Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Tailoring Electrochemical CO 2 Reduction on Copper by Reactive Ionic Liquid and Native Hydrogen Bond Donors

Abstract Electrochemical CO 2 reduction (CO 2 RR) on copper (Cu) shows promise for higher‐value products beyond CO. However, challenges such as the limited CO 2 solubility, high overpotentials, and the competing hydrogen evolution reaction (HER) in aqueous electrolytes hinder the practical realization. We propose a functionalized ionic liquid (IL) which generates ion‐CO 2 adducts and a hydrogen bond donor (HBD) upon CO 2 absorption to modulate CO 2 RR on Cu in a non‐aqueous electrolyte. As revealed by transient voltammetry, electrochemical impedance spectroscopy (EIS), and in situ surface‐enhanced Raman spectroscopy (SERS) complemented with image charge augmented quantum‐mechanical/molecular mechanics (IC‐QM/MM) computations, a unique microenvironment is constructed. In this microenvironment, the catalytic activity is primarily governed by the IL and HBD concentrations; former controlling the double layer thickness and the latter modulating the local proton availability. This translates to ample CO 2 availability, reduced overpotential, and suppressed HER where C 4 products are obtained. This study deepens the understanding of electrolyte effects in CO 2 RR and the role of IL ions towards electrocatalytic microenvironment design.

Coskun, Oguz Kagan↗

Small‐Molecule Mixed Ionic‐Electronic Conductors for Efficient N‐Type Electrochemical Transistors: Structure‐Function Correlations

Abstract The fundamental challenge in electron‐transporting organic mixed ionic‐electronic conductors (OMIECs) is simultaneous optimization of electron and ion transport. Beginning from Y6‐type/U‐shaped non‐fullerene solar cell acceptors, we systematically synthesize and characterize molecular structures that address the aforementioned challenge, progressively introducing increasing numbers of oligoethyleneglycol (OEG; g) sidechains from 1 g to 3 g, affording OMIECs 1gY, 2gY, and 3gY, respectively. The crystal structure of 1gY preserves key structural features of the Y n series: a U‐shaped/planar core, close π–π molecular stacking, and interlocked acceptor groups. Versus inactive Y6 and Y11, all of the new glycolated compounds exhibit mixed ion‐electron transport in both conventional organic electrochemical transistor (cOECT) and vertical OECT (vOECT) architectures. Notably, 3gY with the highest OEG density achieves a high transconductance of 16.5 mS, an on/off current ratio of ~10 6 , and a turn‐on/off response time of 94.7/5.7 ms in vOECTs. Systematic optoelectronic, electrochemical, architectural, and crystallographic analysis explains the superior 3gY‐based OECT performance in terms of denser n gY OEG content, increased crystallite dimensions with decreased long‐range crystalline order, and enhanced film hydrophilicity which facilitates ion transport and efficient redox processes. Finally, we demonstrate an efficient small‐molecule‐based complementary inverter using 3gY vOECTs, showcasing the bioelectronic applicability of these new small‐molecule OMIECs.

Cho, Yongjoon↗

Carbon Dioxide Capture by Superbase-Derived Protic Ionic Liquids

Protic ionic liquids (PILs) from a superbase and fluorinated alcohol, imidazole, pyrrolinone, or phenol were designed to capture CO{sub 2} based on the reactivity of their anions to CO{sub 2}. These PILs are capable of rapid and reversible capture of about one equivalent of CO{sub 2}, which is superior to those sorption systems based on traditional aprotic ILs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tailoring Electrochemical CO 2 Reduction on Copper by Reactive Ionic Liquid and Native Hydrogen Bond Donors

Electrochemical CO 2 reduction (CO 2 RR) on copper (Cu) shows promise for higher-value products beyond CO. However, challenges such as the limited CO 2 solubility, high overpotentials, and the competing hydrogen evolution reaction (HER) in aqueous electrolytes hinder the practical realization. We propose a functionalized ionic liquid (IL) which generates ion-CO 2 adducts and a hydrogen bond donor (HBD) upon CO 2 absorption to modulate CO 2 RR on Cu in a non-aqueous electrolyte. As revealed by transient voltammetry, electrochemical impedance spectroscopy (EIS), and in situ surface-enhanced Raman spectroscopy (SERS) complemented with image charge augmented quantum-mechanical/molecular mechanics (IC-QM/MM) computations, a unique microenvironment is constructed. In this microenvironment, the catalytic activity is primarily governed by the IL and HBD concentrations; former controlling the double layer thickness and the latter modulating the local proton availability. This translates to ample CO 2 availability, reduced overpotential, and suppressed HER where C 4 products are obtained. This study deepens the understanding of electrolyte effects in CO 2 RR and the role of IL ions towards electrocatalytic microenvironment design.

25 ENERGY STORAGE↗

Small‐Molecule Mixed Ionic‐Electronic Conductors for Efficient N‐Type Electrochemical Transistors: Structure‐Function Correlations

Abstract The fundamental challenge in electron‐transporting organic mixed ionic‐electronic conductors (OMIECs) is simultaneous optimization of electron and ion transport. Beginning from Y6‐type/U‐shaped non‐fullerene solar cell acceptors, we systematically synthesize and characterize molecular structures that address the aforementioned challenge, progressively introducing increasing numbers of oligoethyleneglycol (OEG; g) sidechains from 1 g to 3 g, affording OMIECs 1gY, 2gY, and 3gY, respectively. The crystal structure of 1gY preserves key structural features of the Y n series: a U‐shaped/planar core, close π–π molecular stacking, and interlocked acceptor groups. Versus inactive Y6 and Y11, all of the new glycolated compounds exhibit mixed ion‐electron transport in both conventional organic electrochemical transistor (cOECT) and vertical OECT (vOECT) architectures. Notably, 3gY with the highest OEG density achieves a high transconductance of 16.5 mS, an on/off current ratio of ~10 6 , and a turn‐on/off response time of 94.7/5.7 ms in vOECTs. Systematic optoelectronic, electrochemical, architectural, and crystallographic analysis explains the superior 3gY‐based OECT performance in terms of denser n gY OEG content, increased crystallite dimensions with decreased long‐range crystalline order, and enhanced film hydrophilicity which facilitates ion transport and efficient redox processes. Finally, we demonstrate an efficient small‐molecule‐based complementary inverter using 3gY vOECTs, showcasing the bioelectronic applicability of these new small‐molecule OMIECs.

Cho, Yongjoon↗

Large Enhancements in Optical and Piezoelectric Properties in Ferroelectric Zn 1- x Mg x O Thin Films through Engineering Electronic and Ionic Anharmonicities

Multifunctionality as a paradigm requires materials exhibiting multiple superior properties. Integrating second-order optical nonlinearity and large bandgap with piezoelectricity can, for example, enable broadband, strain-tunable photonics. Though very different phenomena at distinct frequencies, both second-order optical nonlinearity and piezoelectricity are third-rank polar tensors present only in acentric crystal structures. However, simultaneously enhancing both phenomena is highly challenging since it involves competing effects with tradeoffs. Recently, a large switchable ferroelectric polarization of ≈80 μC cm –2 was reported in Zn 1-x Mg x O films. Here, ferroelectric Zn 1-x Mg x O is demonstrated to be a platform that hosts simultaneously a 30% increase in the electronic bandgap, a 50% enhancement in the second harmonic generation (SHG) coefficients, and a near 200% improvement in the piezoelectric coefficients over pure ZnO. These enhancements are shown to be due to a 400% increase in the electronic anharmonicity and a ≈200% decrease in the ionic anharmonicity with Mg substitution. Precisely controllable periodic ferroelectric domain gratings are demonstrated down to 800 nm domain width, enabling ultraviolet quasi-phase-matched optical harmonic generation as well as domain-engineered piezoelectric devices.

36 MATERIALS SCIENCE↗

Working Principle of an Ionic Liquid Interlayer During Pressureless Lithium Stripping on Li 6.25 Al 0.25 La 3 Zr 2 O 12 (LLZO) Garnet‐Type Solid Electrolyte

Abstract Solid‐state‐batteries employing lithium metal anodes promise high theoretical energy and power densities. However, morphological instability occurring at the lithium/solid–electrolyte interface when stripping and plating lithium during cell cycling needs to be mitigated. Vacancy diffusion in lithium metal is not sufficiently fast to prevent pore formation at the interface above a certain current density during stripping. Applied pressure of several MPa can prevent pore formation, but this is not conducive to practical application. This work investigates the concept of ionic liquids as “self‐adjusting” interlayers to compensate morphological changes of the lithium anode while avoiding the use of external pressure. A clear improvement of the lithium dissolution process is observed as it is possible to continuously strip more than 70 μm lithium (i. e., 15 mAh cm −2 charge) without the need for external pressure during assembly and electrochemical testing of the system. The impedance of the investigated electrodes is analyzed in detail, and contributions of the different interfaces are evaluated. The conclusions are corroborated with morphology studies using cryo‐FIB‐SEM and chemical analysis using XPS. This improves the understanding of the impedance response and lithium stripping in electrodes employing liquid interlayers, acting as a stepping‐stone for future optimization.

Fuchs, Till↗

Reversible uptake of COS, CS2 and SO2; Ionic liquids with O-alkylxanthate, O-alkylthiocarbonate, and O-alkylsulfite anions

Further development of CO2 binding organic liquids to capture and release carbonyl sulfide, carbon disulfide and sulfur dioxide. This paper investigates a brand new class of ionic liquids which have potential as chemical sensors for acid gas capture. Applications to flue gas scrubbing are discussed with an emphasis on capture and release of COS, CS2 and SO2 with amidine and guanidine bases with alcohols. Formal spectroscopic characterization is presented.

54 ENVIRONMENTAL SCIENCES↗

Ready Access to Anhydrous Anionic Lanthanide Acetates by Using Imidazolium Acetate Ionic Liquids as the Reaction Medium

Abstract Access to lanthanide acetate coordination compounds is challenged by the tendency of lanthanides to coordinate water and the plethora of acetate coordination modes. A straightforward, reproducible synthetic procedure by treating lanthanide chloride hydrates with defined ratios of the ionic liquid (IL) 1‐ethyl‐3‐methylimidazolium acetate ([C 2 mim][OAc]) has been developed. This reaction pathway leads to two isostructural crystalline anhydrous coordination complexes, the polymeric [C 2 mim] n [{Ln 2 (OAc) 7 } n ] and the dimeric [C 2 mim] 2 [Ln 2 (OAc) 8 ], based on the ion size and the ratio of IL used. A reaction with an IL : Ln‐salt ratio of 5 : 1, where Ln=Nd, Sm, and Gd, led exclusively to the polymer, whilst for the heaviest lanthanides (Dy−Lu) the dimer was observed. Reaction with Eu and Tb resulted in a mixture of both polymeric and dimeric forms. When the amount of IL and/or the size of the cation was increased, the reaction led to only the dimeric compound for all the lanthanide series. Crystallographic analyses of the resulting salts revealed three different types of metal‐acetate coordination modes where η 2 μκ 2 is the most represented in both structure types.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Funneled Depolymerization of Ionic Liquid-Based Biorefinery “Heterogeneous” Lignin into Guaiacols over Reusable Palladium Catalyst

The efficient utilization of lignin, the direct source of renewable aromatics, into value-added renewable chemicals is an important step towards sustainable biorefinery practices. Nevertheless, owing to the random heterogeneous structure and limited solubility, lignin utilization has been primarily limited to burning for energy. The catalytic depolymerization of lignin has been proposed and demonstrated as a viable route to sustainable biorefinery, however, low yields and poor selectivity of products, high char formation, and limited to no recycling of transition-metal-based catalyst involved in lignin depolymerization demands attention to enable practical-scale lignocellulosic biorefineries. In this study, we demonstrate the catalytic depolymerization of ionic liquid-based biorefinery poplar lignin into guaiacols over a reusable zirconium phosphate supported palladium catalyst. The essence of the study lies in the high conversion (>80 %), minimum char formation (7–16 %), high yields of guaiacols (up to 200 mg / g of lignin), and catalyst reusability. In conclusion, both solid residue, liquid stream, and gaseous products were thoroughly characterized using ICP-OES, PXRD, CHN analysis, GC-MS, GPC, and 2D NMR to understand the hydrogenolysis pathway.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic Framework for Water in Deep Eutectic Solvents and Ionic Liquids

Water is widely recognized as critical to the tunability and electrochemical stability of nonaqueous solvents such as deep eutectic solvents (DESs) and ionic liquids (ILs). Traditionally, the water content of these solvents has been controlled by either drying or adding small amounts of water to control their bulk properties to meet specific application requirements. The total water content by itself, does not provide sufficient information about the chemical reactivity and molecular interactions within DES– and IL–water mixtures. In this concept article, water activity is highlighted as a thermodynamically more rigorous descriptor to quantify the influence of the co‐solvent water on DES– and IL–water mixtures. Water activity relates measurable physical properties, such as vapor pressure, density, viscosity, electrochemical stability, and conductivity of DESs and ILs to the underlying molecular interactions between their components. Furthermore, water activity of DESs and ILs correlates with changes in local solvent structures and thermodynamic excess properties, including excess molar volume, enthalpy, and Gibbs energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lithium-sulfur batteries based on nitrogen-doped carbon and ionic liquid electrolyte

Nitrogen-doped mesoporous carbon (NC) and sulfur were used to prepare an NC/S composite cathode, which was evaluated in an ionic liquid electrolyte of 0.5 M lithium bis(trifluoromethane sulfonyl)imide (LiTFSI) in methylpropylpyrrolidinium bis(trifluoromethane sulfonyl)imide (MPPY.TFSI) by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and cycle testing. To facilitate the comparison, a C/S composite based on activated carbon (AC) without nitrogen doping was also fabricated under the same conditions as those for the NC/S composite. Compared with the AC/S composite, the NC/S composite showed enhanced activity toward sulfur reduction, as evidenced by the early onset sulfur reduction potential, higher redox current density in the CV test, and faster charge transfer kinetics as indicated by EIS measurement. At room temperature under a current density of 84 mA g-1 (C/20), the battery based on the NC/S composite exhibited higher discharge potential and an initial capacity of 1420 mAh g-1 whereas that based on the AC/S composite showed lower discharge potential and an initial capacity of 1120 mAh g-1. Both batteries showed similar capacity fading with cycling due to the intrinsic polysulfide solubility and the polysulfide shuttle mechanism; the capacity fading can be improved by further modification of the cathode.

Sun, Xiao-Guang↗

Methyl Ketones from Municipal Solid Waste Blends by One‐Pot Ionic‐Liquid Pretreatment, Saccharification, and Fermentation

Abstract The conversion of municipal solid waste (MSW) and lignocellulosic biomass blends to methyl ketones (MKs) was investigated by using bioderived ionic liquid (bionic liquid)‐based hydrolysates followed by fermentation with an engineered Escherichia coli strain. The hydrolysates were produced by a one‐pot process using six types of MSW–biomass blends, choline‐based bionic liquids, and commercial enzymes. Based on the sugar yields, one blend (corn stover/MSW=95:5, w / w ) and two bionic liquids {cholinium lysinate ([Ch][Lys]) and cholinium aspartate ([Ch] 2 [Asp])} were selected for scale‐up studies. Maximum yields of 82.3 % glucose and 54.4 % xylose were obtained from the selected blend in the scale‐up studies (6 L), which was comparable with 83.6 % glucose and 52.8 % xylose obtained at a smaller scale (0.2 L). Comparable or higher yields of medium‐chain (C 11 –C 17 ) MKs were achieved by using the MSW–biomass blend‐derived hydrolysates, relative to the sugar controls (glucose and xylose) with similar sugar feeding concentrations. Up to 1145 mg L −1 of MKs was produced by using MSW–biomass‐derived hydrolysates, and the MK titer decreased to 300 mg L −1 when the bionic‐liquid concentration in the hydrolysate increased from 1 to 2 %, indicative of bionic‐liquid inhibition. Technoeconomic analysis was conducted to investigate the economic potential of using the selected MSW–biomass blend as a feedstock to produce MKs.

Yan, Jipeng↗

Microwave Regeneration and Thermal and Oxidative Stability of Imidazolium Cyanopyrrolide Ionic Liquid for Direct Air Capture of Carbon Dioxide

Abstract Understanding the oxidative and thermal degradation of CO 2 sorbents is essential for assessing long‐term sorbent stability in direct air capture (DAC). The potential degradation pathway of imidazolium cyanopyrrolide, an ionic liquid (IL) functionalized for superior CO 2 capacity and selectivity, is evaluated under accelerated degradation conditions to elucidate the secondary reactions that can occur during repetitive absorption‐desorption thermal‐swing cycles. The combined analysis from various spectroscopic, chromatographic, and thermal gravimetric measurements indicated that radical and S N 2 mechanisms in degradation are encouraged by the nucleophilicity of the anion. Thickening of the liquid and gas evolution are accompanied by 50 % reduction in CO 2 capacity after a 7‐day exposure to O 2 under 80 °C. To prevent long exposure to conventional thermal heating, microwave (MW) regeneration of the CO 2 ‐reactive IL is used, where dielectric heating at 80 and 100 °C rapidly desorbs CO 2 and regenerates the IL without any measurable degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dissolution of the rare-earth mineral bastnaesite by acidic amide ionic liquid for recovery of critical

Rare-earth elements provide the cornerstones to clean sustainable energy and modern technologies such as computers, communications, and transportation. As such, the recovery of rare earths (REs) from minerals such as bastnaesite remains important for modern times. As the light lanthanides (La–Nd) constitute the majority (typically > 98.7 %) of the REs in bastnaesite with the heavy REs (Sm–Lu) contributing the remainder (approximately 1.3 %), an enrichment of heavier REs may serve as an effective means of assisting rare-earth recovery. Such an extractive metallurgy process involving ionic liquids (ILs) leads to an enrichment of heavy REs by nearly an order of magnitude. The acidic IL N,N-dimethylacetamidium bis(trifluoromethylsulfonyl)imide (DMAH+NTf 2 – ) in the IL 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMIM + NTf 2 – ) dissolves froth flotation bastnaesite, synthetic bastnaesite analogues (RECO 3 F), RE 2 O 3 , and RE 2 (CO 3 ) 3 minerals. Furthermore, an overall reaction for the dissolution of bastnaesite is proposed for this IL system. This IL system may provide the initial stages of a greater RE separation scheme for bastnaesite froth flotation concentrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemical Measurement of Gold Oxide Reduction and Methods for Acid Neutralization and Minimization of Water in Wet Ionic Liquid

The formation and reduction of gold oxide in wet ionic liquid (IL), N-trimethyl-N-butylammonium bis(trifluoromethanesulfonyl)imide, ([Me 3 N n Bu][TFSI]) is examined. The water concentration is determined using both the charge and peak current from the reduction of gold oxide and compared directly with Karl Fischer data. The quantitative determination of water in the IL is demonstrated for concentrations between 0.09 and 0.74 by weight (w%). The treatment of wet IL with dry nitrogen or molecular sieves reduces the water below background levels. Finally, methods for acid neutralization and the reduction of water with molecular sieves are conducted to minimize their impact on subsequent electrochemical measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High‐throughput screening of aqueous biphasic systems with ionic liquids as additives for extraction and purification of enveloped virus‐like particles

Due to their unique properties, virus‐like particles (VLPs) have been portrayed as a promising high‐value biopharmaceutical in VLP‐based vaccination and cancer therapy. Nevertheless, due to limited physical and economical capabilities of the current downstream processing of VLPs, their production is still difficult and seen as a major problem that needs to be tackled. In this work, high‐throughput screening on a liquid handling station (LHS) has been implemented for efficient selection of adequate polymer‐salt aqueous biphasic systems (ABS) for extraction and purification of enveloped Hepatitis C virus pseudoparticles (HCVpp). The effect of polyethylene glycol (PEG) molecular weight and salt type (citrate, sulfate, and phosphate) was first evaluated. Furthermore, to optimize extraction parameters, the effect of pH and tie‐line lengths (TLL) was also addressed. For the most promising ABS and extraction conditions, the addition of ten ionic liquids (ILs) as adjuvants was investigated. Insights on the chemical features of ILs that impact HCV‐VLPs partitioning are highlighted. Finally, the potential of studied ABS containing ILs as adjuvants in the extraction and purification of VLPs from cell culture supernatants was addressed. The 100% extraction efficiency of VLPs in the PEG‐rich phase was achieved, and VLP purity was increased compared to the system without IL. In conclusion, these promising results show that ILs can be very effective in modulating the phase properties of polymer‐salt ABS, achieving high HCV‐VLP purification.

Marchel, Mateusz↗

Ionic Liquid Facilitated Solvent‐Phase Polymerization of Ultrasmooth Coatings of Polycatecholamines

Mussel-inspired polycatecholamine coatings and films have proven to be versatile materials for surface modification. However, the progress of chemically modified coatings with tailored properties has been slow due to the lack of definitive evidence of their polymeric structure. Polycatecholamines form aggregates during polymerization, and their formation mechanism has been a subject of debate owing to their insolubility in traditional molecular solvents. Exploiting the capability of ionic liquids (ILs) to exhibit strong electrostatic interactions, herein, the first solution-phase polymerization approach is reported to achieve polymerization of four catecholamines – dopamine (DA), norepinephrine (NE), L-3,4-dihydroxyphenylalanine (L-DOPA), and adrenaline (AD). Kinetic control over the polymerization process in the solution phase enabled it to follow the process with 1 H NMR spectroscopy, revealing the formation of structural features of resulting complex heterogeneous and soluble polymers. The polymers are both covalent and associative in nature. Solution phase polymerization prevented the formation of large aggregates in the solution, thus facilitating the formation of coatings that are ultra-smooth and have root mean square roughness of the order of sub-nm to nm scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗