Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Fast extraction of nickel from aqueous media by using ionic metal-organic frameworks

As global demand for stainless steel rapidly increases, supply for minerals such as nickel, manganese, and chromium become more critical. To shift mineral peak production and delay scarcity of alloying minerals, recycling rate of the mineral needs to increase. Development of simple and cost-effective techniques for critical mineral production and recovery from industrial wastewater will lead to enhance the current recycling rate of the mineral and reduce potential hazards of industrial wastewater bearing high concentrations of minerals. Here, in this study, ionic metal-organic framework (iMOF)-based sorbents are successfully designed for critical metal ion extraction from aqueous solution. The iMOFs are highly stable in aqueous solution over wide pH ranges, indicating that they are suitable for use in industrial wastewater with harsh chemical environments. The sorption capacity of iMOFs towards Ni reaches 34.1 mg/g with a removal efficiency of >99.9%. Notably, complete extraction of Ni takes place within 5 min, which is much faster compared to other sorbents. Moreover, the iMOFs can simultaneously coextract multiple minerals, proving their effectiveness as general sorbents for critical mineral recovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coherent structure in solar wind C{sup 6+}/C{sup 4+} ionic composition data during the quiet-sun conditions of 2008

This analysis offers evidence of characteristic scale sizes in solar wind charge state data measured in situ for 13 quiet-Sun Carrington rotations in 2008. Using a previously established novel methodology, we analyze the wavelet power spectrum of the charge state ratio C{sup 6+}/C{sup 4+} measured in situ by ACE/SWICS for 2 hr and 12 minute cadence. We construct a statistical significance level in the wavelet power spectrum to quantify the interference effects arising from filling missing data in the time series, allowing extraction of significant power from the measured data to a resolution of 24 minutes. We analyze each wavelet power spectrum for transient coherency and global periodicities resulting from the superposition of repeating coherent structures. From the significant wavelet power spectra, we find evidence for a general upper limit on individual transient coherency of ∼10 days. We find evidence for a set of global periodicities between 4-5 hr and 35-45 days. We find evidence for the distribution of individual transient coherency scales consisting of two distinct populations. Below the ∼2 day timescale, the distribution is reasonably approximated by an inverse power law, whereas for scales ≳2 days, the distribution levels off, showing discrete peaks at common coherency scales. In addition, by organizing the transient coherency scale distributions by wind type, we find that these larger, common coherency scales are more prevalent and well defined in coronal hole wind. Finally, we discuss the implications of our results for current theories of solar wind generation and describe future work for determining the relationship between the coherent structures in our ionic composition data and the structure of the coronal magnetic field.

79 ASTRONOMY AND ASTROPHYSICS↗

Disentangling cation effects on ion mobility and structure in ionic liquid electrolytes

Ionic liquids (ILs) are low-temperature molten salts, where ion transport is primarily governed by ion–ion interactions. Yet, the impact of organic IL cations on critical electrolyte properties such as ion dissociation and overall transport behavior in lithium-salt-doped ILs remains poorly understood. Moreover, despite their critical role in designing IL-based electrolytes for energy storage applications, ion–ion interactions and ion-specific transport under an applied electrical potential are seldom quantified, largely due to the unique experimental and computational challenges involved. Herein, we compare transport properties obtained using 1 H, 7 Li, and 19 F pulsed-field gradient nuclear magnetic resonance (NMR) and electrophoretic NMR (eNMR) with those measured by electrochemical impedance spectroscopy. Non-equilibrium molecular dynamics (MD) simulations and eNMR confirm the presence of negatively charged [Li(TFSI) n ] (1−n) aggregates that migrate towards the positive electrode, resulting in negative lithium transference numbers. Equilibrium MD simulations reveal a vehicular Li ion transport mechanism facilitated by long-lived aggregates with Li + cations strongly bound to multiple TFSI − anions. Finally, we observe an inverse relationship between the apparent charge of the TFSI − anion in the neat IL, which is dictated by the IL cation, and Li + transport in the salt-doped systems. This highlights the opportunity to tune electrolyte performance by tailoring cation chemistry.

Li-ion batteries↗

Origin of Intrinsically Low Thermal Conductivity in a Garnet-Type Solid Electrolyte: Linking Lattice and Ionic Dynamics with Thermal Transport

Understanding thermal transport in solid electrolytes is essential for improving the performance, reliability, and safety of all-solid-state batteries. Garnet-type lithium-ion conductors are promising candidates for solid electrolytes, yet their thermal-transport mechanisms remain poorly understood. Here, we connect the lattice and ion dynamics of single-crystal garnet-type Li 6.5 La 3 Zr 1.5 Ta 0.5 O 12 to its intrinsically low thermal conductivity. Our study reveals that the single crystals grown by the floating-zone method exhibit remarkably low glasslike thermal conductivity. Using first-principles calculations and inelastic-neutron-scattering measurements, we identify both the acoustic and numerous optical phonon modes, which stem from the complex crystal structure of the material. Notably, a low-energy optical branch exhibits an avoided crossing with acoustic phonons near 7 meV. These optical modes can enhance the scattering of heat-carrying acoustic phonons and reduce thermal conductivity. Furthermore, the calculated Grüneisen parameters are large, especially for the vibrational modes around 6 meV, indicating strong anharmonicity, with a noticeable contribution from lithium-ion vibrations. A two-channel thermal-transport model is employed to describe the weak temperature dependence of the thermal conductivity, which can be attributed to the substantial contribution of diffuson transport facilitated by the abundance of optical phonons and intrinsic anharmonicity. These results offer valuable insights into the thermal transport in a broad class of ionic conductors of interest for energy conversion and storage applications.

Ab initio calculations↗

Raman Wavelength Conversion in Ionic Liquids

Here, we explore the use of room-temperature ionic liquids (ILs) as Raman wavelength converters. ILs provide an engineerable framework to design suitable liquids for wavelength conversion over a broad spectral range, through careful selection of the molecular structures of the IL anions and cations so that specific characteristics can be obtained, such as a desirable Raman shift, low Brillouin scattering, and good optical transmission in the pump and Stokes wavelengths. Applying such criteria, we demonstrate that 1-ethyl-3-methylimidazolium dicyanamide (EMIM DCA) is an effective medium for conversion of 532-nm pulses from a Q-switched Nd :YAG laser to 603 nm. This corresponds to an approximate 2200 cm –1 shift, which can be used to generate mid-infrared radiation through subsequent difference frequency generation for optical pumping of CO 2 lasers. Threefold-higher Raman conversion efficiency is obtained in EMIM DCA compared with water under identical conditions in a proof-of-principle single-pass conversion setup, resulting in an efficient generation of multimillijoule, <6 ns duration, high-quality orange laser pulses in a wavelength region that is difficult to access at high energies. Consequently, we examine ILs representing two other classes of Raman-active functional groups and obtain conversion up to the fifth-order Stokes shift and first anti-Stokes shift. Through the tunable selection of their components and their useful dynamical properties, ILs provide a platform for efficient, simple, and alignment-tolerant high-energy Raman shifting with numerous industrial and technological applications.

74 ATOMIC AND MOLECULAR PHYSICS↗

Phonon Hall Viscosity of Ionic Crystals

When time-reversal symmetry is broken, the low-energy description of acoustic lattice dynamics allows for a dissipationless component of the viscosity tensor, the phonon Hall viscosity, which captures how phonon chirality grows with the wave vector. In this work, we show that, in ionic crystals, a phonon Hall viscosity contribution is produced by the Lorentz forces on moving ions. We calculate typical values of the Lorentz force contribution to the Hall viscosity using a simple square lattice toy model, and we compare it with literature estimates of the strengths of other Hall-viscosity mechanisms.

36 MATERIALS SCIENCE↗

Effect of Oil Viscosity and Impact of Ionic Liquid Additive on Electrically Induced Pitting in Rolling Contact

Electrically induced bearing damage (EIBD) is a growing concern in electric drivetrains, where electrical discharge currents generate localized pitting that accelerates wear and premature failure. While ionic liquids (ILs) have shown promise as lubricant additives due to their natural physical adsorption, strong capabilities of tribofilm formation, and high molecular tunability, their role in mitigating EIBD is little known. This gap is especially evident because lubricant viscosity and film thickness affect discharge behavior, and additive performance in these regimes has not been well explored. In this study, tribological tests were performed using a ball-on-disk pure rolling-contact system under an applied voltage on polyalphaolefin oils of three viscosities (4, 10, and 150 cSt measured at 100 °C), with and without the addition of a phosphonium-phosphate IL. Surface damage was analyzed using scanning electron microscopy (SEM) and stylus profilometry. Damage quantification was based on pit morphology analysis of SEM images. The results provide new insights into how oil viscosity governs the discharge behavior and how an IL additive could influence the pit formation. While viscosity seems to play a significant role, an IL additive shows potential to reduce EIBD and deserves further study.

electrically induced bearing damage (EIBD)↗

Synthesis, Structure, IR-Spectroscopic Characterization, and Ionic Conductivity of Mg{sub 0.5}Zr{sub 2}(AsO{sub 4}){sub x}(PO{sub 4}){sub 3−x}

Mg{sub 0.5}Zr{sub 2}(AsO{sub 4}){sub x}(PO{sub 4}){sub 3−x} arsenate phosphates have been prepared by a sol–gel process and characterized by X-ray diffraction, IR spectroscopy, and impedance spectroscopy. The results indicate the formation of a continuous series of solid solutions with the Sc{sub 2}(WO{sub 4}){sub 3} structure (sp. gr. P2{sub 1/n}) in the composition range 0 < x < 3. The unit-cell parameters of the solid solutions increase linearly with composition, as a consequence of arsenic substitution for phosphorus, which has a smaller ionic radius. The number of observed stretching and bending bands of the AsO{sub 4}{sup 3-} and PO{sub 4}{sup 3-} ions in the IR spectra of the solid solutions agrees with that predicted by factor group analysis for space group P2{sub 1/n}. The observed gradual shift of the absorption bands of the AsO{sub 4} tetrahedra to lower frequencies with increasing arsenic content on the tetrahedral site supports the X-ray diffraction evidence of the formation of substitutional solid solutions. The cation conductivity of Mg{sub 0.5}Zr{sub 2}(AsO{sub 4}){sub x}(PO{sub 4}){sub 3−x} with 0 ≤ х ≤ 1 has been shown to exceed the conductivity of the parent magnesium zirconium arsenate.

36 MATERIALS SCIENCE↗

Nanostructured crystals of fluorite phases Sr{sub 1-x}R{sub x}F{sub 2+x} (R are rare earth elements) and their ordering: 5. A study of the ionic conductivity of as-grown Sr{sub 1-x}R{sub x}F{sub 2+x} crystals

The ionic conductivity {sigma} of Sr{sub 1-x}R{sub x}F{sub 2+x} crystals (R = Y, La-Lu) has been measured in the temperature range of 324-933 K. The isomorphic introduction of R{sup 3+} ions into SrF{sub 2} is accompanied by an increase in conductivity up to four orders of magnitude, which makes these crystals superionic conductors. It is shown that the conduction mechanism in Sr{sub 1-x}R{sub x}F{sub 2+x} crystals changes when passing from R = La-Nd to R = Sm-Lu. A change in the type of cluster of structural defects between Nd and Sm is suggested. The concentration dependences of {sigma} and the activation energy of charge-carrier migration (E{sub a}) for Sr{sub 1-x}R{sub x}F{sub 2+x} are nonlinear. For crystals with R = La or Nd, these dependences are interpreted within the percolation model of 'defect regions,' the minimum size of which is estimated to be {approx}700 A{sup 3}. It is shown that the electrical properties of the crystals can be controlled by varying the RF{sub 3} type and concentration. The Sr{sub 1-x}R{sub x}F{sub 2+x} crystals (R = La-Nd, 0.3 {<=} x {<=} 0.5), for which {sigma} = (2-3) x 10{sup -2} S/cm at 673 K and E{sub a} = 0.6-0.7 eV, have the best electrolytic characteristics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ionic conductivity of sodium–strontium germanate Na{sub 4}SrGe{sub 6}O{sub 15}

The electrical conductivity of sodium–strontium germanate Na{sub 4}SrGe{sub 6}O{sub 15} (sp. gr. P6{sub 3}/m) has been studied by impedance spectroscopy in the frequency range of 10{sup 2}–4 × 10{sup 4} Hz and a temperature range of 450–600 K. Na4SrGe6O15 crystals were obtained by hydrothermal technique in the Na{sub 2}O–SrO–GeO{sub 2}–H{sub 2}O system (temperature t = 300–600°C and pressure p = 1.4 × 10{sup 8} Pа in the dissolution zone). The ionic conductivity of ceramic Na{sub 4}SrGe{sub 6}O{sub 15} samples is σ = 2.2 × 10{sup –6} S/cm (at 573 K), the activation energy of Na{sup +} ion transfer is E{sub a} = 0.70 ± 0.03 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural Conditionality of the Ionic Conductivity of MTiORO{sub 4} (M = K, Rb; R = P, As) Single Crystals

The ionic conductivity σ{sub ||c} along the crystallographic axis c and the structural imperfection of the lattices of KTiOPO{sub 4}, RbTiOPO{sub 4}, and RbTiOAsO{sub 4} single crystals with low defect concentration, grown by the high temperature solution growth technique, have been investigated by impedance spectroscopy and X-ray diffraction analysis. Isomorphic substitutions of Rb{sup +} ions for conduction K{sup +} cations in MTiOPO{sub 4} crystals decreases the σ{sub ||c} value, whereas the substitution of As{sup 5+} ions for framework P{sup 5+} cations in RbTiORO{sub 4} crystals increases the σ{sub ||c} value. The σ{sub ||c} values at 573 K are found to be 1.0 × 10{sup –5}, 5.7 × 10{sup –6}, 2.0 × 10{sup –6}, and 3.3 × 10{sup –5} S/cm for the KTiOPO{sub 4}, RbTiOPO{sub 4} {100}, RbTiOPO{sub 4} {201}, and RbTiOAsO{sub 4} crystals, respectively (the growth zone of the crystalline boule from which the samples were cut is indicated in braces).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ionic conductivity and dielectric relaxation in {gamma}-irradiated TlGaTe{sub 2} crystals

The switching effect, field and temperature dependences of the permittivity and conductivity of TlGaTe{sub 2} crystals subjected to various {gamma}-irradiation doses are studied. Under rather low electric fields, the phenomenon of threshold switching with an S-shaped current-voltage characteristic containing a portion with negative differential resistance is observed in the crystals. In the region of critical voltages, current and voltage oscillations and imposed modulation are observed. Possible mechanisms of switching, ionic conductivity, disorder, and electrical instability in TlGaTe{sub 2} crystals are discussed.

36 MATERIALS SCIENCE↗

High Temperature Monolithic Biochar Supercapacitor Using Ionic Liquid Electrolyte

A supercapacitor comprising of two binder-free biochar monolith electrodes and 1-butyl-3-methylimidazolium tetrafluoroborate based ionic liquid electrolyte was studied at room temperature and 140°C by cyclic voltammetry, constant-current charge-discharge, and electrochemical impedance spectroscopy. The supercapacitor exhibits an operating voltage window of approximately 6 V. It is found that increasing temperature from room temperature to 140°C considerably increases its specific mass capacity and its charge-discharge rate by a factor of approximately 10. The specific capacity of the supercapacitor calculated from the voltammetric measurements depended on scan rates. At 140°C, a capacity of 21 F g -1 was obtained at 5 mV s -1 and this value decreases to around 10 F g -1 at 100 mV s -1 ; the constant-current charge-discharge profiles exhibit pseudo-linear voltage-time responses during the discharges. The supercapacitor shows good stability characteristics of no obvious performance decay after 1000 cycles within a voltage window of 6 V. Electrochemical impedance spectra of the supercapacitor display a wide linear region corresponding to diffusion control. The energy densities of the supercapacitor that are normalized to the total active electrode materials are higher than 20 Wh kg -1 when its power density is lower than 2000 W kg -1 . In conclusion, these facts suggest that the high-temperature biochar supercapacitor would be a promising energy-storage device with high energy and power density.

25 ENERGY STORAGE↗

Communication—Light-Induced Plating of Aluminum on Silicon in a Lewis Acidic Chloroaluminate Ionic Liquid

Conventional electroplating of aluminum on silicon often requires a seed layer to overcome the high resistivity of the substrate. In this paper, light-induced plating of aluminum directly on a silicon substrate in an ionic liquid is reported. Without any seed layer, the deposited aluminum has good adhesion to the silicon surface. The resistivity of the aluminum deposits is as low as 4 × 10 -6 Ω-cm, which is only about 1.5 times that of bulk aluminum. The suitable wavelength for the light source is 600 nm to 1,000 nm. The effect of plating temperature on morphology of the aluminum deposits is analyzed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of Uniform Nanoparticulate Gold through Potential-Modulated Electrochemical Deposition and Dissolution of Silver in Ionic Liquids

Nanoparticulate gold (NPG) has been successfully produced from polycrystalline Au by a novel method based on potential-modulated electrochemical deposition and dissolution of silver in an ionic liquid bath comprising of 1-ethyl-3-methylimidazolium chloride and silver nitrate at elevated temperatures. Cyclic voltammetric measurements exhibit that the potential cycles between -1.0 and 0.75 V versus a silver pseudo reference electrode can drive the electrochemical deposition and dissolution of silver onto and away from the Au electrode. Scanning electron microscope studies show that the NPG resulting from the potential cycles has very narrow particle size distribution with an average diameter of approximately 50 nm and is free of elemental Ag residue. As compared to a bulk Au electrode, the NPG electrode demonstrates substantially enhanced electrochemical responses. It exhibits a seven-time higher electro-catalytic activity towards the electrooxidation of nitrite in acidic media.

36 MATERIALS SCIENCE↗

Electrolyte Solvation and Ionic Association. VI. Acetonitrile-Lithium Salt Mixtures. Highly Associated Salts Revisited

Molecular dynamics (MD) simulations of acetonitrile (AN) mixtures with LiBF 4 , LiCF 3 SO 3 and LiCF 3 CO 2 provide extensive details about the molecular- and mesoscale-level solution interactions and thus explanations as to why these electrolytes have very different thermal phase behavior and electrochemical/physicochemical properties. The simulation results are in full accord with a previous experimental study of these (AN)n-LiX electrolytes. This computational study reveals how the structure of the anions strongly influences the ionic association tendency of the ions, the manner in which the aggregate solvates assemble in solution and the length of time in which the anions remain coordinated to the Li + cations in the solvates which result in dramatic variations in the transport properties of the electrolytes.

25 ENERGY STORAGE↗

A comparative study of ethanol production using dilute acid, ionic liquid and AFEX™ pretreated corn stover

In a biorefinery producing cellulosic biofuels, biomass pretreatment will significantly influence the efficacy of enzymatic hydrolysis and microbial fermentation. Comparison of different biomass pretreatment techniques by studying the impact of pretreatment on downstream operations at industrially relevant conditions and performing comprehensive mass balances will help focus attention on necessary process improvements, and thereby help reduce the cost of biofuel production. An on-going collaboration between the three US Department of Energy (DOE) funded bioenergy research centers (Great Lakes Bioenergy Research Center (GLBRC), Joint BioEnergy Institute (JBEI) and BioEnergy Science Center (BESC)) has given us a unique opportunity to compare the performance of three pretreatment processes, notably dilute acid (DA), ionic liquid (IL) and ammonia fiber expansion (AFEX TM ), using the same source of corn stover. Separate hydrolysis and fermentation (SHF) was carried out using various combinations of commercially available enzymes and engineered yeast (Saccharomyces cerevisiae 424A) strain. The optimal commercial enzyme combination (Ctec2: Htec2: Multifect Pectinase, percentage total protein loading basis) was evaluated for each pretreatment with a microplate-based assay using milled pretreated solids at 0.2% glucan loading and 15 mg total protein loading/g of glucan. The best enzyme combinations were 67:33:0 for DA, 39:33:28 for IL and 67:17:17 for AFEX. The amounts of sugar (kg) (glucose: xylose: total gluco- and xylo-oligomers) per 100 kg of untreated corn stover produced after 72 hours of 6% glucan loading enzymatic hydrolysis were: DA (25:2:2), IL (31:15:2) and AFEX (26:13:7). Additionally, the amounts of ethanol (kg) produced per 100 kg of untreated corn stover and the respective ethanol metabolic yield (%) achieved with exogenous nutrient supplemented fermentations were: DA (14.0, 92.0%), IL (21.2, 93.0%) and AFEX (20.5, 95.0%), respectively. The reason for lower ethanol yield for DA is because most of the xylose produced during the pretreatment was removed and not converted to ethanol during fermentation. Compositional analysis of the pretreated biomass solids showed no significant change in composition for AFEX treated corn stover, while about 85% of hemicellulose was solubilized after DA pretreatment, and about 90% of lignin was removed after IL pretreatment. As expected, the optimal commercial enzyme combination was different for the solids prepared by different pretreatment technologies. Due to loss of nutrients during the pretreatment and washing steps, DA and IL pretreated hydrolysates required exogenous nutrient supplementation to ferment glucose and xylose efficiently, while AFEX pretreated hydrolysate did not require nutrient supplementation.

09 BIOMASS FUELS↗

Understanding cost drivers and economic potential of two variants of ionic liquid pretreatment for cellulosic biofuel production

Background: Ionic liquid (IL) pretreatment could enable an economically viable route to produce biofuels by providing efficient means to extract sugars and lignin from lignocellulosic biomass. However, to realize this, novel IL-based processes need to be developed in order to minimize the overall production costs and accelerate commercial viability. In this study, two variants of IL-based processes are considered: one based on complete removal of the IL prior to hydrolysis using a water-wash (WW) step and the other based on a “one-pot” (OP) process that does not require IL removal prior to saccharification. Detailed techno-economic analysis (TEA) of these two routes was carried out to understand the cost drivers, economic potential (minimum ethanol selling price, MESP), and relative merits and challenges of each route. Results: At high biomass loading (50%), both routes exhibited comparable economic performance with an MESP of $6.3/gal. With the possible advances identified (reduced water or acid/base consumption, improved conversion in pretreatment, and lignin valorization), the MESP could be reduced to around $3/gal ($3.2 in the WW route and $2.8 in the OP route). Conclusions: It was found that, to be competitive at industrial scale, lowered cost of ILs used and higher biomass loadings (50%) are essential for both routes, and in particular for the OP route. Overall, while the economic potential of both routes appears to be comparable at higher biomass loadings, the OP route showed the benefit of lower water consumption at the plant level, an important cost and sustainability consideration for biorefineries.

09 BIOMASS FUELS↗