SEARCH · Search NASA

Results for “structural reliability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Magnetograph response to canopy-type fields

The response of longitudinal-field magnetographs to magnetic fields which are semi-infinite or confined to a horizontal layer is discussed with respect to the interpretation of solar diffuse fields, observed towards the limb, in terms of magnetic canopy models. Numerical results are presented for several reference solar models and typical 'calibration' curves are shown for the CI 9111 A, Fe I 8688 A, and Ca II 8542 A lines in magnetostatic atmospheres derived from a mean model. A procedure is developed for determining the base heights of magnetic canopies from observations with an uncertainty not exceeding the order of a pressure scale height. Until definitive information regarding atmospheric structure inside flux tubes can be developed from theory or observation, reliable field strengths cannot be derived from the data.

Jones, H. P.↗

NASA NTRS1985

Curved Finite Elements and Curve Approximation

The approximation of parameterized curves by segments of parabolas that pass through the endpoints of each curve segment arises naturally in all quadratic isoparametric transformations. While not as popular as cubics in curve design problems, the use of parabolas allows the introduction of a geometric measure of the discrepancy between given and approximating curves. The free parameters of the parabola may be used to optimize the fit, and constraints that prevent overspill and curve degeneracy are introduced. This leads to a constrained optimization problem in two varibles that can be solved quickly and reliably by a simple method that takes advantage of the special structure of the problem. For applications in the field of computer-aided design, the given curves are often cubic polynomials, and the coefficient may be calculated in closed form in terms of polynomial coefficients by using a symbolic machine language so that families of curves can be approximated with no further integration. For general curves, numerical quadrature may be used, as in the implementation where the Romberg quadrature is applied. The coefficient functions C sub 1 (gamma) and C sub 2 (gamma) are expanded as polynomials in gamma, so that for given A(s) and B(s) the integrations need only be done once. The method was used to find optimal constrained parabolic approximation to a wide variety of given curves.

Baart, M. L.↗

NASA NTRS1985

Ultrareliable, fault-tolerant control systems: A conceptual description

An Ultrareliable, Fault-Tolerant, Control-System (UFTCS) concept is described using a systems design philosophy which allows development of system structures containing virtually no common elements. Common elements limit achievable system reliability and can cause catastrophic loss of fault-tolerant system function. The UFTCS concept provides the means for removing common system elements by permitting the elements of the system to operate as independent, uncoupled entities. Multiple versions of the application program are run on dissimilar hardware. Fault tolerance is achieved through the use of static redundancy management.

Webster, L. D.↗

NASA NTRS1988

Reduced order models for nonlinear aerodynamics

Reduced order models are needed for reliable, efficient and accurate prediction of aerodynamic forces to analyze fluid structure interaction problems in turbomachinery, including propfans. Here, a finite difference, time marching Navier-Stokes code is validated for unsteady airfoil motion by comparing results with those from classical potential flow. The Navier-Stokes code is then analyzed for calculation of primitive and exact estimates of eigenvalues and eigenvectors associated with fluid-airfoil interaction. A variational formulation for the Euler equations and Navier-Stokes equations will be the basis for reduction of order through an eigenvector transformation.

Mahajan, Aparajit J.↗

NASA NTRS1990

Computational technology for flight vehicles; Proceedings of the Symposium, Washington, DC, Nov. 5-7, 1990

Recent advances in computational fluid mechanics are discussed in reviews and reports. Sections are devoted to (1) the modeling of local phenomena and edge effects in solids, (2) stochastic modeling and simulation of fracture toughness, and (3) partitioning strategy and new finite elements. Particular attention is given to global and local finite-element/spectral-boundary-element techniques for failure analysis, simulations of microfracture in metal-matrix composites, fatigue analysis of cracked anisotropic plates under stochastic loading, mathematical modeling for the analysis of nonlinear aircraft dynamics, physical and mathematical modeling of wave propagation in the Ariane 5 VEB structure, partitioning based on symmetry transformations, an FEM approach to adaptive reliability assurance, and time-domain FEMs for the large rotational dynamics of multibody systems.

Noor, Ahmed K.↗

NASA NTRS1991

Determination of Rotordynamic Coefficients for Labyrinth Seals and Application to Rotordynamic Design Calculations

In today's rotordynamic calculations, the input parameters for a finite element analysis (FEA) determine very much the reliability of eigenvalue and eigenmode predictions. While modeling of an elastic structure by means of beam elements etc. is relatively straightforward to perform and the input data for journal bearings are usually known exactly enough, the determination of stiffness and damping for labyrinth seals is still the subject of many investigations. Therefore, the rotordynamic influence of labyrinths is often not included in FEA for rotating machinery because of a lack of computer programs to calculate these parameters. This circumstance can give rise to severe vibration problems especially for high performance turbines or compressors, resulting in remarkable economic losses. The forces generated in labyrinths can be described for small motions around the seal center with a linearized force-motion relationship. Several years ago, we started with the development of computer codes for the determination of rotordynamic seal coefficients. Our different approaches to evaluate the dynamic fluid forces generated by turbulent, compressible seal flow are introduced.

Weiser, P.↗

NASA NTRS1994

Space flight risk data collection and analysis project: Risk and reliability database

The focus of the NASA 'Space Flight Risk Data Collection and Analysis' project was to acquire and evaluate space flight data with the express purpose of establishing a database containing measurements of specific risk assessment - reliability - availability - maintainability - supportability (RRAMS) parameters. The developed comprehensive RRAMS database will support the performance of future NASA and aerospace industry risk and reliability studies. One of the primary goals has been to acquire unprocessed information relating to the reliability and availability of launch vehicles and the subsystems and components thereof from the 45th Space Wing (formerly Eastern Space and Missile Command -ESMC) at Patrick Air Force Base. After evaluating and analyzing this information, it was encoded in terms of parameters pertinent to ascertaining reliability and availability statistics, and then assembled into an appropriate database structure.

Source record↗

NASA NTRS1995

Improved Selection Of Structural-Load Safety Factors

More rational approach offers potential for optimization of design. Improvement in deterministic method of selection of structural-load safety factors makes possible to design structures more nearly optimum with respect to competing demands for both reliability and attributes detracting from reliability (principally lighter weight, smaller size, and lower cost).

Verderaime, Vincent↗

NASA NTRS1998

Thermomechanical Postbuckling of Shells

A number of issues involving the postbuckling of doubly-curved panels exposed to a non-uniform temperature field and subjected to a system of mechanical loads are considered in this paper. Effects played by transverse shear, initial geometric imperfections, membrane and thickness-wise temperature gradient, tangential edge constraints, linear/non-linear elastic foundation are incorporated and their implications on the non-linear response behavior of shells are discussed. Issues related with the delay of the occurrence of the snap-through buckling, alleviation of its intensity and even with its removal are addressed and remarks on conditions rendering a curved panel insensitive to initial geometric imperfections are included. Results on small vibration of shells about sub- and post-critical ranges are provided and structural modeling issues playing a non-negligible role towards a reliable prediction of the postbuckling behavior of shells under complex loading conditions are discussed. Results on non-linear response of flat reinforced panels subjected to thermomechanical loads are also presented. Finally, problems not covered by this article are briefly indicated.

Librescu, Liviu↗

NASA NTRS1998

Sliding Mode Thermal Control System for Space Station Furnace Facility

The decoupled control of the nonlinear, multiinput-multioutput, and highly coupled space station furnace facility (SSFF) thermal control system is addressed. Sliding mode control theory, a subset of variable-structure control theory, is employed to increase the performance, robustness, and reliability of the SSFF's currently designed control system. This paper presents the nonlinear thermal control system description and develops the sliding mode controllers that cause the interconnected subsystems to operate in their local sliding modes, resulting in control system invariance to plant uncertainties and external and interaction disturbances. The desired decoupled flow-rate tracking is achieved by optimization of the local linear sliding mode equations. The controllers are implemented digitally and extensive simulation results are presented to show the flow-rate tracking robustness and invariance to plant uncertainties, nonlinearities, external disturbances, and variations of the system pressure supplied to the controlled subsystems.

Jackson Mark E.↗

NASA NTRS2001

Comparison of the Experimental Performance of Ferroelectric CPW Circuits with Method of Moment Simulations and Conformal Mapping

Experimental measurements of coplanar waveguide (CPW) circuits atop thin films of ferroelectric Ba(x)Sr(1-x)TiO3 (BST) were made as a function bias from 0 to 200 V and frequency from 0.045 to 20 GHz. The resulting phase shifts are compared with method of moments electromagnetic simulations and a conformal mapping analysis to determine the dielectric constant of the BST films. Based on the correlation between the experimental and the modeled data, an analysis of the extent to which the electromagnetic simulators provide reliable values for the dielectric constant of the ferroelectric in these structures has been performed. In addition, to determine how well the modeled data compare with experimental data, the dielectric constant values were also compared to low frequency measurements of interdigitated capacitor circuits on the same films. Results of these comparisons will be presented.

VanKeuls, Fred W.↗

NASA NTRS2002

An Approach to Risk-Based Design Incorporating Damage Tolerance Analyses

Incorporating risk-based design as an integral part of spacecraft development is becoming more and more common. Assessment of uncertainties associated with design parameters and environmental aspects such as loading provides increased knowledge of the design and its performance. Results of such studies can contribute to mitigating risk through a system-level assessment. Understanding the risk of an event occurring, the probability of its occurrence, and the consequences of its occurrence can lead to robust, reliable designs. This paper describes an approach to risk-based structural design incorporating damage-tolerance analysis. The application of this approach to a candidate Earth-entry vehicle is described. The emphasis of the paper is on describing an approach for establishing damage-tolerant structural response inputs to a system-level probabilistic risk assessment.

Knight, Norman F., Jr.↗

NASA NTRS2012

Systematic Sensor Selection Strategy (S4) User Guide

This paper describes a User Guide for the Systematic Sensor Selection Strategy (S4). S4 was developed to optimally select a sensor suite from a larger pool of candidate sensors based on their performance in a diagnostic system. For aerospace systems, selecting the proper sensors is important for ensuring adequate measurement coverage to satisfy operational, maintenance, performance, and system diagnostic criteria. S4 optimizes the selection of sensors based on the system fault diagnostic approach while taking conflicting objectives such as cost, weight and reliability into consideration. S4 can be described as a general architecture structured to accommodate application-specific components and requirements. It performs combinational optimization with a user defined merit or cost function to identify optimum or near-optimum sensor suite solutions. The S4 User Guide describes the sensor selection procedure and presents an example problem using an open source turbofan engine simulation to demonstrate its application.

Sowers, T. Shane↗

NASA NTRS2015

3D-Laser-Scanning Technique Applied to Bulk Density Measurements of Apollo Lunar Samples

In order to better interpret gravimetric data from orbiters such as GRAIL and LRO to understand the subsurface composition and structure of the lunar crust, it is import to have a reliable database of the density and porosity of lunar materials. To this end, we have been surveying these physical properties in both lunar meteorites and Apollo lunar samples. To measure porosity, both grain density and bulk density are required. For bulk density, our group has historically utilized sub-mm bead immersion techniques extensively, though several factors have made this technique problematic for our work with Apollo samples. Samples allocated for measurement are often smaller than optimal for the technique, leading to large error bars. Also, for some samples we were required to use pure alumina beads instead of our usual glass beads. The alumina beads were subject to undesirable static effects, producing unreliable results. Other investigators have tested the use of 3d laser scanners on meteorites for measuring bulk volumes. Early work, though promising, was plagued with difficulties including poor response on dark or reflective surfaces, difficulty reproducing sharp edges, and large processing time for producing shape models. Due to progress in technology, however, laser scanners have improved considerably in recent years. We tested this technique on 27 lunar samples in the Apollo collection using a scanner at NASA Johnson Space Center. We found it to be reliable and more precise than beads, with the added benefit that it involves no direct contact with the sample, enabling the study of particularly friable samples for which bead immersion is not possible

Macke, R. J.↗

NASA NTRS2018

Polarimetric Remote Sensing of Atmospheric Aerosols: Instruments, Methodologies, Results, and Perspectives

Polarimetry is one of the most promising types of remote sensing for improved characterization of atmospheric aerosol. Indeed, aerosol particles constitute a highly variable atmospheric component characterized by a large number of parameters describing particle sizes, morphologies (including shape and internal structure), absorption and scattering properties, amounts, horizontal and vertical distribution, etc. Reliable monitoring of all these parameters is very challenging, and therefore the aerosol effects on climate and environment are considered to be among the most uncertain factors in climate and environmental research. In this regard, observations that provide both the angular distribution of the scattered atmospheric radiation as well as its polarization state at multiple wavelengths covering the UV–SWIR spectral range carry substantial implicit information on the atmospheric composition. Therefore, high expectations in improving aerosol characterization are associated with detailed passive photopolarimetric observations. The critical need to use space-borne polarimetry for global accurate monitoring of detailed aerosol properties was first articulated in the late 1980s and early 1990s. By now, several orbital instruments have already provided polarization observations from space, and a number of advanced missions are scheduled for launch in the coming years by international and national space agencies. The first and most extensive record of polarimetric imagery was provided by POLDER-I, POLDER-II, and POLDER/PARASOL multi-angle multi-spectral polarization sensors. Polarimetric observations with the POLDER-like design intended for collecting extensive multi-angular multi-spectral measurements will be provided by several instruments, such as the MAI/TG-2, CAPI/TanSat, and DPC/GF-5 sensors recently launched by the Chinese Space Agency. Instruments such as the 3MI/MetOp-SG, MAIA, SpexOne and HARP2 on PACE, POSP, SMAC, PCF, DPC–Lidar, ScanPol and MSIP/Aerosol-UA, MAP/Copernicus CO2 Monitoring, etc. are planned to be launched by different space agencies in the coming decade. The concepts of these future instruments, their technical designs, and the accompanying algorithm development have been tested intensively and analyzed using diverse airborne prototypes. Certain polarimetric capabilities have also been implemented in such satellite sensors as GOME-2/MetOp and SGLI/GCOM-C.

Aerosols↗

NASA NTRS2019

Ground Vibration Testing at NASA Armstrong, Emphasizing on Passive Aeroelastic Tailored Wing Ground Vibration Test Using Fixed Base Correction Method

How does experimental mechanics contribute to aircraft aeroelastic airworthiness? The aviation community is always improving analysis and testing techniques to realize quicker, cheaper, reliable solutions. A ground vibration test (GVT) is conducted to identify structural mode shapes, frequencies, and damping values to validate analytical models used for flutter analysis, which shows whether a structure has acceptable aeroelastic flutter margins for airworthiness. The FLL recently conducted a GVT of the Passive Aeroelastic Tailored (PAT) Wing using an experimental modal technique called Fixed Base Correction (FBC). The GVT objective was to obtain the PAT wing modal characteristics to compare test results with finite element model (FEM) results for the tow-steered wingbox.

loads testing↗

NASA NTRS2022

Remote sensing-based vegetation and soil moisture constraints reduce irrigation estimation uncertainty

Understanding the human water footprint and its impact on the hydrological cycle is essential to inform water management under climate change. Despite efforts in estimating irrigation water withdrawals in earth system models, uncertainties and discrepancies exist within and across modeling systems conditioned by model structure, irrigation parameterization, and the choice of input datasets. Achieving model reliability could be much more challenging for data-sparse regions, given limited access to ground truth for parameterization and validation. Here, we demonstrate the potential of utilizing remotely sensed vegetation and soil moisture observations in constraining irrigation estimation in the Noah-MP land surface model. Results indicate that the two constraints together can effectively reduce model sensitivity to the choice of irrigation parameterization by 7%–43%. It also improves the characterization of the spatial patterns of irrigation and its impact on evapotranspiration and surface soil moisture by correcting for vegetation conditions and irrigation timing. This study highlights the importance of utilizing remotely sensed soil moisture and vegetation measurements in detecting irrigation signals and correcting for vegetation growth. Integrating the two remote sensing datasets into the model provides an effective and less feature engineered approach to constraining the uncertainty of irrigation modeling. Such strategies can be potentially transferred to other modeling systems and applied to regions across the globe.

Wanshu Nie↗

DOE OSTI2020

Hard x-ray standing-wave photoemission study of the interfaces in a BiFeO$_3$/La$_{0.7}$Sr$_{0.3}$MnO$_3$ superlattice

Hybrid multiferroics such as BiFeO$_3$ (BFO) and La$_{0.7}$Sr$_{0.3}$MnO$_3$ (LSMO) heterostructures are highly interesting functional systems due to their complex electronic and magnetic properties. One of the key parameters influencing the emergent properties is the quality of interfaces, where varying interdiffusion lengths can give rise to different chemistry and distinctive electronic states. Here we report high-resolution depth resolved chemical and electronic investigation of BFO/LSMO superlattice using standing-wave hard X-ray photoemission spectroscopy in the first-order Bragg as well as near-total-reflection geometry. Our results show that the interfaces of BFO on top of LSMO are atomically abrupt, while the LSMO on top of BFO interfaces show an interdiffusion length of around 1.2 unit cells. The two interfaces also exhibit different chemical gradients, with the BFO/LSMO interface being Sr-terminated by a spectroscopically distinctive high binding energy component in Sr 2p core-level spectra, which is spatially contained within 1 unit cell from the interface. From the electronic point of view, unique valence band features were observed for bulk-BFO, bulk-LSMO and their interfaces. Our X-ray optical analysis revealed a unique electronic signature at the BFO/LSMO interface, which we attribute to the coupling between those respective layers. Valence band decomposition based on the Bragg-reflection standing-wave measurement also revealed the band alignment between BFO and LSMO layers. Our work demonstrates that standing-wave hard x-ray photoemission is a reliable non-destructive technique for probing depth-resolved electronic structure of buried layers and interfaces with sub-unit-cell resolution. Equivalent investigations can be successfully applied to a broad class of material such as perovskite complex oxides with emergent interfacial phenomena.

Martins, HP↗