Search NASA⌕ Search

SEARCH · Search NASA

Results for “interlayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Reversible intercalation of ammonia molecules into a layered double hydroxide structure without exchanging nitrate counter-ions

A zinc/aluminum LDH was precipitated with recycled ammonia from a chemical vapor deposition reaction. The LDH presented a crystalline phase with basal distance of 8.9 A, typical for nitrate-containing LDHs, and another phase with a basal distance of 13.9 A. Thermal treatment at 150 {sup o}C eliminated the phase with the bigger basal distance leaving only the anhydrous nitrate-intercalated LDH structure with 8.9 A. Intense N-H stretching modes in the FTIR spectra suggested that the expansion was due to intercalation of ammonia in the form of [NH{sub 4}(NH{sub 3}){sub n}]{sup +} species. When additional samples were precipitated with pure ammonia, the conventional LDH nitrate structure was obtained (8.9 A basal distance) at pH=7, as well as a pure crystalline phase with 13.9 A basal distance at pH=10 due to ammonia intercalation that can be removed by heating at 150 {sup o}C or by stirring in acetone, confirming a unusual sensu stricto intercalation process into a LDH without exchanging nitrate ions. - Graphical abstract: LDH-nitrate precipitated with ammonia expands the interlayer space if ammonia is bubbled up to pH 10. The basal distance decreased when the compound was heated at 150 {sup o}C or stirred in acetone. Nitrate ions are not exchanged.

36 MATERIALS SCIENCE↗

Solubility and release of fenbufen intercalated in Mg, Al and Mg, Al, Fe layered double hydroxides (LDH): The effect of Eudragit S 100 covering

Following different preparation routes, fenbufen has been intercalated in the interlayer space of layered double hydroxides with Mg{sup 2+} and Al{sup 3+} or Mg{sup 2+}, Al{sup 3+} and Fe{sup 3+} in the layers. Well crystallized samples were obtained in most of the cases (intercalation was not observed by reconstruction of the MgAlFe matrix), with layer heights ranging between 16.1 and 18.8 A. The presence of the LDH increases the solubility of fenbufen, especially when used as a matrix. The dissolution rate of the drug decreases when the drug is intercalated, and is even lower in those systems containing iron; release takes place through ionic exchange with phosphate anions from the solution. Preparation of microspheres with Eudragit S 100 leads to solids with an homogeneous, smooth surface with efficient covering of the LDH surface, as drug release was not observed at pH lower than 7. - Graphical abstract: LDHs containing Mg, Al, Fe increase fenbufen solubility, release takes place through ionic exchange with phosphate anions from the medium. Spherical solids with homogeneous, smooth surface are formed when using Eudragit S 100, efficiently covering the LDH surface. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal syntheses and structures of the uranyl tellurates AgUO{sub 2}(HTeO{sub 5}) and Pb{sub 2}UO{sub 2}(TeO{sub 6})

Two uranyl tellurates, AgUO{sub 2}(HTeO{sub 5}) (1) and Pb{sub 2}UO{sub 2}(TeO{sub 6}) (2), were synthesized under hydrothermal conditions and were structurally, chemically, and spectroscopically characterized. 1 crystallizes in space group Pbca, a=7.085(2) A, b=11.986(3) A, c=13.913(4) A, V=1181.5(5) A{sup 3}, Z=8; 2 is in P2(1)/c, a=5.742(1) A, b=7.789(2) A, c=7.928(2) A, V=90.703(2) A{sup 3}, and Z=2. These are the first structures reported for uranyl compounds containing tellurate. The U{sup 6+} cations are present as (UO{sub 2}){sup 2+} uranyl ions that are coordinated by O atoms to give pentagonal and square bipyramids in compounds 1 and 2, respectively. The structural unit in 1 is a sheet consisting of chains of edge-sharing uranyl pentagonal bipyramids that are one bipyramid wide, linked through the dimers of TeO{sub 6} octahedra. In 2, uranyl square bipyramids share each of their equatorial vertices with different TeO{sub 6} octahedra, giving a sheet with the autunite-type topology. Sheets in 1 and 2 are connected through the low-valence cations that are located in the interlayer region. The structures of 1 and 2 are compared to those of uranyl compounds containing octahedrally coordinated cations. -- Graphical abstract: Two hydrothermally synthesized uranyl tellurates, AgUO{sub 2}(HTeO{sub 5}) and Pb{sub 2}UO{sub 2}(TeO{sub 6}), contain sheets built from uranyl pentagonal or square bipyramids, as well as tellurate octahedra. Display Omitted Research highlights: > Compounds AgUO{sub 2}(HTeO{sub 5}) and Pb{sub 2}UO{sub 2}(TeO{sub 6}) are the first uranyl tellurate compounds. > The structure of AgUO{sub 2}(HTeO{sub 5}) consists of sheets of uranyl pentagonal bipyramids and TeO{sub 6} octahedra. > The structure of Pb{sub 2}UO{sub 2}(TeO{sub 6}) contains sheets of TeO{sub 6} octahedra and uranyl square bipyramids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel alkylimidazolium/vanadium pentoxide intercalation compounds with excellent adsorption performance for methylene blue

Novel alkylimidazolium-intercalated V{sub 2}O{sub 5} compounds were synthesized by a redox reaction between iodide ion and V{sub 2}O{sub 5}. The X-ray photoelectron spectroscopy and the diffuse reflectance UV-vis spectrometry experiments reveal that the vanadium in the intercalated V{sub 2}O{sub 5} products was partially reduced by an iodide ion and the resultant iodine can be removed in the final products. The transmission electron microscope observation and X-ray diffraction analysis testify that the prepared alkylimidazolium/V{sub 2}O{sub 5} intercalation compounds have typical lamellar structure with different d{sub 100} interlayer spacing values and the special straw-like nanofiber morphology with the length of 0.5-10 {mu}m. Systematic investigation indicates that new intercalation compounds possess the extraordinary adsorption performance for methylene blue in an aqueous solution. -- Graphical abstract: The alkylimidazolium-intercalated V{sub 2}O{sub 5} compounds with special straw-like nanofiber morphology were synthesized by a redox reaction between iodide ion and V{sub 2}O{sub 5}, which show the excellent adsorption performance for methylene blue in an aqueous medium. Display Omitted Research highlights: {yields} Novel alkylimidazolium-intercalated V{sub 2}O{sub 5} compounds. {yields} A simple preparation method by a redox reaction between iodide ion in ionic liquid and V{sub 2}O{sub 5}. {yields} The excellent adsorption performance for methylene blue in an aqueous medium.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electronic structure of lanthanum copper oxychalcogenides LaCuOCh (Ch=S, Se, Te) by X-ray photoelectron and absorption spectroscopy

X-ray photoelectron spectroscopy (XPS) and X-ray absorption near-edge spectroscopy (XANES) have been applied to examine the electronic structures of lanthanum copper oxychalcogenides LaCuOCh (Ch=S, Se, Te), whose structure has been conventionally viewed as consisting of nominally isolated [LaO] and [CuCh] layers. However, there is evidence for weak La-Ch interactions between these layers, as seen in small changes in the satellite intensity of the La 3d XPS spectra as the chalcogen is changed and as supported by band structure calculations. The O 1s and Cu 2p XPS spectra are insensitive to chalcogen substitution. Lineshapes in the Cu 2p XPS spectra and fine-structure in the Cu L- and M-edge XANES spectra support the presence of Cu{sup +} species. The Ch XPS spectra show negative BE shifts relative to the elemental chalcogen, indicative of anionic species; these shifts correlate well with greater difference in electronegativity between the Cu and Ch atoms, provided that an intermediate electronegativity is chosen for Se. - Graphical abstract: The presence of anionic chalcogen atoms in LaCuOCh is supported by the Ch binding energies, which undergo negative shifts proportional to the polarity of the Cu-Ch bonds. Highlights: > La 3d XPS confirms La-Ch interlayer interactions between [LaO] and [CuCh] layers. > O 1s and Cu 2p XPS are insensitive to chalcogen substitution. > Cu XANES spectra support the presence of Cu{sup +} species. > Negative shifts in Ch binding energies imply anionic chalcogen atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methotrexate intercalated ZnAl-layered double hydroxide

The anticancerous drug methotrexate (MTX) has been intercalated into an ZnAl-layered double hydroxide (LDH) using an anion exchange technique to produce LDH-MTX hybrids having particle sizes in the range of 100-300 nm. X-ray diffraction studies revealed increases in the basal spacings of ZnAl-LDH-MTX hybrid on MTX intercalation. This was corroborated by the transmission electron micrographs, which showed an increase in average interlayer spacing from 8.9 A in pristine LDH to 21.3 A in LDH-MTX hybrid. Thermogravimetric analyses showed an increase in the decomposition temperature for the MTX molecule in the LDH-MTX hybrid indicating enhanced thermal stability of the drug molecule in the LDH nanovehicle. The cumulative release profile of MTX from ZnAl-LDH-MTX hybrids in phosphate buffer saline (PBS) at pH 7.4 was successfully sustained for 48 h following Rigter-Peppas model release kinetics via diffusion. - Graphical abstract: ZnAl-layered double hydroxide intercalated with methotrexate ({approx}34% loading) promises the possibility of use of ZnAl-LDH material as drug carrier and in controlled delivery. Highlights: > ZnAl-layered double hydroxide methotrexate nanohybrid has been synthesized. > XRD and TEM studies on nanohybrid revealed successful intercalation of methotrexate. > TG and CHN analyses showed {approx}34 wt% of methotrexate loading into the nanohybrid. > Possibility of use of ZnAl-LDH material as drug carrier and in delivery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

8-Hydroxypyrene-1,3,6-trisulphonate and octanesulphonate co-assembled layered double hydroxide and its controllable solid-state luminescence by hydrothermal synthesis

8-Hydroxy-pyrene-1,3,6-trisulphonate (HPTS) and octanesulphonate (OS) have been co-intercalated into the ZnAl layered double hydroxide (LDH) host by a hydrothermal co-precipitation method, with samples denoted as HPTS (x%)-OS/Zn{sub 2}Al-LDH (x stands for the molar percentage content of HPTS with respect to total amount of HPTS and OS). The structure and chemical compositions of the as-prepared compounds were characterized by X-ray diffraction (XRD) and elemental analysis. The steady-state and time-decay fluorescent studies show that HPTS (2%)-OS/Zn{sub 2}Al-LDH has the optimal luminous emission and the longest fluorescent lifetime. Moreover, these samples exhibit controllable dual fluorescence between the blue and green regions upon changing the interlayer HPTS content, external pH values, and host-guest interaction, illustrating that these organic-inorganic samples have potential application in the field of tunable solid luminescent materials. - Graphical Abstract: 8-Hydroxy-pyrene-1,3,6-trisulphonate and octanesulfonate co-intercalated ZnAl layered double hydroxide can exhibit tunable solid-state blue and green fluorescence by treating the sample at acid and neutral media under hydrothermal condition. Highlights: Black-Right-Pointing-Pointer 8-hydroxy-pyrene-1,3,6-trisulphonate (HPTS) was intercalated into ZnAl LDHs. Black-Right-Pointing-Pointer They show the controllable dual fluorescence response to the HPTS content and pH values. Black-Right-Pointing-Pointer Fluorescence of the HPTS/LDH film was insensitive to the quencher (Cu{sup 2+}) concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic measurements and neutron diffraction study of the layered hybrid compounds Mn(C{sub 8}H{sub 4}O{sub 4})(H{sub 2}O){sub 2} and Mn{sub 2}(OH){sub 2}(C{sub 8}H{sub 4}O{sub 4})

Mn(C{sub 8}H{sub 4}O{sub 4})(H{sub 2}O){sub 2} and Mn{sub 2}(OH){sub 2}(C{sub 8}H{sub 4}O{sub 4}) layered organic-inorganic compounds based on manganese(II) and terephthalate molecules (C{sub 8}H{sub 4}O{sub 4}{sup 2-}) have been studied by DC and AC magnetic measurements and powder neutron diffraction. The dihydrated compound behaves as a 3D antiferromagnet below 6.5 K. The temperature dependence of its {chi}T product is typical of a 2D Heisenberg system and allows determining the in-plane exchange constant J Almost-Equal-To -7.4 K through the carboxylate bridges. The magnetic structure confirms the in-plane nearest neighbor antiferromagnetic interactions and the 3D ordering. The hydroxide based compound also orders as a 3D antiferromagnet with a higher Neel temperature (38.5 K). Its magnetic structure is described from two antiferromagnetically coupled ferromagnetic sublattices, in relation with the two independent metallic sites. The isothermal magnetization data at 2 K are consistent with the antiferromagnetic ground-state of these compounds. However, in both cases, a slope change points to field-induced modification of the magnetic structure. - Graphical abstract: The macroscopic magnetic properties and magnetic structures of two metal-organic frameworks based on manganese (II) and terephthalate molecules are presented. Highlights: Black-Right-Pointing-Pointer Magnetic study of Mn(C{sub 8}H{sub 4}O{sub 4})(H{sub 2}O){sub 2} and Mn{sub 2}(OH){sub 2}(C{sub 8}H{sub 4}O{sub 4}). Black-Right-Pointing-Pointer Two compounds with common features (interlayer linker/distance, S=5/2 spin). Black-Right-Pointing-Pointer Magnetic measurements quantitatively analyzed to deduce exchange constants. Black-Right-Pointing-Pointer Magnetic structures determined from neutron powder diffraction experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural analysis of Li-intercalated hexagonal boron nitride

A structural investigation of Li-intercalated hexagonal boron nitride (Li-h-BNIC) was performed by synchrotron powder X-ray diffraction analysis and transmission electron microscopy. The host BN framework of Li-h-BNIC was expanded by Li-intercalation. The intralayer B-N bond length was increased by 2.48(1)% and the interlayer distance was expanded by 12.86(1)%. No superlattice structure of intercalated Li was observed. - Graphical abstract: XRD pattern fitting of the sample and schematic view of host h-BN lattice. Highlights: Black-Right-Pointing-Pointer Li-intercalated h-BN was investigated by synchrotron radiation powder XRD. Black-Right-Pointing-Pointer Lattice parameter of host h-BN lattice was increased by intercalation. Black-Right-Pointing-Pointer Increase ratio of B-N bond length was considerably larger than those of Li GICs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Zn-Al layered double hydroxide prepared at different molar ratios: Preparation, characterization, optical and dielectric properties

The co-precipitation method was used to prepare Zn-Al-NO{sub 3}-LDH at different Zn{sup 2+}/Al{sup 3+} molar ratios (2, 3, 4, 5 and 6) and pH value of 7.5. The structure, textural, composition and morphological properties were investigated using powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) and scanning electron microscope (SEM), respectively. The crystallinity of LDH samples were found to improve as molar ratio decreased which is attributed to the distortion of the hydroxide layers networks of the LDH crystal by the larger difference in ionic radii of Zn{sup 2+} and Al{sup 3+}. The optical band gap energy of LDH samples were evaluated using absorbance data from UV-Vis-NIR Diffuse reflectance spectroscopy. Band gaps were affected by the variation of the Zn{sup 2+}/Al{sup 3+} molar ratio is due to the formation of the low crystalline phases (ZnO and ZnAl{sub 2}O{sub 4}). The water molecules and anionic NO{sub 3}{sup -} in the LDH interlayer were responsible for the generation of the dielectric response. This response can be described by an anomalous low frequency dispersion using the second type of Universal Power Law. The dominance of ZnO dipoles and charge carriers (NO{sub 3}{sup -} ions) in the dielectric relaxation increases with the increasing molar ratio. - Graphical abstract: (a) Schematic diagram of Zn-Al- NO{sub 3}-LDH shows the LDH structure, (b) Kubelka-Munk transformed reflectance spectra and c. The dielectric constant versus frequency of Zn-Al- NO{sub 3}-LDH samples. Highlights: Black-Right-Pointing-Pointer Zn-Al-NO{sub 3}-LDH was prepared at different Zn{sup 2+}/Al{sup 3+} molar ratios (2, 3, 4, 5 and 6). Black-Right-Pointing-Pointer The crystallinity of LDH phase decreased with increase of Zn{sup 2+}/Al{sup 3+} molar ratio. Black-Right-Pointing-Pointer The optical band gaps of LDH samples have been measured. Black-Right-Pointing-Pointer Dielectric response of LDH can be described by anomalous low frequency dispersion.

36 MATERIALS SCIENCE↗

Syntheses and properties of a series of chromium vanadates ACrV{sub 2}O{sub 7} (A=Na, K, Rb, Cs) with layered structure

A series of layered compounds ACrV{sub 2}O{sub 7} (A=Na, K, Rb, Cs) were investigated by means of powder X-ray diffraction technique, thermal analysis and IR spectroscopy. As a new member in this family, the structure of CsCrV{sub 2}O{sub 7} is confirmed by Rietveld refinement applying powder X-ray diffraction data. Isostructural NaCrV{sub 2}O{sub 7} was obtained by ion-exchange reaction of KCrV{sub 2}O{sub 7} in NaNO{sub 3} melt under 350 Degree-Sign C and was testified to be a metastable phase. These compounds crystallize in a monoclinic structure in the space group P2/c, and consist of planar CrV{sub 2}O{sub 7}{sup -} slabs interleaved by alkali-metal cations. ACrV{sub 2}O{sub 7} (A=K, Rb, Cs) present decreasing melting points and characteristic vibration of V=O bond in IR spectra. Magnetic measurements reveal weak antiferromagnetic interactions between Cr{sup 3+} cations in the isolated chains. - Graphical Abstract: A series of layered chromium vanadates ACrV{sub 2}O{sub 7} (A=Na, K, Rb, Cs) have been synthesized by direct solid state reactions and ion-exchange routes. The interlayer alkali-metal cations were testified ion-exchangeable by some smaller monovalent cations. Highlights: Black-Right-Pointing-Pointer The entire family of ACrV{sub 2}O{sub 7} (A=Na, K, Rb, Cs) have been prepared via solid-state reactions and ion-exchange routes. Black-Right-Pointing-Pointer CsCrV{sub 2}O{sub 7} and a metastable phase of NaCrV{sub 2}O{sub 7} (ie-NaCrV{sub 2}O{sub 7}) were synthesized for the first time. Black-Right-Pointing-Pointer Structural characterization, spectra features and physical property measurements were carried out contrastively. Black-Right-Pointing-Pointer Alkali-metal cations in the layered structure were testified to be ion-exchangeable with smaller monovalent ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Barium uranyl diphosphonates

Three Ba{sup 2+}/UO{sub 2}{sup 2+} methylenediphosphonates have been prepared from mild hydrothermal treatment of uranium trioxide, methylendiphosphonic acid (C1P2) with barium hydroxide octahydrate, barium iodate monohydrate, and small aliquots of HF at 200 Degree-Sign C. These compounds, Ba[UO{sub 2}[CH{sub 2}(PO{sub 3}){sub 2}]{center_dot}1.4H{sub 2}O (Ba-1), Ba{sub 3}[(UO{sub 2}){sub 4}(CH{sub 2}(PO{sub 3}){sub 2}){sub 2}F{sub 6}]{center_dot}6H{sub 2}O (Ba-2), and Ba{sub 2}[(UO{sub 2}){sub 2}(CH{sub 2}(PO{sub 3}){sub 2})F{sub 4}]{center_dot}5.75H{sub 2}O (Ba-3) all adopt layered structures based upon linear uranyl groups and disphosphonate molecules. Ba-2 and Ba-3 are similar in that they both have UO{sub 5}F{sub 2} pentagonal bipyramids that are bridged and chelated by the diphosphonate moiety into a two-dimensional zigzag anionic sheet (Ba-2) and a one-dimensional ribbon anionic chain (Ba-3). Ba-1, has a single crystallographically unique uranium metal center where the C1P2 ligand solely bridges to form [UO{sub 2}[CH{sub 2}(PO{sub 3}){sub 2}]{sup 2-} sheets. The interlayer space of the structures is occupied by Ba{sup 2+}, which, along with the fluoride ion, mediates the structure formed and maintains overall charge balance. - Graphical abstract: Illustration of the stacking of the layers in Ba{sub 3}[(UO{sub 2}){sub 4}(CH{sub 2}(PO{sub 3}){sub 2}){sub 2})F{sub 6}]{center_dot}6H{sub 2}O viewed along the c-axis. The structure is constructed from UO{sub 7} pentagonal bipyramidal units, U(1)O{sub 7}=gray, U(2)O{sub 7}=yellow, barium=blue, phosphorus=magenta, fluorine=green, oxygen=red, carbon=black, and hydrogen=light peach. Highlights: Black-Right-Pointing-Pointer The polymerization of the UO{sub 2}{sup 2+} sites to form uranyl dimers leads to structural variations in compounds. Black-Right-Pointing-Pointer Barium cations stitch uranyl diphosphonate anionic layers together, and help mediate structure formation. Black-Right-Pointing-Pointer HF acts as both a mineralizing agent and a ligand.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetically separable {gamma}-Fe{sub 2}O{sub 3}-SiO{sub 2}-Ce-doped TiO{sub 2} core-shell nanocomposites: Fabrication and visible-light-driven photocatalytic activity

Novel visible-light-induced {gamma}-Fe{sub 2}O{sub 3}-SiO{sub 2}-Ce-doped-TiO{sub 2} core-shell nanocomposite photocatalysts capable of magnetic separation have been synthesized by a facile sol-gel and after-annealing process. The as-obtained core-shell nanocomposite is composed of a central {gamma}-Fe{sub 2}O{sub 3} core with a strong response to external fields, an interlayer of SiO{sub 2}, and an outer layer of Ce-doped TiO{sub 2} nanocrystals. UV-vis spectra analysis indicates that Ce doping in the compound results in a red-shift of the absorption edge, thus offering increased visible light absorption. We show that such a {gamma}-Fe{sub 2}O{sub 3}-SiO{sub 2}-Ce-doped-TiO{sub 2} core-shell nanocomposite with appreciated Ce doping amount exhibits much higher visible-light photocatalytic activity than bare TiO{sub 2} and undoped {gamma}-Fe{sub 2}O{sub 3}-SiO{sub 2}-TiO{sub 2} core-shell nanocomposite toward the degradation of rhodamine B (RhB). Moreover, the {gamma}-Fe{sub 2}O{sub 3}-SiO{sub 2}-Ce-doped-TiO{sub 2} core-shell nanocomposite photocatalysts could be easily separated and reused from the treated water under application of an external magnetic field. - Graphical abstract: Novel {gamma}-Fe{sub 2}O{sub 3}-SiO{sub 2}-Ce-doped-TiO{sub 2} core/shell nanocomposite photocatalysts with enhanced photocatalytic activity and fast magnetic separability were prepared. Highlights: Black-Right-Pointing-Pointer Novel {gamma}-Fe{sub 2}O{sub 3}-SiO{sub 2}-Ce-doped TiO{sub 2} core/shell composite photocatalysts were prepared. Black-Right-Pointing-Pointer The resulting core/shell composite show high visible light photocatalytic activity. Black-Right-Pointing-Pointer The nanocomposite photocatalysts can be easily recycled with excellent durability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of Mn-intercalated layered titanate by exfoliation-flocculation approach and its efficient photocatalytic activity under visible-light

A novel Mn-intercalated layered titanate as highly active photocatalyst in visible-light region has been synthesized via a convenient and efficient exfoliation-flocculation approach with divalent Mn ions and monolayer titanate nanosheets. The 0.91 nm interlayer spacing of obtained photocatalyst is in accordance with the sum of the thickness of titanate nanosheet and the diameter of Mn ions. The yellow photocatalyst shows a spectral response in visible-light region and the calculated band gap is 2.59 eV. The photocatalytic performance of this material was evaluated by degradation and mineralization of an aqueous dye methylene blue under visible-light irradiation, and an enhanced photocatalytic activity in comparison with protonated titanate as well as the P25 TiO{sub 2} and N-doped TiO{sub 2} was obtained. Additionally, the layered structure is retained, no dye ions intercalating occurs during the photocatalysis process, and a {approx}90% photocatalytic activity can be remained after reusing 3 cycles. - Graphical abstract: Mn-intercalated layered titanate as a novel and efficient visible-light harvesting photocatalyst was synthesized via a convenient and efficient exfoliation-flocculation approach in a mild condition. Highlights: Black-Right-Pointing-Pointer Mn-intercalated titanate has been prepared by exfoliation-flocculation approach. Black-Right-Pointing-Pointer The as-prepared catalyst shows spectral response in the visible-light region. Black-Right-Pointing-Pointer Heat treatment at certain temperature enables formation of Mn-doped TiO{sub 2}. Black-Right-Pointing-Pointer Dye can be degradated effectively by the catalyst under visible light irradiation.

36 MATERIALS SCIENCE↗

Preparation, crystal structure and thermal expansion of a novel layered borate, Ba{sub 2}Bi{sub 3}B{sub 25}O{sub 44}

Single crystals of a new compound, Ba{sub 2}Bi{sub 3}B{sub 25}O{sub 44}, were grown by cooling a melt of non-stoichiometric composition. The crystal structure was solved by direct methods and refined to R=0.030 (wR=0.090). The compound is trigonal, R3{sup Macron }m, a=7.851(2), c=46.20(1) A, V=2466.6(6) A{sup 3}, Z=3. The structure is based upon a borate layered anion of the type not previously observed in inorganic compounds. The layer consists of three sublayers; it is {approx}13 A thick and oriented parallel to (001). Two of the sublayers are built from triborate groups, [B{sub 3}O{sub 8}]{sup 7-}, whereas the central sublayer consists of triborate groups, [B{sub 3}O{sub 6}]{sup 3-}. The interlayer space is occupied by the Bi{sup 3+} ions in octahedral coordination. The Ba{sup 2+} cations are located in the cavities within borate layer. The single-phase polycrystalline sample of Ba{sub 2}Bi{sub 3}B{sub 25}O{sub 44} prepared by solid-state reactions from a stoichiometric mixture has been investigated by high-temperature X-ray powder diffraction in air. Anisotropic character of the thermal expansion is not typical for layered structures: {alpha}{sub a}=12, {alpha}{sub c}=6, {alpha}{sub V}=30 Multiplication-Sign 10{sup -6} Degree-Sign S{sup -1} at 25 Degree-Sign S; anisotropy increases on heating: {alpha}{sub a}=12, {alpha}{sub c}=0, {alpha}{sub V}=24 Multiplication-Sign 10{sup -6} Degree-Sign S{sup -1} at 700 Degree-Sign S. - Graphical abstract: Correlation between the pole figure of the thermal expansion coefficients and the structure of Ba{sub 2}Bi{sub 3}B{sub 25}O{sub 44} projected onto ac plane. The pole figures are presented for room temperature and 700 Degree-Sign C. Highlights: Black-Right-Pointing-Pointer A novel borate Ba{sub 2}Bi{sub 3}B{sub 25}O{sub 44} has been synthesized by cooling a non-stoichiometric melt. Black-Right-Pointing-Pointer The crystal structure is based upon a novel borate layered anion ({approx}13 A thick). Black-Right-Pointing-Pointer Anisotropy of thermal expansion increases on heating. Black-Right-Pointing-Pointer Anisotropy dictated by the orientation of triborate groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sensitized red luminescence from Mn{sup 2+}-doped Olgite-type phosphates

Bright red luminescence is observed from Mn{sup 2+}-doped olgite-type Na{sub 2}BaMgP{sub 2}O{sub 8} with the aid of Eu{sup 2+} or Ce{sup 3+} sensitizer. Under ultraviolet (UV) light, Na{sub 2}BaMgP{sub 2}O{sub 8}: Eu{sup 2+} and Na{sub 2}BaMgP{sub 2}O{sub 8}: Ce{sup 3+} exhibit intense near-UV emissions derived from 5d-4f electron transition. Since their emission bands have substantial spectral overlap with the excitation bands of Mn{sup 2+} in Na{sub 2}BaMgP{sub 2}O{sub 8}, Mn{sup 2+} emission is successfully sensitized by resonance energy transfer. Detailed spectral consideration has revealed that Eu{sup 2+} and Ce{sup 3+} occupying interlayer A-site mainly contribute to the enhancement of the Mn{sup 2+} emission. - Graphical abstract: Olgite-type red emitting phosphors, Na{sub 2}BaMgP{sub 2}O{sub 8}: Eu{sup 2+}, Mn{sup 2+} and Na{sub 2}BaMgP{sub 2}O{sub 8}: Ce{sup 3+}, Mn{sup 2+}, were prepared by solid state reaction. Under UV excitation, Mn{sup 2+}-derived red emission was observed from them only when Eu{sup 2+} or Ce{sup 3+} ions were codoped as sensitizers, indicating that the red emission was enhanced by resonant energy transfer from the sensitizer to Mn{sup 2+}. Highlights: Black-Right-Pointing-Pointer Olgite-type phosphate red phosphors were prepared by solid state reaction. Black-Right-Pointing-Pointer Emission properties of Ce{sup 3+} doped in Na{sub 2}BaMgP{sub 2}O{sub 8} were investigated. Black-Right-Pointing-Pointer Emission properties of Mn{sup 2+} doped in Na{sub 2}BaMgP{sub 2}O{sub 8} were investigated. Black-Right-Pointing-Pointer Crystallographic site occupied by Ce{sup 3+} and Mn{sup 2+} ions were spectroscopically identified. Black-Right-Pointing-Pointer Energy transfer between Eu{sup 2+} or Ce{sup 3+} and Mn{sup 2+} was investigated for Na{sub 2}BaMgP{sub 2}O{sub 8}-based phosphors.

36 MATERIALS SCIENCE↗

Synthesis, crystal structures and optical properties of two congruent-melting isotypic diphosphates: LiM{sub 3}P{sub 2}O{sub 7} (M=Na, K)

Two new isotypic diphosphates, LiNa{sub 3}P{sub 2}O{sub 7} (1) and LiK{sub 3}P{sub 2}O{sub 7} (2), have been synthesized by conventional solid-state reaction. The single-crystal X-ray structural analyses have shown that they crystallize in the orthorhombic space group C222{sub 1} (No. 20) with the unit cells: a=5.4966(2) A, b=9.1365(4) A, c=12.2764(5) A for compound 1 and a=6.0373(14) A, b=9.339(2) A, c=13.292(3) A for compound 2. The LiM{sub 3}P{sub 2}O{sub 7} (M=Na, K) consist of two-dimensional [LiP{sub 2}O{sub 7}]{sup 3-} layers, which are composed by LiO{sub 4} tetrahedral and diphosphate groups, the Na or K atoms are filled in the interlayers and balance the charge. Second harmonic generation (SHG) on powder samples have been measured using Kurtz and Perry techniques. Thermal analyses, IR spectroscopy, UV-vis-NIR diffuse reflectance spectra, and band structure calculations are performed on the reported compounds. - Graphical Abstract: LiM{sub 3}P{sub 2}O{sub 7} (M=Na, K) consists of a two-dimensional infinite [LiP{sub 2}O{sub 7}]{sup 3-} layer, which is composed by LiO{sub 4} tetrahedra and diphosphate groups. Highlights: Black-Right-Pointing-Pointer LiNa{sub 3}P{sub 2}O{sub 7} and LiK{sub 3}P{sub 2}O{sub 7} are new compounds in the Li{sub 2}O-M{sub 2}O (M=Na, K)-P{sub 2}O{sub 5} systems. Black-Right-Pointing-Pointer Crystal structures of LiNa{sub 3}P{sub 2}O{sub 7} and LiK{sub 3}P{sub 2}O{sub 7} consist of two-dimensional [LiP{sub 2}O{sub 7}]{sup 3-} layers. Black-Right-Pointing-Pointer LiNa{sub 3}P{sub 2}O{sub 7} and LiK{sub 3}P{sub 2}O{sub 7} are congruent melting compounds.

36 MATERIALS SCIENCE↗

Controlling structure distortions in 3-layer ferroelectric Aurivillius oxides

Combined Rietveld refinements of x-ray and neutron powder diffraction data were used to understand the subtle structure distortions in 3-layer Aurivillius oxides that yield off-centering displacements in ferroelectric and multiferroic compositions. Ferroelectric phases including Bi{sub 2}A{sub 2}Ti{sub 3}O{sub 12} (A=La, Pr, Nd, La/Pr, La/Nd, Pr/Nd), Bi{sub 2}A{sub 2}TiNb{sub 2}O{sub 12} (A=Ca/Sr, Sr, and Sr/Ba) and Bi{sub 2}A{sub 2}TiTa{sub 2}O{sub 12} (A=Ca/Sr, and Sr/Ba) were studied to separate the effects of cation size and charge on the structure distortions and properties. A new approach to describing the local coordination around the Ti, Nb, and/or Ta ions is presented, where the oxygen octahedra are characterized as containing kinks in three dimensions. The kink angles follow trends with the A-site ionic radius and the ferroelectric polarization. The driving force for extensive cation site mixing between the Bi and A-site cations has been clearly established, with site mixing required to maintain interlayer bonding. - Graphical abstract: Distortion of the oxygen octahedra from planar geometries can be controlled via choice of the perovskite A-site cation, and the kink angle correlates with cation off-centering and ferroelectric polarization. Highlights: Black-Right-Pointing-Pointer A-site cations define the tilt and distortion of the octahedral. Black-Right-Pointing-Pointer Distortions of oxygen octahedra, ignoring the central cation, link to ferroelectric polarization. Black-Right-Pointing-Pointer Bi ion occupancy in the perovskite causes distortion of the oxygen sublattice. Black-Right-Pointing-Pointer We predict multiferroic behavior from off-centering caused by the Bi ion lone pair.

36 MATERIALS SCIENCE↗