Search NASA⌕ Search

SEARCH · Search NASA

Results for “Capping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Irradiation route to aqueous synthesis of highly luminescent ZnSe quantum dots and its function as a copper ion fluorescence sensor

Highlights: • Radiation chemical technique can provide a useful route for synthesis of ZnSe QDs. • Chelating nature of ethylene diamine is exploited for capping nanoparticles. • ZnSe QDs can be a suitable sensitive alternative to toxic cadmium-based system. • Cu(II) ion is probed by QDs in the presence of other physiologically relevant ions. - Abstract: Size-controlled synthesis of stable ZnSe QDs with narrow distribution in aqueous environment through conventional soft chemical method still poses a challenge. The proposed radiation assisted strategy demonstrates aqueous synthesis of stable, monodisperse and luminescent ZnSe QDs capped with chelating ethylene diamine under ambient conditions and at room temperature. Radiation chemical method facilitates in slow and in-situ release of selenium ion from sodium selenosulfate. The concentrations of precursors, such as zinc salt, selenium source, ethylene diamine and absorbed radiation (7–90 kGy) dose were optimized for obtaining good quality particles. Selective quenching of luminescence of as-synthesized quantum dots (QDs) by Cu{sup 2+} ions vis-à-vis other physiologically important cations provide evidence for use of ZnSe quantum dots as alternative to toxic Cd-based quantum dots to probe Cu{sup 2+} ions. The linear relation of ratio of loss in emission intensity as a function of concentration of Cu(II) indicates detection limit in nano-molar range.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Aspect ratio control and photocatalytic properties analysis of anatase TiO2 nanoparticles

Highlights: • TiO{sub 2} nanoparticles with different aspect ratio were prepared and characterized. • Their aspect ratio is tuned by varying surfactants molar ratio and concentration. • TiO{sub 2} nanoparticles show photocatalytic activities in degradation of methylene blue. - Abstract: Anatase TiO{sub 2} nanoparticles with tuning size and aspect ratio were successfully prepared by a simple solvothermal method, using ethanol as a solvent, titanium butoxide as a precursor, and oleic acid and oleylamine as anionic and cationic capping agents, respectively. The average size and aspect ratio of these nanoparticles can be greatly regulated by varying the oleic acid/oleylamine molar ratio while keeping their total molar content constant and finely adjusted by increasing the total capping agents molar concentration in solvent at constant molar ratio (oleic acid/oleylamine molar ratio = 1:1). The variation of molar ratio or molar concentration enables a manipulation of the growth rate along different facets of TiO{sub 2} nanoparticles and, consequently, a control of the aspect ratio of these nanoparticles. Moreover, the photocatalytic degradation rate of methyl blue for sample prepared with molar ratio of oleic acid to oleylamine at 6:24 is over 11% higher than that for the other samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2017

Exploring an Ensemble-Based Approach to Atmospheric Climate Modeling and Testing at Scale

A strict throughput requirement has placed a cap on the degree to which we can depend on the execution of single, long, fine spatial grid simulations to explore global atmospheric climate behavior. Alternatively, running an ensemble of short simulations is computationally more efficient. We test the null hypothesis that the climate statistics of a full-complexity atmospheric model derived from an ensemble of independent short simulation is equivalent to that from an equilibrated long simulation. The climate of short simulation ensembles is statistically distinguishable from that of a long simulation in terms of the distribution of global annual means, largely due to the presence of low-frequency atmospheric intrinsic variability in the long simulation. We also find that model climate statistics of the simulation ensemble are sensitive to the choice of compiler optimizations. While some answer-changing optimization choices do not effect the climate state in terms of mean, variability and extremes, aggressive optimizations can result in significantly different climate states.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2015

Customer economics of residential photovoltaic systems: Sensitivities to changes in wholesale market design and rate structures

We report that the customer economics of U.S. residential photovoltaics (PV) often depend on retail electricity rates, because most utilities compensate customer-sited PV generation via net metering. The future bill savings from net metering are uncertain and dependent on retail rate structures, wholesale market design, and renewable penetration levels, among other factors. We explore the impact of the following assumptions on the bill savings from residential PV: a wholesale electricity market design with a price cap (as opposed to an energy-only market); a retail rate with a fixed customer charge (as opposed to a fully volumetric rate); and increasing-block pricing (as opposed to a non-varying flat rate). A wholesale price cap can dampen the expected bill-savings erosion due to moving from a low to a high renewables scenario for customers with time-varying rates and net metering. Moving from a fully volumetric rate to a two-part tariff rate with a fixed customer charge could severely Erode the bill savings under net metering, because PV generation could only displace the (reduced) volumetric portion of the rate. Lastly, increasing-block pricing might have an even greater impact on the bill savings from behind-the-meter PV than the other uncertainties explored in this paper.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2019

Regulating TNCs: Should Uber and Lyft set their own rules?

We evaluate the impact of three proposed regulations of transportation network companies (TNCs) like Uber, Lyft and Didi: (1) A minimum wage for drivers, (2) a cap on the number of drivers or vehicles, and (3) a per-trip congestion tax. The impact is assessed using a queuing theoretic equilibrium model which incorporates the stochastic dynamics of the app-based ride-hailing matching platform, the ride prices and driver wages established by the platform, and the incentives of passengers and drivers. We show that a floor placed under driver earnings can push the ride-hailing platform to hire more drivers and offer more rides, at the same time that passengers enjoy faster rides and lower total cost, while platform rents are reduced. Contrary to standard competitive labor market theory, enforcing a minimum wage for drivers benefits both drivers and passengers, and promotes the efficiency of the entire system. This surprising outcome holds for almost all model parameters, and it occurs because the wage floor curbs TNC labor market power. In contrast to a wage floor, imposing a cap on the number of vehicles hurts drivers, because the platform reaps all the benefits of limiting supply. The congestion tax has the expected impact: fares increase, wages and platform revenue decrease. Here, we also construct variants of the model to briefly discuss platform subsidy, platform competition, and autonomous vehicles.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Growth and characterization of uranium oxide thin films deposited by polymer assisted deposition

A thin film of uranium oxide was deposited by polymer assisted deposition on a single crystal lanthanum aluminate - strontium aluminum tantalate substrate. The deposition resulted in formation of epitaxial thin film of uranium oxide, which could be attributed to α-U 3 O 8 or α-UO 3 . X-ray diffraction revealed preferential orientation along (100) in case of α-U 3 O 8 or (001) for α-UO 3 for the thin film. A combination of x-ray and neutron reflectometry proved the sample to be α-U 3 O 8 . Furthermore, the film was of 17 nm thickness covered by a capping layer. The less dense capping layer could be a manifestation of surface water adsorbed on the sample.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Global reverse supply chain design for solid waste recycling under uncertainties and carbon emission constraint

Highlights: • We propose a robust model for global reverse supply chain design. • The uncertain waste collection rate, currency exchange rate, and the maritime cost are incorporated. • The total emission and cost are affected by both the uncertainties and the global carbon cap. • The waste products flows between countries vary with the levels of uncertainties and the global carbon cap. • There is an opportunity to reduce the maritime emission. - Abstract: The emergence of concerns over environmental protection, resource conservation as well as the development of logistics operations and manufacturing technology has led several countries to implement formal collection and recycling systems of solid waste. Such recycling system has the benefits of reducing environmental pollution, boosting the economy by creating new jobs, and generating income from trading the recyclable materials. This leads to the formation of a global reverse supply chain (GRSC) of solid waste. In this paper, we investigate the design of such a GRSC with a special emphasis on three aspects; (1) uncertainty of waste collection levels, (2) associated carbon emissions, and (3) challenges posed by the supply chain’s global aspect, particularly the maritime transportation costs and currency exchange rates. To the best of our knowledge, this paper is the first attempt to integrate the three above-mentioned important aspects in the design of a GRSC. We have used mixed integer-linear programming method along with robust optimization to develop the model which is validated using a sample case study of e-waste management. Our results show that using a robust model by taking the complex interactions characterizing global reverse supply chain networks into account, we can create a better GRSC. The effect of uncertainties and carbon constraints on decisions to reduce costs and emissions are also shown.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2017

Conversion of biowastes to biomaterial: An innovative waste management approach

Highlights: • Study demonstrates that hydroxyapatite can be potentially produced from biowastes. • Eggshells and synthetic urine was used for hydroxyapatite synthesis. • Solution pH and stirring influenced hydroxyapatite formation. - Abstract: The study suggests that biowastes (eggshells and urine) can be potentially used as precursors to produce hydroxyapatite (HAp) biomaterial in a simple chemical process. A batch reactor was used in this work to produce HAp powder from eggshells and synthetic urine (SU). Fine powder of calcined eggshells was dissolved in water to produce aqueous calcium hydroxide. The solution was then mixed with concentrated SU in stoichiometric amounts corresponding to HAp (Ca/P molar ratio ∼ 1.67). The initial pH of the solution was alkaline (pH ∼ 8.5) and particles formed rapidly with slight mixing. Stirring the turbid solution for a longer period (72 h) did not show any visual change, but the particle size decreased slightly. When the pH of the solution was adjusted to 5, the solution was initially clear, but particle formation was apparent after 48 h stirring. It was noticed that at a slow stirring speed (100 rpm), film formation occurred on the solution, whereas at a higher stirring speed (500 rpm) no such film formation was observed. X-ray diffraction (XRD) analysis confirmed that the particles (formed at 500 rpm) were an amorphous calcium phosphate (CaP). Alkaline treatment at 80 °C for 2 h converted the amorphous CaP into HAp. Inductively coupled plasma mass spectrometry (ICP-MS) analysis of the particles (formed at 500 rpm) suggested that they are calcium-deficient HAp (Ca/P molar ratio 1.58).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2017

Structural and Biophysical Characterization of the Mycobacterium tuberculosis Protein Rv0577, a Protein Associated with Neutral Red Staining of Virulent Tuberculosis Strains and Homologue of the Streptomyces coelicolor Protein KbpA

The 261-residue Mycobacterium tuberculosis protein Rv0577 is a prominent antigen in tuberculosis patients, the responsible component for neutral red staining of virulent strains of M. tuberculosis, a putative component in a methylglyoxal detoxification pathway, and an agonist of toll-like receptor 2. It also has 36% sequence identity to AfsK-binding protein A (KbpA), a component in the complex secondary metabolite pathways in the Streptomycetes genus from which many commercial antibiotics are derived. To gain insight into the biological function of Rv0577 and the family of KpbA kinase regulators, the crystal structure for Rv0577 was determined to a resolution of 1.75 Å (3OXH), binding properties with neutral red and deoxyadenosine (Ado) surveyed, backbone dynamics measured, and thermal stability assayed by CD spectroscopy. The protein is composed of four approximate repeats with an topology arranged radially in consecutive pairs to form two continuous eight-strand -sheets capped on both ends with an -helix. The two -sheets intersect in the center at roughly a right angle and form an asymmetric deep “saddle” on both sides of the protein, saddle one (P11 to A129) and saddle two (L143 to A258), that may serve to bind ligands. NMR chemical shift perturbation experiments show that neutral red binds to Rv0577, further cementing the role of Rv0577 in the neutral red staining of virulent strains of M. tuberculosis. Similar experiments show that adenosine also bind to Rv0577, although less tightly, with estimated dissociation constants of 4.1 ± 0.3 mM for saddle one and > 1 M for saddle two. Heteronuclear steady-state {1H}-15N NOE, T1, and T2 values were generally uniform through-out the sequence with only a few modest pockets of differences suggestive of slightly different motion in loops between -strands in saddle 1. Circular dichroism spectroscopy characterization of the thermal stability of Rv0577 indicated irreversible unfolding upon heating with an estimated melting temperature of 56 °C. While it is not known if Rv0577 has a kinase regulatory role similar to its Streptomyces homolog KbpA, protein kinase and phosphatase signaling help M. tuberculosis adapt to the hostile host environment during infections. Consequently, new anti-tuberculosis drugs targeting Rv0577 may act by interfering with multiple mechanisms; a potential signaling machinery as well as toll-like receptor 2 activation and the methylglyoxal detoxification pathway.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2017

Minor Impact of Ligand Shell Steric Profile on Colloidal Nanocarbon Catalysis

The catalytic activity of a colloidal nanoparticle is typically inhibited by the very capping agents that are required to maintain colloidal stability and catalyst dispersion. Yet, the relative importance of steric contributions to the observed attenuation in catalytic activity is poorly understood. In this work, we prepare colloidal graphitic carbon nanoparticles featuring covalent amide linkages to aliphatic surface capping agents of varying length. Using aerobic benzylamine oxidation as a test reaction, we find that the steric profile of the ligand shell plays a negligible role in suppressing catalytic activity relative to chemisorption interactions that alter the surface chemistry of the catalyst. The work indicates that heterostructured nanoparticles that provide distinct surface sites for ligand binding and substrate activation should allow for high colloidal stability and robust catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Tunable Room-Temperature Synthesis of Coinage Metal Chalcogenide Nanocrystals from N -Heterocyclic Carbene Synthons

Here we present a new toolset of precursors for semiconductor nanocrystal synthesis, N-heterocyclic carbene (NHC)-metal halide complexes, which enables a tunable molecular platform for the preparation of coinage metal chalcogenide quantum dots (QDs). Phase-pure and highly monodisperse coinage metal chalcogenide (Ag 2 E, Cu 2-x E; E = S, Se) QDs are readily synthesized from the direct reaction of an NHC-MBr synthon (where M = Ag, Cu) with alkylsilyl chalcogenide reagents at room temperature. We demonstrate that the size of the resulting QDs is well tailored by the electron-donating ability of the L-type NHC ligands, which are further confirmed to be the only organic capping ligands on the QD surface, imparting excellent colloidal stability. Local superstructures of the NHC-capped Ag 2 S QDs are observed by TEM, further demonstrating their potential for synthesizing monodisperse ensembles and mediating self-assembly.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Energetics of Cu Adsorption on and Adhesion to Rutile-TiO 2 (100) Studied by Cu Vapor Adsorption Calorimetry

The heat of adsorption of Cu vapor versus coverage was measured on rutile-TiO 2 (100) at 300 and 100 K using single-crystal adsorption calorimetry. At these conditions, Cu nanoparticles nucleate and then grow larger. The average Cu particle size versus Cu coverage was measured using He + low-energy ion scattering spectroscopy. These data were analyzed with the recently introduced spherical cap model (SCM) to provide the heat of Cu adsorption and Cu chemical potential versus Cu particle size, as well as the contact angle (67°) and adhesion energy (2.50 J/m 2 ) at the Cu particle/rutile-TiO 2 (100) interface. The hemispherical cap model (HCM) was used to model the data first, and then those HCM results were converted to the more accurate SCM results using a recently published mathematical approximation whose high accuracy was validated here. Furthermore, the adhesion energy of Cu on rutile-TiO 2 (100) measured here is compared to prior values for Ag and Au on rutile-TiO 2 (100), showing a nearly proportional increase in adhesion energy with metal oxophilicity (per unit area).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Synthesis of 1 nm Pd Nanoparticles in a Microfluidic Reactor: Insights from in Situ X ray Absorption Fine Structure Spectroscopy and Small-Angle X ray Scattering

In this paper we show that the temporal separation of nucleation and growth is not a necessary condition for the colloidal synthesis of monodisperse nanoparticles. The synthesis mechanism of Pd nanoparticles was determined by in situ XAFS and SAXS in a microfluidic reactor capable of millisecond up to an hour time resolution. The SAXS results showed two autocatalytic growth phases, a fast growth phase followed by a very slow growth phase. The steady increase in the number of particles throughout the two growth phases indicates the synthesis is limited by slow continuous nucleation. The transition from fast to slow growth was caused by rapid increase in bonding with the capping agent as shown by XAFS. Based on this fundamental understanding of the synthesis mechanism, we show that 1 nm monodisperse Pd nanoparticles can be synthesized at low temperature using a strong binding capping agent such as trioctylphosphine (TOP).

Environmental Molecular Sciences Laboratory↗
DOE OSTI2018

Recovery of Active and Efficient Photocatalytic H 2 Production for CdSe Quantum Dots

Recently, colloidal semiconductor quantum dots (QDs) have shown great promise as photocatalysts for the production of chemical fuels by sunlight. Here, the efficiency of photocatalytic hydrogen (H 2 ) production for integrated systems of large diameter (4.4 nm) CdSe QDs as light harvesting nanoparticles with varying concentrations of nickel-dihydrolipoic acid (Ni-DHLA) small molecule catalysts was measured. While exhibiting excellent robustness and longevity, the efficiency of H 2 production for equimolar catalyst and QDs was relatively poor. However, the efficiency was found to increase substantially with increasing Ni-DHLA:QD molar ratios Surprisingly, this high activity was only observed with the use of 3-mercaptopropionic acid (MPA) ligands, while CdSe QDs capped with dihydrolipoic acid (DHLA) exhibited poor performance in comparison, indicating that the QD capping ligand has a substantial impact on the catalytic performance. Finally, ultrafast transient absorption spectroscopic measurements of the electron transfer (ET) dynamics show fast ET to the catalyst. Importantly, an increase in ET efficiency is observed as the catalyst concentration is increased. Together, these results suggest that for these large QDs, tailoring the QD surface environment for facile ET and increasing catalyst concentrations increases the probability of ET from QDs to Ni-DHLA, overcoming the relatively small driving force for ET and decreased surface electron density for large diameter QDs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Induced Chirality in QDs Using Thermoresponsive Elastin-like Polypeptides

Circular dichroism (CD) spectroscopy has emerged as a potent tool for probing chiral small-molecule ligand exchange on natively achiral quantum dots (QDs). In this study, we report a novel approach to identifying QD–biomolecule interactions by inducing chirality in CdS QDs using thermoresponsive elastin-like polypeptides (ELPs) engineered with C-terminal cysteine residues. Our method is based on a versatile two-step ligand exchange process starting from monodisperse oleate-capped QDs in nonpolar media and proceeding through an easily accessed achiral glycine-capped QD intermediate. Successful conjugation of the ELPs onto the QDs is confirmed by the diagnostic CD response corresponding to the QD electronic transitions in the visible range. The resulting ELP:CdS conjugates demonstrate thermally reversible coacervation, as observed through dynamic light scattering, small-angle X-ray scattering, and electron microscopy. Furthermore, this research provides a foundation for using induced chirality in QD electronic transitions to probe QD conjugation to complex peptides and proteins, opening pathways for designing dynamic, stimuli-responsive hybrid nanomaterials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ultrasensitive Sub-monolayer Palladium Induced Chirality Switching and Topological Evolution of Skyrmions

Chiral spin textures are fundamentally interesting, with promise for device applications. Stabilizing chirality is conventionally achieved by introducing Dzyaloshinskii-Moriya interaction (DMI) in asymmetric multilayers, where the thickness of each layer is at least a few monolayers. Here we report an ultrasensitive chirality switching in (Ni/Co) n multilayer induced by capping with only 0.22 monolayer of Pd. Using spin-polarized low-energy electron microscopy, we monitor the gradual evolution of domain walls from left-handed to right-handed Néel walls and quantify the DMI induced by the Pd capping layer. We also observe the chiral evolution of a skyrmion during the DMI switching, where no significant topological protection is found as the skyrmion winding number varies. This corresponds to a minimum energy cost of <1 attojoule during the skyrmion chirality switching. Here, our results demonstrate the detailed chirality evolution within skyrmions during the DMI sign switching, which is relevant to practical applications of skyrmionic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗