Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Constructing uniform oxygen defect engineering on primary particle level for high-stability lithium-rich cathode materials

Lithium-rich layered cathode materials are considered to be research focus of cathode candidates for next generation lithium-ion batteries due to their high specific capacity and low cost. However, lattice deoxidation associated with elemental migration and internal local shrinkage usually results in deteriorated cyclic performance and notorious voltage attenuation, severely limiting its application. In this paper, we have successfully injected uniform oxygen defects into surface region of Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 primary particles under the high-pressure and weak carbonate environment. Various experimental investigations indicate that the injected robust oxygen defects can not only mitigate detrimental interfacial reactions but also suppress unfavorable lattice variation and particle breakage. More importantly, theoretical calculations unravel the critical roles of oxygen defects in regulating energy band structure for strengthened anionic reversibility. Owing to stabilization effects of unique oxygen defect engineering, the modified Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 cathode has harvested dramatically enhanced electrochemical performance including a high initial coulombic efficiency of 96.6%, an outstanding capacity retention of 91.96% (1C, 200 cycles) and suppressed voltage decay of only 1.62 mV per cycle. Therefore, this facile and effective defect engineering strategy could establish new guidance for promoting practical application of Li-rich Mn-based cathode material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Decoding the interstitial/vacancy nature of dislocation loops with their morphological fingerprints in face-centered cubic structure

Dislocation loops are critical defects inducing detrimental effects like embrittlement and swelling in materials under irradiation. Distinguishing their nature (interstitial- or vacancy-type) is a long-standing challenge with great implications for understanding radiation damage. Here, we demonstrate that the morphology of radiation-induced Frank loops can unveil their nature in face-centered cubic (fcc) structure: Circular loops are interstitial-type in all fcc materials, while segmented loops are vacancy-type in high stacking fault energy (SFE) alloys but varied-type in low SFE and high-entropy alloys. The polygonal shape is attributed to the dissociation of an a 0 /3<111> dislocation into an a 0 /6<112> Shockley partial and an a 0 /6<110> stair-rod dislocation. The dissociation of vacancy loops is energetically favorable, whereas interstitial loops require external stimuli to promote dislocation propagation. This “morphology-nature” correlation not only highlights the asymmetry of vacancy/interstitial loops but also offers an efficient way to distinguish loop nature for a wide range of materials.

Ma, Kan [City Univ. of Hong Kong, Kowloon (Hong Ko↗
DOE OSTI2024

Structure and disorder resulting in ultralow thermal conductivity in the defect chalcopyrite AgInSnSe 4

Quaternary chalcogenides are attractive for a variety of technological fields of interest due to the diverse physical properties these materials possess. Herein, the structural and thermal properties of the disordered chalcopyrite AgInSnSe 4 are reported revealing a distinct relation between its structure and physical properties. Modeling of the experimental temperature-dependent thermal properties revealed an ultralow thermal conductivity (0.47 Wm -1 K -1 at room temperature) due to lattice anharmonicity, a low speed of sound and a low Debye temperature. Moreover, first principles electronic structure calculations revealed that the Ag-Se tetrahedra within the crystal structure possess relatively weak bonds due to occupied antibonding states from p-d orbital hybridization, which suppress the thermal conductivity. Here, in order to further quantify our findings, we extended our analyses to include comparisons with other ternary and quaternary adamantine materials, all of which possess a fourfold tetrahedral coordination of atoms, in revealing the origin of the thermal properties in AgInSnSe 4 .

36 MATERIALS SCIENCE↗
DOE OSTI2015

Transformation of electronic properties and structural phase transition from HfN to Hf 3 N 4

Here, we report investigation of the structural phase transition and electronic properties of Hf 1-x N (0 <= x <= 0.25) using first principles calculations. The defective NaCl-type structure with Hf vacancies (V Hf ) is found to be stable over a large phase region. Hf 3 N 4 with the Zr 3 N 4 -type structure is only stable in relative small region and readily destabilized when the stoichiometric ratio of N to Hf deviates from 4/3. The electronic and optic properties of Hf 1-x N are controlled by the concentration of V Hf . Finally, the full depletion of excess free electrons from Hf atoms results in the structural phase transition of Hf 3 N 4 .

36 MATERIALS SCIENCE↗
DOE OSTI2016

Synthesis and characterization of porous structured ZnO thin film for dye sensitized solar cell applications

Zinc oxide (ZnO) and zinc oxide/eosin yellow (ZnO/EY) thin films were potentiostatically deposited onto fluorine doped tin oxide (FTO) glass substrate. Effect of eosin yellow dye on structural, morphological and optical properties was studied. X-ray diffraction patterns, micro Raman spectra and photoluminescence (PL) spectra reveal hexagonal wurtzite structure with less atomic defects in 101 plane orientation of the ZnO/EY film. Scanning electron microscopy (SEM) images show flower for ZnO and porous like structure for ZnO/EY thin film, respectively. DSSC was constructed and evaluated by measuring the current density verses voltage curve.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Impact of Halogen Groups on the Properties of PEA–Based 2D Pb–Sn Halide Perovskites

Tuning broad emission in 2D Pb–Sn halide perovskites (HPs) is essential for advancing optoelectronic applications, particularly for color-tunable and white-light-emitting devices. This broad emission is linked to structural factors, such as defects and phase segregation of the Pb component within the Pb–Sn system, which are strongly influenced by the molecular structure and chemical properties of spacer cations. Atomic tuning of the spacers via halogenation opens up a new way to fine-tune the molecular properties, enabling further augmentations of HP functionalities. Nevertheless, the distinct broad emission's sensitivity to spacer chemistry remains underexplored. Here, halogenation's influence is systematically investigated on 2D HP emission characteristics using a high-throughput workflow. These findings reveal that the F-containing phenethylammonium (4F-PEA) spacer narrows the broadband PL, whereas Cl broadens it. Through a correlative study, it is found that 4F-PEA reduces not only the local phase segregation but also the defect levels and microstrains in 2D HPs. This is likely attributed to the manifestation of less lattice distortion via stronger surface coordination of the dipole-augmented 4F-PEA. Furthermore, these results highlight halogenation as a key factor in modulating phase segregation and defect density in 2D Pb–Sn HPs, offering a promising pathway to tune the emission for enhanced optoelectronic performance.

2D Pb-Sn halide perovskites↗
DOE OSTI2015

Characterisation and modelling of defect formation in direct-chill cast AZ80 alloy

Wrought magnesium alloys for demanding structural applications require high quality defect free cast feedstock. The aim of this study was to first identify and characterise typical defects in direct chill cast magnesium–aluminium–zinc (AZ) alloy billet and then use modelling to understand the origins of these defects so they can be prevented. Defects were first located using ultrasonic inspection and were then characterised using X-ray computed tomography (XCT) and serial sectioning, establishing the presence of oxide films and intermetallic particles Al{sub 8}Mn{sub 5} in all defects. A model was developed to predict the flow patterns and growth kinetics of the intermetallic phases during casting, which influence the formation of defects. Simulation of the growth of the intermetallic particles demonstrated that precipitation from the liquid occurs in the mould. The combination of the entrained oxide films and intermetallic particles recirculates in the liquid metal and continues to grow, until large enough to settle, which is predicted to occur at the centre of the mould where the flow is the slowest. Based on these predictions, strategies to reduce the susceptibility to defect formation are suggested. - Highlights: • Casting defects in magnesium direct chill casting have been imaged and characterised in 3-dimensions. • The occurrences of co-located clusters of particles and oxide films have been characterised and explained. • A coupled model has been developed to help interpret the observed trend for defects located towards the centre of billets.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Influence of Particle Size on the Wear Resistance and Strength of Polymer Composites

The wear resistance of polymer composites with components of different particle size and with different filler content is investigated. Formulas are derived for refining the limits of the filler’s supporting properties, in the light of the defects in its multilayer structure. The limiting wall thickness of the structure formed by the nanofiller is determined.

36 MATERIALS SCIENCE↗
DOE OSTI2024

DOC-DICAM: Domain Aware One Class Defect Identification in Composite Aerostructure Material

Fiber-reinforced composites are a common material used in the design of aircraft structures due to their good tensile strength and resistance to compression. During the manufacturing process, these structures are thoroughly inspected for flaws and defects to ensure structural integrity during commercial use. Non-destructive testing (NDT) is a collection of inspection methods that allow inspectors to evaluate material without altering it. Due to the high safety standards in aerospace manufacturing, the NDT process is done manually and can be a significant bottleneck in the development workflow. In this paper, we develop an AI-based assistance tool to drastically reduce inspection time. Typical AI workflows require large amounts of annotated data, but defects rarely occur resulting in strong class imbalance. To overcome this, we formulate the problem of defect identification as an anomaly detection task in which our primary focus is learning non-defect characteristics. To do this, we develop a multi-task self-supervised learning framework that embeds problem specific domain knowledge into the deep learning model. We verify our method using fuselage data generated in a production environment. As a result, we show that our method can effectively identify defects and requires minimal training and inference time.

anomaly detection↗
DOE OSTI2023

Application of a deep learning semantic segmentation model to helium bubbles and voids in nuclear materials

Imaging nanoscale radiation-induced defects using the transmission electron microscope (TEM) is a key factor in the successful implementation of materials for nuclear energy structural applications. Analyzing each defect in a TEM micrograph is currently a manual task. To identify the defects in a single image can take anywhere from 15 min to an hour and a project can require the analysis of anywhere from tens to ≥ 100 images. Here, we use artificial intelligence (AI) models to automate this task. For simplification, we evaluated images with only a single type of defect; helium bubbles. Additionally, we performed semantic segmentation of these helium bubble defects in electron microscopy images of irradiated FeCrAl alloys using a deep learning DefectSegNet model. This model, which was previously used to classify crystal defects, is inspired by the classic DenseNet and U-Net image segmentation models. It claims high spatial resolution, but has poor performance at object boundaries. Our paper improves the DefectSegNet model’s application by adding two new features. First, the DefectSegNet model is applied not only to perform calculation pixel-wise but also object (or feature) wise. Because object-wise metrics are directly relevant to our final goal of detecting bubbles, whereas pixel-wise classification is only an intermediate step, it is an important part of our study. Second, a distance map loss (DML) function has been added to increase its performance at object boundaries. It is crucial to accurately represent defects boundaries, especially bubbles, in order to track the bubble-induced swelling caused by irradiation. The boundary-focused DML function is also compared to other loss functions like Cross-entropy, Weighted Binary Cross Entropy (WBCE), Dice and Intersection over Union (IOU). Finally, by incorporating new features, we found a marked improvement on segmentation quality and better shape preservation at the boundaries and areas of the bubbles.

42 ENGINEERING↗
DOE OSTI2016

Phase stability and microstructures of high entropy alloys ion irradiated to high doses

The microstructures of Al x CoCrFeNi (x = 0.1, 0.75 and 1.5 in molar ratio) high entropy alloys (HEAs) irradiated at room temperature with 3 MeV Au ions at the highest fluence of 105, 91, and 81 displacement per atom, respectively, were studied. Transmission electron microscopy (TEM) and high-resolution TEM (HRTEM) analyses show that the initial microstructures and phase composition of all three alloys are retained after ion irradiation and no phase decomposition is observed. Furthermore, it is demonstrated that the disordered face-centered cubic (FCC) and disordered body-centered cubic (BCC) phases show much less defect cluster formation and structural damage than the NiAl-type ordered B2 phase. This effect is explained by higher entropy of mixing, higher defect formation/migration energies, substantially lower thermal conductivity, and higher atomic level stress in the disordered phases

36 MATERIALS SCIENCE↗
DOE OSTI2017

Novel penta-graphene nanotubes: strain-induced structural and semiconductor–metal transitions

Research into novel one-dimensional (1D) materials and associated structural transitions is of significant scientific interest. It is widely accepted that a 1D system with a short-range interaction cannot have 1D phase transition at finite temperature. In this paper, we propose a series of new stable carbon nanotubes by rolling up penta-graphene sheets, which exhibit fascinating well-defined 1D phase transitions triggered by axial strain. Our first-principles calculations show that such penta-graphene nanotubes (PGNTs) are dynamically stable by phonon calculations, but transform from a tri-layer structure to a highly defective single-walled nanotube at low temperature in molecular dynamics simulations. We show that moderate compressive strains can drive structural transitions of (4,4), (5,5), and (6,6) PGNTs, during which the distances of neighboring carbon dimers in the inner shell have a sudden drop, corresponding to dimer–dimer nonbonding to bonding transitions. After such transition, the tubes become much more thermally stable and undergo semiconductor–metal transitions under increasing strain. The band gaps of PGNTs are not sensitive to chirality whereas they can be tuned effectively from visible to short-wavelength infrared by appropriate strain, making them appealing materials for flexible nano-optoelectronics. In conclusion, these findings provide useful insight into unusual phase transitions in low-dimensional systems.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Analysis of defects in In 2 O 3 :H synthesized in presence of water vapor and hydrogen gas mixture

Using hybrid functional-based density functional theory calculations, we analyze the structure and kinetics of defects formed in two competing synthesis routes to prepare hydrogen-doped In 2 O 3 films, using a hydrogen and oxygen gas mixture vs synthesis in the presence of water vapor. For both of these synthesis routes, we find that H + is the dominant defect species: when the Fermi level is close to the conduction band, H + has a lower formation energy than other intrinsic or extrinsic defects. Our results also suggest that water molecules spontaneously split into H + (which occupies octahedral voids) and OH – interstitials (which occupies vacant oxygen lattice sites or oxygen vacancies). From the analysis of the binding energies between these different defects, we conclude that these defects do not cluster and are most likely to stay spatially distributed throughout the films. In addition, the sum of formation energies of an oxygen (i.e., O$^{2–}_i$) and a H + interstitial is close to the formation energy of a OH – interstitial, meaning that water molecules are completely split into 2H + and O$^{2–}_i$ at the synthesis conditions. Further, in the presence of H 2 + O 2 gas mixture, oxygen interstitials occupy oxygen vacancies while hydrogen interstitials occupy vacant oxygen lattice sites and form bonds with lattice oxygens. Our analysis of the defect equilibria suggests that the hydrogen content in films synthesized in the presence of water vapor is higher than films synthesized in the presence of a hydrogen gas mixture. At high dopant concentrations, a hydrogen bond network is formed in the system and this leads to large distortions in the lattice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Establishing defect-property relationships for 2D-nanomaterials (Final technical report)

Studies of new families of two-dimensional nanomaterials (2DNMs) have established that they possess unique properties that diverge from those of their bulk counterparts. This project aimed to determine how tolerant 2DNMs are to extreme photon and particle fluxes and to identify the mechanisms governing their radiation response. Early work indicated that graphene is not as representative of other 2DNMs as previously assumed; however, the origin of this difference remained unclear. To address these knowledge gaps, this project investigated the physical processes occurring at multiple length scales in transition metal dichalcogenides (TMDs) and quantified their structural stability and property evolution under far-from-equilibrium conditions. In-situ and ex-situ ion and electron irradiations were performed to directly control and monitor defect formation in TMDs. Complementary density functional theory (DFT) and molecular dynamics (MD) simulations were employed to elucidate the mechanisms of defect generation and evolution. The outcomes of this work established mechanistic understanding of irradiation-induced defect formation in 2DNMs, quantified the radiation tolerance of TMDs, and built a fundamental knowledge base for correlating defect structures with material properties. Collectively, these results provide new insights into the stability of low-dimensional materials in extreme environments and enable the predictive design of radiation-tolerant 2DNMs.

2D materials↗
DOE OSTI2017

Effects of defects and dephasing on charge and spin currents in two-dimensional topological insulators

Using the nonequilibrium Keldysh Green's function formalism, we investigate the effect of defects on the electronic structure and transport properties of two-dimensional topological insulators (TI). We demonstrate how the spatial flow of charge changes between the topologically protected edge and bulk states and show that elastically and inelastically scattering defects that preserve the time-reversal symmetry of the TI lead to qualitatively different effects on the TI's local electronic structure and its transport properties. Moreover, we show that the recently predicted ability to create highly spin-polarized currents by breaking the time-reversal symmetry of the TI via magnetic defects [J. S. Van Dyke and D. K. Morr, Phys. Rev. B 93, 081401 (2016)] is robust against the inclusion of a Rashba spin-orbit interaction and the effects of dephasing, and remains unaffected by changes over a wide range of the TI's parameters. We discuss how the sign of the induced spin currents changes under symmetry operations, such as reversal of bias and gate voltages, or spatial reflections. Finally, we show that the insight into the interplay between topology and symmetry of the magnetic defects can be employed for the creation of intriguing quantum phenomena, such as highly localized magnetic fields inside the TI.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Electrical and structural characterizations of crystallized Al{sub 2}O{sub 3}/GaN interfaces formed by in situ metalorganic chemical vapor deposition

Al{sub 2}O{sub 3} films were grown in situ by metalorganic chemical vapor deposition at 900 °C on GaN of both Ga- and N-face polarities. High-resolution transmission electron microscopy revealed that the Al{sub 2}O{sub 3} films were crystalline and primarily γ-phase. The Al{sub 2}O{sub 3}/Ga-GaN and Al{sub 2}O{sub 3}/N-GaN interfaces were both atomically sharp, and the latter further exhibited a biatomic step feature. The corresponding current-voltage (J-V) characteristics were measured on a metal-Al{sub 2}O{sub 3}-semiconductor capacitor (MOSCAP) structure. The leakage current was very high when the Al{sub 2}O{sub 3} thickness was comparable with the size of the crystalline defects, but was suppressed to the order of 1 × 10{sup −8} A/cm{sup 2} with larger Al{sub 2}O{sub 3} thicknesses. The interface states densities (D{sub it}) were measured on the same MOSCAPs by using combined ultraviolet (UV)-assisted capacitance-voltage (C-V), constant capacitance deep level transient spectroscopy (CC-DLTS), and constant capacitance deep level optical spectroscopy (CC-DLOS) techniques. The average D{sub it} measured by CC-DLTS and CC-DLOS were 6.6 × 10{sup 12} and 8.8 × 10{sup 12} cm{sup −2} eV{sup −1} for Al{sub 2}O{sub 3}/Ga-GaN and 8.6 × 10{sup 12} and 8.6 × 10{sup 12 }cm{sup −2} eV{sup −1} for Al{sub 2}O{sub 3}/N-GaN, respectively. The possible origins of the positive (negative) polarization compensation charges in Al{sub 2}O{sub 3}/Ga-GaN (Al{sub 2}O{sub 3}/N-GaN), including the filling of interface states and the existence of structure defects and impurities in the Al{sub 2}O{sub 3} layer, were discussed in accordance with the experimental results and relevant studies in the literature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Dislocation-Assisted Quasi-Two-Dimensional Semiconducting Nanochannels Embedded in Perovskite Thin Films

Defect engineering in perovskite thin films has attracted extensive attention recently due to the films’ atomic-scale modification, allowing for remarkable flexibility to design novel nanostructures for next generation nanodevices. However, the defect-assisted three-dimensional nanostructures in thin film matrices usually has large misfit strain and thus causes unstable thin film structures. In contrast, defect-assisted one- or two-dimensional nanostructures embedded in thin films can sustain large misfit strains without relaxation, which make them suitable for defect engineering in perovskite thin films. Here, we reported the fabrication and characterization of edge-type misfit dislocation-assisted two-dimensional BiMnO x nanochannels embedded in SrTiO 3 /La 0.7 Sr 0.3 MnO 3 /TbScO 3 perovskite thin films. The nanochannels are epitaxially grown from the surrounding films without noticeable misfit strain. Diode-like current rectification was spatially observed at nanochannels due to the formation of Schottky junctions between BiMnO x nanochannels and conducting La 0.7 Sr 0.3 MnO 3 thin films. Such atomically scaled heterostructures constitute more flexible ultimate functional units for nanoscale electronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

Luminescence of impurity Ce{sup 3+} centers in KH{sub 2}PO{sub 4} : Ce crystals

The photoluminescence, X-ray luminescence, and cathodoluminescence spectra of KH{sub 2}PO{sub 4} : Ce single crystals contain a nonelementary band of radiation with an energy of 3.55 eV and decay time of 27–33 ns. It is formed by fast radiative interconfiguration d → f transitions between the excited and ground states of Ce{sup 3+} ions, with the ground state is split by a crystalline field. In the range of concentrations studied (0.5–3 × 10{sup –2} wt %), Ce3+ ions enter the KH{sub 2}PO{sub 4} : Ce crystal lattice as substitution ions. Local charge compensation takes place by means of defects in the crystal structure that cause luminescence with a large Stokes shift in the region of 2.4–2.2 eV. The presence of hydrogen sublattice defects decreases the efficiency of energy transport by free charge carriers to the luminescent centers. The interaction of defects and impurity centers manifests itself as a slow inertial building-up of the stationary X-ray luminescence yield of Ce{sup 3+} centers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗