Search NASA⌕ Search

SEARCH · Search NASA

Results for “parameter selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Simulating the Dynamics of the CX-100 Wind Turbine Blade: Model Selection Using a Robustness Criterion

Several plausible modeling strategies are available to develop finite element (FE) models of ever-increasingly complex phenomena. Expert judgment is typically used to choose which strategy to employ, while the “best” modeling approach remains unknown. This paper proposes a decision analysis framework that offers a systematic and rigorous methodology for comparing plausible modeling strategies. The proposed framework departs from the conventional approach that considers only test-analysis correlation to select the model that provides the highest degree of fidelity-to-data. The novelty of the framework lies in an exploration of the trade-offs between robustness to uncertainty and fidelity-to-data. Exploring robustness to model imprecision and inexactness, in addition to fidelity-to-data, lends credibility to the simulation by guaranteeing that its predictions can be trusted even if some of the modeling assumptions and input parameters are incorrect. To demonstrate this approach, an experimental configuration is analyzed in which large masses are used to load the CX-100 wind turbine blade in bending during vibration testing. Two plausible simulations are developed with differing strategies to implement these large masses using (i) a combination of point-mass and spring elements or (ii) solid elements. In this paper, the authors study the ability of the two FE models to predict the experimentally obtained natural frequencies, and the robustness of these competing models to uncertainties in the input parameters. Considering robustness for model selection provides the extent to which prediction accuracy deteriorates as the lack-of-knowledge increases. Therefore, the preferable modeling strategy is the one that offers the best compromise between fidelity-to-data and robustness to uncertainty. To predict the bending vibration of the CX-100 wind turbine blade, it is observed that the modeling strategy with solid elements is far superior to the other one in its ability to provide a compromise between fidelity-to-data and robustness to the modeling assumptions. (Approved for unlimited, public release on October xx, 2012, LA-UR-12-xxxx, Unclassified.)

17 WIND ENERGY↗

Orbit IMU alinement interpretation of onboard display data

The space shuttle inertial measurement unit (IMU) alinement algorith was examined to determine the most important alinement starpair selection criterion. Three crew displayed parameters were considered: (1) the results of the separation angle difference (SAD) check for each starpair; (2) the separation angle of each starpair; and (3) the age of each star measurement. It was determined that the SAD for each pair cannot be used to predict the IMu alinement accuracy. If the age of each star measurement is less than approximately 30 minutes, time is a relatively unimportant factor and the most important alinement pair selection criterion is the starpair separation angle. Therefore, when there are three available alinement starpairs and all measurements were taken within the last 30 minutes, the pair with the separation angle closest to 90 degrees should be selected for IMU alinement.

Corson, R.↗

DA WHITE DWARFS OBSERVED IN THE LAMOST PILOT SURVEY

A total of {approx}640, 000 objects from the LAMOST pilot survey have been publicly released. In this work, we present a catalog of DA white dwarfs (DAWDs) from the entire pilot survey. We outline a new algorithm for the selection of white dwarfs (WDs) by fitting Sersic profiles to the Balmer H{beta}, H{gamma}, and H{delta} lines of the spectra, and calculating the equivalent width of the Ca II K line. Two thousand nine hundred sixty-four candidates are selected by constraining the fitting parameters and the equivalent width of the Ca II K line. All the spectra of candidates are visually inspected. We identify 230 DAWDs (59 of which are already included in the Villanova and SDSS WD catalogs), 20 of which are DAWDs with non-degenerate companions. In addition, 128 candidates are classified as DAWDs/subdwarfs, which means the classifications are ambiguous. The result is consistent with the expected DAWD number estimated based on the LEGUE target selection algorithm.

79 ASTRONOMY AND ASTROPHYSICS↗

Improving Gas Selectivity in Membranes Using Polymer-Grafted Silica Nanoparticles

Herein, we demonstrate that tuning of structural parameters and material chemistry enables control of the permeability and selectivity of gases (CO 2 , He, and CH 4 ) in membranes based on poly(butyl methacrylate)-grafted nanoparticles (PGNs). Our data show that the presence of nanoparticles and the overall dense packing of grafted chains noticeable in PGNs with low grafting density have an adverse effect on the diffusivity of gases. This effect is compensated by an improvement in the solubility of CO 2 gas promoted by the silica nanoparticle surface, yielding a substantial improvement in the permeability of CO 2 versus CH 4 . Furthermore, in membranes with high grafting density, changes in the structural arrangements and alterations in the membrane porosity, evident from small-angle X-ray scattering and positron annihilation lifetime spectroscopy, positively influence the permeability of He and CO 2 gases. In contrast, CH 4 permeability in the same membranes is significantly suppressed, suggesting the formation of a unique, highly selective environment for gas separation. As a result, an improvement of up to 50% in selectivity for gas pairs containing large CH 4 molecules is observed. Our studies provide fundamental insights into the role that structural parameters play in gas transport through polymer membranes, laying a foundation for the rational design of membranes with improved permeability and selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low-Cost Evaluation of EO-1 Hyperion and ALI for Detection and Biophysical Characterization of Forest Logging in Amazonia (NCC5-481)

Major uncertainties exist regarding the rate and intensity of logging in tropical forests worldwide: these uncertainties severely limit economic, ecological, and biogeochemical analyses of these regions. Recent sawmill surveys in the Amazon region of Brazil show that the area logged is nearly equal to total area deforested annually, but conversion of survey data to forest area, forest structural damage, and biomass estimates requires multiple assumptions about logging practices. Remote sensing could provide an independent means to monitor logging activity and to estimate the biophysical consequences of this land use. Previous studies have demonstrated that the detection of logging in Amazon forests is difficult and no studies have developed either the quantitative physical basis or remote sensing approaches needed to estimate the effects of various logging regimes on forest structure. A major reason for these limitations has been a lack of sufficient, well-calibrated optical satellite data, which in turn, has impeded the development and use of physically-based, quantitative approaches for detection and structural characterization of forest logging regimes. We propose to use data from the EO-1 Hyperion imaging spectrometer to greatly increase our ability to estimate the presence and structural attributes of selective logging in the Amazon Basin. Our approach is based on four "biogeophysical indicators" not yet derived simultaneously from any satellite sensor: 1) green canopy leaf area index; 2) degree of shadowing; 3) presence of exposed soil and; 4) non-photosynthetic vegetation material. Airborne, field and modeling studies have shown that the optical reflectance continuum (400-2500 nm) contains sufficient information to derive estimates of each of these indicators. Our ongoing studies in the eastern Amazon basin also suggest that these four indicators are sensitive to logging intensity. Satellite-based estimates of these indicators should provide a means to quantify both the presence and degree of structural disturbance caused by various logging regimes. Our quantitative assessment of Hyperion hyperspectral and ALI multi-spectral data for the detection and structural characterization of selective logging in Amazonia will benefit from data collected through an ongoing project run by the Tropical Forest Foundation, within which we have developed a study of the canopy and landscape biophysics of conventional and reduced-impact logging. We will add to our base of forest structural information in concert with an EO-1 overpass. Using a photon transport model inversion technique that accounts for non-linear mixing of the four biogeophysical indicators, we will estimate these parameters across a gradient of selective logging intensity provided by conventional and reduced impact logging sites. We will also compare our physical ly-based approach to both conventional (e.g., NDVI) and novel (e.g., SWIR-channel) vegetation indices as well as to linear mixture modeling methods. We will cross-compare these approaches using Hyperion and ALI imagers to determine the strengths and limitations of these two sensors for applications of forest biophysics. This effort will yield the first physical ly-based, quantitative analysis of the detection and intensity of selective logging in Amazonia, comparing hyperspectral and improved multi-spectral approaches as well as inverse modeling, linear mixture modeling, and vegetation index techniques.

Asner, Gregory P.↗

Texture Manipulation and Its Impact on Electrical Properties of Zinc Phosphide Thin Films

Both randomly oriented and highly (220) textured thin films of zinc phosphide (Zn3P2) were grown by the close-space sublimation method. The effect of deposition parameters, such as pressure and substrate temperature, on the texture evolution has been established. It was found that the deposition temperature plays a dominant role in determining the preferred orientation whereas the ambient pressure (below 10 Torr) does not greatly affect the film texture. We further found that the microstrain changes from tensile at lower deposition temperatures to compressive at higher deposition temperatures. The preferred orientation also had a strong impact on the electrical resistivity of the films. The results provide guidance on the selection of substrate and deposition parameters to grow Zn3P2 thin films with desirable properties.

14 SOLAR ENERGY↗

Dry-etching properties of TiN for metal/high-k gate stack using BCl{sub 3}-based inductively coupled plasma

The etch rate of TiN film and the selectivities of TiN/SiO{sub 2} and TiN/HfO{sub 2} were systematically investigated in Cl{sub 2}/BCl{sub 3}/Ar plasmas as functions of Cl{sub 2} flow rate, radio-frequency (rf) power, and direct-current (dc) bias voltage under different substrate temperatures of 10 and 80 degree sign C. The etch rate of TiN films increased with increasing Cl{sub 2} flow rate, rf power, and dc-bias voltage at a fixed substrate temperature. In addition, the etch rate of TiN films at 80 degree sign C were higher than that at 10 degree sign C when other plasma parameters were fixed. However, the selectivities of TiN/SiO{sub 2} and TiN/HfO{sub 2} showed different tendencies compared with etch-rate behavior as a function of rf power and dc bias voltage. The relative-volume densities of Ar (750.0 nm), Cl (725.2 nm), and Cl{sup +} (386.6 nm) were monitored with an optical-emission spectroscopy. When rf power increased, the relative-volume densities of all studied particles were increased. X-ray photoelectron spectroscopy was carried out to detect nonvolatile etch by-products from the surface, and nonvolatile peaks (TiCl{sub x} bonds) in Ti 2p and Cl 2p were observed due to their high melting points. Based on the experimental results, we can conclude that the TiN etch is dependent on the substrate temperature when other plasma parameters are fixed. This can be explained by the enhanced chemical pathway with the assistance of ion bombardment.

36 MATERIALS SCIENCE↗

PROSPECTS FOR JOINT GRAVITATIONAL-WAVE AND ELECTROMAGNETIC OBSERVATIONS OF NEUTRON-STAR-BLACK-HOLE COALESCING BINARIES

Coalescing neutron-star-black-hole (NS-BH) binaries are a promising source of gravitational-wave (GW) signals detectable with large-scale laser interferometers such as the Advanced Laser Interferometer Gravitational-Wave Observatory and Virgo. They are also one of the main short gamma-ray burst (SGRB) progenitor candidates. If the black hole (BH) tidally disrupts its companion, an SGRB may be ignited when a sufficiently massive accretion disk forms around the remnant BH. Detecting an NS-BH coalescence both in the GW and electromagnetic (EM) spectrum offers a wealth of information about the nature of the source. How much can actually be inferred from a joint detection is unclear, however, as a mass/spin degeneracy may reduce the GW measurement accuracy. To shed light on this problem and on the potential of joint EM+GW observations, we here combine recent semi-analytical predictions for the remnant disk mass with estimates of the parameter-space portion that is selected by a GW detection. We identify cases in which an SGRB ignition is supported, others in which it can be excluded, and finally others in which the outcome depends on the chosen model for the currently unknown NS equation of state. We pinpoint a range of systems that would allow us to place lower bounds on the equation of state stiffness if both the GW emission and its EM counterpart are observed. The methods we develop can broaden the scope of existing GW detection and parameter-estimation algorithms and could allow us to disregard about half of the templates in an NS-BH search following an SGRB trigger, increasing its speed and sensitivity.

79 ASTRONOMY AND ASTROPHYSICS↗

Analysis of Moessbauer Data from Mars: A Database and Artificial Neural Network for Identification of Iron-bearing Phases

The exploration of the planet Mars is one of the major goals within the Solar system exploration programs of the US-American space agency NASA and the European Space Agency ESA. In particular the search for water and life and understanding of the history of the surface and atmosphere will be the major tasks of the upcoming space missions to Mars. The miniaturized Moessbauer spectrometer MIMOS II has been selected for the NASA Mars-Exploration-Rover twin-mission to Mars in 2003 and the ESA 2003 Mars-Express Beagle 2 mission. Reduced in size and weight, in comparison to ordinary laboratory setup, the sensor head just weights approximately 400 g, with a volume of (50x50x90) cu mm, and holds two gamma-ray sources: the stronger for experiments and the weaker for calibrations. The collimator (in sample direction) also shields the primary radiation off the detectors. Around the drive four detectors are mounted. The detectors are made of Si-PIN-photodiodes in chip form (100 sq mm, thickness of 0.5 mm). The control unit is located in a separate electronics board. This board is responsible for the power supply, generation of the drive's velocity reference signal, read of the detector pulses to record the spectrum, data storage and communication with the host computer. After more than four decades from the discovery of the Moessbauer effect, more than 400 minerals were studied at different temperatures. Their Moessbauer parameters were reported in the literature, and have been recently collected in a data bank. Previous Mars-missions, namely Viking and Mars Pathfinder, revealed Si, Al, Fe, Mg, Ca, K, Ti, S and Cl to be the major constituents in soil and rock elemental composition of the red planet. More than 200 minerals already studied by Moessbauer spectroscopy contain significant amounts of these elements. A considerable number of Moessbauer studies were also carried out on meteorites and on Moon samples. Looking backward in the studies of the whole Moessbauer community, we have built a specific library containing Moessbauer parameters of those possible Mars minerals. The selected minerals, their Moessbauer parameter values (min. max. s.d and number of available data), main site substitution, behavior as a function of temperature and a ranking as expected to be found on Mars were organized. Mars-analogue Fe-bearing minerals not studied by Moessbauer spectroscopy are being collected and investigated. In addition, it an identification system based on Artificial Neural Networks (ANN) was implemented which enables fast and precise mineral identification from the experimental Moessbauer parameters at a given temperature.

P A de Souza Jr.↗

Enabling Real-time Scattering Data Analysis with Scalable Optimization [Slides]

Diffraction experiments produce datasets with rich multidimensional physics information such as microstructure, equations of state, crystal structure, elastoplastic properties, and other key inputs to LANL mission-essential multiphysics models. This information is typically extracted through a process called Rietveld refinement, which involves selecting appropriate models of the instrument, crystal structure, and microstructure, identifying suitable starting values, and then fitting often hundreds of model parameters using a sequence of empirical parameter turnon/off sequences within a non-global gradient-based optimization. Extensive user expertise is required to properly setup a refinement, identify appropriate models, and select initial parameter values close to truth, such that the refinement will yield parameter values that are optimally predictive. This is a very tedious manual process performed far after the beamline campaign has ended. As facilities have become capable of generating larger volumes of data, the limitation in throughput due to Rietveld refinement has led to a dramatic increase in unanalyzed data as opposed to an intended increase in new science. In our FY22 TED, we demonstrated an integrated toolset providing near real-time automated Rietveld analysis. If this toolset can be optimized to provide automated Rietveld analysis in real-time, this could alleviate the bottleneck in unanalyzed diffraction data, aid in decision-making during experiments, and increase efficiency of the facility.

74 ATOMIC AND MOLECULAR PHYSICS↗

Method for rapid development of additive manufacturing parameter set

An apparatus includes a control system that defines a test part having multiple features of multiple feature types. The control system controls an additive manufacturing (AM) machine to print multiple copies of the test part, with each copy being printed according to a respective set of values used as printing parameters. A measurement system obtains a computed tomography (CT) image of each of the copies of the test part. An analysis system, for each of the plurality of feature types, analyzes the CT images to identify a selected set of values for the printing parameters. The analysis system identifies a portion of the CT image related to a first feature and assesses its density based on an average grayscale value. The AM machine is then controlled to print production parts according to, for each feature type of the production parts, the selected set of values for the printing parameters.

Bhattad, Pradeep↗

Error analysis for semi-analytic displacement derivatives with respect to shape and sizing variables

Sensitivity analysis is fundamental to the solution of structural optimization problems. Consequently, much research has focused on the efficient computation of static displacement derivatives. As originally developed, these methods relied on analytical representations for the derivatives of the structural stiffness matrix (K) with respect to the design variables (b sub i). To extend these methods for use with complex finite element formulations and facilitate their implementation into structural optimization programs using the general finite element method analysis codes, the semi-analytic method was developed. In this method the matrix the derivative of K/the derivative b sub i is approximated by finite difference. Although it is well known that the accuracy of the semi-analytic method is dependent on the finite difference parameter, recent work has suggested that more fundamental inaccuracies exist in the method when used for shape optimization. Another study has argued qualitatively that these errors are related to nonuniform errors in the stiffness matrix derivatives. The accuracy of the semi-analytic method is investigated. A general framework was developed for the error analysis and then it is shown analytically that the errors in the method are entirely accounted for by errors in delta K/delta b sub i. Furthermore, it is demonstrated that acceptable accuracy in the derivatives can be obtained through careful selection of the finite difference parameter.

Fenyes, Peter A.↗

Data vs. information: A system paradigm

The data system designer requires data parameters, and is dependent on the user to convert information needs to these data parameters. This conversion will be done with more or less accuracy, beginning a chain of inaccuracies which propagate through the system, and which, in the end, may prevent the user from converting the data received into the information required. The concept to be pursued is that errors occur in various parts of the system, and, having occurred, propagate to the end. Modeling of the system may allow an estimation of the effects at any point and the final accumulated effect, and may prove a method of allocating an error budget among the system components. The selection of the various technical parameters which a data system must meet must be done in relation to the ability of the user to turn the cold, impersonal data into a live, personal decision or piece of information.

Billingsley, F. C.↗

Characterize Aerosols from MODIS MISR OMI MERRA-2: Dynamic Image Browse Perspective

Among the known atmospheric constituents, aerosols still represent the greatest uncertainty in climate research. To understand the uncertainty is to bring altogether of observational (in-situ and remote sensing) and modeling datasets and inter-compare them synergistically for a wide variety of applications that can bring far-reaching benefits to the science community and the broader society. These benefits can best be achieved if these earth science data (satellite and modeling) are well utilized and interpreted. Unfortunately, this is not always the case, despite the abundance and relative maturity of numerous satellite-borne sensors routinely measure aerosols. There is often disagreement between similar aerosol parameters retrieved from different sensors, leaving users confused as to which sensors to trust for answering important science questions about the distribution, properties, and impacts of aerosols. NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) have developed a new visualization service (NASA Level 2 Data Quality Visualization, DQViz)supporting various visualization and data accessing capabilities from satellite Level 2(MODISMISROMI) and long term assimilated aerosols from NASA Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2 displaying at their own native physical-retrieved spatial resolution. Functionality will include selecting data sources (e.g., multiple parameters under the same measurement), defining area-of-interest and temporal extents, zooming, panning, overlaying, sliding, and data subsetting and reformatting.

data quality↗

Stochastic Modeling of Radioactive Material Releases

Nonreactor nuclear facilities operated under the approval authority of the U.S. Department of Energy use unmitigated hazard evaluations to determine if potential radiological doses associated with design basis events challenge or exceed dose evaluation guidelines. Unmitigated design basis events that sufficiently challenge dose evaluation guidelines or exceed the guidelines for members of the public or workers, merit selection of safety structures, systems, or components or other controls to prevent or mitigate the hazard. Idaho State University, in collaboration with Idaho National Laboratory, has developed a portable and simple to use software application called SODA (Stochastic Objective Decision-Aide) that stochastically calculates the radiation dose associated with hypothetical radiological material release scenarios. Rather than producing a point estimate of the dose, SODA produces a dose distribution result to allow a deeper understanding of the dose potential. SODA allows users to select the distribution type and parameter values for all of the input variables used to perform the dose calculation. SODA then randomly samples each distribution input variable and calculates the overall resulting dose distribution. In cases where an input variable distribution is unknown, a traditional single point value can be used. SODA was developed using the MATLAB coding framework. The software application has a graphical user input. SODA can be installed on both Windows and Mac computers and does not require MATLAB to function. SODA provides improved risk understanding leading to better informed decision making associated with establishing nuclear facility material-at-risk limits and safety structure, system, or component selection. It is important to note that SODA does not replace or compete with codes such as MACCS or RSAC, rather it is viewed as an easy to use supplemental tool to help improve risk understanding and support better informed decisions. The work was funded through a grant from the DOE Nuclear Safety Research and Development Program.

61 RADIATION PROTECTION AND DOSIMETRY↗

Instrumentation and Control Selection for the 12 GeV Hall-B Magnets at Jefferson Lab

Here, as part of the Jefferson Lab 12 GeV accelerator upgrade, the Experimental Physics Hall B detector system requires two superconducting magnets – a Torus and a Solenoid. The specifications required maximum space for the detectors which led to the choice of conduction cooling for each magnet. The Torus consists of 6 trapezoidal 'race-track'-type coils connected in series with an operating current of 3770 A. The Solenoid is an actively shielded 5 Tesla magnet consisting of 5 coils connected in series operating at 2416 A. Within the hall the two magnets are located in close proximity to each other and are surrounded by particle detectors. We describe the philosophy behind the instrumentation selection and control design that accounts for this proximity and other challenging working conditions. We describe the choice of sensor technologies, as well as the control and data acquisition methods. The magnet power and cryogenic control sub-systems are implemented using Allen Bradley Control Logix 1756-L72 Programmable Logic Controllers. Sensor instrumentation read-backs are routed into the PLC via National Instruments cRIO hardware (Field Programmable Gate Arrays or FPGA/RT application) using Jefferson Lab designed FPGA-based multi-sensor-excitation-chassis. Configuration, monitoring, and alarm handlers for the magnet systems are provided via an Experimental Physics Instrumentation & Control System interface (EPICS). Failure Modes and Effects Analysis (FMEA) and the requirement to monitor critical parameters during operation guided the selection of instrumentation and associated hardware. The design of the quench protection and voltage tap sub-systems was driven by the anticipated level of voltages developed during a magnet quench. The primary hard-wired quench detection and protection sub-system together with the secondary PLC-based protection sub-system is also discussed. The successful commissioning and subsequent performance of these magnets demonstrates the robustness of the design and implementation approach that was adopted by the Jefferson Lab team and serves as an excellent 'How To' guide for future projects of this size and complexity.

12 GeV↗

Effect of Precursor Selection on the Photocatalytic Performance of Indium Oxide Nanomaterials for Gas-Phase CO 2 Reduction

Nonstoichiometric indium oxide nanoparticles, In 2 O 3–x (OH)y, have been shown to function as active photocatalysts for gas-phase CO 2 reduction under simulated solar irradiation. We demonstrate that the choice of starting material has a strong effect on the photocatalytic activity of indium oxide nanoparticles. We also examine three indium oxide materials prepared via the thermal decomposition of either indium(III) hydroxide or indium(III) nitrate and correlate their stability and photocatalytic activity to the number and type of defect present in the material. Furthermore, we use 13CO 2 isotope-tracing experiments to clearly identify the origins of the observed carbon-containing products. Significantly, we find that the oxidizing nature of the precursor anion has a substantial impact on the defect formation within the sample. Our study demonstrates the importance of surface defects in designing an active heterogeneous photocatalyst and provides valuable insight into key parameters for the precursor design, selection, and performance optimization of materials for gas-phase CO 2 reduction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Engineering Gram Selectivity of Mixed‐Charge Gold Nanoparticles by Tuning the Balance of Surface Charges

Abstract Nanoparticles covered with ligand shells comprising both positively and negatively charged ligands exhibit Gram‐selective antibacterial action controlled by a single experimental parameter, namely the proportion of [+] and [−] ligands tethered onto these particles. Gram selectivity is attributed to the interplay between polyvalent electrostatic and non‐covalent interactions that work in unison to disrupt the bacterial cell wall. The [+/−] nanoparticles are effective in low doses, are non‐toxic to mammalian cells, and are tolerated well in mice. These results constitute the first example of rational engineering of Gram selectivity at the (macro)molecular level.

Pillai, Pramod P.↗