.5}Fe{sub 14.0}Cu{sub 4.5} antiferromagnetic high-temperature shape memory alloy (SMA) by in situ atomic force microscopy. The measured untwinning relief angles ({theta}{sub {alpha}} Double-Vertical-Line {theta}{sub {beta}}) at the ridge and at the valley were different, and both angles were less than the conventional values. The surface relief exhibited good reversibility during heating and cooling because of the crystallographic reversibility of thermal-elastic SMAs. Untwinning shear was proposed as the main mechanism of the N-type surface relief. The order of the reverse MT was discussed based on the experimental measurements.