Search NASA⌕ Search

SEARCH · Search NASA

Results for “ASH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Preparation and Characterization of Various Kraft Lignins and Impact on Their Pyrolysis Behaviors

Lignin-derived chemicals and fuel products have received much attention in the context of bio-refinery. In this study we prepared and characterized various lignin samples from black liquor (BL), a major byproduct from the pulp and paper manufacturing processes, and studied the pyrolysis behaviors of these isolated lignin samples at 600 °C under a N2 atmosphere. Three lignin samples were isolated from the Kraft pulping BL of Loblolly pine linerboard grade process (KL, obtained by direct evaporation; L10, obtained by precipitation at pH 10; L3, obtained by precipitation at pH 3), while another three were from the Kraft pulping BL of Loblolly pine bleach grade process (KB, B10, B3). The inorganic elements present in lignin samples were analyzed using an inductively coupled plasma (ICP) analyzer. The KL and KB samples contained a larger amount of inorganic elements, especially Na and S, than did the other lignin samples. Owing to large quantities of inorganic elements, the ash contents in KL and KB were higher than in the precipitated lignin samples (L10, B10, L3, and B3). These inorganic elements have a significant effect on the subsequent pyrolysis process, as a result, more extensive depolymerization of lignin occurred in KL and KB samples, leading to the formation of fewer pyrolysis oils, with lower molecular weights. NMR analyses of pyrolysis oils show that more methoxyl groups and ether bonds were cleaved, resulting in fewer methoxyl groups and aromatic C–O bonds for the KL and KB heavy oil than for the precipitated lignin heavy oil.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Integrated Circular Economy Model System for Direct Lithium Extraction: From Minerals to Batteries Utilizing Aluminum Hydroxide

Aluminum hydroxide, an abundant mineral found in nature, exists in four polymorphs: gibbsite, bayerite, nordstrandite, and doyleite. Among these polymorphs gibbsite, bayerite, and commercially synthesized amorphous aluminum hydroxide have been investigated as sorbent materials for lithium extraction from sulfate solutions. The amorphous form of Al(OH) 3 exhibits a reactivity higher than that of the naturally occurring crystalline polymorphs in terms of extracting Li + ions. This study employed high-temperature oxide melt solution calorimetry to explore the energetics of the sorbent polymorphs. The enthalpic stability order was measured to be gibbsite > bayerite > amorphous Al(OH) 3 . The least stable form, amorphous Al(OH) 3 , undergoes a spontaneous reaction with lithium, resulting in the formation of a stable layered double hydroxide phase. Consequently, amorphous Al(OH) 3 shows promise as a sorbent material for selectively extracting lithium from clay mineral leachate solutions. Further, this research demonstrates the selective direct extraction of Li + ions using amorphous aluminum hydroxide through a liquid–solid lithiation reaction, followed by acid-free delithiation and relithiation processes, achieving an extraction efficiency of 86%, and the maximum capacity was 37.86 mg·g –1 in a single step during lithiation. With high selectivity during lithiation and nearly complete recoverability of the sorbent material during delithiation, this method presents a circular economy model. Furthermore, a life cycle analysis was conducted to illustrate the environmental advantages of replacing the conventional soda ash-based precipitation process with this method, along with a simple operational cost analysis to evaluate reagent and fuel expenses.

25 ENERGY STORAGE↗

Steam-Stable Basic Immobilized Amine Sorbent Pellets for CO 2 Capture Under Practical Conditions

Pelletization of basic immobilized amine sorbent (BIAS) particles is required to improve their mechanical strength and facilitate their practical CO 2 capture application under fixed or dynamic reactor conditions. Herein, we utilized two methods to prepare amine-functionalized BIAS pellets. Method (ii-a) involved combining latex polychloroprene (PC)/polyamine solutions with fly ash (FA)/BIAS powder to form sorbent pellets. Alternatively, method (ii-b) entailed shaping and drying wet pastes of binder solution plus FA/SiO 2 powder into pellet supports. These supports were then functionalized with leach-resistant polyethylenimine MW = 800 (PEI 800 )/N-N-diglycidyl-4-glycidyloxyaniline (tri-epoxide cross-linker, E3) or ethylenamine E100/E3 mixtures. All pellets were screened for CO 2 capture by thermogravimetric analysis (dry 14% CO 2 /N 2 , 55–75 °C), H 2 O stability by accelerated water washing, and mechanical strength by crush and ball-mill attrition testing. The mechanism of superior method (ii-b) pellet formation was uncovered by N 2 physisorption measurements, diffuse reflectance infrared Fourier transform spectroscopy, and scanning electron microscopy. Extended fixed bed testing of optimum E3/PEI 800 -0.13/1 pellets under practical conditions revealed complete CO 2 capture stability of 1.5 mmol CO 2 /g after 48 h of continuous steam exposure (7.2% H 2 O/He, 105 °C) and minimal 14.6% loss in capacity after 75 hours of combined CO 2 capture cycling and steam treating (48 h). This slight oxidative degradation could be alleviated by incorporating a K 2 CO 3 antioxidant into the pellet formulation. Overall, the robust physiochemical properties of the polyamine/cross-linker method (ii-b) pellets confirm their suitability for pilot-scale testing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Beating Heterogeneity of Single-Site Catalysts: MgO-Supported Iridium Complexes

Catalysts consisting of isolated metal atoms on oxide supports have attracted wide attention because they offer unique catalytic properties, but their structures remain largely unknown because the metals are bonded at various, heterogeneous surface sites. Now, by using highly crystalline MgO as a support for metal sites made from a mononuclear organoiridium precursor and investigating the surface species with X-ray absorption spectroscopy, atomic resolution electron microscopy, and electronic structure theory, we have differentiated among the MgO surface sites for iridium bonding. The results demonstrate the contrasting structures and catalytic properties of samples, even including those incorporating iridium at loadings as low as 0.01 wt % and showing that the latter are nearly ideal in the sense of having almost all the Ir atoms at equivalent surface sites, with each Ir atom bonded to three oxygen atoms of the MgO surface. These supported molecular catalysts are modeled accurately with density functional theory. The results open the door to the precise synthesis of families of single-site catalysts. The work was supported by the U.S. Department of Energy (DOE), Office of Science (SC), Basic Energy Sciences (BES), Grant DE-FG02-04ER15513 and the DOE BES Catalysis Center Program by a subcontract from Pacific Northwest National Laboratory (KC0301050-47319) to the University of Alabama. We thank Chevron for fellowship support of ASH and LMD. DAD thanks the Robert Ramsay Chair Fund of The University of Alabama for support. A portion of the research was performed using facilities of the Environmental Molecular Sciences Laboratory (Ringgold ID 130367), a DOE SC User Facility sponsored by the Office of Biological and Environmental Research. Use of the Stanford Synchrotron Radiation Lightsource, SLAC National Accelerator Laboratory, is supported by DOE SC BES under Contract No. DE-AC02- 76SF00515. We thank Chevron Energy Technology Company for performing the XRD experiments.

single-site catalyst, iridium catalyst, MgO-suppor↗

Optimization of Desalination Systems with Detailed Water Chemistry through Integration of Reaktoro in WaterTAP

Chemistry predictions are critical for an accurate estimation of performance and costs in desalination process models, which allows for the estimation of the value of new technologies and the viability of treating new water sources. Herein, we present how an implicit function formulation can be used to integrate the chemical modeling package, Reaktoro, into the techno-economic assessment and modeling platform, WaterTAP. This approach resolves the critical issues of integrating large-scale thermodynamic models and databases into equation-oriented process models while allowing more flexibility relative to previously presented surrogate-based methods. We describe how this integration into Pyomo and WaterTAP models is implemented and used through the open-source package Reaktoro-PSE . We first validate this integration approach by performing optimization on a previously presented desalination treatment train with softening and acid addition as the pretreatment steps. Then, to demonstrate the value of this approach, we extend the cost-optimization problem to include the simultaneous addition of lime and soda ash for softening, and HCl and H 2 SO 4 in the acidification steps. Finally, we were able to confirm the previously established results that were obtained by using surrogate models and demonstrate that the implicit function approach enables exploration of different feedwater compositions and a larger number of chemicals and their combinations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Process Model-Based Validation of the Intensification of Biomass Fast Pyrolysis in a Fluidized Bed via Autothermal Operation

A model for the fluidized-bed pyrolysis of biomass is extended to enable the simulation of intensified autothermal operation. In this system, partial oxidation of char and pyrolysate species replaces an external heat source to supply the enthalpy of pyrolysis, greatly increasing the throughput of a given fast pyrolysis reactor. Oxidation reactions are compiled from CRECK and other literature sources and extended to cover the species found in pyrolysis products, including a derivation of the catalytic effect of ash on char combustion from experimental studies at Iowa State University (ISU). Results indicate a roughly 3-fold increase in biomass throughput for a given reactor volume at the pilot scale with minimal loss of valuable products, in agreement with published data from the 3 × 10 -2 m 3 reactor operated by ISU. Additionally, a proposal for a 250 ton/day commercial-scale biomass pyrolysis reactor is analyzed, showing that the same size reactor operated by heating the fluidizing gas externally would have only one-tenth the capacity; if operated by heating the sand externally, the sand would need to circulate at an impractical 0.7 bed volume per minute rate to maintain a 250 ton/day biomass throughput.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of Products from Fast Micropyrolysis of Municipal Solid Waste Biomass

Biomass feedstock costs remain one of the largest impediments to biofuel production economics. Municipal solid waste (MSW) represents an attractive feedstock with year-round availability, an established collection infrastructure paid for by waste generators, low cost and the potential to be blended with higher cost feedstocks to reduce overall feedstock costs. Paper waste, yard waste and construction and demolition waste (C&D) were examined for their applicability in the pyrolysis conversion pathway. Paper waste consisted of non-recyclable paper such as mixed low grade paper, food and beverage packaging, kitchen paper wastes and coated paper; yard waste consisted of grass clippings and C&D wastes consisted of engineered wood products obtained from a construction waste landfill. We tested the waste materials for thermochemical conversion potential using a bench scale fast micro-pyrolysis process. Bio-oil yields were the highest for the C&D materials and lowest for the paper waste. The C&D wastes had the highest level of lignin derived compounds (phenolic and cyclics) while the paper waste had higher levels of carbohydrate derived compounds (aldehydes, organic acids, ketones, alcohols and sugar derived). But, the paper material had higher amounts of lignin derived compounds than expected based upon lignin content that is likely due to the presence of polyphenolic resins used in paper processing. The paper and yard wastes had significantly higher levels of ash content than the C&D wastes (14-15% versus 0.5-1.3%), which further correlated to higher levels of alkali and alkaline earth metals, which are known to reduce pyrolysis bio-oil yields. There appeared to be an inverse correlation of both calcium and potassium content with the amount of chromatographic product peaks, indicative of cracking reactions occurring during product formation. Furthermore the effect of acid washing was evaluated for grass clipping and waste paper and the bio-oil yield was increased from 58% to 73% and 67% to 73%, respectively.

09 BIOMASS FUELS↗

Techno-economic Assessment for Integrating Biosorption into Rare Earth Recovery Process

The current uncertainty in the global supply of rare earth elements (REEs) necessitates the development of novel extraction technologies that utilize a variety of REE source materials. Herein, we examined the techno-economic performance of integrating a biosorption approach into a large-scale process for producing salable total rare earth oxides (TREOs) from various feedstocks. An airlift bioractor is proposed to carry out a biosorption process mediated by bioengineered rare earth-adsorbing bacterium. Techno-econmic asssements were compared for three distinctive categories of REE feedstocks that require different pre-processing steps. Key parameters identified that affect profitability include REE concentration, composition of the feedstock, and costs on feedstock pretreatment and waste management. Among the 11 specific feedstocks investigated, coal ash from the Appalachian Basin was projected to be the most profitable, largely due to its high-value REE content. Its cost breakdown includes leaching (80.7%), biosorption (16.0%), and oxalic acid precipitation and TREO roasting (3.3%). Surprisingly, biosorption from the high-grade Bull Hill REE ore is less profitable due to the high material cost and low production revenue. Altogether, our results confirmed that the economic potential of applying biosorption to low-grade feedstocks is viable.

60 APPLIED LIFE SCIENCES↗

Evaluating the combustion reactivity of drop tube furnace and thermogravimetric analysis coal chars with a selection of metal additives

Opportunities exist for effective coal combustion additives that can reduce the carbon content of pulverized fuel ash (PFA) to below 6%, thereby making it saleable for filler/building material applications without the need for postcombustion treatment. However, with only limited combustion data currently available for the multitude of potential additives, catalytic performance under pulverized fuel (PF) boiler conditions has received relatively little attention. This paper therefore compares the reactivity of catalyzed bituminous coal chars from thermogravimetric analysis (TGA) with those generated by devolatilization in a drop tube furnace (DTF). The principal aim was to explore the fundamental chemistry behind the chosen additives' relative reactivities. Accordingly, all eight of the investigated additives increased the TGA burnout rate of the TGA and DTF chars, with most of the catalysts demonstrating consistent reactivity levels across chars from both devolatilization methods. Copper(I) chloride, silver chloride, and copper nitrate were thus identified as the most successful additives tested, but it proved difficult to establish a definitive reactivity ranking. This was largely due to the use of physical mixtures for catalyst dispersion, the relatively narrow selection of additives examined, and the inherent variability of the DTF chars. Nevertheless, one crucial exception to normal additive behavior was discovered, with copper(I) chloride perceptibly deactivating during devolatilization in the DTF, even though it remained the most effective catalyst tested. As a prolonged burnout at over 1000{sup o}C was required to replicate this deactivation effect on the TGA, the phenomenon could not be detected by typical testing procedures. Subsequently, a comprehensive TGA study showed no obvious relationship between the catalyst-induced reductions in the reaction's apparent activation energy and the samples recorded burnout rates.

01 COAL, LIGNITE, AND PEAT↗

Effects of Measurement Materials and Oxygen Partial Pressure on the Viscosity of synthetic Eastern and Western United States Coal Slags

The viscosity of the molten ash (slag) resulting from the mineral constituents in carbon feedstock used in slagging gasifiers is critical for controlling the gasification process. The viscosity of two synthetic slags with compositions resembling the mineral impurities in average eastern and western coal feedstock was examined at temperatures from 1300–1500 °C using a rotating bob viscometer. A few combinations of atmospheres and experimental materials were investigated with respect to one another to determine slag viscosity. A CO/CO{sub 2} atmosphere (CO/CO{sub 2} = 1.8, corresponding to a P{sub O{sub 2}} = 10–8 atm) is required to sustain ferrous ions in FeO-containing slags, an environment that is oxidizing to most metals. Iron oxide in the slag prevents usage of Fe parts. In unpurified Ar, the Fe metal surface oxidizes. Using purified argon prevents iron measurement components from oxidation; however, the metallic surfaces act as nucleation sites for the reduction of the Fe oxide in the slag into metallic Fe. Dissolution of ceramic materials into the slag, including Al{sub 2}O{sub 3} and ZrO{sub 2}, occurs in both atmospheres. Therefore, evaluating slag properties in the laboratory is challenging. The measured viscosities of two synthetic slags in this study diverged depending upon material selection. This difference is likely attributable to container/spindle-slag interactions. Viscosity measurements of the eastern coal slag using all ceramic parts agreed best with FactSage prediction above 1350 °C, with an average activation energy of 271.2 kJ. For western coal slag, the dissolution of container/spindle materials was substantial during the measurement, with precipitation of crystalline phase noted. The experimental viscosity data of the western coal slag agreed best with Kalmanovitch prediction above 1350 °C. The activation energy changed dramatically for both data sets of western coal slag, likely indicating the Newtonian-to-non-Newtonian transition.

01 COAL, LIGNITE, AND PEAT↗

Steam-Coal Gasification Using CaO and KOH for in Situ Carbon and Sulfur Capture

We present experimental results of coal gasification with and without the addition of calcium oxide and potassium hydroxide as dual-functioning catalyst-capture agents. Using two different coal types and temperatures between 700 and 900 °C, we studied the effect of these catalyst-capture agents on (1) the syngas composition, (2) CO 2 and H 2 S capture, and (3) the steam-coal gasification kinetic rate. The syngas composition from the gasifier was roughly 20% methane, 70% hydrogen, and 10% other species when a CaO/C molar ratio of 0.5 was added. We demonstrated significantly enhanced steam–coal gasification kinetic rates when adding small amounts of potassium hydroxide to coal when operating a CaO-CaCO 3 chemical looping gasification reactor. For example, the steam–coal gasification kinetic rate increased 250% when dry mixing calcium oxide at a Ca/C molar ratio of 0.5 with a sub-bituminous coal, and the kinetic rate increased 1000% when aqueously mixing calcium oxide at a Ca/C molar ratio of 0.5 along with potassium hydroxide at a K/C molar ratio of 0.06. In addition, we conducted multi-cycle studies in which CaCO 3 was calcined by heating to 900 °C to regenerate the CaO, which was then reused in repeated CaO-CaCO 3 cycles. The increased steam-coal gasification kinetics rates for both CaO and CaO + KOH persisted even when the material was reused in six cycles of gasification and calcination. The ability of CaO to capture carbon dioxide decreased roughly 2-4% per CaO-CaCO 3 cycle. We also discuss an important application of this combined gasifier-calciner to electricity generation and selling the purge stream as a precalcined feedstock to a cement kiln. In this scenario, the amount of purge stream required is fixed not by the degradation in the capture ability but rather by the requirements at the cement kiln on the amount of CaSO 4 and ash in the precalcined feedstock.

01 COAL, LIGNITE, AND PEAT↗

Catalytic steam gasification reactivity of HyperCoals produced from different rank of coals at 600-775{degree}C

HyperCoal is a clean coal with ash content <0.05 wt %. HyperCoals were prepared from a brown coal, a sub-bituminous coal, and a bituminous raw coal by solvent extraction method. Catalytic steam gasification of these HyperCoals was carried out with K{sub 2}CO{sub 3} at 775, 700, 650, and 600 {degree}C, and their rates were compared. HyperCoals produced from low-rank coals were more reactive than those produced from the high-rank coals. XRD measurements were carried out to understand the difference in gasification reactivity of HyperCoals. Arrhenius plot of ln (k) vs 1/T in the temperature range 600-825{degree}C was a curve rather than a straight line. The point of change was observed at 700{degree}C for HyperCoals from low-rank coals and at 775{degree}C for HyperCoals from high-rank coals. Using HyperCoal produced from low-rank coals as feedstock, steam gasification of coal may be possible at temperatures less than 650{degree}C. 22 refs., 6 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Characterization of early-stage coal oxidation by temperature-programmed desorption

To obtain representative temperature-programmed desorption (TPD) profiles of young oxidized chars up to 1650{degree}C with minimal reactor wall interferences, the chemistry and physics of four ceramic materials has been critically reviewed. A two-staged experimental apparatus is then uniquely designed to produce chars in an Al{sub 2}O{sub 3} flow reactor with 1-21% O{sub 2} followed by in situ TPD with a SiC tube. Comparison of TPD profiles of oxidized chars with those from pyrolyzed chars and ashes suggests early-stage char oxidation is profoundly influenced by oxygen from three sources: organic oxygen, mineral matters, and gas phase O{sub 2}. Young chars oxidized at 1000{degree}C with less than 0.3 s residence time shows CO desorption peaks during TPD at three distinct temperatures: 730, 1280, and 1560{degree}C. The peaks at 730{degree}C are mainly caused by incomplete devolatilization. The peaks at 1280{degree}C mainly represent desorption of stable surface oxides and incomplete devolatilization. Increasing the gas phase oxidants notably increases the amount of stable surface oxides. The broad peaks between 1400 and 1650{degree}C are attributed to the reactions of oxidants decomposed from minerals and carbon in the char or SiC tube. Gas-phase oxygen shifts these reactions to lower temperatures. Detailed oxygen balance based on the CO and CO{sub 2} yields and elemental compositions of both pyrolysis and oxidized chars reveals that oxygen uptakes are very high, +0.056 mg O per mg of carbon, in chars derived from bituminous coal, whereas lignite chars show negative oxygen uptake, -0.020 mg O per mg of carbon, in char. Indeed, lignite char seems to possess little amount of stable surface oxides other than those contributed by the minerals. The extensive emissions of CO from lignite chars during TPD seem to suggest that either O{sub 2} or minerals promotes the oxygen transfer on char surface and subsequent carbon oxidation. 85 refs., 5 figs., 4 tabs.

01 COAL, LIGNITE, AND PEAT↗

Effect of bed pressure drop on performance of a CFB boiler

The effect of bed pressure drop and bed inventory on the performances of a circulating fluidized bed (CFB) boiler was studied. By using the state specification design theory, the fluidization state of the gas-solids flow in the furnace of conventional CFB boilers was reconstructed to operate at a much lower bed pressure drop by reducing bed inventory and control bed quality. Through theoretical analysis, it was suggested that there would exist a theoretical optimal value of bed pressure drop, around which the boiler operation can achieve the maximal combustion efficiency and with significant reduction of the wear of the heating surface and fan energy consumption. The analysis was validated by field tests carried out in a 75 t/h CFB boiler. At full boiler load, when bed pressure drop was reduced from 7.3 to 3.2 kPa, the height of the dense zone in the lower furnace decreased, but the solid suspension density profile in the upper furnace and solid flow rate were barely influenced. Consequently, the average heat transfer coefficient in the furnace was kept nearly the same and the furnace temperature increment was less than 17{sup o}C. It was also found that the carbon content in the fly ash decreased first with decreasing bed pressure drop and then increased with further increasing bed pressure drop. The turning point with minimal carbon content was referred to as the point with optimal bed pressure drop. For this boiler, at the optimum point the bed pressure was around 5.7 kPa with the overall excess air ratio of 1.06. When the boiler was operated around this optimal point, not only the combustion efficiency was improved, but also fan energy consumption and wear of heating surface were reduced. 23 refs., 6 figs., 4 tabs.

01 COAL, LIGNITE, AND PEAT↗

Volume Flow Rate Estimation for Small Explosions at Mt. Etna, Italy, From Acoustic Waveform Inversion

Rapid assessment of the volume and the rate at which gas and pyroclasts are injected into the atmosphere during volcanic explosions is key to effective eruption hazard mitigation. Here, we use data from a dense infrasound network deployed in 2017 on Mt. Etna, Italy, to estimate eruptive volume flow rates (VFRs) during small gas-and-ash explosions. We use a finite-difference time-domain approximation to compute the acoustic Green's functions and perform a full waveform inversion for a multipole source, combining monopole and horizontal dipole terms. The inversion produces realistic estimates of VFR, on the order of 4 × 10 4 m 3 /s and well-defined patterns of source directivity. This is the first application of acoustic waveform inversion at Mt. Etna. Our results demonstrate that acoustic waveform inversion is a mature and robust tool for assessment of source parameters and holds potential as a tool to provide rapid estimates of VFR in near real time.

58 GEOSCIENCES↗

Analyzing Wildland Fire Smoke Emissions Data Using Compositional Data Techniques

By conservation of mass, the mass of wildland fuel that is pyrolyzed and combusted must equal the mass of smoke emissions, residual char and ash. For a given set of conditions, these amounts are fixed. This places a constraint on smoke emissions data which violates statistical assumptions for many of the methods currently used to analyze these data such as linear regression, analysis of variance, and t-tests. These data are inherently multivariate and non-negative parts of a whole. This paper introduces the field of compositional data analysis to the emissions community and provides examples of appropriate statistical treatment of emissions data. It is shown that modified combustion efficiency should not be used as a predictor variable for other smoke emissions because it is not an independent variable. An alternative method based on compositional linear trends to estimate trace gas composition using CO and CO2 is presented. The data used in this paper resulted from projects the DOD/DOE/EPA Strategic 586 Environmental Research and Development Program projects RC-1648 and 1649. The senior 587 author appreciates the guidance and R scripts provided by Prof. Girty at San Diego State 588 University to estimate linear trends by perturbation. J. P.-A. was supported by the Spanish 589 Ministry of Science, Innovation and Universities under the project CODAMET (RTI2018-590 095518-B-C21, 2019-2021). The data used in this study have been previously published and are 591 available in the original publications. DRW conceived the initial manuscript (70 percent) and 592 performed the bulk of the data analysis. JPA provided statistical guidance and compositional data 593 expertise and contributed 20 percent of the manuscript. TJJ and HJ were extensively involved in 594 the study that provided the data. TJJ provide smoke emissions expertise and HJ provided 595 combustion expertise. The authors declare that they have no conflict of interest. The use of trade 596 or firm names in this publication is for reader information and does not imply endorsement by 597 the U.S. Department of Agriculture of any product or service.

simplex, compositional data analysis, balance, log↗

Informed Multi‐Scale Approach Applied to the British Columbia Fires of Late Summer 2017

Abstract Pyrocumulonimbus (PyroCb) clouds have a complex origin dependent on fire dynamics and meteorological conditions. When a pyrocumulonimbus cloud develops and is maintained over a period of time, it can inject significant aerosol into the troposphere and lower stratosphere, resulting in a longer‐term (months to years) occurrence of aerosol in the stratosphere. In this work, we investigate the British Columbia wildfires on 12–13 August 2017 using a multi‐scale simulation framework. We use the output of a physics‐based wildfire model (FIRETEC) with parameterized energy, particle, and gas emissions to drive the upper atmospheric aerosol mass injection within a regional cloud resolving model (HIGRAD). We demonstrate that vertical motions produced by latent heat release of the condensation of ice and cloud particles within the PyroCbs induce another 5 km of lifting of the simulated aerosol plume. Primary black carbon and organic aerosols (OAs) alone may not be enough to explain the observed aerosol burden, thus we show that secondary OA produced via condensation of gases by the fires, ash, and possibly dust can enhance lofted aerosol mass. A simulation with all emission mechanisms active, driven by the observed fuel load and environmental conditions, reasonably reproduces an aerosol profile inferred from observational data.

54 ENVIRONMENTAL SCIENCES↗

A role for subducting clays in the water transportation into the Earth’s lower mantle

Subducting sedimentary layer typically contains water and hydrated clay minerals. The stability of clay minerals under such hydrous subduction environment would therefore constraint the lithology and physical properties of the subducting slab interface. Here we show that pyrophyllite (Al 2 Si 4 O 10 (OH) 2 ), one of the representative clay minerals in the alumina-silica-water (Al 2 O 3 -SiO 2 -H 2 O, ASH) system, breakdowns to contain further hydrated minerals, gibbsite (Al(OH) 3 ) and diaspore (AlO(OH)), when subducts along a water-saturated cold subduction geotherm. Such a hydration breakdown occurs at a depth of ~135 km to uptake water by ~1.8 wt%. Subsequently, dehydration breakdown occurs at ~185 km depth to release back the same amount of water, after which the net crystalline water content is preserved down to ~660 km depth, delivering a net amount of ~5.0 wt% H 2 O in a phase assemblage containing δ-AlOOH and phase Egg (AlSiO 3 (OH)). Our results thus demonstrate the importance of subducting clays to account the delivery of ~22% of water down to the lower mantle.

58 GEOSCIENCES↗