Search NASA⌕ Search

SEARCH · Search NASA

Results for “Capacitance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Origin of proton irradiation-induced deep acceptors in Al 0.70 Ga 0.30 N

Deep level defect introduction and carrier removal were characterized using steady-state photocapacitance (SSPC), deep level transient spectroscopy (DLTS) and lighted capacitance–voltage for proton irradiated n-type Al 0.70 Ga 0.30 N Schottky diodes grown by metal-organic vapor phase epitaxy on AlN-on-sapphire templates. SSPC observed deep levels in the as-grown diode with zero-phonon transition energies of 2.20, 2.65, 3.10, 3.40, and 4.65 eV relative to the conduction band minimum (E c ), and an additional deep level emerged at 1.20 eV with irradiation. Lighted capacitance–voltage measurements quantified the deep level concentration (N t ) of states detected by SSPC, and it was observed that N t increased with proton fluence only for the 1.2 and 4.65 eV levels. Carrier removal was much larger than the increase in N t of the 1.2 and 4.65 eV deep levels, suggesting that radiation-induced deep level compensators existed beyond what was detected with SSPC. DLTS detected additional, proton-induced deep acceptors at E c —0.55, 0.82, and 1.16 eV, the latter of which is likely the same 1.20 eV deep state observed by SSPC. The concentration of the E c —0.82 eV defect state was large enough to reconcile carrier removal with total deep level introduction. Comparing the E c —0.82 and 1.16 eV deep acceptor levels to previous experimental and theoretical reports suggests that their atomistic origins could be the nitrogen vacancy (V N ) and oxygen substituting on the nitrogen sub-lattice (O N ), respectively. This defect behavior contrasts starkly with GaN, where V N and O N are shallow donors, and demonstrates that the electronic properties of defects can evolve drastically within the AlGaN alloy system ranging from wide bandgap GaN to ultra-wide bandgap AlN.

Armstrong, Andrew Michael [Sandia National Laborat↗

Interfaces of dicationic ionic liquids and graphene: a molecular dynamics simulation study

Molecular dynamics simulations were performed to investigate the interfacial structure and capacitance of electrical double layers (EDLs) in dicationic ionic liquids (DILs) 1-alkyl-3-dimethylimidazolium tetrafluoroborate [Cn(mim)2](BF4)2 (n = 3, 6, 9), with respect to a baseline of a monocationic ionic liquid [C3mim][BF4], near planar carbon electrodes consisting of graphene sheets. The simulation results show that an adsorbed layer with double peaks is exclusively found for [C3(mim)2](BF4)2, while a single peak of the other three cations is observed at the neutral electrode, due to the difference in ion–wall interaction and cation–anion association. As the electrode becomes negatively charged, the second peak of [C3(mim)2]2+ is dramatically reduced, whereas those of [C6(mim)2]2+ and [C9(mim)2]2+ become non-trivial. The capacitance–potential curve of EDLs in DILs manifests a transition from camel shape to bell shape as the cation chain length increases, which is attributed to the enlargement of ion adsorption (per unit charge) on the electrode and the decrease of attractive interaction between ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A sensing material-free and simple readout MEMS sensor for detecting Helium

Abstract In this work, we report a method that enables a standard electrostatic MEMS device to perform complex sensing functionalities, such as detecting the presence of helium without a sensing material or a conditioning circuit. Helium is a noble, odorless, non-reactive gas that is very challenging to detect. It is used in critical applications such as storing nuclear fuel waste inside a dry cask. In these applications, its leakage from the dry cask may indicate the cask's safe operation's degradation. A departure from the common practice of exciting the MEMS around its mechanical resonance, the method is based on exciting the MEMS around its electrical resonance circuit. This method shows that the tiny difference between the air dielectric constant (1.00059) and helium (1.000067) corresponding to only a few Femtofarad level capacitances produces a 25 mV difference without a conditioning circuit. Simulation results confirmed those findings and explored the sensor response at different operation conditions. This method eliminates the need for a heated microstructure and the need for absorption material. This method is not limited to gas sensing. It can be applied to other sensing mechanisms, such as acceleration and pressure measurements, and eliminate the complex circuit to read small capacitance in these applications.

Mohaidat, Sulaiman↗

Trivalent ion overcharging on electrified graphene

We report the structure of the electrical double layer (EDL) formed near graphene in aqueous environments strongly impacts its performance for a plethora of applications, including capacitive deionization. In particular, adsorption and organization of multivalent counterions near the graphene interface can promote nonclassical behaviors of EDL including overcharging followed by co-ion adsorption. In this paper, we characterize the EDL formed near an electrified graphene interface in dilute aqueous YCl 3 solution using in situ high resolution x-ray reflectivity (also known as crystal truncation rod) and resonant anomalous x-ray reflectivity (RAXR). These interface-specific techniques reveal the electron density profiles with molecular-scale resolution. We find that yttrium ions (Y 3+ ) readily adsorb to the negatively charged graphene surface to form an extended ion profile. This ion distribution resembles a classical diffuse layer but with a significantly high ion coverage, i.e., 1 Y 3+ per 11.4 ± 1.6 Å 2 , compared to the value calculated from the capacitance measured by cyclic voltammetry (1 Y 3+ per ~240 Å 2 ). Such overcharging can be explained by co-adsorption of chloride that effectively screens the excess positive charge. The adsorbed Y 3+ profile also shows a molecular-scale gap (≥ 5 Å) from the top graphene surfaces, which is attributed to the presence of intervening water molecules between the adsorbents and adsorbates as well as the lack of inner-sphere surface complexation on chemically inert graphene. We also demonstrate controlled adsorption by varying the applied potential and reveal consistent Y 3+ ion position with respect to the surface and increasing cation coverage with increasing the magnitude of the negative potential. This is the first experimental description of a model graphene-aqueous system with controlled potential and provides important insights into the application of graphene-based systems for enhanced and selective ion separations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical characterization of deep-level defects in n-type Al x In y Ga 1- x - y P for the development of solid-state photomultiplier analogs

Characterizing intrinsic defects is an essential step in evaluating materials for novel optoelectronic device applications. For photomultipliers, suppressing dark currents is critical, but a tradeoff is present between maximizing the band gap while remaining sensitive to the wavelength of interest and minimizing the incorporation of fresh defects by growing not-yet-optimized alloys. We present a series of capacitance-based measurements, including deep-level optical spectroscopy, steady-state photocapacitance, and illuminated capacitance-voltage, on photodiodes with lightly n-type Al x In y Ga 1−x−y P absorber regions. Several deep levels are identified, including one near the midgap. Although the inclusion of aluminum increases each trap density by approximately 10×, the hole capture cross-section also appears to decrease, suggesting that Shockley–Read–Hall dark currents may be suppressed. These materials may be good candidates for the development into silicon photomultiplier analogs with a wider bandgap for scintillator applications.

III–V↗

Cavallo's multiplier for in situ generation of high voltage

Here, a classic electrostatic induction machine, Cavallo's multiplier, is suggested for in situ production of very high voltage in cryogenic environments. The device is suitable for generating a large electrostatic field under conditions of very small load current. Operation of the Cavallo multiplier is analyzed, with quantitative description in terms of mutual capacitances between electrodes in the system. A demonstration apparatus was constructed, and measured voltages are compared to predictions based on measured capacitances in the system. The simplicity of the Cavallo multiplier makes it amenable to electrostatic analysis using finite element software, and electrode shapes can be optimized to take advantage of a high dielectric strength medium such as liquid helium. A design study is presented for a Cavallo multiplier in a large-scale, cryogenic experiment to measure the neutron electric dipole moment.

47 OTHER INSTRUMENTATION↗

Magnetization dynamics driven by displacement currents across a magnetic tunnel junction

Understanding the high-frequency transport characteristics of magnetic tunnel junctions (MTJs) is crucial for the development of fast-operating spintronics memories and radio frequency devices. Here, we present the study of a frequency-dependent capacitive current effect in Co Fe B / Mg O -based MTJs and its influence on magnetization dynamics using a time-resolved magneto-optical Kerr effect technique. In our device, operating at gigahertz frequencies, we find a large displacement current of the order of mA, which does not break the tunnel barrier of the MTJ. Importantly, this current generates an Oersted field and spin-orbit torque, inducing magnetization dynamics. Our discovery holds promise for building robust MTJ devices operating under high current conditions, also highlighting the significance of capacitive impedance in high-frequency magnetotransport techniques. Published by the American Physical Society 2024

Safeer, C. K. (ORCID:0000000323969730)↗

Anisotropic multicarrier transport at the (111) LaAlO 3 /SrTiO 3 interface

The conducting gas that forms at the interface between LaAlO 3 and SrTiO 3 has proven to be a fertile playground for a wide variety of physical phenomena. The bulk of previous research has focused on the (001) and (110) crystal orientations. In this work, we report detailed measurements of the low-temperature electrical properties of (111) LAO/STO interface samples. We find that the low-temperature electrical transport properties are highly anisotropic in that they differ significantly along two mutually orthogonal crystal orientations at the interface. While anisotropy in the resistivity has been reported in some (001) samples and in (110) samples, the anisotropy in the (111) samples reported here is much stronger and also manifests itself in the Hall coefficient as well as the capacitance. In addition, the anisotropy is not present at room temperature and at liquid nitrogen temperatures, but only at liquid helium temperatures and below. The anisotropy is accentuated by exposure to ultraviolet light, which disproportionately affects transport along one surface crystal direction. Furthermore, analysis of the low-temperature Hall coefficient and the capacitance as a function of back gate voltage indicates that in addition to electrons, holes contribute to the electrical transport.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrostatic Coupling between Two Surfaces of a Topological Insulator Nanodevice

We report on electronic transport measurements of dual-gated nanodevices of the low-carrier density topological insulator (TI) B i1.5 Sb 0.5 Te 1.7 Se 1.3 . In all devices, the upper and lower surface states are independently tunable to the Dirac point by the top and bottom gate electrodes. In thin devices, electric fields are found to penetrate through the bulk, indicating finite capacitive coupling between the surface states. A charging model allows us to use the penetrating electric field as a measurement of the intersurface capacitance C TI and the surface state energy-density relationship $μ(n)$, which is found to be consistent with independent angle-resolved photoemission spectroscopy measurements. At high magnetic fields, increased field penetration through the surface states is observed, strongly suggestive of the opening of a surface state band gap due to broken time-reversal symmetry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlated Double-Electron Additions at the Edge of a Two-Dimensional Electronic System

We create laterally large and low-disorder GaAs quantum-well-based quantum dots that act as small two-dimensional electron systems. We monitor tunneling of single electrons to the dots by means of capacitance measurements and identify single-electron capacitance peaks in the addition spectrum from occupancies of one up to thousands of electrons. The data show two remarkable phenomena in the Landau level filling factor range ν = 2 to ν = 5 in selective probing of the edge states of the dot: (i) Coulomb blockade peaks arise from the entrance of two electrons rather than one; (ii) at and near ν = 5/2 and at fixed gate voltage, these double-height peaks appear uniformly in a magnetic field with a flux periodicity of h/2e, but they group into pairs at other filling factors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A High-Precision Instrument for Mapping of Rotational Errors in Rotary Stages

A rotational stage is a key component of every X-ray instrument capable of providing tomographic or diffraction measurements. To perform accurate three-dimensional reconstructions, runout errors due to imperfect rotation (e.g. circle of confusion) must be quantified and corrected. A dedicated instrument capable of full characterization and circle of confusion mapping in rotary stages down to the sub-10 nm level has been developed. A high-stability design, with an array of five capacitive sensors, allows simultaneous measurements of wobble, radial and axial displacements. The developed instrument has been used for characterization of two mechanical stages which are part of an X-ray microscope.

36 MATERIALS SCIENCE↗

Loop Antennas for Use On/Off Ground Planes

Many applications benefit from the ability of an RFID tag to operate both on and off a conducting ground plane. This paper presents an electrically small loop antenna at 433 MHz that passively maintains its free-space tune and match when located a certain distance away from a large conducting ground plane. The design achieves this using a single radiation mechanism (that of a loop) in both environments without the use of a ground plane or EBG/AMC structure. An equivalent circuit model is developed that explains the dual-environment behavior and shows that the geometry balances inductive and capacitive parasitics introduced by the ground plane such that the free-space loop reactance, and thus resonant frequency, does not change. A design equation for balancing the inductive and capacitive parasitic effects is derived. Finally, experimental data showing the design eliminates ground plane detuning in practice is presented. The design is suitable for active, “hard” RFID tag applications.

42 ENGINEERING↗

Avoiding Divergent Oscillation of Cascode GaN Device under High Current Turn-off Condition

Cascode structure is widely used for high voltage normally-on GaN devices. However, the capacitance mismatch between the high voltage GaN device and the low voltage normally- off Si MOSFET may induce several undesired features, such as Si MOSFET reaches avalanche during turn-off, and high voltage GaN device loses ZVS turn-on condition internally during soft-switching turn-on process in every switching cycle. This paper presents another issue associated with the capacitance mismatch in the cascode GaN devices. Divergent oscillation could occur at high current turn-off condition, and eventually destroy the device. The intrinsic reason of this phenomenon is analyzed in detail in this paper. A simple solution is proposed by adding an additional capacitor whose position is critical and should be optimized. Experimental results validate the theoretical analysis, and show that the proposed method improves device performance significantly under high current turn-off condition.

Du, Weijing↗

A Simple Control to Reduce Device Over-Voltage Caused by Non-Active Switch Loop in Three-Level ANPC Converters

With the development of wide band-gap (WBG) technology, the switching speed of power semiconductor devices increases, which makes circuits more sensitive to parasitics. For three-level active neutral point clamped (3L-ANPC) converters, the over-voltage caused by additional non-active switch loop can be an issue. This paper analyzes the multiple commutation loops in 3L-ANPC converter and summarizes the impact factors of the device over-voltage. The nonlinearity of the output capacitance of the device can significantly influence the over-voltage. A simple control without introducing additional hardware circuit or complex software algorithm is proposed to attenuate the effect of the nonlinear output capacitance. Multi-pulse test is conducted for a 3L-ANPC converter built with silicon carbide (SiC) MOSFETs. With the proposed control, the testing results show that the peak drain-source voltage of both active and non-active switches is reduced by more than 20% compared to the conventional control.

Gui, Handong↗

DC Link Capacitor Reduction with Feedforward Control in Series-Series Compensated Wireless Power Transfer Systems

This paper presents the use of feedforward control to reduce the input side DC link capacitance of series-series compensated wireless power transfer (WPT) systems. Compared to conventional control schemes for WPT systems, the proposed feedforward-based approach achieves significant reduction in the DC link capacitor without any complicated voltage or current sensing requirements from the secondary side. This results in more compact hardware architecture. The proposed method shows minimal increase in the turn-on switching loss of the inverter. The switching loss is analyzed, and detailed results are presented relating the switching loss to the DC link capacitance and voltage ripple for proper tradeoff between losses and capacitor size. Simulation and experimental results presented validate the proposed scheme.

Mukherjee, Subho↗

A Multi-Harmonic System Identification Method for Internal Circuit Element Monitoring

Many critical infrastructures depend on the reliability of electronic circuits, whose health depends on the values of internal circuit elements that degrade over time. It is therefore important to estimate the values of internal circuit elements from external measurements and monitor them for changes. The challenge to doing so is that, typically, the internal voltages and currents are not accessible for measurement. Prior work on internal circuit element monitoring uses data obtained from sensors placed inside the circuit or requires additional circuitry to be added to the given system, both of which are undesirable. We propose a new multi-harmonic frequency-domain based system identification method that is non-intrusive. It exploits the latent non-idealities already present in the system, specifically harmonics in the measured input and output signals. We show how sensitivity analysis can be used to both assess the accuracy of the method as well as to optimize the choice of harmonics to use. We use as a motivation and illustrative example the problem of determining the equivalent series resistance and capacitance in a class of dc-link capacitance circuits in Adjustable Speed Drives. We assess the performance of this method using simulations, and establish its validity by experimental results.

Deshpande, Ankit Vivek↗

First Demonstration of Vertical 2T-nC FeRAM Hybrid Cell and its Scalability for High-Density 3D Ferroelectric Capacitor Memory

In this article, we perform a comprehensive experimental and modeling study into the scaling of vertical 2T-nC ferroelectric random-access memory (FeRAM) hybrid cell to demonstrate a high performance and high-density 3D capacitor memory. We demonstrate: i) first time successful integration of the vertical 2T-3C FeRAM cell by stacking the vertical metal-ferroelectricmetal (MFM) stack on top of Si CMOS transistors; ii) successful experimental operation of the memory cell, including the quasi-nondestructive read out (QNRO) of the polarization without write back after 106 read cycles; iii) the write bit line (WBL) heavily screens the coupling between neighboring strings, making it a minor concern; V ) aggressive stacking of the WBLs, i.e., number of MFMs in a string, could facilitate the self-boosting during write operation due to ferroelectric linear capacitance (CFE), which allows self-boosted inhibition for Vw/2 scheme and worsens the Vw/3 scheme as disturb increases to intolerable 2Vw/3; v) aggressive horizontal scaling significantly increases the read disturb to cells on neighboring planes due to capacitance between two WBLs (Cz).

42 ENGINEERING↗

Power Layout Design of a GaN HEMTs-Based High-Power High-Efficiency Three-Level ANPC Inverter for 800 V DC Bus System

Multiple commutation paths exist for switching devices in a three-level active neutral point clamped (3L-ANPC) inverter operation based on the selected switching state and current direction. In addition, the capacitive coupling path of the nonswitching device is a key design aspect for enabling high voltage and high current operation of gallium nitride (GaN) switches in 3L-ANPC topology. A comprehensive study of the switching transient events of inner, outer, and clamping devices of 3L-ANPC is presented in this article. The commutation mechanisms for worst-case transient voltage overshoots (TVOs) are identified. A simplified equivalent circuit model is presented to determine the design criteria for the power layout structure's parasitic inductances. A power layout strategy satisfying the design criteria is then proposed using an insulated metal substrate power printed circuit board (PCB) to enable efficient high-power operation. The proposed design minimizes the commutation and capacitive coupling path inductances to 6 nH and 11.5 nH, respectively. This enables the fast switching operation of GaN HEMTs at 800 V dc, 36 A with a low TVO of 31% verified through experimental three-level double pulse test results. Experimental evaluation of a three-phase 3L-ANPC hardware prototype based on the proposed power layout shows 99% efficiency at 800 V, 9.5 kVA and 50 kHz switching frequency. The proposed design achieves a low case-to-ambient thermal resistance of 2.3 °C/W.

42 ENGINEERING↗