Search NASA⌕ Search

SEARCH · Search NASA

Results for “threads”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

The far-infrared polarization of the Orion nebula

Polarization of the 100 micron thermal emission from 10 points in the Orion nebula has been measured. At one of the positions the degree, 5.7 percent, is the largest far-infrared polarization yet discovered. Except at a position in the barlike structure to the south, the position angles of the polarization vectors are well-ordered, suggesting that a uniform magnetic field threads the cloud. The magnetic field strength is estimated to be between 0.7 and 4 mG. The relationship of the degrees of polarization to the physical conditions in the cloud is discussed.

Gonatas, D. P.↗
NASA NTRS1989

Linking consistency with object/thread semantics - An approach to robust computation

This paper presents an object/thread based paradigm that links data consistency with object/thread semantics. The paradigm can be used to achieve a wide range of consistency semantics from strict atomic transactions to standard process semantics. The paradigm supports three types of data consistency. Object programmers indicate the type of consistency desired on a per-operation basis and the system performs automatic concurrency control and recovery management to ensure that those consistency requirements are met. This allows programmers to customize consistency and recovery on a per-application basis without having to supply complicated, custom recovery management schemes. The paradigm allows robust and nonrobust computation to operate concurrently on the same data in a well defined manner. The operating system needs to support only one vehicle of computation - the thread.

Chen, Raymond C.↗
NASA NTRS1991

Bonding Aramid Rope To Metal Fitting

Method for joining Kevlar (or equivalent) aramid rope to tubular corrosion-resistant steel end fitting increases strength of joint under tension to approximately three-fourths that of rope itself. End fitting contains internal thread, which provides good bonding surface. Small radial hole enables injection of adhesive into bore.

To, Dung T.↗
NASA NTRS1991

Hand Broaching Tool For Use In Confined Areas

Broaching tool cuts keyslots in tapped holes. With exceptionally slim outer body, well suited for work in areas of limited accessibility, particularly when features of workpiece create obstructions. Threaded sections on inner and outer bodies mate. After inner body used to broach keyways in hole in workpiece, turning outer body by its handle forces bearing surface against workpiece and pulls inner body tip out of hole. Reduces time for broaching holes from 4 h to 1 h. Blade replaced only twice per circle.

Beach, Arthur A.↗
NASA NTRS1991

Staking Pliers

Ordinary pliers modified by addition of hard-pointed setscrew in one jaw and groove in opposite jaw. When jaws squeezed together on bolt, point deforms thread. Prevents loosened nut from backing off under vibrations or impact. In comparison with center punch and hammer, pliers easier and faster to use and less likely to damage parts.

Falls, Elwood S.↗
NASA NTRS1991

Pressure Roller For Tape-Lift Tests

Rolling device applies nearly constant, uniform pressure to surface. Simple tool exerts nearly constant pressure via compression of sheath by fixed amount. Pins hold wheels on cylinder and cylinder on tangs of handle. Cylinder and handle made of metal or plastic. Sheath press-fit or glued to cylinder. End pins attached to cylinder by adhesive or screw threads. Device intended for use in taking tape-lift samples of particulate contamination on surface.

Abrams, Eve↗
NASA NTRS1991

Ultrasonic Device Would Open Pipe Bombs

Piezoelectric ultrasonic transducer, energized by frequency generator and power supply, vibrates shell of pipe bomb while hardly disturbing explosive inner material. Frequency-control circuitry senses resonance in shell and holds generator at that frequency to induce fatigue cracking in threads of end cap. In addition to disarming bombs, ultrasonically induced fatigue may have other applications. In manufacturing, replaces some machining and cutting operations. In repair of equipment, cleanly and quickly disassembles corroded parts. In demolition of buildings used to dismember steel framework safely and controllably.

El-Raheb, Michael S.↗
NASA NTRS1991

Designing Applications For Fasteners

"Fastener Design Manual", written to provide design engineers with single source assisting in choosing appropriate fasteners for their designs. Gives practical information on selection of fastener materials, platings, lubricants, galvanic corrosion, embrittlement by hydrogen, locking methods, inserts, washers, types and classes of threads, fatigue loading, and fastener torque.

Barrett, Richard T.↗
NASA NTRS1990

InAs/Ga(1-x)In(x)Sb superlattices for infrared detector applications

The successful growth of InAs/Ga(1-x)In(x)Sb superlattices and their optical and structural characterization is discussed. Samples were grown by molecular beam epitaxy at fairly low substrate temperatures (less than 400 C). Structural quality was assessed by reflection high energy electron difrraction, transmission electron microscopy, and x ray diffraction. Excellent structures were achieved for growth on thick, strain relaxed GaSb buffer layers on GaAs substrates, despite a residual threading dislocation density of 10(exp 9)cm(exp -2) originating at the GaSb/GaAs interface. Despite a lattice mismatch of 1.7 percent, InAs/Ga(0.75)In(0.25)Sb superlattices are observed to be free of misfit dislocations at the thicknesses examined here, owing to the close lattice match between the superlattice and GaSb, which evenly distributes compressive and tensile stresses between the InAs and Ga(0.75)In(0.25)Sb layers. Photoluminescence and photoconductivity measurements indicate that the energy gaps of the strain-layer superlattices are smaller than those of InAs/GaSb superlattices with the same layer thicknesses, and are in agreement with the theoretical predictions of Smith and Mailhiot. Energy gaps of 80 to 250 meV (15 to 5 microns) have been measured for InAs/Ga(0.75)In(0.25)Sb superlattices with 45 to 25 A/25 A layer thickness. Results demonstrate that far-infrared cutoff wavelengths are compatible with the thin superlattice layers required for strong optical absorption in type-II superlattices.

Miles, Richard H.↗
NASA NTRS1990

Quick connect coupling

A coupling device has a transversely arranged, open-end groove in a flange attached to a pipe end. The groove in the flange receives a circumferentially arranged locking flange element on the other coupling member and permits alignment of the bores of the coupling members when the locking flange element is in the open end groove. Upon alignment of the bores of the coupling members, a trigger member is activated to automatically release a spring biased tubular member in one of the coupling members. The tubular member has a conical end which is displaced into the other coupling member to lock the coupling members to one another. A tensioning nut is threadedly movable on a coupling member so as to be moved into tightening engagement with the other coupling member.

Sprague, Benny B.↗
NASA NTRS1991

A simple 5-DOF walking robot for space station application

Robots on the NASA space station have a potential range of applications from assisting astronauts during EVA (extravehicular activity), to replacing astronauts in the performance of simple, dangerous, and tedious tasks; and to performing routine tasks such as inspections of structures and utilities. To provide a vehicle for demonstrating the pertinent technologies, a simple robot is being developed for locomotion and basic manipulation on the proposed space station. In addition to the robot, an experimental testbed was developed, including a 1/3 scale (1.67 meter modules) truss and a gravity compensation system to simulate a zero-gravity environment. The robot comprises two flexible links connected by a rotary joint, with a 2 degree of freedom wrist joints and grippers at each end. The grippers screw into threaded holes in the nodes of the space station truss, and enable it to walk by alternately shifting the base of support from one foot (gripper) to the other. Present efforts are focused on mechanical design, application of sensors, and development of control algorithms for lightweight, flexible structures. Long-range research will emphasize development of human interfaces to permit a range of control modes from teleoperated to semiautonomous, and coordination of robot/astronaut and multiple-robot teams.

Brown, H. Benjamin, Jr.↗
NASA NTRS1991

Mechanical strain isolator mount

Certain devices such as optical instruments must preserve their alignmental integrity while being subjected to mechanical strain. A mechanical strain isolator mount is provided to preserve the alignmental integrity of an alignment sensitive instrument. An alignment sensitive instrument is mounted on a rectangular base. Flexural legs are connected at their proximal ends to the rectangular base. Flexural legs are also spaced parallel to the sides. Mounting pads are connected to the legs at the distal end and the mechanical strain isolator mount is attached to the substrate by means of threaded bolts. When a mounting pad and its respective leg is subjected to lateral strain in either the X or Y direction via the substrate, the respective leg relieves the strain by bending in the direction of the strain. An axial strain on a mounting pad in the Z direction is relieved by a rotational motion of the legs in the direction of the strain. When the substrate is stress free, the flexural legs return to their original condition and thus preserve the original alignment integrity of the alignment sensitive instrument.

James, Gordon E.↗
NASA NTRS1989

End-effector-joint conjugates for robotic assembly of large truss structures in space: A second generation

Attachment of strut to node can be accomplished with a variety of mechanisms. All require extensive standoff elements (called scars) added to the nodes. These increase packaging volume for the nodes by as much as 300 percent. First generation designs also tend to be either heavy or expensive due to complex parts. Screws thread mechanisms are discussed simplest and most easily manufactured of alternatives. Torque and rotational motion must be transmitted across the strut to end-effector interface accomplishing the joining process and establishing a specific preload. Four drive mechanisms are considered: worm, helical, bevel, and differential gears.

Brewer, William V.↗
NASA NTRS1991

Bidirectional drive and brake mechanism

A space transport vehicle is disclosed as including a body which is arranged to be movably mounted on an elongated guide member disposed in outer space and driven therealong. A drive wheel is mounted on a drive shaft and arranged to be positioned in rolling engagement with the elongated guide carrying the vehicle. A brake member is arranged on the drive shaft for movement into and out of engagement with an adjacent surface of the drive wheel. An actuator is mounted on the body to be manually moved back and forth between spaced positions in an arc of movement. A ratchet-and-pawl mechanism is arranged to operate upon movements of the actuator in one direction between first and second positions for coupling the actuator to the drive wheel to incrementally rotate the wheel in one rotational direction and to operate upon movements of the actuator in the opposite direction for uncoupling the actuator from the wheel. The brake member is threadedly coupled to the drive shaft in order that the brake member will be operated only when the actuator is moved on beyond its first and second positions for shifting the brake member along the drive shaft and into frictional engagement with the adjacent surface on the drive wheel.

Swan, Scott A.↗
NASA NTRS1991

Growth and characterization of high current density, high-speed InAs/AlSb resonant tunneling diodes

InAs/AlSb double-barrier resonant tunneling diodes with peak current densities up to 370,000 A/sq cm and high peak-to-valley current ratios of 3.2 at room temperature have been fabricated. The peak current density is well-explained by a stationary-state transport model with the two-band envelope function approximation. The valley current density predicted by this model is less than the experimental value by a factor that is typical of the discrepancy found in other double-barrier structures. It is concluded that threading dislocations are largely inactive in the resonant tunneling process.

Soderstrom, J. R.↗
NASA NTRS1991

The fibril structure of prominences

It is suggested that the fibril structure of prominences may be caused by filamentation during its formation by radiative instability. Also discussed are the effects of other types of instability and a mechanism for the formation of vertical threads is given. The models indicate that highly inhomogeneous density structures can exist in the presence of smooth profiles for the plasma pressure and magnetic field. In the particular models the plasma pressure of a fibril prominence is higher and the vertical magnetical field is weaker than in a uniform prominence model, while the mass is substantially smaller.

Priest, E. R.↗
NASA NTRS1991

Seasonal variations in the subauroral electron temperature enhancement

A statistical study of the seasonal variations of the subauroral electron temperature enhancement was undertaken using data from the Langmuir probe experiment on the DE 2 satellite throughout most of the mission (1981-1982). In the winter hemisphere the nighttime background electron temperature is the highest and the magnitude of the peak Te responds most weakly to the geomagnetic activity. This behavior can be explained by seasonal trends in the nighttime downward heat flux due to conjugate photoelectrons. Moreover, model results indicate that a factor of about three increase in heat inflow during equinox relative to solstice is required to raise the electron temperature to a given level. This is a consequence of the higher electron densities at the Te peak near equinox. The Te peak occurs on field lines which thread the outer plasmasphere in the vicinity if the plasmapause and thus can be used as a tracer of the plasmapause position.

Fok, M.-C.↗
NASA NTRS1992

Preloading Collet Latch

Vibration-resistant fastener replaces pinned or threaded fastener. Collet latch preloads joined components. When mechanism fully locked, actuating lever 90 degrees from starting position and held by locking tab engaged in ratchet notch. Latch connected or disconnected almost instantly, without tools.

Wesselski, Clarence J.↗