Search NASA⌕ Search

SEARCH · Search NASA

Results for “test correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Study on the mechanism of diametral cladding strain and mixed-oxide fuel element breaching in slow-ramp extended overpower transients

Cladding strain caused by fuel/cladding mechanical interaction (FCMI) was evaluated for mixed-oxide fuel elements subjected to 70–90% slow-ramp extended overpower transient tests in the experimental breeder reactor II. Calculated transient-induced cladding strains were correlated with cumulative damage fractions (CDFs) using cladding strength correlations. In a breached high-smeared density solid fuel element with low strength cladding, cladding thermal creep strain was significantly increased to approximately half the transient-induced cladding strain that was considered to be caused by the tertiary creep when the CDF was close to the breach criterion (=1.0), with the remaining strain due to instantaneous plastic deformation. In low-smeared density annular fuel elements, FCMI load was significantly mitigated and resulted in little cladding strain. The CDFs of the annular fuel elements were lower than 0.01 at the end of the overpower transient, indicating a substantial margin to breach. A substantial margin to breach was also maintained in a high-smeared density fuel element with high strength cladding.

99 GENERAL AND MISCELLANEOUS↗

Bending testing and characterization of surrogate nuclear fuel rods made of Zircaloy-4 cladding and aluminum oxide pellets

We studied behavior of surrogate nuclear fuel rods made of Zircaloy-4 (Zry-4) cladding with alumina pellets under reversed cyclic bending. Tests were performed under load or moment control at 5 Hz, and an empirical correlation was established between rod fatigue life and amplitude of the applied moment. Fatigue response of Zry-4 cladding was further characterized by using flexural rigidity. Degradation of flexural rigidity was shown to depend on the moment applied and the prefatigue condition of specimens. Pellet-to-pellet interface (PPI), pellet-to-cladding interface (PCI), and pellet condition all affect surrogate rod failure. Bonding/debonding of PPI/PCI and pellet fracturing contribute to surrogate rod bending fatigue. Also, the effect of sensor spacing on curvature measurement using three-point deflections was studied; the method based on effective specimen gauge length is effective in sensor spacing correction. Finally, we developed the database and gained understanding in this study such that it will serve as input to analysis of SNF vibration integrity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Application of electroretinography (ERG) in early drug development for assessing retinal toxicity in rats

Retinal ocular toxicity is among the leading causes of drug development attrition in the pharmaceutical industry. Electroretinography (ERG) is a non-invasive functional assay used to assess neuro-retinal physiological integrity by measuring the electrical responses. To directly assess the utility of ERG, a series of studies was conducted following intravitreal and/or iv administration of pan-cyclin-dependent kinase inhibitors: AG-012,986 and AG-024,322 in rats. Both compounds have previously shown to induce retinal toxicity. Retinal injury was evaluated by ERG, histopathology and TUNEL staining. Intravitreal injection of AG-012,986 at ≥ 10 μg/eye resulted in decreases (60%) in ERG b-wave and microscopic changes of mild to moderate retinal degeneration, and at 30 μg/eye led to additional ophthalmic findings. Intravenous administration of AG-012,986 daily at ≥ 5 mg/kg resulted in dose-related decreases (25 to 40%) in b-wave and sporadic to intense positive TUNEL staining. Intravitreal injection of AG-024,322 at 30 μg/eye also resulted in decreases (50 to 60%) in b-wave, mild to marked retinal degeneration and mild vitreous debris. These experiments demonstrate that ERG can be used as a sensitive and reliable functional tool to evaluate retinal toxicity induced by test compounds in rats complementing other classical ocular safety measurements. - Highlights: • There were strong correlations of ERG readouts to in vivo ophthalmic exams, TUNEL assay, and histopathology. • ERG appears to be more sensitive and can detect retinal functional changes at a very early stage of pathogenesis. • ERG can be incorporated into routine exploratory toxicity study to identify compound ocular safety issues. • In drug discovery, ERG is a quick, non-invasive, sensitive and reliable tool in retinal toxicity de-risking.

60 APPLIED LIFE SCIENCES↗

Optimizing disk registration algorithms for nanobeam electron diffraction strain mapping

Scanning nanobeam electron diffraction strain mapping is a technique by which the positions of diffracted disks sampled at the nanoscale over a crystalline sample can be used to reconstruct a strain map over a large area. However, it is important that the disk positions are measured accurately, as their positions relative to a reference are directly used to calculate strain. Here in this study, we compare several correlation methods using both simulated and experimental data in order to directly probe susceptibility to measurement error due to non-uniform diffracted disk illumination structure. We found that prefiltering the diffraction patterns with a Sobel filter before performing cross correlation or performing a square-root magnitude weighted phase correlation returned the best results when inner disk structure was present. Lastly, we have tested these methods both on simulated datasets, and experimental data from unstrained silicon as well as a twin grain boundary in 304 stainless steel.

36 MATERIALS SCIENCE↗

Electrocatalytic Hydrogenation of Oxygenated Compounds in Aqueous Phase

Electrocatalytic hydrogenation is a fascinating strategy to hydrogenate biogenic compounds at ambient conditions by replacing the thermal and H2 inputs by cathodic potential. This work compares the performance of this approach (in aqueous phase at room temperature) for a variety of model oxygenated compounds reacted over a series of metals. The target functionalities were carbonyl groups, aromatic rings, and ether bonds. All metals explored (Pt, Rh, Pd, Cu) are active for the reduction of carbonyl compounds to alcohols. For instance, conversion rates of benzaldehyde increased as a function of metal as: Pt < Rh < Pd (Cu was tested at different conditions). In contrast, only Rh and Pt were found active for hydrogenation of aromatic rings (Rh was more active than Pt). Comparing among the target functionalities, carbonyl groups are more reactive than aromatic rings and ether bonds in phenolic compounds and di-aryl ethers on all explore metals. This carbonyl reactivity, however, is enabled by the aromaticity of the molecule. Hence, the reactivity trend of the examined molecules is: butyraldehyde < furfural < acetophenone < benzaldehyde. For phenolic compounds, phenol is more reactive than cresol and methoxy phenol. Thus, the presence of substituting groups at the functionality being converted (either carbonyl or aromatic ring) decreases conversion rates. Ether bonds are cleaved under electrocatalytic conditions, which opens two main pathways for the conversion of aryl ethers: hydrogenation of the aromatic ring and hydrogenolysis of the ether bonds, whereas hydrolysis occurs as a minor pathway. Electrocatalytic hydrogenation competes with the H2 evolution reaction at the conditions of the tests, therefore Faradaic efficiency (fraction of current utilized in hydrogenation) and hydrogenation rates are correlated. That is, within the potential range explored, increasing hydrogenation rates lead to higher Faradaic efficiencies. The slope of this correlation, however, depends on the potential and on the functionality being hydrogenated. Keywords: Hydrogenation, electrocatalysis, metal catalysis, aqueous phase hydrogenation, biomass conversion. Acknowledgements The authors would like to thank Yang Song, Prof. Johannes Lercher, and the group of Prof. Hubert A. Gasteiger at the Technische Universität München for advice and support. The authors are grateful to Donald M. Camaioni, Nirala Singh, and Juan Herranz for fruitful discussions. The research described in this paper is part of the Chemical Transformation Initiative at Pacific Northwest National Laboratory (PNNL), conducted under the Laboratory Directed Research and Development Program at PNNL, a multi-program national laboratory operated by Battelle for the U.S. Department of Energy.

Hydrogenation, electrocatalysis, metal catalysis, ↗

Insights Into Seismicity Associated With Flexibly Operating Enhanced Geothermal System From Real‐Time Distributed Acoustic Sensing

Enhanced Geothermal Systems (EGS) have the capacity to broaden the accessible resource pool for geothermal power generation. Traditionally viewed as a “baseload” resource, their flexible operation might also enable dispatchable load‐following generation and long‐term energy storage, aligning them with the evolving landscape of decarbonized electricity systems. However, increasing permeability and extracting energy during EGS operations can induce microseismic events; for many prior EGS efforts, some associated seismicity has been observed. While energetically beneficial, the flexibility of EGS operations prompts our inquiry into whether new types of operations will yield previously unseen seismicity patterns. We demonstrate the use of distributed acoustic sensing (DAS) with real‐time edge computing to monitor seismicity during a pilot test of a cyclically operated EGS facility at the Blue Mountain geothermal field. Our focus lies in uncovering seismicity insights from the real‐time microseismic catalog, particularly during load‐following dispatchability tests simulating flexible EGS operation. Here, we find that variations in pore pressure consistently correlate with seismicity, and that controlling pressure cycles during flexible operations appears to constrain microseismic activity during subsequent cycles. The spatio‐temporal evolution of microseismic clouds recorded during cyclic injection cycles fits diffusive models over our available observation period. Additionally, seismicity elevation lags behind pore pressure increases, likely due to pressure diffusion to the fracture system boundary. Through real‐time monitoring, we offer novel insights into seismicity associated with flexibly operating EGS. Our findings suggest that leveraging DAS and edge computing can inform EGS operations and help mitigate induced seismicity.

Chamarczuk, Michal [Rice Univ., Houston, TX (Unite↗

Performance of a nonempirical density functional on molecules and hydrogen-bonded complexes

Recently, Tao and Mo derived a meta-generalized gradient approximation functional based on a model exchange-correlation hole. In this work, the performance of this functional is assessed on standard test sets, using the 6-311++G( 3df,3pd ) basis set. These test sets include 223 G3/99 enthalpies of formation, 99 atomization energies, 76 barrier heights, 58 electron affinities, 8 proton affinities, 96 bond lengths, 82 harmonic vibrational frequencies, 10 hydrogen-bonded molecular complexes, and 22 atomic excitation energies. Here our calculations show that the Tao-Mo functional can achieve high accuracy for most properties considered, relative to the local spin-density approximation, Perdew-Burke-Ernzerhof, and Tao-Perdew-Staroverov-Scuseria functionals. In particular, it yields the best accuracy for proton affinities, harmonic vibrational frequencies, hydrogen-bond dissociation energies and bond lengths, and atomic excitation energies.

74 ATOMIC AND MOLECULAR PHYSICS↗

LOCAL GROUP DWARF SPHEROIDALS: CORRELATED DEVIATIONS FROM THE BARYONIC TULLY-FISHER RELATION

Local Group dwarf spheroidal satellite galaxies are the faintest extragalactic stellar systems known. We examine recent data for these objects in the plane of the Baryonic Tully-Fisher Relation (BTFR). While some dwarf spheroidals adhere to the BTFR, others deviate substantially. We examine the residuals from the BTFR and find that they are not random. The residuals correlate with luminosity, size, metallicity, ellipticity, and susceptibility of the dwarfs to tidal disruption in the sense that fainter, more elliptical, and tidally more susceptible dwarfs deviate farther from the BTFR. These correlations disfavor stochastic processes and suggest a role for tidal effects. We identify a test to distinguish between {Lambda}CDM and MOND based on the orbits of the dwarf satellites of the Milky Way and how stars are lost from them.

79 ASTRONOMY AND ASTROPHYSICS↗

Measuring the Kerr spin parameter of a non-Kerr compact object with the continuum-fitting and the iron line methods

Under the assumption that astrophysical black hole candidates are the Kerr black holes of general relativity, the continuum-fitting method and the analysis of the Kα iron line are today the only available techniques capable of providing a relatively reliable estimate of the spin parameter of these objects. If we relax the Kerr black hole hypothesis and we try to test the nature of black hole candidates, we find that there is a strong correlation between the measurement of the spin and possible deviations from the Kerr solution. The properties of the radiation emitted in a Kerr spacetime with spin parameter a{sub *} are indeed very similar, and practically indistinguishable, from the ones of the radiation emitted around a non-Kerr object with different spin. In this paper, I address the question whether measuring the Kerr spin with both the continuum-fitting method and the Kα iron line analysis of the same object can be used to claim the Kerr nature of the black hole candidate in the case of consistent results. In this work, I consider two non-Kerr metrics and it seems that the answer does depend on the specific background. The two techniques may either provide a very similar result (the case of the Bardeen metric) or show a discrepancy (Johannsen-Psaltis background)

79 ASTRONOMY AND ASTROPHYSICS↗

Evaluation of data collection bias of third molar stages of mineralisation for age estimation in the living

Abstract Age assessment of the living is a fundamental procedure in the process of human identification, in order to guarantee fair treatment of individuals, which has ethical, civil, legal, and medical repercussions. The careful selection of the appropriate methods requires evaluation of several parameters: accuracy, precision of the method, as well as its reproducibility. The approach proposed by Mincer et al. adapted from Demirjian et al. exploring third molar mineralisation, is one of the most frequently considered for age estimation of the living. Thus, this work aims to assess potential bias in the data collection when applying the classification stages for dental mineralisation adapted by Mincer et al. A total of 102 orthopantomographs, of clinical origin, belonging to individuals aged between 12 and 25 years ($ \bar{\textit x} $ = 20.12 years, SD = 3.49 years; 65 females, 37 males, all of Portuguese nationality) were included and a retrospective analysis performed by five observers with different levels of experience (high, average, and basic). The performance and agreement between five observers were evaluated using Weighted Cohen’s Kappa and the Intraclass Correlation Coefficient. To access the influence of impaction on third molar classification, variables were tested using ordinal logistic regression Generalised Linear Model. It was observed that there were variations in the number of teeth identified among the observers, but the agreement levels ranged from moderate to substantial (0.4–0.8). Upon closer examination of the results, it was observed that although there were discernible differences between highly experienced observers and those with less experience, the gap was not as significant as initially hypothesised, and a greater disparity between the classifications of the upper (0.24–0.49) and lower third molars (>0.55) was observed. When bone superimposition is present, the classification process is not significantly influenced; however, variation in teeth angulation affects the assessment. The results suggest that with an efficient preparation, the level of experience as a factor can be overcome. Mincer and colleague's classification system can be replicated with ease and consistency, even though the classification of upper and lower third molars presents distinct challenges.

de Oliveira Santos, Inês (ORCID:0000000267324347)↗

The clustering of theSDSS-IV extended Baryon Oscillation Spectroscopic Survey DR14 quasar sample: measuring the anisotropic baryon acoustic oscillations with redshift weights

We present an anisotropic analysis of baryon acoustic oscillation (BAO) signal from the Sloan Digital Sky Survey IV extended Baryon Oscillation Spectroscopic Survey Data Release 14 quasar sample. The sample consists of 147 000 quasars distributed over a redshift range of 0.8 < z < 2.2. We apply the redshift weights technique to the clustering of quasars in this sample and achieve a 4.6 per cent measurement of the angular distance measurement DM at z = 2.2 and Hubble parameter H at z = 0.8. We parametrize the distance-redshift relation, relative to a fiducial model, as a Taylor series. The coefficients of this expansion are used to reconstruct the distance-redshift relation and obtain distance and Hubble parameter measurements at all redshifts within the redshift range of the sample. Reporting the result at two characteristic redshifts, we determine DM(z = 1) = 3405 ± 305 (rd/rd, fid) Mpc, H(z=1) = 120.7± 7.3 (r_d,fid / r_d) km s^{-1} Mpc^{-1} and DM(z = 2) = 5325 ± 249 (rd/rd, fid) Mpc, H(z=2) = 189.9± 32.9 (r_d,fid / r_d) km s^{-1} Mpc^{-1}. These measurements are highly correlated. We assess the outlook of BAO analysis from the final quasar sample by testing the method on a set of mocks that mimic the noise level in the final sample. We demonstrate on these mocks that redshift weighting shrinks the measurement error by over 25 per cent on average. We conclude redshift weighting can bring us closer to the cosmological goal of the final quasar sample.

79 ASTRONOMY AND ASTROPHYSICS↗

Quantum tensor network algorithms for evaluation of spectral functions on quantum computers

We investigate quantum algorithms derived from tensor networks to simulate the static and dynamic properties of quantum many-body systems. Using a sequentially prepared quantum circuit representation of a matrix product state (MPS) that we call a quantum tensor network (QTN), we demonstrate algorithms to prepare ground and excited states on a quantum computer and apply them to molecular nanomagnets (MNMs) as a paradigmatic example. In this setting, we develop two approaches for extracting the spectral correlation functions measured in neutron-scattering experiments: (a) a generalization of the SWAP test for computing wave function overlaps and, (b) a generalization of the notion of matrix product operators to the QTN setting which generates a linear combination of unitaries. The latter method is discussed in detail for translationally invariant spin-half systems, where it is shown to reduce the qubit resource requirements compared with the SWAP method and may be generalized to other systems. We demonstrate the versatility of our approaches by simulating spin-1/2 and spin-3/2 MNMs, with the latter being an experimentally relevant model of a Cr$^{3+}_{8}$ ring. Here, our approach has qubit requirements that are independent of the number of constituents of the many-body system and scale only logarithmically with the bond dimension of the MPS representation, making them appealing for implementation on near-term quantum hardware with mid-circuit measurement and reset.

Neutron scattering↗

Luttinger Liquid of Trimers in Fermi Gases with Unequal Masses

We investigate one dimensional attractive Fermi gases in spin-dependent optical lattices. We show that three-body bound states--'trimers'--exist as soon as the two tunneling rates are different. We calculate the binding energy and the effective mass of a single trimer. We then show numerically that for finite and commensurate densities n{sub a}rrow up=n{sub a}rrow down/2 an energy gap appears, implying that the gas is a one-component Luttinger liquid of trimers with suppressed superfluid correlations. The boundaries of this novel phase are given. We discuss experimental situations to test our predictions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multigluon Correlations and Evidence of Saturation from Dijet Measurements at an Electron-Ion Collider

In this work, we study inclusive and diffractive dijet production in electron-proton and electron-nucleus collisions within the color glass condensate effective field theory. We compute dijet cross sections differentially in both mean dijet transverse momentum P and recoil momentum Δ , as well as the anisotropy in the relative angle between P and Δ . Our results cover a much larger kinematic range than accessible in previous computations performed in the correlation limit approximation, where it is assumed that | P | &raquo | Δ | . We validate this approximation in its range of applicability and quantify its failure for | P | ≲ | Δ | . We also predict significant target-dependent deviations from the correlation limit approximation for | P | > | Δ | and | P | ≲ Q s , which offers a straightforward test of gluon saturation and access to multigluon distributions at a future Electron-Ion Collider.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Speeding Up the Dissipating Energy Flow Based Oscillation Source Detection

This paper enhances the Dissipating Energy Flow (DEF) method for forced oscillation source detection. The development focuses on improving the speed of the DEF method for oscillation source detection employed by ISO-NE. This is accomplished by using multi-signal modal estimation and statistical correlation to achieve robustness and detection accuracy. The effectiveness of the proposed method is tested on simulated and actual oscillation data showing that detection and localization can be achieved with shorter data windows. In addition, the utilization of the DEF as an energy filter to minimize false alarm rates is examined. Finally, real PMU data is used to evaluate the consistency of the DEF method and track the actual direction the Dissipating Energy (DE) flows in the power network.

Kirihara, Kenta↗

Textureless Macula Swelling Detection with Multiple Retinal Fundus Images

Retinal fundus images acquired with non-mydriatic digital fundus cameras are a versatile tool for the diagnosis of various retinal diseases. Because of the ease of use of newer camera models and their relatively low cost, these cameras can be employed by operators with limited training for telemedicine or Point-of-Care applications. We propose a novel technique that uses uncalibrated multiple-view fundus images to analyse the swelling of the macula. This innovation enables the detection and quantitative measurement of swollen areas by remote ophthalmologists. This capability is not available with a single image and prone to error with stereo fundus cameras. We also present automatic algorithms to measure features from the reconstructed image which are useful in Point-of-Care automated diagnosis of early macular edema, e.g., before the appearance of exudation. The technique presented is divided into three parts: first, a preprocessing technique simultaneously enhances the dark microstructures of the macula and equalises the image; second, all available views are registered using non-morphological sparse features; finally, a dense pyramidal optical flow is calculated for all the images and statistically combined to build a naiveheight- map of the macula. Results are presented on three sets of synthetic images and two sets of real world images. These preliminary tests show the ability to infer a minimum swelling of 300 microns and to correlate the reconstruction with the swollen location.

60 APPLIED LIFE SCIENCES↗

Proton radiography in three dimensions: A proof of principle of a new technique

Purpose: Monte Carlo simulations were used to investigate a range of phantom configurations to establish enabling three-dimensional proton radiographic techniques.Methods: A large parameter space of stacked phantom geometries composed of tissue inhomogeneity materials such as lung, bone, and cartilage inserted within water background were simulated using a purposefully modified version of TOPAS, an application running on top of the GEANT4 Monte Carlo code. The phantoms were grouped in two classes, one with the inhomogeneity inserted only half-way in the lateral direction and another with complete inhomogeneity insertion. The former class was used to calculate the track count and the energy fluence of the protons as they exit the phantoms either having traversed the inhomogeneity or not. The latter class was used to calculate one yield value accounting for loss of protons due to physical processes only and another yield value accounting for deliberately discarded protons due to large scattering angles. A graphical fingerprinting method was developed to determine the inhomogeneity thickness and location within the phantom based on track count and energy fluence information. Two additional yield values extended this method to the general case which also determines the inhomogeneity material and the phantom thickness.Results: The graphical fingerprinting method was manually validated for two, and automatically tested for all, tissue materials using an exhaustive set of inhomogeneity geometries for 16 cm thick phantoms. Unique recognition of test phantom configurations was achieved in the large majority of cases. The method in the general case was further tested using an exhaustive set of inhomogeneity and phantom tissues and geometries where the phantom thicknesses ranged between 8 and 24 cm. Unique recognition of the test phantom configurations was achieved only for part of the phantom parameter space. The correlations between the remaining false positive recognitions were analyzed.Conclusions: The concept of 3D proton radiography for tissue inhomogeneities of simple geometries was established with the current work. In contrast to conventional 2D proton radiography, the main objective of the demonstrated 3D technique is not proton range. Rather, it is to measure the depth and thickness of an inhomogeneity located in an imaged geometry. Further work is needed to extend and apply the method to more complex geometries.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

SU-E-J-261: Statistical Analysis and Chaotic Dynamics of Respiratory Signal of Patients in BodyFix

Purpose: To quantify respiratory signal of patients in BodyFix undergoing 4DCT scan with and without immobilization cover. Methods: 20 pairs of respiratory tracks recorded with RPM system during 4DCT scan were analyzed. Descriptive statistic was applied to selected parameters of exhale-inhale decomposition. Standardized signals were used with the delay method to build orbits in embedded space. Nonlinear behavior was tested with surrogate data. Sample entropy SE, Lempel-Ziv complexity LZC and the largest Lyapunov exponents LLE were compared. Results: Statistical tests show difference between scans for inspiration time and its variability, which is bigger for scans without cover. The same is for variability of the end of exhalation and inhalation. Other parameters fail to show the difference. For both scans respiratory signals show determinism and nonlinear stationarity. Statistical test on surrogate data reveals their nonlinearity. LLEs show signals chaotic nature and its correlation with breathing period and its embedding delay time. SE, LZC and LLE measure respiratory signal complexity. Nonlinear characteristics do not differ between scans. Conclusion: Contrary to expectation cover applied to patients in BodyFix appears to have limited effect on signal parameters. Analysis based on trajectories of delay vectors shows respiratory system nonlinear character and its sensitive dependence on initial conditions. Reproducibility of respiratory signal can be evaluated with measures of signal complexity and its predictability window. Longer respiratory period is conducive for signal reproducibility as shown by these gauges. Statistical independence of the exhale and inhale times is also supported by the magnitude of LLE. The nonlinear parameters seem more appropriate to gauge respiratory signal complexity since its deterministic chaotic nature. It contrasts with measures based on harmonic analysis that are blind for nonlinear features. Dynamics of breathing, so crucial for 4D-based clinical technologies, can be better controlled if nonlinear-based methodology, which reflects respiration characteristic, is applied. Funding provided by Varian Medical Systems via Investigator Initiated Research Project.

60 APPLIED LIFE SCIENCES↗