SEARCH · Search NASA

Results for “error correction.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

All sources NASA NTRS DOE OSTI

NASA NTRS1994

Correlated environmental corrections in TOPEX/POSEIDON, with a note on ionospheric accuracy

Estimates of the effectiveness of an altimetric correction, and interpretation of sea level variability as a response to atmospheric forcing, both depend upon assuming that residual errors in altimetric corrections are uncorrelated among themselves and with residual sea level, or knowing the correlations. Not surprisingly, many corrections are highly correlated since they involve atmospheric properties and the ocean surface's response to them. The full corrections (including their geographically varying time mean values), show correlations between electromagnetic bias (mostly the height of wind waves) and either atmospheric pressure or water vapor of -40%, and between atmospheric pressure and water vapor of 28%. In the more commonly used collinear differences (after removal of the geographically varying time mean), atmospheric pressure and wave height show a -30% correlation, atmospheric pressure and water vapor a -10% correlation, both pressure and water vapor a 7% correlation with residual sea level, and a bit surprisingly, ionospheric electron content and wave height a 15% correlation. Only the ocean tide is totally uncorrelated with other corrections or residual sea level. The effectiveness of three ionospheric corrections (TOPEX dual-frequency, a smoothed version of the TOPEX dual-frequency, and Doppler orbitography and radiopositioning integrated by satellite (DORIS) is also evaluated in terms of their reduction in variance of residual sea level. Smooth (90-200 km along-track) versions of the dual-frequency altimeter ionosphere perform best both globally and within 20 deg in latitude from the equator. The noise variance in the 1/s TOPEX inospheric samples is approximately (11 mm) squared, about the same as noise in the DORIS-based correction; however, the latter has its error over scales of order 10(exp 3) km. Within 20 deg of the equator, the DORIS-based correction adds (14 mm) squared to the residual sea level variance.

Zlotnicki, V.↗

DOE OSTI2018

Corrigendum: Minimum information about a single amplified genome (MISAG) and a metagenome-assembled genome (MIMAG) of bacteria and archaea.

© 2018 Nature Publishing Group. All rights reserved. In the version of this article initially published, the author A. Murat Eren was listed as A.M. Eren. The corresponding affiliation was given as the Knapp Center for Biomedical Discovery, rather than Department of Medicine, University of Chicago, Chicago, Illinois, USA, and Marine Biological Laboratory, Woods Hole, Massachusetts, USA. The errors have been corrected in the HTML and PDF versions of the article as of 29 November 2017. In the version of this article initially published, the following acknowledgment was omitted: A.L. was supported by the Russian Science Foundation (grant number 14-50-00069). The error has been corrected in the HTML and PDF versions of the article as of 7 December 2017.

Bowers, Robert M↗

DOE OSTI2018

Corrigendum: Minimum information about a single amplified genome (MISAG) and a metagenome-assembled genome (MIMAG) of bacteria and archaea (Nature Biotechnology (2017) 35 (725-731) DOI: 10.1038/nbt.3893)

Bowers, RM↗

DOE OSTI2020

(U) Transport Corrections Implemented in SENSMG

Truncating the spherical harmonics expansion of the neutron scattering source in the Boltzmann transport equation leads to truncation error. Methods for approximately correcting for this truncation error are called transport corrections. The PARTISN multigroup discrete ordinates neutron transport code has three transport correction options. These options can be specified in the SENSMG multigroup neutron sensitivity code and passed to PARTISN for the neutron transport.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NASA NTRS1994

ATLAS solar pointing operations

The ATLAS-series of Spacelab missions are comprised of a diverse group of scientific instruments including instruments for studying the sun and how the sun's energy changes across an eleven-year solar cycle. The ATLAS solar instruments are located on one or more pallets in the Orbiter payload bay and use the Orbiter as a pointing platform for their examinations of the sun. One of the ATLAS instruments contained a sun sensor which allowed scientists and engineers on the ground to see the pointing error of the sun with respect to the instrument and correct for the error based upon the information coming from the ATLAS 1 and ATLAS 2 missions with particular attention given to identifying the sources of pointing discrepancies of the solar instruments and to describe the crew and ground controller procedures that were developed to correct for these discrepancies. The Orbiter pointing behavior from the ATLAS 1 and ATLAS 2 flights presented in this paper can be applied to future flights which use the Orbiter as a pointing platform.

Tyler, C. A.↗

DOE OSTI2019

Accounting for errors in quantum algorithms via individual error reduction

Abstract We discuss a surprisingly simple scheme for accounting (and removal) of error in observables determined from quantum algorithms. A correction to the value of the observable is calculated by first measuring the observable with all error sources active and subsequently measuring the observable with each error source reduced separately. We apply this scheme to the variational quantum eigensolver, simulating the calculation of the ground state energy of equilibrium H 2 and LiH in the presence of several noise sources, including amplitude damping, dephasing, thermal noise, and correlated noise. We show that this scheme provides a decrease in the needed quality of the qubits by up to two orders of magnitude. In near-term quantum computing, where full fault-tolerant error correction is too expensive, this scheme provides a route to significantly more accurate calculations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRS1972

Error-erasure decoding of product codes.

Two error-erasure decoding algorithms for product codes that correct all the error-erasure patterns guaranteed correctable by the minimum Hamming distance of the product code are given. The first algorithm works when at least one of the component codes is majority-logic decodable. The second algorithm works for any product code. Both algorithms use the decoders of the component codes.

Wainberg, S.↗

NASA NTRSDate not supplied

Characterization of OCO-2 and ACOS-GOSAT biases and errors for flux estimates

We characterize the magnitude of seasonally and spatially varying biases in the National Aeronautics and Space Administration (NASA) Orbiting Carbon Observatory-2 (OCO-2) Version 8 (v8) and the Atmospheric CO2 Observations from Space (ACOS) Greenhouse Gas Observing SATellite (GOSAT) version 7.3 (v7.3) satellite CO2 retrievals by comparisons to measurements collected by the Total Carbon Column Observing Network (TCCON), Atmospheric Tomography (ATom) experiment, and National Oceanic and Atmospheric Administration (NOAA) Earth System Research Laboratory (ESRL) and U. S. Department of Energy (DOE) aircraft, and surface stations. Although the ACOS-GOSAT estimates of the column averaged carbon dioxide (CO2) dry air mole fraction (XCO2) have larger random errors than the OCO-2 XCO2 estimates, and the space-based estimates over land have larger random errors than those over ocean, the systematic errors are similar across both satellites and surface types, 0.6 ± 0.1 ppm. We find similar estimates of systematic error whether dynamic versus geometric coincidences or ESRL/DOE aircraft versus TCCON are used for validation (over land), once validation and co-location errors are accounted for. We also find that areas with sparse throughput of good quality data (due to quality flags and preprocessor selection) over land have ~double the error of regions of high-throughput of good quality data. We characterize both raw and bias-corrected results, finding that bias correction improves systematic errors by a factor of 2 for land observations and improves errors by ~0.2 ppm for ocean. We validate the lowermost tropospheric (LMT) product for OCO-2 and ACOS-GOSAT by comparison to aircraft and surface sites, finding systematic errors of ~1.1 ppm, while having 2-3 times the variability of XCO2. We characterize the time and distance scales of correlations for OCO-2 XCO2 errors, and find error correlations on scales of 0.3 degrees, 5-10 degrees, and 60 days. We find comparable scale lengths for the bias correction term. Assimilation of the OCO-2 bias correction term is used to estimate flux errors resulting from OCO-2 seasonal biases, finding annual flux errors on the order of 0.3 and 0.4 PgC/yr for Transcom-3 ocean and land regions, respectively.

Susan S Kulawik↗

DOE OSTI2026

Erratum to The Scaling and Units of the Elastic Response Term for Rayleigh Waves that is Output by Computer Programs in Seismology (CPS)

This erratum corrects two notational errors and disambiguates a statement in the original article. These corrections apply to equations that follow Equation 9 in the text of the original.

58 GEOSCIENCES↗

NASA NTRS1974

Optical range and range rate estimation for teleoperator systems

Range and range rate are crucial parameters which must be available to the operator during remote controlled orbital docking operations. A method was developed for the estimation of both these parameters using an aided television system. An experiment was performed to determine the human operator's capability to measure displayed image size using a fixed reticle or movable cursor as the television aid. The movable cursor was found to yield mean image size estimation errors on the order of 2.3 per cent of the correct value. This error rate was significantly lower than that for the fixed reticle. Performance using the movable cursor was found to be less sensitive to signal-to-noise ratio variation than was that for the fixed reticle. The mean image size estimation errors for the movable cursor correspond to an error of approximately 2.25 per cent in range suggesting that the system has some merit. Determining the accuracy of range rate estimation using a rate controlled cursor will require further experimentation.

Shields, N. L., Jr.↗

NASA NTRS1990

Elimination of Gibbs' phenomena from error analysis of finite element results

This paper is one of a series on error analysis and correction of finite element solutions for plates and shells. The error analysis in the earlier papers used half-range double Fourier sine series for numerical harmonic analysis. The half-range formulas are simple to apply, but they can be inaccurate near the ends of the ranges of the independent variables. The Gibbs' phenomenon exhibited by half-range sine series in one independent variable has a two-dimensional analog; a classic example is the Navier solution in a double half-range sine series for the simply supported plate under a uniform load. A simple change of variables is introduced in the paper to improve the accuracy of the double Fourier sine series without adding complexity to the numerical analysis. The change of variables is applied to the problem of approximating a transverse load that is tabulated on a rectangular grid. A solution based on the change of variables is compared with results from the Navier solution for the simply supported plate problem and finite element results for the same problem.

Thurston, Gaylen A.↗

NASA NTRS1990

Study on fault-tolerant processors for advanced launch system

Issues related to the reliability of a redundant system with large main memory are addressed. The Fault-Tolerant Processor (FTP) for the Advanced Launch System (ALS) is used as a basis for the presentation. When the system is free of latent faults, the probability of system crash due to multiple channel faults is shown to be insignificant even when voting on the outputs of computing channels is infrequent. Using channel error maskers (CEMs) is shown to improve reliability more effectively than increasing redundancy or the number of channels for applications with long mission times. Even without using a voter, most memory errors can be immediately corrected by those CEMs implemented with conventional coding techniques. In addition to their ability to enhance system reliability, CEMs (with a very low hardware overhead) can be used to dramatically reduce not only the need of memory realignment, but also the time required to realign channel memories in case, albeit rare, such a need arises. Using CEMs, two different schemes were developed to solve the memory realignment problem. In both schemes, most errors are corrected by CEMs, and the remaining errors are masked by a voter.

Shin, Kang G.↗

NASA NTRS1992

Study on advanced information processing system

Issues related to the reliability of a redundant system with large main memory are addressed. In particular, the Fault-Tolerant Processor (FTP) for Advanced Launch System (ALS) is used as a basis for our presentation. When the system is free of latent faults, the probability of system crash due to nearly-coincident channel faults is shown to be insignificant even when the outputs of computing channels are infrequently voted on. In particular, using channel error maskers (CEMs) is shown to improve reliability more effectively than increasing the number of channels for applications with long mission times. Even without using a voter, most memory errors can be immediately corrected by CEMs implemented with conventional coding techniques. In addition to their ability to enhance system reliability, CEMs--with a low hardware overhead--can be used to reduce not only the need of memory realignment, but also the time required to realign channel memories in case, albeit rare, such a need arises. Using CEMs, we have developed two schemes, called Scheme 1 and Scheme 2, to solve the memory realignment problem. In both schemes, most errors are corrected by CEMs, and the remaining errors are masked by a voter.

Shin, Kang G.↗

DOE OSTI2016

Navigator alignment using radar scan

The various technologies presented herein relate to the determination of and correction of heading error of platform. Knowledge of at least one of a maximum Doppler frequency or a minimum Doppler bandwidth pertaining to a plurality of radar echoes can be utilized to facilitate correction of the heading error. Heading error can occur as a result of component drift. In an ideal situation, a boresight direction of an antenna or the front of an aircraft will have associated therewith at least one of a maximum Doppler frequency or a minimum Doppler bandwidth. As the boresight direction of the antenna strays from a direction of travel at least one of the maximum Doppler frequency or a minimum Doppler bandwidth will shift away, either left or right, from the ideal situation.

47 OTHER INSTRUMENTATION↗

DOE OSTI2016

The energy level alignment at metal–molecule interfaces using Wannier–Koopmans method

We apply a recently developed Wannier-Koopmans method (WKM), based on density functional theory (DFT), to calculate the electronic energy level alignment at an interface between a molecule and metal substrate. We consider two systems: benzenediamine on Au (111), and a bipyridine-Au molecular junction. The WKM calculated level alignment agrees well with the experimental measurements where available, as well as previous GW and DFT + Σ results. These results suggest that the WKM is a general approach that can be used to correct DFT eigenvalue errors, not only in bulk semiconductors and isolated molecules, but also in hybrid interfaces.

36 MATERIALS SCIENCE↗

DOE OSTI2018

Digital atomic scale fabrication an inverse Moore's Law – A path to atomically precise manufacturing

There is an exciting opportunity to start a second digital revolution that will supersede the first digital revolution in information technology (IT) as the primary driver of scientific, technological, and economic growth. This new revolution will be digital fabrication technology. Here, the digital IT revolution has been largely driven by digital algorithms such as error detection and correction and Moore's Law which has given us an exponential trend in product capabilities. However, the longstanding trend in improving manufacturing precision which has enabled Moore's Law simply cannot be continued much longer because we are running into the limits imposed by the quantized nature of matter. At this scale, matter can no longer be treated in an analogue fashion i.e. as an infinitely divisible medium, but must be treated as an integer number of discrete atomic distances, i.e. in a digital fashion. By embracing this digital nature of matter, we can conceive of a digital fabrication technology, where the digital processes are the making and breaking of chemical bonds, there is a digital address grid that is spatial in nature, and error detection and correction processes can be developed. This digital fabrication technology will have the similarly huge advantages over analog fabrication that digital IT has over analog IT. We remind the reader that effective digital technologies are not exclusively digital in their operation. Digital electronics is carried out by analog transistors that are embedded in circuitry designed to accept their output in a digital fashion. Digital fabrication technology is not synonymous with Atomically Precise Manufacturing (APM) but should lead to that important capability. Furthermore this digital fabrication technology will start a new exponential manufacturing trend that will replace Moore's law and will not be just for information processing and therefore will have an even larger impact than Moore's Law. Like any exponential trend Digital Fabrication will start slowly in a few niche markets, but the time for investing in the development of this new technology is now.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2024

Predicting ptychography probe positions using single-shot phase retrieval neural network

Ptychography is a powerful imaging technique that is used in a variety of fields, including materials science, biology, and nanotechnology. However, the accuracy of the reconstructed ptychography image is highly dependent on the accuracy of the recorded probe positions which often contain errors. These errors are typically corrected jointly with phase retrieval through numerical optimization approaches. When the error accumulates along the scan path or when the error magnitude is large, these approaches may not converge with satisfactory result. We propose a fundamentally new approach for ptychography probe position prediction for data with large position errors, where a neural network is used to make single-shot phase retrieval on individual diffraction patterns, yielding the object image at each scan point. The pairwise offsets among these images are then found using a robust image registration method, and the results are combined to yield the complete scan path by constructing and solving a linear equation. We show that our method can achieve good position prediction accuracy for data with large and accumulating errors on the order of 10 2 pixels, a magnitude that often makes optimization-based algorithms fail to converge. For ptychography instruments without sophisticated position control equipment such as interferometers, our method is of significant practical potential.

47 OTHER INSTRUMENTATION↗

DOE OSTI2021

GEDet: Detecting Erroneous Nodes with A Few Examples

Detecting nodes with erroneous values in real-world graphs re- mains challenging due to the lack of examples and various error scenarios. We demonstrate GEDet, an error detection engine that can detect erroneous nodes in graphs with a few examples. The GEDet framework tackles error detection as a few-shot node classification problem. We invite the attendees to experience the following unique features. (1) Few-shot detection. Users only need to provide a few examples of erroneous nodes to perform error detection with GEDet. GEDet achieves desirable accuracy with (a) a graph augmentation module, which automatically generates synthetic examples to learn the classifier, and (b) an adversarial detection module, which improves classifiers to better distinguish erroneous nodes from both cleaned nodes and synthetic examples. We show that GEDet significantly improves the state-of-the-art error detection methods. (2) Diverse error scenarios. GEDet profiles data errors with a built-in library of transformation functions from correct values to errors. Users can also easily “plug in” new error types or examples. (3) User-centric detection. GEDet supports (a) an active learning mode to engage users to verify detected results, and adapts the error detection process accordingly; and (b) visual interfaces to interpret and track detected errors.

Guan, Sheng↗