Search NASA⌕ Search

SEARCH · Search NASA

Results for “initial state”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Volcanism and igneous processes in small icy satellites

Evidence for the production of endogenic processes of the small Saturnian satellites by igneous activity of low melting point NH3-H2O magma heated radiogenically is presented. An initial state of the inner satellites is modeled as a homogeneous mixture of particulate silicates and ices. Conductive transport is assumed to have either combined with heat capacity in a mixture of crystalline phases, or to have been reduced by the presence of dust, defects, vitreous or amorphous phases, and clathrates. The extent to which a eutectic melt could form is calculated in terms of the volume percentage of melt, with all heating above 175 K going toward overcoming the latent heat of the eutectic mix. Mimas and Enceladus were treated as free from radiogenic heat sources, which were significant for Tethys, Dione, Rhea, and Iapetus. The migrations of inner materials to form surface structures and seal off the interiors of the moons are described.

Stevenson, D. J.↗

A numerical experiment on the equilibrium and stability of a rotating galactic bar

A self-consistent, three-dimensional numerical experiment is performed on an N-body system whose initial state is a realization of a certain theoretical model of a rotating triaxial galaxy. The model is a stellar-dynamical counterpart of a uniformly rotating polytrope of index equal to 0.5. The aim of the experiment is to study the equilibrium of the system and, in particular, to test its stability. The experimental system behaves in the mean like a realization of the theoretical model for at least seven crossing times. The principal departure of the system from equilibrium is an oscillation which is identified as a radial pulsation. There is no indication in its behavior that the system is unstable with respect to anu mode with an e-folding time shorter than or of the order of two crossing times. Certain changes that occur in the state of the system are interpreted, with the aid of the theoretical model, as secular changes which result from a slight failure of our numerical methods to conserve the mass, energy, and angular momentum of the system; these effects are small enough that they do not vitiate the experiment on a dynamical time scale.

Miller, R. H.↗

The effect of model resolution and satellite sounding data on GLAS model forecasts

The effect of horizontal model resolution on satellite data impact has been studied for two versions of the GLAS second-order general circulation model: the C-model with a 4-deg latitude by 5-deg longitude resolution and the F-model with a 2.5-deg latitude and 3-deg longitude resolution. It is found that the 48-72 h forecast skill of the GLAS model was significantly improved by the increased resolution. Initial state differences between the SAT and NOSAT cycles using the F-model were on the average smaller than the corresponding differences with the C-model. However, the F-model cycle differences exhibited a smaller scale structure and, in some cases, larger gradients.

Atlas, R.↗

On identifiability of flexible structure parameters

This report investigates the identifiability of modal parameters of flexible structures. Expressions are derived for Cramer-Rao lower bounds for the modal parameters, that is, frequencies, damping ratios and mode shapes or slopes. The optimal initial state, which maximizes the trace of the Fisher information matrix in the absence of persistent input, is obtained. The concepts discussed are applied to a finite-element model of the 122 meter hoop/column antenna. The numerical results show that the identifiability of the structural frequencies is excellent, followed by that of the damping ratios and the mode-slopes.

Joshi, S. M.↗

Numerical studies of major and minor stratospheric warmings caused by orographic forcing

A primitive equation spectral model using spherical harmonics is formulated to study dynamic interactions between the troposphere and stratosphere in association with sudden stratospheric warmings. Using sigma coordinates for five tropospheric layers and log-pressure coordinates for 26 stratospheric and mesospheric layers, separate model equations for each system are combined to form single matrix governing equations. The gradual introduction of large scale topography to balanced initial states representative of observed mean winter conditions in the Northern Hemisphere is used for the generation of planetary waves during 40-day time integrations. Results of these integrations indicate that stratospheric warmings can be simulated by this orographic forcing and that mean momentum flux divergence due to zonal mean motion appears to be an essential mechanism of these simulated sudden warmings. It was found that the strength of the polar night jet can be a determining factor whether a warming becomes 'major' or 'minor'.

Koermer, J. P.↗

Improved turbulence models based on large eddy simulation of homogeneous, incompressible turbulent flows

The physical bases of large eddy simulation and subgrid modeling are studied. A subgrid scale similarity model is developed that can account for system rotation. Large eddy simulations of homogeneous shear flows with system rotation were carried out. Apparently contradictory experimental results were explained. The main effect of rotation is to increase the transverse length scales in the rotation direction, and thereby decrease the rates of dissipation. Experimental results are shown to be affected by conditions at the turbulence producing grid, which make the initial states a function of the rotation rate. A two equation model is proposed that accounts for effects of rotation and shows good agreement with experimental results. In addition, a Reynolds stress model is developed that represents the turbulence structure of homogeneous shear flows very well and can account also for the effects of system rotation.

Bardino, J.↗

Performance of the Lester battery charger in electric vehicles

Tests are performed on an improved battery charger. The primary purpose of the testing is to develop test methodologies for battery charger evaluation. Tests are developed to characterize the charger in terms of its charge algorithm and to assess the effects of battery initial state of charge and temperature on charger and battery efficiency. Tests show this charger to be a considerable improvement in the state of the art for electric vehicle chargers.

Vivian, H. C.↗

Time scales for the decay of induced large-scale magnetic fields in the Venus ionosphere

Observations made with the aid of a magnetometer on the Pioneer Venus Orbiter have shown large-scale horizontal magnetic fields in the dayside ionosphere of Venus. According to Cloutier and Daniell (1981), the observed magnetic structures may be quasi-steady features produced by an ionospheric current system driven by solar wind interaction. Russell et al. (1983) have suggested that the altitude profiles of the horizontal field on different orbits exhibit a pattern which can be interpreted as phases in the temporal evolution of an initial state in which the ionosphere was permeated with magnetosheath-like fields. The present investigation is concerned with the argument in favor of a temporal versus spatial explanation for some of the observed field structure. A calculation indicates that the diffusion time for ionospheric fields is long enough to justify attributing the observed fields to the 'memory' of the Venus ionosphere in certain regions.

Luhmann, J. G.↗

Design of the hybrid automated reliability predictor

The design of the Hybrid Automated Reliability Predictor (HARP), now under development at Duke University, is presented. The HARP approach to reliability prediction is characterized by a decomposition of the overall model into fault-occurrence and fault-handling sub-models. The fault-occurrence model is a non-homogeneous Markov chain which is solved analytically, while the fault-handling model is a Petri Net which is simulated. HARP provides automated analysis of sensitivity to uncertainties in the input parameters and in the initial state specifications. It then produces a predicted reliability band as a function of mission time, as well as estimates of the improvement (narrowing of the band) to be gained by a specified amount of reduction in uncertainty.

Geist, R.↗

Multiple parent bodies of ordinary chondrites

Thermal histories of chondrite parent bodies are calculated from an initial state with material in a powder-like form, taking into account the effect of consolidation state on thermal conductivity. The very low thermal conductivity of the starting materials makes it possible for a small body with a radius of less than 100 km to be heated by several hundred degrees even if long-lived radioactive elements in chondritic abundances are the only source of heat. The maximum temperature is determined primarily by the temperature at which sintering of the constituent materials occurs. The thermal state of the interior of a chondrite parent body after sintering has begun is nearly isothermal. Near the surface, however, where the material is unconsolidated and the thermal conductivity is much lower, the thermal gradient is quite large. This result contradicts the conventional 'onion-shell' model of chondrite parent bodies. But because the internal temperature is almost constant through the whole body, it supports a 'multiple-parent bodies' model, according to which each petrologic type of chondrite comes from a different parent body.

Yomogida, K.↗

Some New Mathematical Methods for Variational Objective Analysis

New and/or improved variational methods for simultaneously combining forecast, heterogeneous observational data, a priori climatology, and physics to obtain improved estimates of the initial state of the atmosphere for the purpose of numerical weather prediction are developed. Cross validated spline methods are applied to atmospheric data for the purpose of improved description and analysis of atmospheric phenomena such as the tropopause and frontal boundary surfaces.

Wahba, G.↗

Experiments on the Assimilation of Patches of Data Using a Barotropic Model

Experiments were performed to examine the impact of adopting various procedures in the assimilation of patches of data during the progress of a numerical forecast. A barotropic model described by Takacs and Balgovind, 1983 is used for the experiments. The model is global and its discretization is similar to the GLA Fourth Order GCM. The effect of orography is included in the model. The experiments are of an identical twin kind. The nature run starts from global fields of wind (u and v) and height (h) at 300 mb. They are real data of January, 1979 OOZ which were interpolated from the adjacent sigma levels of the GLA GCM and then balanced by the bounded derivative method. From this initial state a 6 day forecast is performed. At intervals of 3 hours this information is saved over sectors of 60 width in longitude, from the south pole to the north pole, to simulate data coverage and observational frequency of a polar orbiting satellite.

Semazzi, F. H. M.↗

Dynamic Considerations for Control of Closed Life Support Systems

Reliability of closed life support systems depend on their ability to continue supplying the crew's needs during perturbations and equipment failures. The dynamic considerations interact with the basic static design through the sizing of storages, the specification of excess capacities in processors, and the choice of system initial state. A very simple system flow model was used to examine the possibilities for system failures even when there is sufficient storage to buffer the immediate effects of the perturbation. Two control schemes are shown which have different dynamic consequences in response to component failures.

Babcock, P. S.↗

Characteristic Elastic Systems of Time-Limited Optimal Maneuvers

Optimizing an elastic system and its active control is discussed. Maneuvers from an initial state to a final state in a finite time interval are considered. An active generalized control force that accomplishes the desired maneuver of a prespecified system is optimal if it minimizes a given quadratic cost function. By also varying a set of design parameters, the elastic system can be determined so as to further minimize the cost function. Here, the elastic system that minimizes the actual control cost is compared with the system that minimizes the ratio of actual cost to the cost of optimally maneuvering a rigid system of the same inertial properties. It is shown that an elastic system corresponding to an extremum of the ratio is actually a characteristic of the time-limited maneuver. Because both the spatial domain and the time interval are fixed, a characteristic elastic system is tuned to the specified temporal boundary conditions. The implication for rest-to-rest, spinup, and spin reversal maneuvers of spacecraft is that the optimal control for a characteristic elastic spacecraft is identical to the optimal control for the same spacecraft as if it were rigid.

Hale, A. L.↗

Observable in the reversible reaction gamma + d yields n + p

Calculations are presented on the effect of the two-body charge and current density effects on the observables in the photodisintegration of a deuteron. The computations are performed in a cartesian coordinate system, initially for gamma rays plane-polarized in the x-direction. Unpolarized photons are treated with an incoherent superposition of transition amplitudes for gamma rays polarized in the x- and y- directions. Account is taken of recoil and interaction energies after an initial state is defined. Consideration is focused on the cross section, polarization, and asymmetry of the reaction at low and medium energy incident gamma rays.

Rustgi, M. L.↗

Spectrum of squeezing in resonance fluorescence

A spectral analysis of the squeezing in resonance fluorescence is accomplished via a study of a phase sensitive correlation function. In the case of resonance fluorescence from a two-level system, the initial state is a coherent state for the laser mode, a vacuum for the other states of the radiation field, and the atoms in the lower level. Maximum squeezing for resonance excitation is obtained for near resonant frequencies of the fluorescent light. Possible experimental configurations are discussed in order to detect spectral squeezing.

Collett, M. J.↗

Influence of radiative heating and cumulus convection on development of mean monsoon circulation in July

Numerical simulations of July mean monsoon circulation in the tropics are described. The model used in the simulations was based on a series of primitive equations for the combined effects of variations of solar radiation, radiative diurnal warming, and large-scale and deep cumulus condensation, and the kinematic effects of topography. The initial states of the model were derived from the observed mean distributions of pressure and humidity. Analysis of the numerical results showed that the large-scale features of the mean July monsoon circulation in the tropics are created mainly by differential diabatic heating under the influence of the specific topography. The time necessary to establish the large scale features was only about 5 days when the diurnal variation of solar radiation was taken into account. Graphic illustrations of the simulated mean July flow conditions are provided.

Kuo, H. L.↗

Modeling of zero gravity venting: Studies of two-phase heat transfer under reduced gravity

The objective is to predict the pressure response of a saturated liquid-vapor system when undergoing a venting or depressurization process in zero gravity at low vent rates. An experimental investigation of the venting of cylindrical containers partially filled with initially saturated liquids was previously conducted under zero-gravity conditions and compared with an analytical model which incorporated the effect of interfacial mass transfer on the ullage pressure response during venting. A new model is presented to improve the estimation of the interfacial mass transfer. Duhammel's superposition integral is incorporated to approximate the transient temperature response of the interface, treating the liquid as a semi-infinite solid with conduction heat transfer. Account is also taken of the condensation taking place within the bulk of a saturated vapor as isentropic expansion takes place. Computational results are presented for the venting of R-11 from a given vessel and initial state for five different venting rates over a period of three seconds, and compared to prior NASA experiments. An improvement in the prediction of the final pressure takes place, but is still considerably below the measurements.

Merte, H., Jr.↗