Search NASA⌕ Search

SEARCH · Search NASA

Results for “conditional shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Dual-season thermal energy storage-integrated heat pump system for load shifting: experiments, modeling and nationwide analysis

Here, this paper proposes and validates a dual-season thermal energy storage-integrated heat pump (TES-HP) system that shifts building electric load in both cooling and heating modes using a single phase-change TES. The design uses the TES as a heat sink for the condenser in summer and a heat source for the evaporator in winter, thereby reducing on-peak electric demand while ensuring compatible with existing air-distribution systems. A 14-kW TES-HP prototype with six operating modes and novel refrigerant charge management strategies was experimentally tested under varied conditions. Subsequently, data-driven polynomial performance curves were developed and validated against experiments, then coupled with a phase change material (PCM) model and a calibrated building model within a rule-based controller. Single-day case studies demonstrated effective on-peak demand reduction while maintaining thermal comfort. During cooling, hourly power was lowered by up to 1.5 kW; in heating, average hourly power decreased from over 3.5 kW to 1.8 kW, compared to an HP-only system, achieving 64.5 % load shifting, and the need for resistance heating was eliminated. Seasonal simulations showed typical on-peak electricity savings of 25–35 % in cooling and 40–65 % in heating, with the largest benefits on the hottest and coldest days. Extended response-surface analysis and nationwide mapping quantified load shifting as functions of ambient and TES temperatures, revealing a seasonal trade-off in TES phase-change temperature. These results demonstrate the TES-HP system as a practical and scalable solution for grid-interactive buildings that reduces on-peak demand and electricity use while maintaining thermal comfort and enhancing grid flexibility and reliability.

Grid-interactive buildings↗

Exploring scalar field dynamics with Gaussian processes

The origin of the accelerated expansion of the Universe remains an unsolved mystery in Cosmology. In this work we consider a spatially flat Friedmann-Robertson-Walker (FRW) Universe with non-relativistic matter and a single scalar field contributing to the energy density of the Universe. Properties of this scalar field, like potential, kinetic energy, equation of state etc. are reconstructed from Supernovae and BAO data using Gaussian processes. We also reconstruct energy conditions and kinematic variables of expansion, such as the jerk and the slow roll parameter. We find that the reconstructed scalar field variables and the kinematic quantities are consistent with a flat ΛCDM Universe. Further, we find that the null energy condition is satisfied for the redshift range of the Supernovae data considered in the paper, but the strong energy condition is violated.

79 ASTRONOMY AND ASTROPHYSICS↗

Comparative Cooling Season Performance of Air Distribution Systems in Multistory Townhomes

IBACOS investigated the performance of a small-diameter high velocity heat pump system compared to a conventional system in a new construction triplex townhouse. A ductless heat pump system also was installed for comparison, but the homebuyer backed out because of aesthetic concerns about that system. In total, two buildings, having identical solar orientation and comprised of six townhomes, were monitored for comfort and energy performance. Results show that the small-diameter system provides more uniform temperatures from floor to floor in the three-story townhome. No clear energy consumption benefit was observed from either system. The builder is continuing to explore the small-diameter system as its new standard system to provide better comfort and indoor air quality. The homebuilder also explored the possibility of shifting its townhome product to meet the U.S. Department of Energy Challenge Home National Program Requirements.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

New type of hill-top inflation

We suggest a new type of hill-top inflation originating from the initial conditions in the form of the microcanonical density matrix for the cosmological model with a large number of quantum fields conformally coupled to gravity. Initial conditions for inflation are set up by cosmological instantons describing underbarrier oscillations in the vicinity of the inflaton potential maximum. These periodic oscillations of the inflaton field and cosmological scale factor are obtained within the approximation of two coupled oscillators subject to the slow roll regime in the Euclidean time. This regime is characterized by rapid oscillations of the scale factor on the background of a slowly varying inflaton, which guarantees smallness of slow roll parameters ϵ and η of the following inflation stage. A hill-like shape of the inflaton potential is shown to be generated by logarithmic loop corrections to the tree-level asymptotically shift-invariant potential in the non-minimal Higgs inflation model and R{sup 2}-gravity. The solution to the problem of hierarchy between the Planckian scale and the inflation scale is discussed within the concept of conformal higher spin fields, which also suggests the mechanism bringing the model below the gravitational cutoff and, thus, protecting it from large graviton loop corrections.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Drought shifts dissolved organic matter sources from above- to belowground and stress-induced processes in Amazon white-sand forests

White-sand forests contribute significantly to dissolved organic matter (DOM) production in the central Amazon, forming blackwater rivers that dominate organic matter export from the Amazon basin to the ocean. Despite their importance in controlling DOM export, white-sand forests are understudied, and it remains unclear whether systematic changes in the formation of blackwater DOM occur and how seasonal variations and extremes like El Niño-associated droughts impact them. We collected soil porewater from two central Amazon white-sand forests for two years, spanning a wet La Niña year followed by an El Niño drought year. The molecular composition of DOM was analyzed using high-resolution mass spectrometry, and correlation network analysis was employed to identify ecologically meaningful DOM subsets. Using additional chemical characterization, database annotations, correlation with 14C-age of DOM and climatic variables, and ecological null modeling, we propose five distinct DOM sources: plant litter and throughfall, soil organic matter (SOM) decomposition, root exudation, and two drought response subsets of likely microbial and plant origin. During drought conditions, aboveground plant-derived compounds decreased, while SOM products, root exudates, and drought response compounds increased. These drought responses were qualitatively similar in both years but notably amplified in the drier El Niño year. Drought amplified deterministic control over DOM composition, indicating that DOM reflected directed biological responses and that future droughts are likely to generate similar shifts. Overall, drought substantially altered belowground carbon cycling by shifting DOM sources and inducing stress responses, effects expected to recur and potentially intensify under future climate scenarios.

Lange, Dan F.↗

Surface plasmon and photonic mode propagation in gold nanotubes with varying wall thickness

Gold nanotube arrays are synthesized with a range of wall thicknesses (15 to >140 nm) and inner diameters of {approx}200 nm using a hard-template method. A red spectral shift (>0.39 eV) with decreasing wall thickness is observed in dark-field spectra of nanotube arrays and single nanowire/nanotube heterostructures. Finite-difference-time-domain simulations show that nanotubes in this size regime support propagating surface plasmon modes as well as surface plasmon ring resonances at visible wavelengths (the latter is observed only for excitation directions normal to the nanotube long axis with transverse polarization). The energy of the surface plasmon modes decreases with decreasing wall thickness and is attributed to an increase in mode coupling between propagating modes in the nanotube core and outer surface and the circumference dependence of ring resonances. Surface plasmon mode propagation lengths for thicker-walled tubes increase by a factor of {approx}2 at longer wavelengths (>700 nm), where ohmic losses in the metal are low, but thinner-walled tubes (30 nm) exhibit a more significant increase in surface plasmon propagation length (by a factor of more than four) at longer wavelengths. Additionally, nanotubes in this size regime support a photonic mode in their core, which does not change in energy with changing wall thickness. However, photonic mode propagation length is found to decrease for optically thin walls. Finally, correlations are made between the experimentally observed changes in dark-field spectra and the changes in surface plasmon mode properties observed in simulations for the various gold nanotube wall thicknesses and excitation conditions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Antecedent Hydrologic Conditions Reflected in Stream Lithium Isotope Ratios During Storms

Antecedent hydrological conditions are recorded through the evolution of dissolved lithium isotope signatures (δ 7 Li) by juxtaposing two storm events in an upland watershed subject to a Mediterranean climate. Discharge and δ 7 Li are negatively correlated in both events,but mean δ 7 Li ratios and associated ranges of variation are distinct between them. We apply a previously developed reactive transport model (RTM) for the site to these event-scale flow perturbations, but observed shifts in stream δ 7 Li are not reproduced. To reconcile the stability of the subsurface solute weathering profile with our observations of dynamic stream δ 7 Li signatures, we couple the RTM to a distribution of fluid transit times that evolve based on storm hydrographs. The approach guides appropriate flux-weighting of fluid from the RTM over a range of flow path lengths, or equivalently fluid residence times. This flux-weighted RTM approach accurately reproduces dynamic storm δ 7 Li-discharge patterns distinguished by the antecedent conditions of the watershed.

58 GEOSCIENCES↗

Coupling DAEM and CFD for simulating biomass fast pyrolysis in fluidized beds

We report results from computational simulations of an experimental, lab-scale bubbling bed biomass pyrolysis reactor that include a distributed activation energy model (DAEM) for the kinetics. In this study, we utilized multiphase computational fluid dynamics (CFD) to account for the turbulent hydrodynamics, and this was combined with the DAEM kinetics in a multi-component, multi-step reaction network. Our results indicate that it is possible to numerically integrate the coupled CFD–DAEM system without significantly increasing computational overhead. It is also clear, however, that reactor operating conditions, reaction kinetics, and multiphase flow dynamics all have major impacts on the pyrolysis products exiting the reactor. We find that, with the same pre-exponential factors and mean activation energies, inclusion of distributed activation energies in the kinetics can shift the predicted average value of the exit vapor-phase tar flux and its statistical distribution, compared to single-valued activation-energy kinetics. Perhaps the most interesting observed trend is that increasing the diversity of the DAEM activation energies appears to increase the mean tar yield, all else being equal. As a result, these findings imply that accurate resolution of the reaction activation energy distributions will be important for optimizing biomass pyrolysis processes.

09 BIOMASS FUELS↗

Anisotropic Etching of Hexagonal Boron Nitride and Graphene: Question of Edge Terminations

Here, chemical vapor deposition (CVD) has been established as the most effective way to grow large area two-dimensional materials. Direct study of the etching process can reveal subtleties of this competing with the growth reaction and thus provide the necessary details of the overall growth mechanism. Here we investigate hydrogen-induced etching of hBN and graphene and compare the results with the classical kinetic Wulff construction model. Formation of the anisotropically etched holes in the center of hBN and graphene single crystals was observed along with the changes in the crystals' circumference. We show that the edges of triangular holes in hBN crystals formed at regular etching conditions are parallel to B-terminated zigzags, opposite to the N-terminated zigzag edges of hBN triangular crystals. The morphology of the etched hBN holes is affected by a disbalance of the B/N ratio upon etching and can be shifted toward the anticipated from the Wulff model N-terminated zigzag by etching in a nitrogen buffer gas instead of a typical argon. For graphene, etched hexagonal holes are terminated by zigzag, while the crystal circumference is gradually changing from a pure zigzag to a slanted angle resulting in dodecagons.

2D materials↗

Defect modes of one-dimensional photonic-crystal structure with a resonance nanocomposite layer

We have studied the defect modes of a structure of Fabry – Perot interferometer type, in which the layer separating Bragg mirrors is made of a heterogeneous composite material with metallic nanoscale inclusions. Effective optical characteristics of the nanocomposite material have resonance singularities in the visible region of the spectrum, which are conditioned by the surface plasmon resonance of metallic nanoparticles. It is shown that the spectral profile of the energy bandgap of the photonic structure can be modified by varying the volume fraction and size of nanoparticles. The interrelation of splitting and shift of defect modes with structural parameters of a nanocomposite layer is studied by means of a numerical – graphical method with allowance for the frequency dependences of phases and amplitudes of reflectances in Bragg mirrors. (photonic crystal structures)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

THE EFFECT OF A DYNAMIC INNER HELIOSHEATH THICKNESS ON COSMIC-RAY MODULATION

The time-dependent modulation of galactic cosmic rays in the heliosphere is studied over different polarity cycles by computing 2.5 GV proton intensities using a two-dimensional, time-dependent modulation model. By incorporating recent theoretical advances in the relevant transport parameters in the model, we showed in previous work that this approach gave realistic computed intensities over a solar cycle. New in this work is that a time dependence of the solar wind termination shock (TS) position is implemented in our model to study the effect of a dynamic inner heliosheath thickness (the region between the TS and heliopause) on the solar modulation of galactic cosmic rays. The study reveals that changes in the inner heliosheath thickness, arising from a time-dependent shock position, does affect cosmic-ray intensities everywhere in the heliosphere over a solar cycle, with the smallest effect in the innermost heliosphere. A time-dependent TS position causes a phase difference between the solar activity periods and the corresponding intensity periods. The maximum intensities in response to a solar minimum activity period are found to be dependent on the time-dependent TS profile. It is found that changing the width of the inner heliosheath with time over a solar cycle can shift the time of when the maximum or minimum cosmic-ray intensities occur at various distances throughout the heliosphere, but more significantly in the outer heliosphere. The time-dependent extent of the inner heliosheath, as affected by solar activity conditions, is thus an additional time-dependent factor to be considered in the long-term modulation of cosmic rays.

79 ASTRONOMY AND ASTROPHYSICS↗

UNDERSTANDING THE MG II AND Hα SPECTRA IN A HIGHLY DYNAMICAL SOLAR PROMINENCE

Mg ii h and k and Hα spectra in a dynamical prominence have been obtained along the slit of the Interface Region Imaging Spectrograph (IRIS) and with the Meudon Multi-channel Subtractive Double Pass spectrograph on 2013 September 24, respectively. Single Mg ii line profiles are not much reversed, while at some positions along the IRIS slit the profiles show several discrete peaks that are Doppler-shifted. The intensity of these peaks is generally decreasing with their increasing Doppler shift. We interpret this unusual behavior as being due to the Doppler dimming effect. We discuss the possibility to interpret the unreversed single profiles by using a two-dimensional (2D) model of the entire prominence body with specific radiative boundary conditions. We have performed new 2D isothermal–isobaric modeling of both Hα and Mg ii lines and show the ability of such models to account for the line profile variations as observed. However, the Mg ii line-center intensities require the model with a temperature increase toward the prominence boundary. We show that even simple one-dimensional (1D) models with a prominence-to-corona transition region (PCTR) fit the observed Mg ii and Hα lines quite well, while the isothermal–isobaric models (1D or 2D) are inconsistent with simultaneous observations in the Mg ii h and k and Hα lines, meaning that the Hα line provides a strong additional constraint on the modeling. IRIS far-UV detection of the C ii lines in this prominence seems to provide a direct constraint on the PCTR part of the model.

79 ASTRONOMY AND ASTROPHYSICS↗

Comparison of Preanode and Postanode Carbon Dioxide Separation for IGFC Systems

This paper examines the arrangement of a solid oxide fuel cell (SOFC) within a coal gasification cycle, this combination generally being called an integrated gasification fuel cell cycle. This work relies on a previous study performed by the National Energy Technology Laboratory (NETL) that details thermodynamic simulations of integrated gasification combined cycle (IGCC) systems and considers various gasifier types and includes cases for 90% CO2 capture (2007, “Cost and Performance Baseline for Fossil Energy Plants, Vol. 1: Bituminous Coal and Natural Gas to Electricity,” National Energy Technology Laboratory Report No. DOE/NETL-2007/1281). All systems in this study assume a Conoco Philips gasifier and cold-gas clean up conditions for the coal gasification system (Cases 3 and 4 in the NETL IGCC report). Four system arrangements, cases, are examined. Cases 1 and 2 remove the CO2 after the SOFC anode. Case 3 assumes steam addition, a water-gas-shift (WGS) catalyst, and a Selexol process to remove the CO2 in the gas cleanup section, sending a hydrogen-rich gas to the fuel cell anode. Case 4 assumes Selexol in the cold-gas cleanup section as in Case 3; however, there is no steam addition, and the WGS takes places in the SOFC and after the anode. Results demonstrate significant efficiency advantages compared with IGCC with CO2 capture. The hydrogen-rich case (Case 3) has better net electric efficiency compared with typical postanode CO2 capture cases (Cases 1 and 2), with a simpler arrangement but at a lower SOFC power density, or a lower efficiency at the same power density. Case 4 gives an efficiency similar to Case 3 but also at a lower SOFC power density. Carbon deposition concerns are also discussed

01 COAL, LIGNITE, AND PEAT↗

Reliability of Aging Polymer Components

A viscoelastic constitutive analysis is used to investigate the counter-intuitive observation of “mobility decrease with increased deformation through yield” in a glass forming polymer under compressive and tensile loading conditions. Current Sandia National Laboratory polymer models are built on the assumption that deformation enhances the mobility of the material. If this assumption is not true at small strain rates (e.g., thermal fluctuations in stockpile storage) then models will not be able to accurately predict stress evolution and potential failure of components during stockpile storage. The behavior of an epoxy thermoset is explored using an extensively validated material “clock” model, the Simplified Potential Energy Clock (SPEC) model. This methodology allows for a comparison between the linear viscoelastic (LVE) limit and the true non-linear viscoelastic (NLVE) representation and enables exploration of a wide range of conditions that are not practical to explore experimentally. The model predicts the behavior described as “mobility decrease with increased deformation” in the LVE limit and at low strain rates for NLVE. Only when loading rates are sufficient to decrease the material shift factor by multiple orders of magnitude is the anticipated deformation induced mobility or “mobility increase with increased deformation” observed. While the model has not been “trained” for these behaviors, it also predicts that the normalized stress relaxation response is indistinguishable amongst strain levels in the “post-yield” region as has been experimentally reported. At long time, which has not been examined experimentally, the model predicts the normalized relaxation curves “crossover” and return to the LVE ordering. These findings further demonstrate the ability of rheologically simple models to represent experimentally measured material response and present predictions at long time scales that could be tested experimentally.

42 ENGINEERING↗

Micro-structural optimization of polybenzimidazole-based membranes for H2/CO2 separation at elevated temperatures

There is compelling need to develop novel separation methods to improve the energy efficiency of synthesis (syn) gas processing operations including H{sub 2} and H{sub 2}/CO production to meet power, chemicals, and fuel producer needs, as well as carbon capture and removal of other undesirable syngas impurities. To be technically and economically viable, a successful separation method must be applicable to industrially relevant gas streams at realistic process conditions and compatible with large gas volumes. H{sub 2} selective membrane technology is a promising method for syngas separations at elevated temperatures (>150 C) that could be positioned upstream or downstream of one or more of the water-gas-shift reactors (WGSRs) or integrated with a WGSR depending on application specific syngas processing. Polybenzimidazole (PBI)-based polymer chemistries are exceptional candidates for H{sub 2}/CO{sub 2} separations at elevated temperatures. In general, these materials possess excellent chemical resistance, very high glass transition temperatures (> 400 C), good mechanical properties, and an appropriate level of processability. Although commercially available PBI polymers have demonstrated commercially attractive H{sub 2}/CO{sub 2} selectivity, their H{sub 2} permeability is low. Our team s employing structural and chemical manipulations to tailor the polymer free-volume achitecture with the ultimate goal of enhancing H{sub 2} permselectivity while retaining the inherent hermochemical stability characteristics of PBI. We will discuss our synthetic approaches and their influences on the gas transport behavior of these PBI-based materials. In general, a decrease in H{sub 2}/CO{sub 2} selectivity was observed with an increase in H{sub 2} permeability. H{sub 2} permeability and H{sub 2}/CO{sub 2} selectivity at 250 C ranged from 50 to 1000 barrer and 5 to 45, respectively.

08 HYDROGEN↗

Non-stoichiometric mixed-phase titania photocatalyst

A mixed anatase-rutile phase, non-stoichiometric titania photocatalyst material is a highly reactive and is a UV and visible light responsive photocastalyst in the as-deposited condition (i.e. without the need for a subsequent thermal treatment). The mixed phase, non-stoichiometric titania thin film material is non-stoichiometric in terms of its oxygen content such that the thin film material shows a marked red-shift in photoresponse.

36 MATERIALS SCIENCE↗

From Energy Audits to Home Performance: 30 Years of Articles in Home Energy Magazine

Home Energy Magazine has been publishing articles about residential energy efficiency for 30 years. Its goal has been to disseminate technically reliable and neutral information to the practitioners, that is, professionals in the business of home energy efficiency. The articles, editorials, letters, and advertisements are a kind of window on the evolution of energy conservation technologies, policies, and organizations. Initially, the focus was on audits and simple retrofits, such as weatherstripping and insulation. Instrumentation was sparse sometimes limited to a ruler to measure depth of attic insulation and a blower door was exotic. CFLs were heavy, awkward bulbs which might, or might not, fit in a fixture. Saving air conditioning energy was not a priority. Solar energy was only for the most adventurous. Thirty years on, the technologies and business have moved beyond just insulating attics to the larger challenge of delivering home performance and achieving zero net energy. This shift reflects the success in reducing space heating energy and the need to create a profitable industry by providing more services. The leading edge of the residential energy services market is becoming much more sophisticated, offering both efficiency and solar systems. The challenge is to continue providing relevant and reliable information in a transformed industry and a revolutionized media landscape.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗