Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffraction in time”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

GEOCHEMICAL INVESTIGATIONS OF CO₂-BRINE-ROCK INTERACTIONS OF THE KNOX GROUP IN THE ILLINOIS BASIN

Increased output of greenhouse gases, particularly carbon dioxide (CO₂), into the atmosphere from anthropogenic sources is of great concern. A potential technology to reduce CO₂ emissions is geologic carbon sequestration. This technology is currently being evaluated in the United States and throughout the world. The geology of the Illinois Basin exhibits outstanding potential as a carbon sequestration target, as demonstrated by the ongoing Illinois Basin – Decatur Project that is using the Mt. Simon Sandstone reservoir and Eau Claire Shale seal system to store and contain 1 million tonnes of CO₂. The Knox Group-Maquoketa Shale reservoir and seal system, located stratigraphically above the Mt. Simon Sandstone-Eau Claire Shale reservoir and seal system, has little economic value as a resource for fossil fuels or as a potable water source, making it ideal as a potential carbon sequestration target. In order for a reservoir-seal system to be effective, it must be able to contain the injected CO₂ without the potential for the release of harmful contaminants liberated by the reaction between CO₂-formation fluids and reservoir and seal rocks. This study examines portions of the Knox Group (Potosi Dolomite, Gunter Sandstone, New Richmond Sandstone) and St. Peter Sandstone, and Maquoketa Shale from various locations around the Illinois Basin. A total of 14 rock and fluid samples were exposed to simulated sequestration conditions (9101–9860 kPa [1320–1430 psi] and 32°–42°C [90°– 108°F]) for varying amounts of time (6 hours to 4 months). Knox Group reservoir rocks exhibited dissolution of dolomite in the presence of CO₂ as indicated by petrographic examination, X-ray diffraction analysis, and fluid chemistry analysis. These reactions equilibrated rapidly, and geochemical modeling confirmed that these reactions reached equilibrium within the time frames of the experiments. Pre-reaction sample mineralogy and postreaction fluid geochemistry from this study suggests only limited potential for the release of United States Environmental Protection Agency regulated inorganic contaminants into potable water sources. Short-term core flood experiments further verify that the carbonate reactions occurring in Knox Group reservoir samples reach equilibrium rapidly. The core flood experiments also lend insight to pressure changes that may occur during CO₂ injection. The Maquoketa Shale experiments reveal that this rock is initially chemically reactive when in contact with CO₂ and brine. However, due to the conservative nature of silicate and clay reaction kinetics and the rapid equilibration of carbonate reactions that occur in the shale, these reactions would not present a significant risk to the competency of the shale as an effective seal rock.

Yoksoulian, Lois↗

The symmetries of image formation by scattering II Applications

We show that the symmetries of image formation by scattering enable graph-theoretic manifold-embedding techniques to extract structural and timing information from simulated and experimental snapshots at extremely low signal. The approach constitutes a physically-based, computationally efficient, and noise-robust route to analyzing the large and varied datasets generated by existing and emerging methods for studying structure and dynamics by scattering. We demonstrate three-dimensional structure recovery from X-ray diffraction and cryo-electron microscope image snapshots of unknown orientation, the latter at 12 times lower dose than currently in use. We also show that ultra-low-signal, random sightings of dynamically evolving systems can be sequenced into high quality movies to reveal their evolution. Our approach offers a route to recovering timing information in time-resolved experiments, and extracting 3D movies from two-dimensional random sightings of dynamic systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Effect of Dopant Concentration and Annealing Treatments on N-Type Iodine Doped CdTe

We report properties of highly conducting n-type cadmium telluride single crystals doped with iodine (CdTe:I). These crystals were grown with dopant concentrations in the range of 10^17 cm-3 to 10^19 cm-3 by Modified Vertical Bridgman (MVB) melt growth. Post-growth dopant activation, including Cd annealing, Te annealing, and rapid thermal annealing (RTA), was applied to improve free carrier density. The structural, optical, and electrical properties were analyzed by Glow Discharge Mass Spectroscopy (GDMS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Photoluminescence Spectroscopy (PL), optical absorption, Hall measurements, Capacitance-Voltage (CV) measurements, and time-resolved photoluminescence (TRPL). The results indicate that Cd annealing is the most effective activation method to get 100% donor activation (n is approximately 2 x 10^18 cm-3), which is close to the room temperature solubility limit of iodine. This leads to the lowest resistivity and the highest mobility. Moreover, this data suggests a potential role of Cd vacancy-related defects on electrical self-compensation.

annealing↗

Characterization of Simulated BWR and Steam Exposed FeCrAl Coated Zircaloy 2

To combat the rapid oxidation that occurs in nuclear reactors during transient scenarios, investigations into modifying or replacing the existing zirconium based cladding and structural material have become a focus. Aside from testing these alternatives in the transient scenarios, verification of performance under normal operation is necessary. This work will examine the effect of normal BWR water chemistry over two time periods on FeCrAl coated Zircaloy 2 (Zry2) and its response to high temperature steam. X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Energy-dispersive X-ray Spectroscopy (EDS), and Thermogravimetric (TG) analysis are utilized to analyze the chemical and physical changes caused by these exposures. These tests show that under short time periods, normal water chemistry BWR conditions do not adversely change the effectiveness of a FeCrAl coating. A spinel structure was formed using Ni from an external source, however it did not have a major impact on the coatings performance in high temperature steam. Additional autoclave exposures up to 40 hours are ongoing, including coatings which were proton irradiated up to 5 dpa. (authors)

36 MATERIALS SCIENCE↗

Diffraction of a shock wave by a compression corner; regular and single Mach reflection

The two dimensional, time dependent Euler equations which govern the flow field resulting from the injection of a planar shock with a compression corner are solved with initial conditions that result in either regular reflection or single Mach reflection of the incident planar shock. The Euler equations which are hyperbolic are transformed to include the self similarity of the problem. A normalization procedure is employed to align the reflected shock and the Mach stem as computational boundaries to implement the shock fitting procedure. A special floating fitting scheme is developed in conjunction with the method of characteristics to fit the slip surface. The reflected shock, the Mach stem, and the slip surface are all treated as harp discontinuities, thus, resulting in a more accurate description of the inviscid flow field. The resulting numerical solutions are compared with available experimental data and existing first-order, shock-capturing numerical solutions.

Vijayashankar, V. S.↗

Recovering magnetization distributions from their noisy diffraction data

We study, using simulated experiments inspired by thin-film magnetic domain patterns, the feasibility of phase retrieval in x-ray diffractive imaging in the presence of intrinsic charge scattering given only photon-shot-noise limited diffraction data. We detail a reconstruction algorithm to recover the sample's magnetization distribution under such conditions and compare its performance with that of Fourier transform holography. Concerning the design of future experiments, we also chart out the reconstruction limits of diffractive imaging when photon-shot-noise and the intensity of charge scattering noise are independently varied. This work is directly relevant to the time-resolved imaging of magnetic dynamics using coherent and ultrafast radiation from x-ray free-electron lasers and also to broader classes of diffractive imaging experiments which suffer noisy data, missing data, or both.

36 MATERIALS SCIENCE↗

New Approaches for Characterizing Sensor and Other Modern Complex Materials

Advances in understanding of sensor and other modern complex materials are often enabled by new research tools. This paper highlights three capability development themes used to identify new research tools to be provided to users of the U. S. Department of Energy’s Environmental Molecular Sciences Laboratory. These capability development directions address the importance of dynamic measurements in realistic environments, the need for increased resolution in three dimensional analyses as well as the importance of linking theory and experiment. Capability development involves expanding the range of operation for a number of important techniques, developing and applying new capabilities, and advancing methods of data processing. Examples of current developments are provided including those related to magnetic resonance, x-ray diffraction, application of a focused beam capability to fuel cell aging, and near real time analysis of XPS spectra.

30 DIRECT ENERGY CONVERSION↗

In situ Synchrotron X‐ray Metrology Boosted by Automated Data Analysis for Real‐time Monitoring of Cathode Calcination

Abstract Synchrotron X‐ray‐based in situ metrology is advantageous for monitoring the synthesis of battery materials, offering high throughput, high spatial and temporal resolution, and chemical sensitivity. However, the rapid generation of massive data poses a challenge to on‐site, on‐the‐fly analysis needed for real‐time process monitoring. Here, a weighted lagged cross‐correlation (WLCC) similarity approach is presented for automated data analysis, which merges with in situ synchrotron X‐ray diffraction metrology to monitor the calcination process of the archetypal nickel‐based cathode, LiNiO 2 . The WLCC approach, incorporating variables that account for peak shifts and width changes associated with structural transformations, enables rapid extraction of phase progression within 10 seconds from tens of diffraction patterns. Details are captured, from initial precursors to intermediates and the final layered LiNiO 2 , providing information for agile on‐site adjustments during experiments and complementing post hoc diffraction analysis by offering insights into early‐stage phase nucleation and growth. Expanding this data‐powered platform paves the way for real time calcination process monitoring and control, which is pivotal to quality control in battery cathode manufacturing.

36 MATERIALS SCIENCE↗

Preparation and luminescence properties of Ce{sup 3+} and/or Tb{sup 3+} doped LaPO{sub 4} nanofibers and microbelts by electrospinning

Ce{sup 3+} and/or Tb{sup 3+} doped LaPO{sub 4} nanofibers and microbelts have been prepared by a combination method of sol-gel process and electrospinning. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL), low voltage cathodoluminescence (CL) and time-resolved emission spectra as well as kinetic decays were used to characterize the resulting samples. SEM and TEM results indicate the as-formed precursor fibers and belts are smooth, and the as-prepared nanofibers and microbelts consist of nanoparticles. The doped rare-earth ions show their characteristic emission under ultraviolet excitation, i.e. Ce{sup 3+} 5d-4f and Tb{sup 3+5}D{sub 4}-{sup 7}F{sub J} (J=6-3) transitions, respectively. The energy transfer process from Ce{sup 3+} to Tb{sup 3+} in LaPO{sub 4}:Ce{sup 3+}, Tb{sup 3+} nanofibers was further studied by the time-resolved emission spectra. Under low-voltage electron beam excitation, LaPO{sub 4}:Ce{sup 3+}, Tb{sup 3+} microbelt phosphors have a higher intensity than that of nanofiber phosphors. - Graphical Abstract: Ce{sup 3+} and/or Tb{sup 3+} LaPO{sub 4} nanofibers and microbelts have been prepared by electrospinning. A systematic study on the optical properties of LaPO{sub 4}:Ce{sup 3+}, Tb{sup 3+} samples has shown that they are good green-emitting phosphors in fluorescent lamps and field emission displays. The energy transfer process from Ce{sup 3+} to Tb{sup 3+} in LaPO{sub 4}:Ce{sup 3+}, Tb{sup 3+} nanofibers is further studied by the time-resolved emission spectra.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

In Situ Diffraction from Levitated Solids Under Extreme Conditions—Structure and Thermal Expansion in the Eu 2 O 3 –ZrO 2 System

The accurate determination of structure and thermal expansion of refractory materials at temperatures above 1500°C is challenging. Here, for the first time, we demonstrate the ability to reliably refine the structure and thermal expansion coefficient of oxides at temperatures to 2200°C using in situ synchrotron diffraction coupled with aerodynamic levitation. Solid solutions in the Eu 2 O 3 –ZrO 2 binary system were investigated, including the high‐temperature order–disorder transformation in Eu 2 Zr 2 O 7 . The disordered fluorite phase is found to be stable above 1900°C, and a reversible phase transition to the pyrochlore phase is noticed during cooling. Site occupancies in Eu 2 Zr 2 O 7 show a gradual increase in disorder on both cation and anion sublattices with increasing temperature. The thermal expansion coefficients of all cubic solid solutions are relatively similar, falling in the range 8.6–12.0 × 10 −6 C −1 . These studies open new vistas for in situ exploration of complex structural changes in high‐temperature materials.

Maram, Pardha S.↗

B2 Grain Growth Behavior of a Ti-22Al-25Nb Alloy Fabricated by Hot Pressing Sintering

Grain growth behavior of a powder metallurgy (P/M) Ti-22Al-25Nb alloy was investigated by applying a series of isothermal treatment tests over a wide range of temperatures and holding times. An isothermal treatment scheme was conducted in the B2 phase region (1070-1110 °C) and α{sub 2} + B2 phase region (1010-1050 °C) at holding times of 10, 30 min, 1, 2, and 3 h, respectively. The effects of temperature and holding time on the microstructure evolution and microhardness of the P/M Ti-22Al-25Nb alloy at elevated temperatures were evaluated using optical microscope, scanning electron microscope, x-ray diffraction, and Vickers hardness test techniques. The results revealed that the alloy’s treated microstructure was closely linked to temperature and holding time, respectively. The change law of B2 grain growth with holding time and temperature can be well interpreted by the Beck equation and Hillert equation, respectively. The B2 grain growth exponent n and activation energy Q were acquired based on experimental data in the α{sub 2} + B2 and B2 phase regions. In addition, the grain growth contour map for the P/M Ti-22Al-25Nb alloy was constructed to depict variations in B2 grain size based on holding time and temperature.

36 MATERIALS SCIENCE↗

Influence of Time-of-Flight Chromatic Aberration on the Dynamics of Propagation of Pulsed Electron Beam in Ultrafast Electron Microscopy: A New Strategy for Better Temporal Resolution

A common strategy aimed at achieving a high temporal resolution in ultrafast electron microscopy and diffraction is based on the use of strong electrostatic fields in the accelerating gap to form fast electron pulses of ultrashort duration. In this work, the dynamics of the propagation of ultrashort photoelectron bunches is studied taking into account the time-of-flight chromatic aberration: the spread-out of electron pulses at the exit from the region of the accelerating electric field. The results of the calculation of the duration of photoelectron pulses taking into account Coulomb repulsion are presented. According to the analysis, the use of strong electrostatic fields in the accelerating gap for the formation of fast electron pulses of ultrashort duration is not a necessary condition for achieving the final high temporal resolution in the method of ultrafast electron microscopy. The modes of operation of ultrafast transmission electron microscope were found for which the temporal resolution increases with the growth of time-of-flight chromatic aberration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Giant Magnetoresistance in Electrochemical Deposited CoFe/Cu Multilayers Depending on Fe Concentration

Electrochemical deposition of CoFe/Cu multilayers were performed on Ti substrate from a single bath. 0.025, 0.05 and 0.1 M Fe concentration were used in electrolytes. The deposition potentials were selected − 1.5 V for magnetic layers and − 0.3 V for non-magnetic layers with respect to saturated calomel electrode. The current-time transients were obtained during the deposition process. The X-ray diffraction was used to define the structure of the multilayers. The multilayers were found to be face-centred cubic structure such as bulk Cu. Their lattice parameter and inter-planar distances values confirm this result. The magnetic measurements were performed at room temperature under 2 kOe external magnetic field. The results show that the saturation magnetization gradually increased from 27 to 50 emu/cm{sup 3} with increasing 0.025 to 0.05 M Fe concentration in electrolyte, and in the multilayer prepared from the electrolyte containing 0.1 M Fe concentration, this value drastically decreased to 18 emu/cm{sup 3}. The magnetoresistance measurements were carried out in magnetic fields in the range of ± 1.2 kOe. The high GMR value (18 %) and sensitivity (4.4 %/Oe) were obtained for this multilayer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, Electric and Magnetic Properties of Bi{sub 2}Sr{sub 2}Ag{sub 0.03}Ca{sub 1}Cu{sub 2}O{sub y} Ceramics Modified by Post-annealing

Polycrystalline Bi{sub 2}Sr{sub 2}Ag{sub 0.03}Ca{sub 1}Cu{sub 2}O{sub y} samples were fabricated using conventional solid-state reaction method. Then, post-annealing temperatures at 730, 780 and 830 {sup ∘}C were applied on samples while time was kept constant at 50 h. Both the x-ray diffraction (XRD) measurement and the scanning electron microscopy (SEM) showed that all samples have high amounts of Bi-2212 phase as the main phase, indicating that the selected starting composition is suitable to analyze the post-annealing effects on the flux pinning properties of Bi-2212 superconductors. In particular, flux pinning performance of Bi-2212 phase is observed from both the magnetic hysteresis loops and J{sub c} values calculated using Bean’s model. The highest J{sub c} value was obtained for sample which was not exposed to the post-annealing treatment. The results clearly show that post-annealing procedure in Bi{sub 2}Sr{sub 2}Ag{sub 0.03}Ca{sub 1}Cu{sub 2}O{sub y} system does not create artificial pinning centres, which lead to the improvements in J{sub c} at high magnetic fields.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interface Development in Cu-Based Structures Transient Liquid Phase (TLP) Bonded with Thin Al Foil Intermediate Layers

Proper bonding and assembly techniques are essential for fabrication of functional metal-based microdevices. Transient liquid phase (TLP) bonding is a promising technique for making enclosed metallic microchannel devices. In this paper, we report results of TLP bonding of Cu-based structures at temperatures between 550ºC and 610ºC with thin elemental Al foils as intermediate boding layers. In-situ X-ray diffraction was utilized to examine the structure of Cu/Al interface in real time, resulting in a proposed sequence of structural evolution of the Cu/Al/Cu TLP bonding interface region. Three different types of bonding interface structures, the “γ 1 structure”, the “eutectoid structure” (“E structure”), and the “E/γ 1 /E structure”, were observed through electron microscopy, and related to the proposed sequence of interfacial structural evolution. Tensile fracture tests were conducted on TLP bonded Cu/Al/Cu coupon assemblies. Hardness of the various phases within the bonding interface region was probed with instrumented nanoindentation. Results of mechanical testing were correlated to the structure of the bonding interface region. The present results provide an understanding of the structural evolution within the Cu/Al/Cu TLP bonding interface region, and offer guidance to future bonding of Cubased microsystems.

Chen, Ke↗

In situ {sup 1}H-TD-NMR: Quantification and microstructure development during the early hydration of alite and OPC

An in situ framework for {sup 1}H time-domain nuclear magnetic resonance analysis was developed and applied on alite and OPC hydration. Highly time-resolved quantitative data on the evolution of proton reservoirs during hydration was collected for up to 40 h. Reservoirs could be clearly assigned to mobile (mix water), intermediate (C-S-H) and rigid fractions (CH, ettringite). Comparison of determined fraction quantities with data from in situ XRD measurements and heat flow calorimetry show very good agreement. During alite hydration at 23 °C, a bulk water content of 4 H{sub 2}O in C{sub 1.7}SH{sub x} was confirmed. T2 relaxation times of the mobile fraction shifted towards shorter times from the start of the main reaction until the maximum of the heat flow. Microstructure evolution is nearly finished at that point in time. T2 relaxation times are severely shortened for iron-containing OPC, but are still evaluable.

36 MATERIALS SCIENCE↗

Influence of fuel ash on the recoverability of copper from the spent material of chemical looping combustion

Chemical looping combustion (CLC) is an advanced energy production technology that inherently separates the CO 2 generated. The oxygen needed for fuel conversion is supplied by the oxygen carrier. When using copper-based oxygen carriers, oxygen carrier attrition is a challenge to the process economics, unless the attrited copper that is mixed with fuel ash in the spent material can be recovered by, for instance, acid leaching. However, fuel ash may transform the attrited copper into certain complexes of low leachability (e.g., CuAl 2 O 4 ), hindering the copper recovery. In this study, the copper content in the spent material was first evaluated. The effects of ash composition and copper content on the occurrence mode of copper in spent material were predicted by thermodynamic modeling. Redox cycles of simulated spent materials based on various coal ashes were performed to reveal the characteristics of CuAl 2 O 4 /CuFe 2 O 4 formation. The CuO-Al 2 O 3 reaction was investigated under the temperatures and solid residence times experienced in CLC. The materials were analyzed by X-ray diffraction. The results suggest that the fuel ash with a high Al/Ca ratio may lower the recoverability of copper when the temperature is above 925 °C. The slow formation of CuFe 2 O 4 is not expected to affect the copper recovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗