Search NASA⌕ Search

SEARCH · Search NASA

Results for “methods: data analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Luminosity determination using Z boson production at the CMS experiment

The measurement of Z boson production is presented as a method to determine the integrated luminosity of CMS data sets. The analysis uses proton–proton collision data, recorded by the CMS experiment at the CERN LHC in 2017 at a center-of-mass energy of 13 TeV. Events with Z bosons decaying into a pair of muons are selected. The total number of Z bosons produced in a fiducial volume is determined, together with the identification efficiencies and correlations from the same data set, in small intervals of 20 pb –1 of integrated luminosity, thus facilitating the efficiency and rate measurement as a function of time and instantaneous luminosity. Using the ratio of the efficiency-corrected numbers of Z bosons, the precisely measured integrated luminosity of one data set is used to determine the luminosity of another. For the first time, a full quantitative uncertainty analysis of the use of Z bosons for the integrated luminosity measurement is performed. The uncertainty in the extrapolation between two data sets, recorded in 2017 at low and high instantaneous luminosity, is less than 0.5%. We show that the Z boson rate measurement constitutes a precise method, complementary to traditional methods, with the potential to improve the measurement of the integrated luminosity.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Non-Destructive Evaluation of the Bondline Interface between Carbon Fiber Reinforced Laminated Composites and Metal Materials via Ultrasonic Inspection Methods

Woven fiber, laminated composites allow the design engineer to create high strength parts, but the effectiveness of the final processed part is greatly diminished through weak or nonexistent bonds between the composite and the substrate to which it is bonded. Additionally, these layered laminates are commonly made by curing the resin infused carbon fiber fabrics in predefined layers and then bonding them to another composite or a metallic structure using either a pre-cure or a co-cure method. The focus of this study is the identification of the defect caused by a disbond or a delamination located at the interface between a composite laminate stack and the substrate to which it is bonded. We present a nondestructive approach using various ultrasonic methods to identify the existence of the bond between composite and composite-to-metal interface. This paper explores contact and immersion ultrasound methods using pulse-echo for evaluating the composite material and adhesive bondline and the signal attenuation undergone by the wave as it propagates through the composite. Finally, a summary of the detection and analysis techniques developed to identify disbonds, including Fast Fourier Transform analysis of the immersion data, is presented. Lastly, each of the methods evaluated in this study is able to detect the transition from bonded to unbonded sections at the bondline from either side of the bonded part, with the immersion technique providing a significantly higher resolution of the edge of the bondline.

36 MATERIALS SCIENCE↗

A View from Above: Cloud Plots to Visualize Global Metabolomic Data

Global metabolomics describes the comprehensive analysis of small molecules in a biological system without bias. With mass spectrometry-based methods, global metabolomic data sets typically comprise thousands of peaks, each of which is associated with a mass-to-charge ratio, retention time, fold change, p-value, and relative intensity. Although several visualization schemes have been used for metabolomic data, most commonly used representations exclude important data dimensions and therefore limit interpretation of global data sets. Given that metabolite identification through tandem mass spectrometry data acquisition is a time-limiting step of the untargeted metabolomic workflow, simultaneous visualization of these parameters from large sets of data could facilitate compound identification and data interpretation. Here, we present such a visualization scheme of global metabolomic data using a so-called “cloud plot” to represent multidimensional data from septic mice. While much attention has been dedicated to lipid compounds as potential biomarkers for sepsis, the cloud plot shows that alterations in hydrophilic metabolites may provide an early signature of the disease prior to the onset of clinical symptoms. The cloud plot is an effective representation of global mass spectrometry-based metabolomic data, and we describe how to extract it as standard output from our XCMS metabolomic software.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Parallel Computing Infrastructure for Building Energy Simulation

In order to study grid-interactive efficient buildings, Pacific Northwest National Laboratories (PNNL) needs an infrastructure for urban-scale building energy modeling. Such an infrastructure should be fast, scalable, and easy-to-use. Given a set of data from the Energy Information Administration’s Commercial Building Energy Consumption Survey (CBECS) and tool to translate survey data into simulation inputs, this project aimed to conduct the simulation of the entire dataset in parallel. Before running the simulations, the necessary software was bundled into a container for use on the PNNL supercomputing network. Then, the parallel simulation workflow was designed using GNU Make, a file creation software, and submitted to a supercomputing partition which could run hundreds of simulations simultaneously. The EnergyPlus simulations output hourly electric meter data for each CBECS sample, which represents the electricity consumption of similar commercial buildings across the United States. Analyzing and visualizing the meter data is important to the future of the work, and this project wrote code to make common analysis methods simple, fast, and accessible. Moving forwards, the model will need to be expanded to include data from other sources and its accuracy will need to be improved and eventually validated.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Defining a Metric Space of Host Logs and Operational Use Cases

Host logs, in particular, Windows Event Logs, are a valuable source of information often collected by security operation centers (SOCs). The semi-structured nature of host logs inhibits automated analytics, and while manual analysis is common, the sheer volume makes manual inspection of all logs impossible. Although many powerful algorithms for analyzing time-series and sequential data exist, utilization of such algorithms for most cyber security applications is either infeasible or requires tailored, research-intensive preparations. In particular, basic mathematic and algorithmic developments for providing a generalized, meaningful similarity metric on system logs is needed to bridge the gap between many existing sequential data mining methods and this currently available but under-utilized data source. In this paper, we provide a rigorous definition of a metric product space on Windows Event Logs, providing an embedding that allows for the application of established machine learning and time-series analysis methods. We then demonstrate the utility and flexibility of this embedding with multiple use-cases on real data: (1) comparing known infected to new host log streams for attack detection and forensics, (2) collapsing similar streams of logs into semantically-meaningful groups (by user, by role), thereby reducing the quantity of data but not the content, (3) clustering logs as well as short sequences of logs to identify and visualize user behaviors and background processes over time. Overall, we provide a metric space framework for general host logs and log sequences that respects semantic similarity and facilitates a wide variety of data science analytics to these logs without data-specific preparations for each.

Verma, Miki↗

Using feature importance as an exploratory data analysis tool on Earth system models

Abstract. Machine learning (ML) models are commonly used to generate predictions, but these models can also support the discovery of new science. Generating accurate predictions necessitates that a model captures the structure of the underlying data. If the structure is properly extracted, ML could be a useful exploratory and evidential tool. In this paper, we present a case study that demonstrates the use of ML for exploratory data analysis (EDA) in the climate space. We apply the ML explainability method of spatiotemporal zeroed feature importance (stZFI) to understand how climate-variable associations evolve over space and time. Our analyses focus on data from ensembles of Earth system models (ESMs) which provide data on different climate states and conditions. We elect to work with ESM ensembles since they allow us to compare feature importance across alternative scenarios not available with observed data. The ensembles also account for natural variability so that we can distinguish between signal and noise due to natural climate variability when computing feature importance. The use of perturbed initial condition ensembles introduces variability mimicking the natural variability in the atmosphere; thus the signals emerging using feature importance (FI) can be evaluated against the natural variability in the climate system. For our analyses, we consider the 1991 volcanic eruption of Mount Pinatubo, which was a large stratospheric aerosol injection. We explore the climate pathway associated with the eruption from aerosols to radiation to temperature at both the near-surface and stratospheric levels. In addition to applying the method to data generated from two different ESMs, we apply stZFI to reanalysis data to compare the associations identified by stZFI. We show how stZFI tracks the importance of aerosol optical depth over time on forecasting temperatures. This case study illustrates usefulness of an ML tool (stZFI) for EDA on a well-studied climate exemplar.

Ries, Daniel (ORCID:0000000250294647)↗

Identification of Chemical Attribution Signatures of Fentanyl Syntheses Using Multivariate Statistical Analysis of Orthogonal Analytical Data

Attribution of the origin of an illicit drug relies on identification of compounds indicative of its clandestine production and is a key component of many modern forensic investigations. The results of these studies can yield detailed information on method of manufacture, starting material source, and final product - all critical forensic evidence. In the present work, chemical attribution signatures (CAS) associated with the synthesis of the analgesic fentanyl, N-(1-phenylethylpiperidin-4-yl)-N-phenylpropanamide, were investigated. Six synthesis methods, all previously published fentanyl synthetic routes or hybrid versions thereof, were studied in an effort to identify and classify route-specific signatures. 160 distinct compounds and inorganic species were identified using gas and liquid chromatographies combined with mass spectrometric methods (GC-MS and LCMS/ MS-TOF) in conjunction with inductively coupled plasma mass spectrometry (ICPMS). The complexity of the resultant data matrix urged the use of multivariate statistical analysis. Using partial least squares discriminant analysis (PLS-DA), 87 route-specific CAS were classified and a statistical model capable of predicting the method of fentanyl synthesis was validated and tested against CAS profiles from crude fentanyl products deposited and later extracted from two operationally relevant surfaces: stainless steel and vinyl tile. This work provides the most detailed fentanyl CAS investigation to date by using orthogonal mass spectral data to identify CAS of forensic significance for illicit drug detection, profiling, and attribution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An adjoint-based optimization method for jointly inverting heterogeneous material properties and fault slip from earthquake surface deformation data

SUMMARY Analysis of tectonic and earthquake-cycle associated deformation of the crust can provide valuable insights into the underlying deformation processes including fault slip. How those processes are expressed at the surface depends on the lateral and depth variations of rock properties. The effect of such variations is often tested by forward models based on a priori geological or geophysical information. Here, we first develop a novel technique based on an open-source finite-element computational framework to invert geodetic constraints directly for heterogeneous media properties. We focus on the elastic, coseismic problem and seek to constrain variations in shear modulus and Poisson’s ratio, proxies for the effects of lithology and/or temperature and porous flow, respectively. The corresponding nonlinear inversion is implemented using adjoint-based optimization that efficiently reduces the cost function that includes the misfit between the calculated and observed displacements and a penalty term. We then extend our theoretical and numerical framework to simultaneously infer both heterogeneous Earth’s structure and fault slip from surface deformation. Based on a range of 2-D synthetic cases, we find that both model parameters can be satisfactorily estimated for the megathrust setting-inspired test problems considered. Within limits, this is the case even in the presence of noise and if the fault geometry is not perfectly known. Our method lays the foundation for a future reassessment of the information contained in increasingly data-rich settings, for example, geodetic GNSS constraints for large earthquakes such as the 2011 Tohoku-oki M9 event, or distributed deformation along plate boundaries as constrained from InSAR.

Geochemistry & Geophysics↗

A BAYESIAN ASSESSMENT OF P-VALUES FOR SIGNIFICANCE ESTIMATION OF POWER SPECTRA AND AN ALTERNATIVE PROCEDURE, WITH APPLICATION TO SOLAR NEUTRINO DATA

The usual procedure for estimating the significance of a peak in a power spectrum is to calculate the probability of obtaining that value or a larger value by chance (known as the 'p-value'), on the assumption that the time series contains only noise-typically that the measurements are derived from random samplings of a Gaussian distribution. However, since the use of p-values in other contexts is known to be misleading, it seems prudent to examine the implications of using p-values for significance estimation of power spectra. We really need to know the probability that the time series is-or is not-compatible with the 'null hypothesis' that the measurements are derived from noise. This probability can be calculated by Bayesian analysis, but this requires one to specify and evaluate a second hypothesis that the time series does contain a contribution other than noise. We show that the requirement that the p-value should be identical to the probability that the null hypothesis is true leads to an unacceptable form for the likelihood function associated with this hypothesis. We claim that, for this reason, the p-value is not an acceptable method for significance estimation of a power spectrum. In order to obtain an acceptable significance estimate, it is necessary to explicitly consider a second hypothesis, and the key challenge is to identify an appropriate likelihood function for this hypothesis. We first propose four simple conditions that it seems reasonable to impose on this function. We then examine a general functional form for the function, and find the simplest form (which has one free parameter) that meets these conditions. We then define two different ways of combining information derived from two independent power estimates. One procedure is to calculate the post-probabilities of the null hypothesis, convert these to odds-values, and sum the log-odds. The second procedure is to combine the p-values using a procedure due to R.A. Fisher, and to calculate the corresponding post-probability and hence the corresponding log-odds. It seems sensible-even if not logically essential-to seek a likelihood function for which the two procedures lead to the same answer. We find that this consistency condition may be satisfied, to good approximation, by a special case of the previously proposed likelihood function. We find that the resulting significance estimates are considerably more conservative than those usually associated with the p-values. As two examples, we apply the new procedure to two recent analyses of solar neutrino data: (1) power spectrum analysis of Super-Kamiokande data and (2) the combined analysis of radiochemical neutrino data and irradiance data.

79 ASTRONOMY AND ASTROPHYSICS↗

AN EXTENDED AND MORE SENSITIVE SEARCH FOR PERIODICITIES IN ROSSI X-RAY TIMING EXPLORER/ALL-SKY MONITOR X-RAY LIGHT CURVES

We present the results of a systematic search in {approx}14 years of Rossi X-ray Timing Explorer All-Sky Monitor (ASM) data for evidence of periodicities. Two variations of the commonly used Fourier analysis search method have been employed to significantly improve upon the sensitivity achieved by Wen et al. in 2006, who also searched for periodicities in ASM data. In addition, the present search is comprehensive in terms of sources studied and frequency range covered, and has yielded the detection of the signatures of the orbital periods of eight low-mass X-ray binary systems and of ten high-mass X-ray binaries not listed in the tables of Wen et al. Orbital periods, epochs, signal amplitudes, modulation fractions, and folded light curves are given for each of these systems. Seven of the orbital periods are the most precise reported to date. In the course of this work, the 18.545 day orbital period of IGR J18483-0311 was co-discovered, and the first detections in X-rays were made of the {approx}3.9 day orbital period of LMC X-1 and the {approx}3.79 hr orbital period of 4U 1636-536. The results inform future searches for orbital and other periodicities in X-ray binaries.

79 ASTRONOMY AND ASTROPHYSICS↗

On the scattering correction of fast-ion D-alpha signals on NSTX-U

Analysis of fast-ion D-alpha (FIDA) data on National Spherical Torus Experiment-Upgrade (NSTX-U) shows that the cold Dα line contaminates the FIDA baseline. The scattered light is comparable to the FIDA emission. A scattering correction is required to extract the FIDA signal. Two methods that relate the scattered light contamination to the intensity of the cold Dα line are employed. Here, one method uses laboratory measurements with a calibration lamp; the other method uses data acquired during plasma operation and singular value decomposition analysis. Finally, after correction, both the FIDA spectra and spatial profile are in better agreement with theoretical predictions.

47 OTHER INSTRUMENTATION↗

On the scattering correction of fast-ion D-alpha signal on NSTX-U

Analysis of fast-ion D-alpha (FIDA) data on National Spherical Torus Experiment-Upgrade (NSTX-U) shows that the cold Dα line contaminates the FIDA baseline. The scattered light is comparable to the FIDA emission. A scattering correction is required to extract the FIDA signal. Two methods that relate the scattered light contamination to the intensity of the cold Dα line are employed. One method uses laboratory measurements with a calibration lamp; the other method uses data acquired during plasma operation and singular value decomposition analysis. After correction, both the FIDA spectra and spatial profile are in better agreement with theoretical predictions.

Single value decomposition (SVD)↗

Blueprints for Training Information Bottlenecks for Collider Analyses

Dimensionality reduction is a crucial aspect of data analysis in high energy physics, even if accompanied by information loss. Several methods, including histogram- and kernel-based analyses, are only computationally feasible for low-dimensional data. Furthermore, simulation models used in HEP can often only be validated for low-dimensional data. We provide several blueprints for using machine learning to create low-dimensional data representations (continuous event variables and discrete classification labels) for use in signal discovery and parameter estimation tasks. We also describe how to design the learned representation to facilitate a) searches with unknown model parameters and b) validation of simulation models in data control regions.

43 PARTICLE ACCELERATORS↗

Decision Science for Machine Learning (DeSciML)

The increasing use of machine learning (ML) models to support high-consequence decision making drives a need to increase the rigor of ML-based decision making. Critical problems ranging from climate change to nonproliferation monitoring rely on machine learning for aspects of their analyses. Likewise, future technologies, such as incorporation of data-driven methods into the stockpile surveillance and predictive failure analysis for weapons components, will all rely on decision-making that incorporates the output of machine learning models. In this project, our main focus was the development of decision scientific methods that combine uncertainty estimates for machine learning predictions, with a domain-specific model of error costs. Other focus areas include uncertainty measurement in ML predictions, designing decision rules using multiobjecive optimization, the value of uncertainty reduction, and decision-tailored uncertainty quantification for probability estimates. By laying foundations for rigorous decision making based on the predictions of machine learning models, these approaches are directly relevant to every national security mission that applies, or will apply, machine learning to data, most of which entail some decision context.

97 MATHEMATICS AND COMPUTING↗

The DECADE cosmic shear project III: validation of analysis pipeline using spatially inhomogeneous data

We present the pipeline for the cosmic shear analysis of the Dark Energy Camera All Data Everywhere (DECADE) weak lensing dataset: a catalog consisting of 107 million galaxies observed by the Dark Energy Camera (DECam) in the northern Galactic cap. The catalog derives from a large number of disparate observing programs and is therefore more inhomogeneous across the sky compared to existing lensing surveys. First, we use simulated data-vectors to show the sensitivity of our constraints to different analysis choices in our inference pipeline, including sensitivity to residual systematics. Next we use simulations to validate our covariance modeling for inhomogeneous datasets. Finally, we show that our choices in the end-to-end cosmic shear pipeline are robust against inhomogeneities in the survey, by extracting relative shifts in the cosmology constraints across different subsets of the footprint/catalog and showing they are all consistent within 1σ to 2σ. This is done for forty-six subsets of the data and is carried out in a fully consistent manner: for each subset of the data, we re-derive the photometric redshift estimates, shear calibrations, survey transfer functions, the data vector, measurement covariance, and finally, the cosmological constraints. Our results show that existing analysis methods for weak lensing cosmology can be fairly resilient towards inhomogeneous datasets. This also motivates exploring a wider range of image data for pursuing such cosmological constraints.

79 ASTRONOMY AND ASTROPHYSICS↗

An introduction to the significance of sample size in particle analyses for nuclear forensics and radiological investigations

Particulate isotopic analysis in nuclear forensics has developed rapidly during the past two decades due to technical advances in determining the isotopic composition of individual particles. This paper introduces basic statistical concepts that can be applied by analysts to understand the importance of statistical adequacy when interpretating particle data. While these basic statistical methods provide a useful point-of-entry to particle data analysis, more sophisticated statistical and modeling approaches are needed to extract maximal information from such datasets in the future.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

GEOMETRIC AND DYNAMICAL MODELS OF REVERBERATION MAPPING DATA

We present a general method to analyze reverberation (or echo) mapping data that simultaneously provides estimates for the black hole mass and for the geometry and dynamics of the broad-line region (BLR) in active galactic nuclei (AGNs). While previous methods yield a typical scale size of the BLR or a reconstruction of the transfer function, our method directly infers the spatial and velocity distribution of the BLR from the data, from which a transfer function can be easily derived. Previous echo mapping analysis requires an independent estimate of a scaling factor known as the virial coefficient to infer the mass of the black hole, but this is not needed in our more direct approach. We use the formalism of Bayesian probability theory and implement a Markov Chain Monte Carlo algorithm to obtain estimates and uncertainties for the parameters of our BLR models. Fitting of models to the data requires knowledge of the continuum flux at all times, not just the measured times. We use Gaussian Processes to interpolate and extrapolate the continuum light curve data in a fully consistent probabilistic manner, taking the associated errors into account. We illustrate our method using simple models of BLR geometry and dynamics and show that we can recover the parameter values of our test systems with realistic uncertainties that depend upon the variability of the AGN and the quality of the reverberation mapping observing campaign. With a geometry model we can recover the mean radius of the BLR to within {approx}0.1 dex random uncertainty for simulated data with an integrated line flux uncertainty of 1.5%, while with a dynamical model we can recover the black hole mass and the mean radius to within {approx}0.05 dex random uncertainty, for simulated data with a line profile average signal-to-noise ratio of 4 per spectral pixel. These uncertainties do not include modeling errors, which are likely to be present in the analysis of real data, and should therefore be considered as lower limits to the accuracy of the method.

79 ASTRONOMY AND ASTROPHYSICS↗