Search NASA⌕ Search

SEARCH · Search NASA

Results for “sampling methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

High Precision Isotopic Analysis of Actinide Bearing Materials: Performance of a New Generation of Purpose Built Actinide Multi-Collector ICPMS Instruments

Recently, a new class of multi-collector inductively coupled plasma mass spectrometers (MC-ICPMS) has been introduced commercially that includes detector arrays purpose built for actinide measurements. These detector arrays significantly enhance the data quality possible for applications encountered in nuclear forensics. Two such instruments are described in this paper, the NeptunePlusTM, developed by Thermo-Fisher (Bremen, Germany), and the NuPlasma2, developed by Nu Instruments (Wrexham, UK). Research results are presented that have been obtained by the authors using the first commercial NeptunePlusTM. This paper also presents performance characteristics and results for traditional liquid introduction, including a means for ultra-trace detection via electrochemical separation prior to solution nebulization, as well as solid sample introduction with femtosecond-laser ablation. We also discuss the advantages and limitations of the current systems for detection of the transient signals associated with these two methods for introducing sample into the plasma.

electrochemical separation↗

A new comprehensive method for detection of livestock-related pathogenic viruses using a target enrichment system

Highlights: • Development of a comprehensive method to detect viruses using SureSelect system. • A method by which almost the full length of the viral genome can be determined without virus isolation. • Widely available methods for comprehensive analysis of virus genomic information. We tested usefulness of a target enrichment system SureSelect, a comprehensive viral nucleic acid detection method, for rapid identification of viral pathogens in feces samples of cattle, pigs and goats. This system enriches nucleic acids of target viruses in clinical/field samples by using a library of biotinylated RNAs with sequences complementary to the target viruses. The enriched nucleic acids are amplified by PCR and subjected to next generation sequencing to identify the target viruses. In many samples, SureSelect target enrichment method increased efficiencies for detection of the viruses listed in the biotinylated RNA library. Furthermore, this method enabled us to determine nearly full-length genome sequence of porcine parainfluenza virus 1 and greatly increased Breadth, a value indicating the ratio of the mapping consensus length in the reference genome, in pig samples. Our data showed usefulness of SureSelect target enrichment system for comprehensive analysis of genomic information of various viruses in field samples.

60 APPLIED LIFE SCIENCES↗

AC Susceptibility of BaZrO{sub 3} Nanoparticles Added YBa{sub 2}Cu{sub 3}O{sub 7−δ} Superconductor Prepared via Coprecipitation Method

In this work, magnetic properties of polycrystalline samples YBa{sub 2}Cu{sub 3}O{sub 7−δ} added with x mol.% of BaZrO{sub 3} (BZO) nanoparticles (x = 0.0, 1.0, 2.0, 3.0, 5.0, and 7.0) were studied by AC susceptibility (ACS) measurement. The samples were prepared using coprecipitation (COP) method. X-ray diffraction (XRD) results showed that all the samples were composed of Y-123 as the major phase and Y-211 as the secondary phase. XRD peak of BZO was also observed in the samples added with BZO nanoparticles. The intensity of the peak became higher with increasing amount of BZO addition indicating the presence of increased amount of the unreacted nanoparticles in the samples. The refined lattice parameters indicated that all the samples have an orthorhombic crystal structure without the occurrence of orthorhombic-tetragonal phase transformation. Scanning electron microscopy (SEM) images showed that the samples have randomly distributed grains with irregular shape. The average grain size increased from 0.30 μ m for the pure sample to 0.50 μ m for the BZO addition of 7.0 mol.%. ACS measurement showed a slight decrease of onset critical temperature, T{sub c−onset} (< 1 K) with BZO addition. Both phase lock-in temperature, T{sub cj}, and coupling peak temperature, T{sub p}, remained relatively unchanged for BZO addition up to 3.0 mol.%. Based on the Bean critical state model, the calculated intergranular critical current density, J{sub cm}, for the pure sample is 1.88 A/cm{sup 2} at T{sub p} = 84.8 K. For the sample added with 7.0 mol.% of BZO, J{sub cm} at T{sub p} = 83.6 K is 1.95 A/cm{sup 2}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Stabilized multilevel Monte Carlo method for stiff stochastic differential equations

A multilevel Monte Carlo (MLMC) method for mean square stable stochastic differential equations with multiple scales is proposed. For such problems, that we call stiff, the performance of MLMC methods based on classical explicit methods deteriorates because of the time step restriction to resolve the fastest scales that prevents to exploit all the levels of the MLMC approach. We show that by switching to explicit stabilized stochastic methods and balancing the stabilization procedure simultaneously with the hierarchical sampling strategy of MLMC methods, the computational cost for stiff systems is significantly reduced, while keeping the computational algorithm fully explicit and easy to implement. Numerical experiments on linear and nonlinear stochastic differential equations and on a stochastic partial differential equation illustrate the performance of the stabilized MLMC method and corroborate our theoretical findings.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cadmium exposure is associated with soluble urokinase plasminogen activator receptor, a circulating marker of inflammation and future cardiovascular disease

Background: Diet and smoking are the main sources of cadmium exposure in the general population. Cadmium increases the risk of cardiovascular diseases, and experimental studies show that it induces inflammation. Blood cadmium levels are associated with macrophages in human atherosclerotic plaques. Soluble urokinase-type plasminogen activator receptor (suPAR) is an emerging biomarker for cardiovascular events related to inflammation and atherosclerotic plaques. The aim was to examine whether blood cadmium levels are associated with circulating suPAR and other markers of inflammation. Methods: A population sample of 4648 Swedish middle-aged women and men was examined cross-sectionally in 1991–1994. Plasma suPAR was assessed by ELISA, leukocytes were measured by standard methods, and blood cadmium was analysed by inductively coupled plasma mass spectrometry. Prevalent cardiovascular disease, ultrasound-assessed carotid plaque occurrence, and several possible confounding factors were recorded. Results: After full adjustment for risk factors and confounding variables, a 3-fold increase in blood cadmium was associated with an 10.9% increase in suPAR concentration (p<0.001). In never-smokers, a 3-fold increase in blood cadmium was associated with a 3.7% increase in suPAR concentration (p<0.01) after full adjustment. Blood cadmium was not associated with C-reactive protein, white blood cell count and Lp-PLA2 but with neutrophil/lymphocyte ratio in one of two statistical models. Conclusions: Exposure to cadmium was associated with increased plasma suPAR in the general population, independently of smoking and cardiovascular disease. These results imply that cadmium is a possible cause for raised levels of this inflammatory marker. - Highlights: • Cadmium is a toxic proinflammatory, proatherosclerotic metal. • Soluble urokinase-type plasminogen activator receptor (suPAR) in plasma is a promising proinflammatory marker of atherosclerosis. • Blood cadmium and plasma suPAR were measured in a cohort of 4648 Swedish men and women. • Blood cadmium was positively associated with plasma suPAR, also in never smokers.

60 APPLIED LIFE SCIENCES↗

Controlled synthesis of BiVO{sub 4} with multiple morphologies via an ethylenediamine-assisted hydrothermal method

Graphical abstract: BiVO{sub 4} samples with various morphologies were synthesized via a simple ethylenediamine (EN) assisted hydrothermal route. One of the mixed crystal phase with spherical and porous morphology showed excellent photocatalytic activity and about 90% Rhodamine B was degraded after 140 min visible light irradiation. - Highlights: • BiVO{sub 4} samples with various morphologies were synthesized by hydrothermal method. • Ethylenediamine mainly acts as alkaline source to adjust pH values of precursor. • BiVO{sub 4} with spherical morphology has excellent photocatalytic activity. - Abstract: In this work, BiVO{sub 4} particles with different crystal structures and morphologies including hexahedral, spherical porous and hyperbranched ones were fabricated in the presence of ethylenediamine by hydrothermal process. The as-fabricated samples were well characterized by X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy and ultraviolet–visible absorption spectroscopy. The results showed that the morphology and crystal structure of BiVO{sub 4} particles could be well controlled by only changing the ethylenediamine content in the deionized water solution. Photocatalytic activity of the samples was evaluated by the degradation of Rhodamine B under visible-light irradiation. It was shown that BiVO{sub 4} sample with spherical porous morphology and mixed crystal phase exhibited the best photocatalytic performance after optimizing the ethylenediamine content. The best degradation ratio of Rhodamine B could reach about 87% after 140 min visible-light irradiation.

36 MATERIALS SCIENCE↗

Classification of events from α -induced reactions in the MUSIC detector via statistical and ML methods

The Multi-Sampling Ionization Chamber (MUSIC) detector is typically used to measure nuclear reaction cross sections relevant for nuclear astrophysics, fusion studies, and other applications. From the MUSIC data produced in one experiment scientists carefully extract an order of 10 3 events of interest from about 10 9 total events, where each event can be represented by an 18-dimensional vector. However, the standard data classification process is based on expert driven, manually intensive data analysis techniques that require several months to identify patterns and classify the relevant events from the collected data. Here, to address this issue, we present a method for the classification of events originating from specific α-induced reactions by combining statistical and machine learning methods that require significantly less input from the domain scientist, relative to the standard technique. Here, we applied the new method to two experimental data sets and compared our results with those obtained using traditional methods. With few exceptions, the number of events classified by our method agrees within ±20% with the results obtained using traditional methods. With the present method, which is the first of its kind for the MUSIC data, we have established the foundation for the automated extraction of physical events of interest from experiments using the MUSIC detector.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optimization of a Cyclone Using Multiphase Flow Computational Fluid Dynamics

The U.S. Department of Energy National Energy Technology Laboratory's (NETL) 50 kW th chemical looping reactor (CLR) has an underperforming cyclone, which was designed using empirical correlations. To improve the performance of this cyclone using computational fluid dynamics (CFD)-based modeling simulations, four critical design parameters including the vortex tube radius and length, barrel radius, and the inlet width and height were optimized. Here, NETL's open source multiphase flow with interphase exchange (MFiX) CFD code has been used to model a series of cyclones by systematically varying the geometric design parameters. To perform the optimization process, the surrogate modeling and sensitivity analysis followed by the optimization capability in nodeworks was used. The basic methodology for the process is to employ a statistical design of experiments (DOE) method to generate sampling simulations that fill the design space. Corresponding CFD models are then created, executed, and postprocessed. A response surface is created to characterize the relationship between input parameters and the quantities of interest (QoI). Finally, the CFD-surrogate is used by an optimization method to find the optimal design condition based on the objective and constraints prescribed. The resulting optimal cyclone has a larger diameter and longer vortex tube, a larger diameter barrel, and a taller and narrower solids inlet. The improved design has a predicted pressure drop 11 times lower than the original design while reducing the mass loss by a factor of 2.3.

42 ENGINEERING↗

The IEC 61850 Sampled Measured Values Protocol: Analysis, Threat Identification, and Feasibility of Using NN Forecasters to Detect Spoofed Packets

The operation of the smart grid is anticipated to rely profoundly on distributed microprocessor-based control. Therefore, interoperability standards are needed to address the heterogeneous nature of the smart grid data. Since the IEC 61850 emerged as a wide-spread interoperability standard widely accepted by the industry, the Sampled Measured Values method has been used to communicate digitized voltage and current measurements. Realizing that current and voltage measurements (i.e., feedback measurements) are necessary for reliable and secure noperation of the power grid, firstly, this manuscript provides a detailed analysis of the Sampled Measured Values protocol emphasizing its advantages, then, it identifies vulnerabilities in this protocol and explains the cyber threats associated to these vulnerabilities. Secondly, current efforts to mitigate these vulnerabilities are outlined and the feasibility of using neural network forecasters to detect spoofed sampled values is investigated. It was shown that although such forecasters have high spoofed data detection accuracy, they are prone to the accumulation of forecasting error. Accordingly, this paper also proposes an algorithm to detect the accumulation of the forecasting error based on lightweight statistical indicators. The effectiveness of the proposed methods is experimentally verified in a laboratory-scale smart grid testbed.

97 MATHEMATICS AND COMPUTING↗

WHONDRS Surface Water Chemistry and Organic Matter Characterization along the St. Lawrence River's Inland to Coastal Gradient, Eastern North America (v2)

This dataset supports a broader study examining the inland (Lake Ontario) to coastal (North Atlantic Ocean) geochemistry gradient along the St. Lawrence River in Canada and the United States. The St. Lawrence River is unique in that it contains the convergence of multiple water masses with distinct water signatures that mix only slightly as the river flows downstream. The dataset provides dissolved organic carbon (DOC) and organic matter characterization data generated from surface water. Samples were collected by researchers on board the Lampsilis research vessel (l’Université du Québec à Trois-Rivières) and small boats (St. Lawrence River Institute of Environmental Sciences, Cornwall) at 94 locations across and along the St. Lawrence River to capture longitudinal and transverse variation. Related data were collected and will be published separately in collaboration with the MicrEAU Laboratory (François Guillemette; l’Université du Québec à Trois-Rivières) and the Exploration of Coastal Hydrobiogeochemistry Across a Network of Gradients and Experiments (EXCHANGE) program. This dataset is comprised of one main data folder containing (1) file-level metadata; (2) data dictionary; (3) field metadata; (4) dissolved organic carbon (DOC, measured as non-purgeable organic carbon, NPOC) data (5) surface water sampling protocol; (6) readme; (7) methods codes; (8) international geo-sample number (IGSN) mapping file; and (9) folder of high resolution characterization of organic matter via 12 Tesla Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) through the Environmental Molecular Sciences Laboratory (EMSL; https://www.pnnl.gov/environmental-molecular-sciences-laboratory). The FTICR folder contains two subfolders, one containing the .xml data files and the other containing instructions for using Formularity (https://omics.pnl.gov/software/formularity) and an R script to process the data based on the user's specific needs. All files are .csv, .pdf, .R, .ref, or .xml. The data package was originally published in November 202. It was updated in April 2025 (v2; modified files). See the change history section in the readme for details.

54 ENVIRONMENTAL SCIENCES↗

WHONDRS Surface Water Dissolved Organic Carbon and FTICR-MS across Glacial Features in Svalbard 2022

This dataset supports a broader study examining climatic forcing of terrestrial greenhouse gas emission through permafrost and glaciers in Svalbard. The dataset provides geochemistry and organic matter characterization data generated from surface water collected from 11 sites across central Svalbard. Data were also collected in 2021 and can be found at https://data.ess-dive.lbl.gov/view/doi:10.15485/1888571. Additional related data were collected and will be published separately in collaboration with Yde and Kleber.This dataset is comprised of one main data folder containing (1) file-level metadata; (2) data dictionary; (3) field metadata; (4) dissolved organic carbon (DOC; measured as non-purgeable organic carbon; NPOC); (5) surface water sampling protocol; (6) readme; (7) methods codes; (8) international geo-sample number (IGSN) mapping file; (9) a folder of field photos; and (10) folder of high resolution characterization of organic matter via 7 Tesla Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) generated through the Environmental Molecular Sciences Laboratory (EMSL; https://www.pnnl.gov/environmental-molecular-sciences-laboratory). The FTICR folder contains two subfolders, one containing the .xml data files and the other containing instructions for using Formularity (https://omics.pnl.gov/software/formularity) and an R script to process the data based on the user's specific needs. All files are .csv, .pdf, .R, .ref, or .xml.

54 ENVIRONMENTAL SCIENCES↗

Detection of Chymotrypsin by Optical and Acoustic Methods

Chymotrypsin is an important proteolytic enzyme in the human digestive system that cleaves milk proteins through the hydrolysis reaction, making it an interesting subject to study the activity of milk proteases. In this work, we compared detection of chymotrypsin by spectrophotometric dynamic light scattering (DLS) and quartz crystal microbalance (QCM) methods and determined the limit of chymotrypsin detection (LOD), 0.15 ± 0.01 nM for spectrophotometric, 0.67 ± 0.05 nM for DLS and 1.40 ± 0.30 nM for QCM methods, respectively. The sensors are relatively cheap and are able to detect chymotrypsin in 3035 min. While the optical detection methods are simple to implement, the QCM method is more robust for sample preparation, and allows detection of chymotrypsin in non-transparent samples. We give an overview on methods and instruments for detection of chymotrypsin and other milk proteases.

59 BASIC BIOLOGICAL SCIENCES↗

Using automatic differentiation in sensitivity analysis of nuclear simulatoin models.

Sensitivity analysis is an important tool in the study of nuclear systems. In our recent work, we introduced a hybrid method that combines sampling techniques with first-order sensitivity analysis to approximate the effects of uncertainty in parameters of a nuclear reactor simulation model. For elementary examples, the approach offers a substantial advantage (in precision, computational efficiency, or both) over classical methods of uncertainty quantification.

97 MATHEMATICS AND COMPUTING↗

Wedge sampling for computing clustering coefficients and triangle counts on large graphs

Graphs are used to model interactions in a variety of contexts, and there is a growing need to quickly assess the structure of such graphs. Some of the most useful graph metrics are based on triangles, such as those measuring social cohesion. Despite the importance of these triadic measures, algorithms to compute them can be extremely expensive. We discuss the method of wedge sampling. This versatile technique allows for the fast and accurate approximation of various types of clustering coefficients and triangle counts. Furthermore, these techniques are extensible to counting directed triangles in digraphs. Our methods come with provable and practical time-approximation tradeoffs for all computations. We provide extensive results that show our methods are orders of magnitude faster than the state of the art, while providing nearly the accuracy of full enumeration.

97 MATHEMATICS AND COMPUTING↗

On the improvement of measurement accuracy of retained austenite in steel with X-ray diffraction

Highlights: • Improved procedure to determine austenite in steels with crystallographic texture • Extension to X-ray area detectors • Electropolishing is essential to get correct results. - Abstract: An improved measurement scheme for the determination of the retained austenite fraction with X-ray diffraction is extended to area detectors. The scheme reduces the error due to crystallographic texture in phase analysis of steel by averaging the results of diffraction patterns at different sample positions. The method is based on the standard ASTM E975, but it can be easily extended to other crystal structures, multi-phase materials or X-ray wavelengths. Phase transformation, induced by mechanical sample preparation, may lead to a significant reduction of the retained austenite fraction. Electropolishing before the measurement is beneficial to remove the layer affected by sample preparation.

36 MATERIALS SCIENCE↗

Simple method for highlighting the temperature distribution into a liquid sample heated by microwave power field

Microwave induced heating is widely used in medical treatments, scientific and industrial applications. The temperature field inside a microwave heated sample is often inhomogenous, therefore multiple temperature sensors are required for an accurate result. Nowadays, non-contact (Infra Red thermography or microwave radiometry) or direct contact temperature measurement methods (expensive and sophisticated fiber optic temperature sensors transparent to microwave radiation) are mainly used. IR thermography gives only the surface temperature and can not be used for measuring temperature distributions in cross sections of a sample. In this paper we present a very simple experimental method for temperature distribution highlighting inside a cross section of a liquid sample, heated by a microwave radiation through a coaxial applicator. The method proposed is able to offer qualitative information about the heating distribution, using a temperature sensitive liquid crystal sheet. Inhomogeneities as smaller as 1°-2°C produced by the symmetry irregularities of the microwave applicator can be easily detected by visual inspection or by computer assisted color to temperature conversion. Therefore, the microwave applicator is tuned and verified with described method until the temperature inhomogeneities are solved.

36 MATERIALS SCIENCE↗

BAYESIAN ANGULAR POWER SPECTRUM ANALYSIS OF INTERFEROMETRIC DATA

We present a Bayesian angular power spectrum and signal map inference engine which can be adapted to interferometric observations of anisotropies in the cosmic microwave background (CMB), 21 cm emission line mapping of galactic brightness fluctuations, or 21 cm absorption line mapping of neutral hydrogen in the dark ages. The method uses Gibbs sampling to generate a sampled representation of the angular power spectrum posterior and the posterior of signal maps given a set of measured visibilities in the uv-plane. We use a mock interferometric CMB observation to demonstrate the validity of this method in the flat-sky approximation when adapted to take into account arbitrary coverage of the uv-plane, mode-mode correlations due to observations on a finite patch, and heteroschedastic visibility errors. The computational requirements scale as O(n{sub p} log n{sub p}) where n{sub p} measures the ratio of the size of the detector array to the inter-detector spacing, meaning that Gibbs sampling is a promising technique for meeting the data analysis requirements of future cosmology missions.

79 ASTRONOMY AND ASTROPHYSICS↗

Hybrid nested sampling algorithm for Bayesian model selection applied to inverse subsurface flow problems

A Hybrid Nested Sampling (HNS) algorithm is proposed for efficient Bayesian model calibration and prior model selection. The proposed algorithm combines, Nested Sampling (NS) algorithm, Hybrid Monte Carlo (HMC) sampling and gradient estimation using Stochastic Ensemble Method (SEM). NS is an efficient sampling algorithm that can be used for Bayesian calibration and estimating the Bayesian evidence for prior model selection. Nested sampling has the advantage of computational feasibility. Within the nested sampling algorithm, a constrained sampling step is performed. For this step, we utilize HMC to reduce the correlation between successive sampled states. HMC relies on the gradient of the logarithm of the posterior distribution, which we estimate using a stochastic ensemble method based on an ensemble of directional derivatives. SEM only requires forward model runs and the simulator is then used as a black box and no adjoint code is needed. The developed HNS algorithm is successfully applied for Bayesian calibration and prior model selection of several nonlinear subsurface flow problems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗