Search NASA⌕ Search

SEARCH · Search NASA

Results for “Curved Structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Development of the multi-purpose Cologne Compact Differential Plunger (CoCoDiff) for the measurement of nuclear level lifetimes with the Recoil Distance Doppler-shift method

Here, a new 3-foil plunger device, the Cologne Compact Differential (CoCoDiff) plunger has been built and commissioned. Due to its compact size, it can be used together with many different spectrometers and auxiliary detectors. As a commissioning experiment, level lifetimes of the $2^{+}_{1}$ and the $4^{+}_{1}$ excited states of 50 Cr have been measured, using the Differential Decay Curve method (DDCM). A derivation is given on how this method can be applied to a differential plunger measurement, in order to measure distances for lifetimes from two different regions of sensitivity at the same time. The commissioning experiment took place at the Cologne FN tandem accelerator, using the reaction 24 Mg( 32 S,4p2n) 50 Cr. Lifetimes, deduced from this measurement, agree well with literature values from earlier measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Identification of the molecular-weight growth reaction network in counterflow flames of the C 3 H 4 isomers allene and propyne

The reaction networks responsible for aromatics formation in counterflow flames of the C 3 H 4 isomers allene and propyne are identified through a combined experimental and modeling study. Mole fraction profiles of near-atmospheric pressure (933 mbar) diffusion flames fueled by the C 3 H 4 isomers are analyzed by means of a newly assembled, chemically detailed kinetic mechanism. The experiment consists of a counterflow burner system that is coupled to a high-resolution time-of-flight molecular-beam mass spectrometer with single-photon ionization via synchrotron-generated vacuum-ultraviolet photons. Flame-sampled, mass-specific photoionization efficiency curves are used to identify the presence of aliphatically substituted aromatic species in addition to the commonly considered pericondensed ring structures. The new mechanism describes the formation and growth of aromatics through repetitive sequences of radical–radical and radical–molecule reactions that include C 1 6 intermediates. Higher concentrations of aromatic species are observed in the allene flame and the new mechanism captures the observed experimental trends very accurately. The results indicate the importance of the aliphatically substituted aromatics and of ring-enlargement reactions for the growth reactions. According to the model simulations, radical+radical recombination and PAH-radical+molecule reactions play an important role in PAH growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observations of modal coupling due to bolted joints in an experimental benchmark structure

The goal of this paper is to present a set of measurements from a benchmark structure containing two bolted joints to support future efforts to predict the damping due to the joints and to model nonlinear coupling between the first two elastic modes. Bolted joints introduce nonlinearities in structures, typically causing a softening in the natural frequency and an increase in damping because of frictional slip between the contact interfaces within the joint. These nonlinearities pose significant challenges when characterizing the response of the structure under a large range of load amplitudes, especially when the modal responses become coupled, causing the effective damping and natural frequency to not only depend on the excitation amplitude of the targeted mode, but also the relative amplitudes of other modes. In this work, two nominally identical benchmark structures, known in some prior works as the S4 beam, are tested to characterize their nonlinear properties for the first two elastic modes. Detailed surface measurements are presented and validated through finite element analysis and reveal distinct contact interactions between the two sets of beams. The free-free test structures are excited with an impact hammer and the transient response is analyzed to extract the damping and frequency backbone curves. A range of impact amplitudes and drive points are used to isolate a single mode or to excite both modes simultaneously. Differences in the nonlinear response correlate with the relative strength of the modes that are excited, allowing one to characterize mode coupling. Each of the beams shows different nonlinear properties for each mode, which is attributed to the different contact pressure distributions between the parts, although the mode coupling relationship is found to be consistent between the two. Lastly, the test data key finding are presented in this paper and the supporting data is available on a public repository for interested researchers.

42 ENGINEERING↗

Understanding How Ligand Functionalization Influences CO2 and N2 Adsorption in a Sodalite Metal–Organic Framework

In this work, a detailed study is conducted to understand how ligand substitution influences the CO2 and N2 adsorption properties of two highly crystalline sodalite metal–organic frameworks (MOFs) known as Cu–BTT (BTT–3 = 1,3,5-benzenetristetrazolate) and Cu–BTTri (BTTri–3 = 1,3,5-benzenetristriazolate). The enthalpy of adsorption and observed adsorption capacities at a given pressure are significantly lower for Cu–BTTri compared to its tetrazole counterpart, Cu–BTT. In situ X-ray and neutron diffraction, which allow visualization of the CO2 and N2 binding sites on the internal surface of Cu–BTTri, provide insights into understanding the subtle differences. As expected, slightly elongated distances between the open Cu2+ sites and surface-bound CO2 in Cu–BTTri can be explained by the fact that the triazolate ligand is a better electron donor than the tetrazolate. The more pronounced Jahn–Teller effect in Cu–BTTri leads to weaker guest binding. The results of the aforementioned structural analysis were complemented by the prediction of the binding energies at each CO2 and N2 adsorption site by density functional theory calculations. In addition, variable temperature in situ diffraction measurements shed light on the fine structural changes of the framework and CO2 occupancies at different adsorption sites as a function of temperature. Finally, simulated breakthrough curves obtained for both sodalite MOFs demonstrate the materials’ potential performance in dry postcombustion CO2 capture. The simulation, which considers both framework uptake capacity and selectivity, predicts better separation performance for Cu–BTT. The information obtained in this work highlights how ligand substitution can influence adsorption properties and hence provides further insights into the material optimization for important separations.

adsorption capacities↗

Adsorption Mechanisms of Glyphosate on Ferrihydrite: Effects of Al Substitution and Aggregation State

Ferrihydrite is one of the most reactive iron (Fe) (oxyhydr)oxides in soils, but the adsorption mechanisms of glyphosate, the most widely used herbicide, on ferrihydrite remain unknown. Here, we determined the adsorption mechanisms of glyphosate on pristine and Al-substituted ferrihydrites with aggregated and dispersed states using macroscopic adsorption experiments, zeta potential, phosphorus K-edge X-ray absorption near-edge structure spectroscopy, in situ attenuated total reflectance Fourier transform infrared spectroscopy coupled with two-dimensional correlation spectroscopy, and multivariate curve resolution analyses. Aggregation of ferrihydrite decreases the glyphosate adsorption capacity. The partial substitution of Al in ferrihydrite inhibits glyphosate adsorption on aggregated ferrihydrite due to the decrease of external specific surface area, while it promotes glyphosate adsorption on dispersed ferrihydrite, which is ascribed to the increase of surface positive charge. Glyphosate predominately forms protonated and deprotonated, depending on the sorption pH, monodentate-mononuclear complexes (MMH 1 /MMH 0 , 77-90%) on ferrihydrites, besides minor deprotonated bidentate-binuclear complexes (BBH 0 , 23-10%). Both Al incorporation and a low pH favor the formation of the BB complex. The adsorbed glyphosate preferentially forms the MM complex on ferrihydrite and preferentially bonds with the Al-OH sites on Al-substituted ferrihydrite. In conclusion, these new insights are expected to be useful in predicting the environmental fate of glyphosate in ferrihydrite-rich environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanoparticle-Induced Disorder at Complex Liquid–Liquid Interfaces: Effects of Curvature and Compositional Synergy on Functional Surfaces

The self-assembly of surfactant monolayers at interfaces plays a sweeping role in tasks ranging from household cleaning to the regulation of the respiratory system. The synergy between different nanoscale species at an interface can yield assemblies with exceptional properties, which enhance or modulate their function. However, understanding the mechanisms underlying coassembly, as well as the effects of intermolecular interactions at an interface, remains an emerging and challenging field of study. Herein, we study the interactions of gold nanoparticles striped with hydrophobic and hydrophilic ligands with phospholipids at a liquid–liquid interface and the resulting surface-bound complexes. We show that these nanoparticles, which are themselves minimally surface active, have a direct concentration-dependent effect on the rapid reduction of tension for assembling phospholipids at the interface, implying molecular coassembly. Through the use of sum frequency generation vibrational spectroscopy, we reveal that nanoparticles impart structural disorder to the lipid molecular layers, which is related to the increased volumes that amphiphiles can sample at the curved surface of a particle. The results strongly suggest that hydrophobic and electrostatic attractions imparted by nanoparticle functionalization drive lipid–nanoparticle complex assembly at the interface, which synergistically aids lipid adsorption even when lipids and nanoparticles approach the interface from opposite phases. The use of tensiometric and spectroscopic analyses reveals a physical picture of the system at the nanoscale, allowing for a quantitative analysis of the intermolecular behavior that can be extended to other systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gaussian approximation potentials for accurate thermal properties of two-dimensional materials

Two-dimensional materials (2DMs) continue to attract a lot of attention, particularly for their extreme flexibility and superior thermal properties. Molecular dynamics simulations are among the most powerful methods for computing these properties, but their reliability depends on the accuracy of interatomic interactions. While first principles approaches provide the most accurate description of interatomic forces, they are computationally expensive. In contrast, classical force fields are computationally efficient, but have limited accuracy in interatomic force description. Machine learning interatomic potentials, such as Gaussian Approximation Potentials, trained on density functional theory (DFT) calculations offer a compromise by providing both accurate estimation and computational efficiency. Here, in this work, we present a systematic procedure to develop Gaussian approximation potentials for selected 2DMs, graphene, buckled silicene, and h-XN (X = B, Al, and Ga, as binary compounds) structures. We validate our approach through calculations that require various levels of accuracy in interatomic interactions. The calculated phonon dispersion curves and lattice thermal conductivity, obtained through harmonic and anharmonic force constants (including fourth order) are in excellent agreement with DFT results. HIPHIVE calculations, in which the generated GAP potentials were used to compute higher-order force constants instead of DFT, demonstrated the first-principles level accuracy of the potentials for interatomic force description. Molecular dynamics simulations based on phonon density of states calculations, which agree closely with DFT-based calculations, also show the success of the generated potentials in high-temperature simulations.

2D Materials↗

Size dependent bandgap of molecular beam epitaxy grown InN quantum dots measured by scanning tunneling spectroscopy

InN quantum dots (QDs) were grown on Si (111) by epitaxial Stranski-Krastanow growth mode using plasma-assisted molecular beam epitaxy. Single-crystalline wurtzite structure of InN QDs was verified by the x-ray diffraction and transmission electron microscopy. Scanning tunneling microscopy has been used to probe the structural aspects of QDs. A surface bandgap of InN QDs was estimated from scanning tunneling spectroscopy (STS) I-V curves and found that it is strongly dependent on the size of QDs. The observed size-dependent STS bandgap energy shifts with diameter and height were theoretical explained based on an effective mass approximation with finite-depth square-well potential model.

36 MATERIALS SCIENCE↗

Room temperature dielectric and magnetic properties of Gd and Ti co-doped BiFeO{sub 3} ceramics

Room temperature dielectric and magnetic properties of BiFeO{sub 3} samples, co-doped with magnetic Gd and non-magnetic Ti in place of Bi and Fe, respectively, were reported. The nominal compositions of Bi{sub 0.9}Gd{sub 0.1}Fe{sub 1–x}Ti{sub x}O{sub 3} (x = 0.00-0.25) ceramics were synthesized by conventional solid state reaction technique. X-ray diffraction patterns revealed that the substitution of Fe by Ti induces a phase transition from rhombohedral to orthorhombic at x > 0.20. Morphological studies demonstrated that the average grain size was reduced from ∼1.5 μm to ∼200 nm with the increase in Ti content. Due to Ti substitution, the dielectric constant was stable over a wide range of high frequencies (30 kHz to 20 MHz) by suppressing the dispersion at low frequencies. The dielectric properties of the compounds are associated with their improved morphologies and reduced leakage current densities probably due to the lower concentration of oxygen vacancies in the compositions. Magnetic properties of Bi{sub 0.9}Gd{sub 0.1}Fe{sub 1–x}Ti{sub x}O{sub 3} (x = 0.00-0.25) ceramics measured at room temperature were enhanced with Ti substitution up to 20% compared to that of pure BiFeO{sub 3} and Ti undoped Bi{sub 0.9}Gd{sub 0.1}FeO{sub 3} samples. The enhanced magnetic properties might be attributed to the substitution induced suppression of spiral spin structure of BiFeO{sub 3}. An asymmetric shifts both in the field and magnetization axes of magnetization versus magnetic field curves was observed. This indicates the presence of exchange bias effect in these compounds notably at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic properties of Nd-Ga-Fe{sub bal}-Nb-B alloy

Here, we have synthesized Nd-Ga-Fe{sub bal}-Nb-B alloy by strip casting method. The crystalline and magnetic properties of sample were investigated with x-ray diffractometer (XRD), vibrating sample magnetometer (VSM), and Mössbauer spectrometer. The XRD pattern was analyzed with the Rietveld refinement method, indicating a tetragonal structure and the space group of P4{sub 2}/mnm. The temperature dependence of zero-field cooled (ZFC) magnetization curve was measured under applied field at temperature ranging from 4.2 to 740 K. From the ZFC curve, Curie temperature and spin reorientation temperature are determined to be 615 K and 130 K, respectively. Also, Mössbauer spectra were measured at various temperatures ranging from 4.2 to 620 K. Each spectrum was fitted with 6-sextets for Fe site (8j{sub 1}, 8j{sub 2}, 16k{sub 1}, 16k{sub 2}, 4c, and 4e), and magnetic hyperfine field, Isomer shift, electric quadrupole shift, and area ratio values were obtained from the fit. We observed the change in slope of magnetic hyperfine field and electric quadrupole shift at 130 K while the Curie temperature was determined to be 615 K from the measurement of zero velocity counter, agreeing with the values obtained from VSM measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of current-voltage characteristics of ferromagnetic α-Fe{sub 1.64}Ga{sub 0.36}O{sub 3} oxide under magnetic fields

We report the influence of magnetic field on I-V characteristics of α-Fe{sub 1.64}Ga{sub 0.36}O{sub 3} sample. Synchrotron X-ray diffraction pattern and Raman Spectroscopy have confirmed rhombohedral structure with space group R3C in the sample. The sample exhibits ferromagnetic feature at room temperature and non saturation of magnetization up to 7Tesla suggests the effect of non-collinear structure (canting) of the spins on the ferromagnetic properties. We have recorded I-V characteristics of the sample under magnetic field to study the effect of non-collinear spin structure on the electrical properties. Space charge limited current mechanism controlled the nature of non-linear I-V curves and the curves are significantly affected by magnetic field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Zonostrophic instability driven by discrete particle noise

The consequences of discrete particle noise for a system possessing a possibly unstable collective mode are discussed. It is argued that a zonostrophic instability (of homogeneous turbulence to the formation of zonal flows) occurs just below the threshold for linear instability. The scenario provides a new interpretation of the random forcing that is ubiquitously invoked in stochastic models such as the second-order cumulant expansion or stochastic structural instability theory; neither intrinsic turbulence nor coupling to extrinsic turbulence is required. A representative calculation of the zonostrophic neutral curve is made for a simple two-field model of toroidal ion-temperature-gradient-driven modes. To the extent that the damping of zonal flows is controlled by the ion-ion collision rate, the point of zonostrophic instability is independent of that rate. Published by AIP Publishing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental and numerical analysis of the performance and wake of a scale–model horizontal axis marine hydrokinetic turbine

Here, this paper presents an experimental and numerical study of a scale-model Horizontal Axis Hydrokinetic Turbine (HAHT). The model turbine is based on the U.S. Department of Energy Reference Model 1 (RM1), with the blade geometry modified to reproduce the design C p –TSR performance curve of the RM1 at the flume scale Reynolds numbers (5 × 10 4 –10 × 10 5 ). The performance and wake structure of a 45:1 scale turbine were measured using a load cell (torque applied on shaft) and a magnetic angular encoder (rotor rpm), and by planar particle image velocimetry, respectively. The details of the rotor flow field and three-dimensional wake evolution are analyzed from the numerical solution of the RANS equations solved around a computational model of the turbine. The comparison of experimental and numerical results highlights the strengths and limitations of the experimental and numerical analyses in the characterization of HAHT. Useful guidelines for developing experimental flume scale data and using them for validating numerical tools, as well as for performing a similar type of analysis and design validation of full scale devices as pilot projects start to go in the water in the United States, are provided.

13 HYDRO ENERGY↗

Ab initio investigation of Br-3d core-excited states in HBr and HBr + toward XUV probing of photochemical dynamics

Ultrafast X-ray/XUV transient absorption spectroscopy is a powerful tool for real-time probing of chemical dynamics. Interpretation of the transient absorption spectra requires knowledge of core-excited potentials, which necessitates assistance from high-level electronic-structure computations. In this study, we investigate Br-3d core-excited electronic structures of hydrogen bromide (HBr) using spin-orbit general multiconfigurational quasidegenerate perturbation theory (SO-GMC-QDPT). Potential energy curves and transition dipole moments are calculated from the Franck-Condon region to the asymptotic limit and used to construct core-to-valence absorption strengths for five electronic states of HBr ( 1 Σ 0 +, 3 Π 1 , 1 Π 1 , 3 Π 0 +, 3 Σ 1 ) and two electronic states of HBr+ ( 2 Π 3/2 , 2 Σ 1/2 ). The results illustrate the capabilities of Br-3d edge probing to capture transitions of the electronic-state symmetry as well as nonadiabatic dissociation processes that evolve across avoided crossings. Furthermore, core-to-valence absorption spectra are simulated from the neutral 1 Σ 0 + state and the ionic 2 Π 1/2,3/2 states by numerically solving the time-dependent Schrödinger equation and exhibit excellent agreement with the experimental spectrum. The comprehensive and quantitative picture of the core-excited states obtained in this work allows for transparent analysis of the core-to-valence absorption signals, filling gaps in the theoretical understanding of the Br-3d transient absorption spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of roughness, deterministic and random errors in film thickness on the reflecting properties of aperiodic mirrors for the EUV range

By the example of three aperiodic multilayer Mo/Si mirrors (AMM) for the wavelength ranges 17–21 nm, 24–29 nm, and 28–33 nm we have studied numerically the effect of the linearly determinisctic and random fluctuations of the film thickness and the interlayer roughness on the spectral dependences of the reflection coefficient. The simulation results are used to solve the inverse problem of reconstructing the interlayer roughness and the thickness of individual films from the measured dependences of the extreme UV radiation reflection coefficients. It is shown that the 'asymmetry' of the boundaries affects the magnitude and slope of the reflection coefficient plateau. Random fluctuations of the film thickness with the variance of 1%–2% weakly influence the reflection characteristics of AMMs and allow reliable reconstruction of the thickness of individual films. The fluctuations with the variance 8%–10% allow the estimation of individual thicknesses, but the reflection curve in this case strongly differs from the desirable one. Larger fluctuations do not allow the reconstruction of the AMM structure. The basic criteria for high-quality AMM synthesis are formulated. (extreme laser radiation: physics and fundamental applications)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

THE SIZES OF THE X-RAY AND OPTICAL EMISSION REGIONS OF RXJ 1131-1231

We use gravitational microlensing of the four images of the z = 0.658 quasar RXJ 1131-1231 to measure the sizes of the optical and X-ray emission regions of the quasar. The (face-on) scale length of the optical disk at rest frame 400 nm is R{sub l}ambda{sub ,O} = 1.3 x 10{sup 15} cm, while the half-light radius of the rest frame 0.3-17 keV X-ray emission is R{sub 1/2,X} = 2.3 x 10{sup 14} cm. The formal uncertainties are factors of 1.6 and 2.0, respectively. With the exception of the lower limit on the X-ray size, the results are very stable against any changes in the priors used in the analysis. Based on the Hbeta line width, we estimate that the black hole mass is M{sub 1131} approx = 10{sup 8} M{sub sun}, which corresponds to a gravitational radius of r{sub g} approx = 2 x 10{sup 13} cm. Thus, the X-ray emission is emerging on scales of approx10r{sub g} and the 400 nm emission on scales of approx70r{sub g} . A standard thin disk of this size should be significantly brighter than observed. Possible solutions are to have a flatter temperature profile or to scatter a large fraction of the optical flux on larger scales after it is emitted. While our calculations were not optimized to constrain the dark matter fraction in the lens galaxy, dark matter-dominated models are favored. With well-sampled optical and X-ray light curves over a broad range of frequencies, there will be no difficulty in extending our analysis to completely map the structure of the accretion disk as a function of wavelength.

79 ASTRONOMY AND ASTROPHYSICS↗

SDSS J123813.73 - 033933.0: A CATACLYSMIC VARIABLE EVOLVED BEYOND THE PERIOD MINIMUM

We present infrared JHK photometry of the cataclysmic variable (CV) SDSS J123813.73 - 033933.0 and analyze it along with optical spectroscopy, demonstrating that the binary system is most probably comprised of a massive white dwarf with T{sub eff} = 12000 +- 1000 K and a brown dwarf of spectral type L4. The inferred system parameters suggest that this system may have evolved beyond the orbital period minimum and is a bounce-back system. SDSS J123813.73 - 033933.0 stands out among CVs by exhibiting the cyclical variability that Zharikov et al. called brightenings. These are not related to specific orbital phases of the binary system and are fainter than dwarf novae outbursts that usually occur on longer timescales. This phenomenon has not been observed extensively and, thus, is poorly understood. The new time-resolved, multi-longitude photometric observations of SDSS J123813.73 - 033933.0 allowed us to observe two consecutive brightenings and to determine their recurrence time. The period analysis of all observed brightenings during 2007 suggests a typical timescale that is close to a period of {approx}9.3 hr. However, the brightenings modulation is not strictly periodic, possibly maintaining coherence only on timescales of several weeks. The characteristic variability with double orbital frequency that clearly shows up during brightenings is also analyzed. The Doppler mapping of the system shows the permanent presence of a spiral arm pattern in the accretion disk. A simple model is presented to demonstrate that spiral arms in the velocity map appear at the location and phase corresponding to the 2:1 resonance radius and constitute themselves as double-humped light curves. The long-term and short-term variability of this CV is discussed together with the spiral arm structure of an accretion disk in the context of observational effects taking place in bounce-back systems.

79 ASTRONOMY AND ASTROPHYSICS↗

CONSTRAINING PULSAR MAGNETOSPHERE GEOMETRY WITH {gamma}-RAY LIGHT CURVES

We demonstrate a method for quantitatively comparing {gamma}-ray pulsar light curves with magnetosphere beaming models. With the Fermi LAT providing many pulsar discoveries and high-quality pulsar light curves for the brighter objects, such a comparison allows greatly improved constraints on the emission zone geometry and the magnetospheric physics. Here we apply the method to Fermi LAT light curves of a set of bright pulsars known since EGRET or before. We test three approximate models for the magnetosphere structure and two popular schemes for the location of the emission zone, the two pole caustic model and the outer gap (OG) model. We find that OG models and relatively physical B fields approximating force-free dipole magnetospheres are preferred at high statistical significance. An application to the full LAT pulsar sample will allow us to follow the emission zone's evolution with pulsar spindown.

79 ASTRONOMY AND ASTROPHYSICS↗