Search NASA⌕ Search

SEARCH · Search NASA

Results for “density maps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Corrosion of 907 Steel Influenced by Sulfate-Reducing Bacteria

The effect of sulfate-reducing bacteria (SRB) on the corrosion of 907 steel was investigated. Results demonstrated that the chemical composition of corrosion products, the corrosion rate, and corrosion type were altered due to the adherence of SRB and the subsequent formation of biofilm on the 907 steel surface. Different from the case in sterile medium that ferrous oxides predominated in the corrosion products, ferrous sulfide was an important component in SRB-containing medium. Meanwhile, corrosion of 907 steel was enhanced by SRB, and the corrosion rate was dependent on their metabolic activity, which increased, stabilized, and decreased in the exponential growth, death, and residual phases, respectively. Furthermore, the corrosion type was changed from uniform corrosion to localized corrosion with the introduction of SRB, and the development process was analyzed based on the current distribution map of wire beam electrodes. In sterile medium, the maximum current density decreased with the immersion time extended, and there were no significant anodic current peaks in the late period, while in SRB-containing medium, the ratio between cathodic areas and anodic areas was high in the exponential growth phase, and stable anodic sites formed gradually in death and residual phases, which facilitated the development of localized corrosion.

36 MATERIALS SCIENCE↗

EM structure of a helicase-loader complex depicting a 6:2 binding sub-stoichiometry from Geobacillus kaustophilus HTA426

During DNA replication, bacterial helicase is recruited as a complex in association with loader proteins to unwind the parental duplex. Previous structural studies have reported saturated 6:6 helicase-loader complexes with different conformations. However, structural information on the sub-stoichiometric conformations of these previously-documented helicase-loader complexes remains elusive. Here, with the aid of single particle electron-microscopy (EM) image reconstruction, we present the Geobacillus kaustophilus HTA426 helicase-loader (DnaC-DnaI) complex with a 6:2 binding stoichiometry in the presence of ATPγS. In the 19 Å resolution EM map, the undistorted and unopened helicase ring holds a robust loader density above the C-terminal RecA-like domain. Meanwhile, the path of the central DNA binding channel appears to be obstructed by the reconstructed loader density, implying its potential role as a checkpoint conformation to prevent the loading of immature complex onto DNA. Our data also reveals that the bound nucleotides and the consequently induced conformational changes in the helicase hexamer are essential for active association with loader proteins. These observations provide fundamental insights into the formation of the helicase-loader complex in bacteria that regulates the DNA replication process. - Highlights: • Helicase-loader complex structure with 6:2 sub-stoichiometry is resolved by EM. • Helicase hexamer in 6:2 sub-stoichiometry is constricted and un-opened. • 6:2 binding ratio of helicase-loader complex could act as a DNA loading checkpoint. • Nucleotides stabilize helicase-loader complex at low protein concentrations.

60 APPLIED LIFE SCIENCES↗

Mechanoadaptive strain and functional osseointegration of dental implants in rats

Spatiotemporal implant-bone biomechanics and mechanoadaptive strains in peri-implant tissue are poorly understood. Physical and chemical characteristics of an implant-bone complex (IBC) were correlated in three-dimensional space (along the length and around a dental implant) to gather insights into time related integration of the implant with the cortical portion of a jaw bone in a rat. Rats (N = 9) were divided into three experimental groups with three rats per time point; 3-, 11-, and 24-day. All rats were fed crumbled hard pellets mixed with water (soft-food diet) for the first 3 days followed by a hard-food diet with intact hard-food pellets (groups of 11- and 24-day only). Biomechanics of the IBCs harvested from rats at each time point was evaluated by performing mechanical testing in situ in tandem with X-ray imaging. The effect of physical association (contact area) of a loaded implant with adapting peri-implant tissue, and resulting strain within was mapped by using digital volume correlation (DVC) technique. The IBC stiffness at respective time points was correlated with mechanical strain in peri-implant tissue. Results illustrated that IBC stiffness at 11-day was lower than that observed at 3-day. However, at 24-day, IBC stiffness recovered to that which was observed at 3-day. Furthermore, correlative microscopy and spectroscopy illustrated that the lower IBC stiffness was constituted by softer and less mineralized peri-implant tissue that contained varying expressions of osteoconductive elements. Lower IBC stiffness observed at 11-day was constituted by less mineralized peri-implant tissue with osteoconductive elements that included phosphorus (P) which was co-localized with higher expression of zinc (Zn), and lower expression of calcium (Ca). Higher IBC stiffness at 24-day was constituted by mineralized peri-implant tissue with higher expressions of osteoconductive elements including Ca and P, and lower expressions of Zn. These spatiotemporal correlative maps of peri-implant tissue architecture, heterogeneous distribution of mineral density, and elemental colocalization underscore mechanoadaptive physicochemical properties of peri-implant tissue that facilitate functional osseointegration of an implant. These results provided insights into 1) plausible "prescription" of mechanical loads as an osteoinductive "therapeutic dose" to encourage osteoconductive elements in the peri-implant tissue that would facilitate functional osseointegration of the implant; 2) a "critical temporal window" between 3 and 11 days, and perhaps it is this acute phase during which key candidate regenerative molecules can be harnessed to accelerate osseointegration of an implant under load.

60 APPLIED LIFE SCIENCES↗

Characterization of Electronic Stress-Induced Changes in Multilayer MoS 2

Transition metal dichalcogenides like molybdenum disulfide (MoS 2 ) are compelling for next-generation electronic devices. In this work, we investigate the impact of electronic stress on MoS 2 to illustrate that observational and phenomenological information on multiple devices can be useful to describe changes in the device, and caution against the rationalization of paltry results as representative or correlative to device behavior. Here, we stress MoS 2 by applying a sustained 20 V DC bias to study the material’s response. Post-stress electronic characterization revealed nonuniform shifts in current–voltage (I–V) behavior alongside microscale changes. Complementary mechanical, spectroscopic, and scanning microwave impedance measurements showed that stress-induced features locally modulate stiffness, surface potential, Raman intensity, and charge carrier density. We correlated I–V behavior with morphological features (wrinkles, tears, folds, height) and device-level geometry (MoS 2 overlap with electrodes, channel area, contact length) on 50 test structures across five chips to move beyond anecdotal conclusions. We found no universal correlations before DC stress. However, device-level geometry was correlated with I–V behavior after DC stress, suggesting that electrode contacts play a more dominant role than morphology in determining performance. Delamination and thinning induced by DC stress led to localized reductions in charge carrier density within the affected regions. Further, delamination and thinning appear to map to I–V device performance in a few samples, but the correlation is lost when a larger sample size is considered. This suggests significant sample-to-sample variability in surface electronic states of the test structures. We also discuss how environmental factors introduced during fabrication may contribute to the observed heterogeneous device response. Progress will require high-resolution, multimodal analysis across many samples constructed under controlled, clean conditions. By building data sets that capture variability, we can better identify the true drivers of performance.

36 MATERIALS SCIENCE↗

Deep learning-enabled probing of irradiation-induced defects in time-series micrographs

Modeling time-series data with convolutional neural networks (CNNs) requires building a model to learn in batches as opposed to training sequentially. Coupling CNNs with in situ or operando techniques opens the possibility of accurately segmenting dynamic reactions and mass transport phenomena to understand how materials behave under the conditions in which they are used. In this article, in situ ion irradiation transmission electron microscopy (TEM) images are used as inputs into the CNN to assess the defect generation rate, defect cluster density, and saturation of defects. We then use the output segmentation maps to correlate with conventional TEM micrographs to assess the model’s ability to detail nanoscale interactions. Next, we discuss the implications of preprocessing and hyperparameters on model variability, accuracy when expanded to other datasets, and the role of regularization when controlling model variance. Ultimately, we eliminate human bias when extrapolating physical metrics, speed up analysis time, decouple reactions that happen at 100 ms intervals, and deploy models that are both accurate and transferable to similar experiments.

Burns, Kory (ORCID:0000000158019909)↗

INFRARED NARROWBAND TOMOGRAPHY OF THE LOCAL STARBURST NGC 1569 WITH THE LARGE BINOCULAR TELESCOPE/LUCIFER

We used the near-IR imager/spectrograph LUCIFER mounted on the Large Binocular Telescope to image, with subarcsecond seeing, the local dwarf starburst NGC 1569 in the JHK bands and He I 1.08 {mu}m, [Fe II] 1.64 {mu}m, and Br{gamma} narrowband filters. We obtained high-quality spatial maps of He I 1.08 {mu}m, [Fe II] 1.64 {mu}m, and Br{gamma} emission across the galaxy, and used them together with Hubble Space Telescope/Advanced Camera for Surveys images of NGC 1569 in the H{alpha} filter to derive the two-dimensional spatial map of the dust extinction and surface star formation rate (SFR) density. We show that dust extinction (as derived from the H{alpha}/Br{gamma} flux ratio) is rather patchy and, on average, higher in the northwest (NW) portion of the galaxy (E{sub g}(B - V) {approx_equal} 0.71 mag) than in the southeast (E{sub g}(B - V) {approx_equal} 0.57 mag). Similarly, the surface density of SFR (computed from either the dereddened H{alpha} or dereddened Br{gamma} image) peaks in the NW region of NGC 1569, reaching a value of about 4 x 10{sup -6} M{sub sun} yr{sup -1} pc{sup -2}. The total SFR as estimated from the integrated, dereddened H{alpha} (or, alternatively, Br{gamma}) luminosity is about 0.4 M{sub sun} yr{sup -1}, and the total supernova rate from the integrated, dereddened [Fe II] 1.64 {mu}m luminosity is about 0.005 yr{sup -1} (assuming a distance of 3.36 Mpc). The azimuthally averaged [Fe II] 1.64 {mu}m/Br{gamma} flux ratio is larger at the edges of the central, gas-deficient cavities (encompassing the superstar clusters A and B) and in the galaxy outskirts. If we interpret this line ratio as the ratio between the average past star formation (as traced by supernovae) and ongoing activity (represented by OB stars able to ionize the interstellar medium), it would then indicate that star formation has been quenched within the central cavities and lately triggered in a ring around them. The number of ionizing hydrogen and helium photons as computed from the integrated, dereddened H{alpha} and He I 1.08 {mu}m luminosities suggests that the latest burst of star formation occurred about 4 Myr ago and produced new stars with a total mass of {approx_equal}1.8 x 10{sup 6} M{sub sun}.

79 ASTRONOMY AND ASTROPHYSICS↗

STAR FORMATION MODELS FOR THE DWARF GALAXIES NGC 2915 AND NGC 1705

Crucial to a quantitative understanding of galaxy evolution are the properties of the interstellar medium that regulate galactic-scale star formation activity. We present here the results of a suite of star formation models applied to the nearby blue compact dwarf galaxies NGC 2915 and NGC 1705. Each of these galaxies has a stellar disk embedded in a much larger, essentially starless H I disk. These atypical stellar morphologies allow for rigorous tests of star formation models that examine the effects on star formation of the H I, stellar, and dark matter mass components, as well as the kinematics of the gaseous and stellar disks. We use far-ultraviolet and 24 {mu}m images from the Galaxy Evolution Explorer and the Spitzer Infrared Nearby Galaxies Survey, respectively, to map the spatial distribution of the total star formation rate surface density within each galaxy. New high-resolution H I line observations obtained with the Australia Telescope Compact Array are used to study the distribution and dynamics of each galaxy's neutral interstellar medium. The standard Toomre Q parameter is unable to distinguish between active and non-active star-forming regions, predicting the H I disks of the dwarfs to be sub-critical. Two-fluid instability models incorporating the stellar and dark matter components of each galaxy, in addition to the gaseous component, yield unstable portions of the inner disk. Finally, a formalization in which the H I kinematics are characterized by the rotational shear of the gas produces models that very accurately match the observations. This suggests the time available for perturbations to collapse in the presence of rotational shear to be an important factor governing galactic-scale star formation.

79 ASTRONOMY AND ASTROPHYSICS↗

THE 200{sup 0} LONG MAGELLANIC STREAM SYSTEM

We establish with certainty that the Magellanic Stream (MS) is some 40{sup 0} longer than previously known and that the entire MS and Leading Arm system is thus at least 200{sup 0} long. With the Green Bank Telescope (GBT), we conducted a {approx}200 deg{sup 2}, 21 cm survey at the tip of the MS to substantiate the continuity of the MS between the Hulsbosch and Wakker data and the MS-like emission reported by Braun and Thilker. Our survey, in combination with the Arecibo survey by Stanimirovic et al., shows that the MS gas is continuous in this region and that the MS is at least {approx}140{sup 0} long. The MS tip is composed of a multitude of forks and filaments. We identify a new filament on the eastern side of the MS that significantly deviates from the equator of the MS coordinate system for more than {approx}45{sup 0}. Additionally, we find a previously unknown velocity inflection in the MS tip near MS longitude L{sub MS} {approx}-120{sup 0} at which the velocity reaches a minimum and then starts to increase. We find that five compact high-velocity clouds cataloged by de Heij et al. as well as Wright's Cloud are plausibly associated with the MS because they match the MS in position and velocity. The mass of the newly confirmed {approx}40{sup 0} extension of the MS tip is {approx}2 x 10{sup 7} M{sub sun} (d/120 kpc){sup 2} (including Wright's Cloud increases this by {approx}50%) and increases the total mass of the MS by {approx}4%. However, projected model distances of the MS at the tip are generally quite large and, if true, indicate that the mass of the extension might be as large as {approx}10{sup 8} M{sub sun}. From our combined map of the entire MS, we find that the total column density (integrated transverse to the MS) drops markedly along the MS and follows an exponential decline with L{sub MS} of N{sub H{sub i}} = 5.9 x 10{sup 21}exp(L{sub MS}/19.{sup 0}3) cm{sup -2}. Under the assumption that the observed sinusoidal velocity pattern of the LMC filament of the MS is due to the origin of the MS from a rotating LMC, we estimate that the age of the {approx}140{sup 0} long MS is {approx}2.5 Gyr. This coincides with bursts of star formation in the Magellanic Clouds and a possible close encounter of these two galaxies with each other that could have triggered the formation of the MS. These newly observed characteristics of the MS offer additional constraints for MS simulations. In the Appendix, we describe a previously little discussed problem with a standing wave pattern in GBT H I data and detail a method for removing it.

79 ASTRONOMY AND ASTROPHYSICS↗

EARLIEST STAGES OF PROTOCLUSTER FORMATION: SUBSTRUCTURE AND KINEMATICS OF STARLESS CORES IN ORION

We study the structure and kinematics of nine 0.1 pc scale cores in Orion with the IRAM 30 m telescope and at higher resolution eight of the cores with CARMA, using CS(2-1) as the main tracer. The single-dish moment zero maps of the starless cores show single structures with central column densities ranging from 7 to 42 Multiplication-Sign 10{sup 23} cm{sup -2} and LTE masses from 20 M{sub Sun} to 154 M{sub Sun }. However, at the higher CARMA resolution (5''), all of the cores except one fragment into 3-5 components. The number of fragments is small compared to that found in some turbulent fragmentation models, although inclusion of magnetic fields may reduce the predicted fragment number and improve the model agreement. This result demonstrates that fragmentation from parsec-scale molecular clouds to sub-parsec cores continues to take place inside the starless cores. The starless cores and their fragments are embedded in larger filamentary structures, which likely played a role in the core formation and fragmentation. Most cores show clear velocity gradients, with magnitudes ranging from 1.7 to 14.3 km s{sup -1} pc{sup -1}. We modeled one of them in detail, and found that its spectra are best explained by a converging flow along a filament toward the core center; the gradients in other cores may be modeled similarly. We infer a mass inflow rate of {approx}2 Multiplication-Sign 10{sup -3} M{sub Sun} yr{sup -1}, which is in principle high enough to overcome radiation pressure and allow for massive star formation. However, the core contains multiple fragments, and it is unclear whether the rapid inflow would feed the growth of primarily a single massive star or a cluster of lower mass objects. We conclude that fast, supersonic converging flow along filaments play an important role in massive star and cluster formation.

79 ASTRONOMY AND ASTROPHYSICS↗

Searching for signatures of cosmic superstrings in the CMB

Because cosmic superstrings generically form junctions and gauge theoretic strings typically do not, junctions may provide a signature to distinguish between cosmic superstrings and gauge theoretic cosmic strings. In cosmic microwave background anisotropy maps, cosmic strings lead to distinctive line discontinuities. String junctions lead to junctions in these line discontinuities. In turn, edge detection algorithms such as the Canny algorithm can be used to search for signatures of strings in anisotropy maps. We apply the Canny algorithm to simulated maps which contain the effects of cosmic strings with and without string junctions. The Canny algorithm produces edge maps. To distinguish between edge maps from string simulations with and without junctions, we examine the density distribution of edges and pixels crossed by edges. We find that in string simulations without Gaussian noise (such as produced by the dominant inflationary fluctuations) our analysis of the output data from the Canny algorithm can clearly distinguish between simulations with and without string junctions. In the presence of Gaussian noise at the level expected from the current bounds on the contribution of cosmic strings to the total power spectrum of density fluctuations, the distinction between models with and without junctions is more difficult. However, by carefully analyzing the data the models can still be differentiated.

79 ASTRONOMY AND ASTROPHYSICS↗

Excitation and tunneling spectra of a fractional quantum Hall system in the thin-cylinder limit

Here, the excitations of fractional quantum Hall effect (FQHE) states have been largely inaccessible to experimental probes until recently. New electron scanning tunneling microscopy (STM) results from Hu et al. [Nat. Phys. 21, 716 (2025)] show promise in detecting and identifying these excited states via the local density of states (LDOS) spectrum. On a torus, there exists a mapping from the lowest Landau level states to a 1D lattice with a Hamiltonian that features dipole moment conservation. In this work, we apply perturbation theory starting from the thin-cylinder limit (𝐿 𝑥 → ∞, 𝐿 𝑦 < 𝑙 𝐵 for torus dimensions 𝐿 𝑥 and 𝐿 𝑦 and magnetic length 𝑙 𝐵 ) to obtain an analytical approach to the low-lying neutral and charged excitations of the 𝜈 = 1/3 FQHE state. Notably, in the thin cylinder, we can systematically enumerate all the low-lying excitations by the patterns of “dipoles” formed by the electron occupation pattern on the 1D lattice. We find that the thin-cylinder limit predicts a significant dispersion of the low-lying neutral excitations but sharpness of the LDOS spectra, which measure charged excitations. We also discuss connections between our work and several different approaches to the FQHE STM spectra, including those using the composite fermion theory. Numerical exact diagonalization beyond the thin-cylinder limit suggests that the energies of charged excitations remain largely confined to a narrow range of energies, which in experiments might appear as a single peak.

Adhidewata, Jyesta M. [University of California, B↗

Impact of CMS Multi-jets and Missing Energy Search on CMSSM Fits

Recent CMS data significantly extend the exclusion limits for supersymmetry. We examine the impact of such data on global fits of the constrained minimal supersymmetric standard model (CMSSM) to indirect and cosmological data. By simulating supersymmetric signal events at the LHC, we construct a likelihood map for the recent CMS data, validating it against the exclusion region calculated by the experiment itself. A previous CMSSM global fit is then reweighted by our likelihood map. The CMS results nibble away at the high fit probability density region, transforming probability distributions for the scalar and gluino masses. The CMS search has a nontrivial effect on tan{beta} due to correlations between the parameters implied by the fits to indirect data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Studying the validity of relativistic hydrodynamics with a new exact solution of the Boltzmann equation

We present an exact solution to the Boltzmann equation which describes a system undergoing boost-invariant longitudinal and azimuthally symmetric radial expansion for arbitrary shear viscosity to entropy density ratio. This new solution is constructed by considering the conformal map between Minkowski space and the direct product of three-dimensional de Sitter space with a line. The resulting solution respects $SO(3)_q\otimes SO(1,1)\otimes Z_2$ symmetry. We compare the exact kinetic solution with exact solutions of the corresponding macroscopic equations that were obtained from the kinetic theory in ideal and second-order viscous hydrodynamic approximations. The macroscopic solutions are obtained in de Sitter space and are subject to the same symmetries used to obtain the exact kinetic solution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Green Bank Ammonia Survey: First Results of NH{sub 3} Mapping of the Gould Belt

We present an overview of the first data release (DR1) and first-look science from the Green Bank Ammonia Survey (GAS). GAS is a Large Program at the Green Bank Telescope to map all Gould Belt star-forming regions with A{sub V}≳7 mag visible from the northern hemisphere in emission from NH{sub 3} and other key molecular tracers. This first release includes the data for four regions in the Gould Belt clouds: B18 in Taurus, NGC 1333 in Perseus, L1688 in Ophiuchus, and Orion A North in Orion. We compare the NH{sub 3} emission to dust continuum emission from Herschel and find that the two tracers correspond closely. We find that NH{sub 3} is present in over 60% of the lines of sight with A{sub V}≳7 mag in three of the four DR1 regions, in agreement with expectations from previous observations. The sole exception is B18, where NH{sub 3} is detected toward ∼40% of the lines of sight with A{sub V}≳7 mag. Moreover, we find that the NH{sub 3} emission is generally extended beyond the typical 0.1 pc length scales of dense cores. We produce maps of the gas kinematics, temperature, and NH{sub 3} column densities through forward modeling of the hyperfine structure of the NH{sub 3} (1, 1) and (2, 2) lines. We show that the NH{sub 3} velocity dispersion, σ{sub v}, and gas kinetic temperature, T {sub K}, vary systematically between the regions included in this release, with an increase in both the mean value and the spread of σ{sub v} and T {sub K} with increasing star formation activity. The data presented in this paper are publicly available (https://dataverse.harvard.edu/dataverse/GAS-DR1).

79 ASTRONOMY AND ASTROPHYSICS↗

Predawn enhancement of 6300-A emission observed near the plasmapause from the Isis-2 spacecraft.

Data from several Isis-2 spacecraft passes are described in which the 6300-A atomic oxygen red line photometer mapped intensity steps resembling the predawn enhancement. Comparison with the electron density measured at the spacecraft indicates a plasmapause influence on the 6300-A emission rate, in that the intensity varies roughly inversely with the electron density at 1400 km. A simple calculation demonstrates the idea that field line opacity differences for photoelectrons are significant across the plasmapause. The measured electron temperatures are inadequate to account for the 6300-A excitation, thus confirming that it must arise from another mechanism.

Shepherd, G. G.↗

Fission track astrology of three Apollo 14 gas-rich breccias

The three Apollo 14 breccias 14301, 14313, and 14318 all show fission xenon due to the decay of Pu-244. To investigate possible in situ production of the fission gas, an analysis was made of the U-distribution in these three breccias. The major amount of the U lies in glass clasts and in matrix material and no more than 25% occurs in distinct high-U minerals. The U-distribution of each breccia is discussed in detail. Whitlockite grains in breccias 14301 and 14318 found with the U-mapping were etched and analyzed for fission tracks. The excess track densities are much smaller than indicated by the Xe-excess. Because of a preirradiation history documented by very high track densities in feldspar grains, however, it is impossible to attribute the excess tracks to the decay of Pu-244. A modified track method has been developed for measuring average U-concentrations in samples containing a heterogeneous distribution of U in the form of small high-U minerals. The method is briefly discussed, and results for the rocks 14301, 14313, 14318, 68815, 15595, and the soil 64421 are given.

Graf, H.↗

Observation of features in the soft X-ray background flux

Two rocket observations of very soft X-ray diffuse intensity show three emission regions of large angular extent. A large portion of the sky as seen with wide angular resolution is mapped. These three regions coincide with broad regions of small column densities of neutral hydrogen. It is suggested that a component of the interstellar medium is very hot and is responsible for the soft X-ray emission and the O VI.

Williamson, F. O.↗

Spatially resolved spectrophotometry of Comet P/Stephan-Oterma

Observations of Comet P/Stephan-Oterma were made with an Intensified Dissector Scanner spectrograph on the McDonald Observatory 2.7-m telescope during the period from July 1980 to February 1981. These spectra cover a range of heliocentric distances from 2.3 AU preperihelion to 1.8 AU postperihelion. A small aperture was used to map the spatial distributions of the gases in the coma. Column densities of the observed cometary emissions (CN, C3, CH, and C2) were calculated, and it is shown that Stephan-Oterma appeared nearly spherically symmetric. These date are used by Cochran (1985) to constrain chemical models of Stephan-Oterma.

Cochran, A. L.↗