Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
DOE OSTI2012

The Influence of Grain Boundary Type upon Damage Evolution at Grain Boundary Interfaces

In a prior work, it was found that grain boundary structure strongly influences damage evolution at grain boundaries in copper samples subjected to either shock compression or incipient spall. Here, several grain boundaries with different grain boundary structures, including a {Sigma}3 (10-1) boundary, are interrogated via conventional transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM) to investigate the effects of atomic-scale structural differences on grain boundary strength and mobility. Boundaries are studied both before and after shock compression at a peak shock stress of 10 GPa. Results of the TEM and HRTEM work are used in conjunction with MD modeling to propose a model for shock-induced damage evolution at grain boundary interfaces that is dependent upon coincidence.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Garnet-Based Advanced Solid-State Batteries

I will start by giving an overview of active research activities in my research group located at University of Maryland Energy Research Center, including wood materials toward sustainability, 3000K high temperature materials and processing (Science2018), wood nanotechnologies (Nature2018), beyond-Li ion batteries (solid state, Na-ion). Then I will focus on our recent development on garnet-based solid-state Li-metal batteries including interface engineering to improve the wetting between Li metal anode and Garnet solid-state electrolyte (Nature Materials 2016; Science Advances 2017); Garnet based 3D Li ion conductive framework (bilayer, trilayer) toward high energy density Li-S batteries (EES 2017); Garnet nanofiber based flexible, hybrid electrolyte with a high Li ion conductivity (PNAS 2016), and In-situ neutron depth profiling technique in understanding Li-garnet and CNT-garnet interfaces (JACS 2016).

Hu, Liangbing↗
DOE OSTI2019

Processing of Dilute Mg–Zn–Mn–Ca Alloy/Nb Multilayers by Accumulative Roll Bonding

Recent advancements in the severe plastic deformation process called accumulative roll bonding (ARB) can help to address the long-standing need for manufacturing lightweight, high-strength Mg sheet materials. However, the fabrication of Mg alloy-based laminates via ARB remains a challenge due to the intrinsically poor formability of Mg. Herein, it is shown that Mg-based composite laminates with refined layers can be fabricated via several room-temperature ARB cycles with appropriate intermediate annealing and alloy selection. The final laminates made here consist of equal volume fractions of a dilute Mg–Zn–Mn–Ca alloy phase and a pure Nb phase with fine 150 μm layer thicknesses. Deformation texture evolution in both phases within the composite is analyzed via neutron diffraction measurements taken at different stages in the process. The analysis suggests that the annealing step recrystallizes the Mg-alloy phase. It is also shown that for both phases, the stabilized deformation textures within the composite correspond to the classic stable textures of the individual constituents. Polycrystal texture modeling implies that {10–12} <-1011> extension twinning developed in the Mg alloy during rolling.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Evidence for Interfacial Octahedral Coupling as a Route to Enhance Magnetoresistance in Perovskite Oxide Superlattices

Engineering octahedral rotations in oxide heterostructures is a promising route for controlling magnetic properties in perovskites, with recent work focusing on magnetic-ordering temperatures and magnetic anisotropies. Here the effects of interfacial octahedral coupling on magnetoresistance are demonstrated in a series of (La 0.7 Sr 0.3 MnO 3 ) n /(LaFeO 3 ) 10 superlattices grown on (001)- and (111)-oriented SrTiO 3 substrates. The different crystallographic orientations allow for the interfacial octahedral connectivity to be tuned, with weaker interfacial coupling present at the (001)-oriented than the (111)-oriented structures as revealed by density functional theory calculations. In n = 14 superlattices, the effect of orientation on the physical properties is minimal with both (001)- and (111)-oriented samples exhibiting similar magnetoresistance. As the fraction of interfacial volume within the LSMO layers is increased by decreasing n, the magnetoresistive behavior of the samples diverges with significantly larger magnetoresistance magnitudes present in the (111)-oriented superlattices. Furthermore, the results are consistent with octahedral coupling playing a greater role in the functional properties at (111)-heterointerfaces and demonstrate a structure-driven approach to tuning interfacial magnetoresistance in complex-oxide heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Interfacial Issues and Modification of Solid Electrolyte Interphase for Li Metal Anode in Liquid and Solid Electrolytes

Abstract The high energy density required for the next generation of lithium batteries will likely be enabled by a shift toward lithium metal anode from the conventional intercalation‐based anode such as graphite. However, several critical challenges for Li metal originate from its highly reactive nature and the hostless reaction of deposition and stripping impede the practical use of Li metal as an anode. The role of the solid electrolyte interphase (SEI) is very important for the Li metal anode where the SEI must protect the dynamically changing surface of the Li metal. Since the SEI‐generating reaction mechanisms for the two different electrolyte systems, liquid and solid, are considerably different, the SEI layers formed between the Li metal and the electrolytes in the two electrolyte systems have substantially different properties, causing different interfacial issues. Inhibition of the interfacial problems requires different strategies to reinforce the SEI layer for each of the electrolyte systems. However, the differences in the two electrolyte systems have not been clearly compared in the prior literature. In this report, the interfacial issues for the two different electrolyte systems are compared and different strategies for SEI modification are provided to overcome the issues.

25 ENERGY STORAGE↗
DOE OSTI2025

Quantifying and visualizing the microscopic degrees of freedom of grain boundaries in the Wigner–Seitz cell of the displacement-shift-complete lattice

Here we introduce a grain boundary (GB) translation vector, t ws , to describe and quantify the domain of the microscopic degrees of freedom of GBs. It has long been recognized that for fixed macroscopic degrees of freedom of a GB there exists a large multiplicity of states characterized by different relative grain translations. More recently another degree of freedom, [n], the number of GB atoms, has emerged and is now recognized as an equally important component of GB structural multiplicity. In this work, we show that all GB microstates can be uniquely characterized by their value of t ws , which is located within the Wigner–Seitz (WS) cell of the Displacement-Shift-Complete lattice (DSCL) of the GB. The GB translation vector captures information about both the translation state and the number of GB atoms. We show that the density of GB microstates inside the WS cell of the DSCL is not uniform and can form clusters that correspond to different GB phases. Further, the vectors connecting the centers of the clusters correspond to the Burgers vectors of GB phase junctions, which can be predicted without building the junctions. Using t ws , we quantify GB excess shear and argue that it is defined up to a DSCL vector, which has implications for thermodynamic equilibrium conditions. Additionally, this work generalizes the definition of the number of GB atoms [n] to asymmetric boundaries.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Groundwater flow and heat transport for systems undergoing freeze-thaw: Intercomparison of numerical simulators for 2D test cases

In high-elevation, boreal and arctic regions, hydrological processes and associated water bodies can be strongly influenced by the distribution of permafrost. Recent field and modeling studies indicate that a fully-coupled multidimensional thermo-hydraulic approach is required to accurately model the evolution of these permafrost-impacted landscapes and groundwater systems. However, the relatively new and complex numerical codes being developed for coupled non-linear freeze-thaw systems require verification. Here in this paper, this issue is addressed by means of an intercomparison of thirteen numerical codes for two-dimensional test cases with several performance metrics (PMs). These codes comprise a wide range of numerical approaches, spatial and temporal discretization strategies, and computational efficiencies. Results suggest that the codes provide robust results for the test cases considered and that minor discrepancies are explained by computational precision. However, larger discrepancies are observed for some PMs resulting from differences in the governing equations, discretization issues, or in the freezing curve used by some codes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Fine-tuning the release of molecular guests from mesoporous silicas by controlling the orientation and mobility of surface phenyl substituents

Phenyl-functionalized mesoporous silica materials were used to explore the effect of non-covalent interactions on the release of Ibuprofen into simulated body fluid. Variations in orientation and conformational mobility of the surface phenyl groups were introduced by selecting different structural precursors: a rigid upright orientation was obtained using phenyl groups directly bound to surface Si atoms (Ph-MSN), mobile groups were produced by using ethylene linkers to connect phenyl groups to the surface (PhEt-MSN), and groups co-planar to the surface were obtained by synthesizing a phenylene-bridged periodic mesoporous organosilica (Ph-PMO). The Ibuprofen release profiles from these materials and non-functionalized mesoporous silica nanoparticles (MSN) were analyzed using an adsorption-diffusion model. The model provided kinetic and thermodynamic parameters that evidenced fundamental differences in drug-surface interactions between the materials. All phenyl-bearing materials show lower Ibuprofen initial release rates than bare MSN. The conformationally locked Ph-MSN and Ph-PMO have stronger interactions with the drug (negative ΔG of adsorption) than the flexible PhEt-MSN and bare MSN (positive ΔG of adsorption). These differences in strength of adsorption are consistent with differences between interaction geometries obtained from DFT calculations. B3LYP-D3-optimized models show that π-π interactions contribute more to drug adsorption than H-bonding with silanol groups. Here, the results suggest that the type and geometry of interactions control the kinetics and extent of drug release, and should therefore serve as a guide to design new drug delivery systems with precise release behaviors customized to any desired target.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Quantifying heterogeneous deformation in grain boundary regions on shock loaded tantalum using spherical and sharp tip nanoindentation

Grain boundaries play an important role in the overall mechanical performance of metals and alloys; however, isolating the effects of individual grain boundaries remains rather challenging experimentally. In this work, wire-feed, electron beam additively manufactured tantalum is studied under shock loading conditions generating incipient spall damage. Three grain boundaries aligned parallel to the shock direction were isolated inside a single sample. Postmortem metallography showed voids preferentially appeared on two of the three grain boundaries which had high misorientation angles > 30° compared to the third grain boundary with a relatively lower misorientation angle < 10°. Nanoindentation in grain boundary regions for both pyramidal and spherical tips showed characteristically different strain hardening trends for each grain boundary. Significant local strain hardening is present on both sides of one high angle grain boundary, while strain softening is captured at the other high angle grain boundary. A negligible trend of either hardening or softening is shown in the vicinity of the single low angle grain boundary. As a result, this leads to the conclusion that the trend of strain hardening/softening in grain boundary regions is not monotonically correlated to the susceptibility of specific grain boundaries to an increased propensity for void damage.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The detrimental effect of elemental contaminants when using B additions to improve the creep properties of a Ni-based superalloy

The effect of Si contamination when using B to improve the creep properties of a Ni-based superalloy was investigated using advanced characterization techniques and first-principles simulations on alloys with high and low B levels with varying Si contents. The positive effect of B segregation along grain boundaries on the creep properties was mitigated by the presence of Si which showed a similar segregation preference. Density functional theory calculations were used for validation by calculating grain boundary cleavage energies. Silicon was shown to decrease grain boundary cohesion which offsets the positive effect of B.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Putidaredoxin Binds to the Same Site on Cytochrome P450cam in the Open and Closed Conformation

Cytochrome P450 CYP101A1 (P450cam) hydroxylates camphor by receiving two distinct electrons from its unique reductase, putidaredoxin (Pdx). Upon binding ferric P450cam, Pdx is now known to trigger a conformational change in the enzyme. This Pdx-induced conversion may provide the trigger to coordinate enzyme turnover and protect the enzyme from oxidative damage, so the interactions responsible for this conversion are of significant interest at present. This proposed role for Pdx requires that its interactions with P450cam be different for the open and closed conformations. Here, we show that the binding thermodynamics of Pdx does indeed differ in the predicted way when the conformation of P450cam is held in different states. However, double electron–electron resonance measurements of intermolecular distances in the Pdx/P450cam complex show that the geometry of the complex is nearly identical for the open and closed states of P450cam. These studies show that Pdx appears to make a single distinct interaction with its binding site on the enzyme and triggers the conformational change through very subtle structural interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ionic Control over Ferroelectricity in 2D Layered van der Waals Capacitors

The van der Waals layered material CuInP 2 S 6 features interesting functional behavior, including the existence of four uniaxial polarization states, polarization reversal against the electric field through Cu ion migration, a negative-capacitance regime, and reversible extraction of Cu ions. At the heart of these characteristics lies the high mobility of Cu ions, which also determines the spontaneous polarization. Therefore, Cu migration across the lattice results in unusual ferroelectric behavior. Here, we demonstrate how the interplay of polar and ionic properties provides a path to ionically controlled ferroelectric behavior, achieved by applying selected DC voltage pulses and subsequently probing ferroelectric switching during fast triangular voltage sweeps. Using current measurements and theoretical calculations, we observe that increasing DC pulse duration results in higher ionic currents, the buildup of an internal electric field that shifts polarization loops, and an increase in total switchable polarization by ~50% due to the existence of a high polarization phase which is stabilized by the internal electric field. Apart from tuning ferroelectric behavior by selected square pulses, hysteretic polarization switching can even be entirely deactivated and reactivated, resulting in three-state systems where polarization switching is either inhibited or can be performed in two different directions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Resolving the Electron Plume within a Scanning Electron Microscope

Scanning electron microscopy (SEM), a century-old technique, is today a ubiquitous method of imaging the surface of nanostructures. However, most SEM detectors simply count the number of secondary electrons from a material of interest, and thereby overlook the rich material information contained within them. Here, by simple modifications to a standard SEM tool, we resolve the momentum and energy information on secondary electrons by directly imaging the electron plume generated by the electron beam of the SEM. Leveraging these spectroscopic imaging capabilities, our technique is able to image lateral electric fields across a prototypical silicon p–n junctions and to distinguish differently doped regions, even when buried beyond depths typically accessible by SEM. Intriguingly, the subsurface sensitivity of this technique reveals unexpectedly strong surface band bending within nominally passivated semiconductor structures, providing useful insights for complex layered component designs, in which interfacial dynamics dictate device operation. Further, these capabilities for noninvasive, multimodal probing of complicated electronic components are crucial in today’s electronic manufacturing but is largely inaccessible even with sophisticated techniques. These results show that seemingly simple SEM can be extended to probe complex and useful material properties.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electron Sextets as Optically Addressable Molecular Qubits: Triplet Carbenes

There is a growing demand in quantum information science and sensing for electron spin purification and readout via a spin-optical interface. This technique, known as optically detected magnetic resonance (ODMR), has been applied to diamond-NV centers and transition-metal complexes. Metal-free counterparts of these optically addressable spin qubits promise to be cheaper, more sustainable color centers with prolonged polarization lifetimes. However, progress has been hindered by the low ODMR signals of carbon-based π-diradicals, partly due to the lack of a ground singlet-to-triplet intersystem crossing (ISC). In this work, we propose exploring organic systems that are even more electron-deficient: electron sextets. Using triplet carbenes as an example, we illustrate how the ground singlet-triplet gap can be widened beyond thermal energy with the associated singlet-to-triplet ISC made available by vibronic effects. Through careful molecular engineering, this ISC can occur at a rate similar to and with an opposite spin selectivity from the excited-state ISC well-established in π-diradicals, unlocking a new ODMR pathway with potential signal gains. Persistent triplet carbenes are a renascent field, with multiple stable molecules being isolated in the past five years. To motivate further development of its emissive properties, we illustrate our design in three realistic carbene candidates that incorporate existing strategies for carbene stabilization. Furthermore, we believe that a new realm of quantum materials can be uncovered by expanding our scope toward stable electron sextets.

Carbene compounds↗
DOE OSTI2016

Spin-polarized surface resonances accompanying topological surface state formation

Topological insulators host spin-polarized surface states born out of the energetic inversion of bulk bands driven by the spin-orbit interaction. Here we discover previously unidentified consequences of band-inversion on the surface electronic structure of the topological insulator Bi 2 Se 3 . By performing simultaneous spin, time, and angle-resolved photoemission spectroscopy, we map the spin-polarized unoccupied electronic structure and identify a surface resonance which is distinct from the topological surface state, yet shares a similar spin-orbital texture with opposite orientation. Its momentum dependence and spin texture imply an intimate connection with the topological surface state. Calculations show these two distinct states can emerge from trivial Rashba-like states that change topology through the spin-orbit-induced band inversion. As a result, this work thus provides a compelling view of the coevolution of surface states through a topological phase transition, enabled by the unique capability of directly measuring the spin-polarized unoccupied band structure.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Dual phase patterning during a congruent grain boundary phase transition in elemental copper

The phase behavior of grain boundaries can have a strong influence on interfacial properties. Little is known about the emergence of grain boundary phases in elemental metal systems and how they transform. Here, we observe the nanoscale patterning of a grain boundary by two alternating grain boundary phases with distinct atomic structures in elemental copper by atomic resolution imaging. The same grain boundary phases are found by computational grain boundary structure search indicating a first-order transformation. Finite temperature atomistic simulations reveal a congruent, diffusionless transition between these phases under ambient pressure. The patterning of the grain boundary at room temperature is dominated by the grain boundary phase junctions separating the phase segments. Our analysis suggests that the reduced mobility of the phase junctions at low temperatures kinetically limits the transformation, but repulsive elastic interactions between them and disconnections could additionally stabilize the pattern formation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Evidence for a robust sign-changing s-wave order parameter in monolayer films of superconducting Fe (Se,Te)/Bi 2 Te 3

The Fe-based superconductor Fe (Se,Te) combines non-trivial topology with unconventional superconductivity and may be an ideal platform to realize exotic states such as high-order topological corner modes and Majorana modes. Thin films of Fe (Se,Te) are particularly important for device fabrication and phase sensitive transport measurements. While bulk Fe (Se,Te) has been extensively studied, the nature of the superconducting order parameter in the monolayer limit has not yet been explored. In this work, we study monolayer films of Fe (Se,Te) on Bi 2 Te 3 with scanning tunneling spectroscopy. Monolayer Fe (Se,Te)/Bi 2 Te 3 heterostructures host a multigap superconducting state that strongly resembles the bulk. Analysis of the phase-referenced quasiparticle interference signal reveals a sign-changing s-wave order parameter similar to the bulk as well as a unique pattern of sign changes which have not been observed in the bulk. Our work establishes monolayer Fe (Se,Te)/Bi 2 Te 3 as a robust multi-band unconventional superconductor and sets the stage for explorations of non-trivial topology in this highly-tunable system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗