Search NASA⌕ Search

SEARCH · Search NASA

Results for “Enhanced Sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Influence of Fluorine incorporation on the photocatalytic activity of Tin Oxide thin films

Highlights: • Fluorine doped SnO{sub 2} thin films prepared by a facile homemade jet nebulizer spray pyrolysis technique. • XRD, XPS, PL, FESEM, AFM studies support the discussions. • The photocatalytic activities of the prepared tin oxide (TO) and FTO thin films for the degradation of MB aqueous solution were tested. . - Abstract: This work reports the photocatalytic activity of undoped tin oxide (TO) and F doped tin oxide (FTO) thin films for MB dye degradation under visible light irradiation. A facile homemade jet nebulizer spray pyrolysis technique was employed to prepare these samples. The results indicate that FTO film exhibits superior photocatalytic activity compared to TO film. Dye degradation of nearly 95% is achieved using FTO film at 90 min whereas TO film degrades only 78% of dye molecules in the same time interval. This enhancement for FTO films might be due to the generation of large number of free electrons caused by the fluorine incorporation. The mechanism behind the enhancement of photocatalytic activity of FTO films is discussed elaborately with the aid of optical and PL studies. The structure, composition and morphology of the samples were analyzed using XRD, XPS, FTIR, FESEM and AFM. The incorporation of F into SnO{sub 2} lattice is confirmed through FTIR analysis.

36 MATERIALS SCIENCE↗

Chemical, Morphological, Structural, Optical, and Magnetic Properties of Transition Metal Titanium (Ti)-Doped LaFeO{sub 3} Nanoparticles

In the present work, pure and transition metal titanium (Ti)-doped LaFe{sub 1−x}Ti{sub x}O{sub 3}(x = 0.0, 0.2, 0.4, and 0.6) nanoparticles have been successfully synthesized by hydrothermal synthesis technique for various molar ratios of 0.2, 0.4, and 0.6. The prepared samples were grinned and annealed in furnace at 600 {sup ∘}C/4 h. The X-ray diffraction (XRD) analysis confirms the phase orthorhombic formation of LaFeO{sub 3} and Ti-doped LaFeO{sub 3}. The stoichiometric analysis was performed through energy-dispersive X-ray studies (EDX). The micro-structural features of surface morphology were examined by field emission scanning electron microscopy (FESEM). Further, surface nanocrystalline of the titanium (Ti)-doped LaFe{sub 1−x}Ti{sub x}O{sub 3} was also investigated through high-resolution transmission electron microscopic (TEM) analysis. The enhancement of room temperature magnetization value has been observed from the M–H curve which is measured using vibrating sample magnetometer (VSM).The weak ferromagnetic behavior was observed from hysteresis loop. From hysteresis loop, saturation takes place when the applied magnetic field intensity is 15 kO{sub e}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Tuning Internal Strain in Metal–Organic Frameworks via Vapor Phase Infiltration for CO 2 Reduction

Abstract A gas‐phase approach to form Zn coordination sites on metal–organic frameworks (MOFs) by vapor‐phase infiltration (VPI) was developed. Compared to Zn sites synthesized by the solution‐phase method, VPI samples revealed approximately 2.8 % internal strain. Faradaic efficiency towards conversion of CO 2 to CO was enhanced by up to a factor of four, and the initial potential was positively shifted by 200–300 mV. Using element‐specific X‐ray absorption spectroscopy, the local coordination environment of the Zn center was determined to have square‐pyramidal geometry with four Zn−N bonds in the equatorial plane and one Zn‐OH 2 bond in the axial plane. The fine‐tuned internal strain was further supported by monitoring changes in XRD and UV/Visible absorption spectra across a range of infiltration cycles. The ability to use internal strain to increase catalytic activity of MOFs suggests that applying this strategy will enhance intrinsic catalytic capabilities of a variety of porous materials.

Yang, Fan↗

Reverse martensitic transformation on the corrosion behavior of a 2304 lean duplex stainless steel

This study investigates the influence of the reverse martensitic transformation on the corrosion behavior of 2304 lean duplex stainless steel (LDSS) at low temperatures (400–600°C). The steel underwent cold rolling, followed by isochronal annealing for 0.5 h. Phase transformations and microstructures were analyzed using X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. Corrosion resistance was evaluated using a syringe cell with cyclic potentiodynamic polarization in 0.6 M NaCl solution and double-loop electrochemical potentiokinetic reactivation in 0.5 M H 2 SO 4 + 0.001 M KSCN solution. A bimodal breakdown potential behavior, associated with either pitting or transpassivity, was observed in the as-received (AR) and samples annealed at 400°C. Pitting in the AR sample was associated with Al–Mg–Si–Ca–O inclusions, while pitting on the samples annealed at 400°C was linked to local reduced passive film resistance. Severe cold rolling enhanced the pitting resistance of 2304 LDSS. Selective electrochemical etching revealed preferential corrosion at phase interfaces and within the austenite phase. Additionally, annealing at 500°C to 600°C led to a marked decrease in pitting resistance and increased sensitization. Electron backscatter diffraction analysis of the corroded pits in the annealed specimens indicated that pits tend to nucleate and grow in α'-martensite/austenite regions. Furthermore, the nanostructure formed during low-temperature reversion, characterized by dislocation-cell martensite with high dislocation density and stacking faults, may adversely affect corrosion resistance due to heterogeneities associated with alloying element redistribution.

36 MATERIALS SCIENCE↗

Lithium indium diselenide: A new scintillator for neutron imaging

Lithium indium diselenide, 6 LiInSe 2 or LISe, is a newly developed neutron detection material that shows both semiconducting and scintillating properties. The 24% atomic density of 6 Li yields a thermal neutron mean free path of only 920 μm. This paper reports on the performance of LISe crystals in scintillation mode for its potential use as a converter screen for thermal/cold neutron imaging. The spatial resolution of LISe, determined using a 10% value of the Modulation Transfer Function (MTF), was found to not scale linearly with thickness. Crystals having a thickness of 450 μm or larger resulted in an average spatial resolution of 67 μm, and the thinner crystals exhibited an increase in spatial resolution down to the Nyquist frequency of the CCD. The highest measured spatial resolution of 198 μm thick LISe (27 μm) outperforms a commercial 50 μm thick ZnS(Cu): 6 LiF scintillation screen (100 μm) by more than a factor of three. For the thicknesses considered in this study, it has been found that the light yield of LISe did not scale with its thickness, suggesting the need for optimizing the synthesis to enhance the scintillation mechanism. Absorption measurements indicate that the 6 Li concentration is uniform throughout the samples and its absorption efficiency as a function of thickness follows general nuclear theory, indicating that the variation in apparent brightness is likely due to a combination of particle escape, light transport, and activation of the scintillation mechanisms. As a result, the presence of 115 In and its long-lived 116 In activation product did not result in ghosting (memory of past neutron exposure), demonstrating potential for using LISe for imaging transient systems.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Soil bioassays as tools for sludge compost quality assessment

Composting is a waste management technology that is becoming more widespread as a response to the increasing production of sewage sludge and the pressure for its reuse in soil. In this study, different bioassays (plant germination, earthworm survival, biomass and reproduction, and collembolan survival and reproduction) were assessed for their usefulness in the compost quality assessment. Compost samples, from two different composting plants, were taken along the composting process, which were characterized and submitted to bioassays (plant germination and collembolan and earthworm performance). Results from our study indicate that the noxious effects of some of the compost samples observed in bioassays are related to the low organic matter stability of composts and the enhanced release of decomposition endproducts, with the exception of earthworms, which are favored. Plant germination and collembolan reproduction inhibition was generally associated with uncomposted sludge, while earthworm total biomass and reproduction were enhanced by these materials. On the other hand, earthworm and collembolan survival were unaffected by the degree of composting of the wastes. However, this pattern was clear in one of the composting procedures assessed, but less in the other, where the release of decomposition endproducts was lower due to its higher stability, indicating the sensitivity and usefulness of bioassays for the quality assessment of composts.

09 BIOMASS FUELS↗

Permeability Evolution and Frictional Stability of Fabricated Fractures With Specified Roughness

Roughness is widely observed on natural fractures, and its impact on the potential for induced seismicity and associated fluid migration in the subsurface remains unclear. Here we perform fracture shearing and fluid flow experiments on artificially fabricated fractures with specified roughness to investigate the role of fracture roughness on frictional properties and permeability evolution. Given the experimental conditions, we observe that rough fractures show high roughness ratio S q /L w and return higher frictional strength due to the presence of cohesive interlocking asperities. Rough fracture surfaces show velocity strengthening behavior in the initial shearing stage, which may evolve to velocity neutral and velocity weakening at greater displacements—suggesting a dynamic weakening that rough fractures become less stable with shearing. The surface roughness exerts a dominant control on permeability evolution over the entire shearing history. Permeability declines monotonically by about 2 orders of magnitude for smooth fractures. For high roughness fractures, the permeabilities evolve episodically due to cycled compaction and dilation during shearing. With a slip distance of 6 to 8 mm, permeability of the rough surface may enhance up to an order of magnitude, but significant permeability reduction may also occur for rough samples when asperities are highly worn with gouge clogging flow paths. However, there is no obvious correlation between permeability evolution and frictional behavior for rough fracture samples when fractures are subject to sudden sliding velocity changes.

58 GEOSCIENCES↗

Surface and bulk contribution to Cu(111) quantum efficiency

The quantum efficiency (QE) of Cu(111) is measured for different impinging light angles with photon energies just above the work function. We observe that the vectorial photoelectric effect, an enhancement of the QE due to illumination with light with an electric vector perpendicular to the sample surface, is stronger in the more surface sensitive regime. This can be explained by a contribution to photoemission due to the variation in the electromagnetic potential at the surface. The contributions of bulk and surface electrons can then be determined.

43 PARTICLE ACCELERATORS↗

Photothermal excitation and laser Doppler velocimetry of higher cantilever vibration modes for dynamic atomic force microscopy in liquid

The authors present an optically based method combining photothermal excitation and laser Doppler velocimetry of higher cantilever vibration modes for dynamic atomic force microscopy in liquid. The frequency spectrum of a silicon cantilever measured in water over frequencies ranging up to 10 MHz shows that the method allows us to excite and detect higher modes, from fundamental to fifth flexural, without enhancing spurious resonances. By reducing the tip oscillation amplitude using higher modes, the average tip-sample force gradient due to chemical bonds is effectively increased to achieve high-spatial-resolution imaging in liquid. The method's performance is demonstrated by atomic resolution imaging of a mica surface in water obtained using the second flexural mode with a small tip amplitude of 99 pm; individual atoms on the surface with small height differences of up to 60 pm are clearly resolved.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Visible light photocatalytic activity in nitrogen-doped TiO{sub 2} nanobelts

We present a comprehensive experimental and theoretical study of the electronic properties and photocatalytic activity of nitrogen-doped anatase TiO{sub 2} nanobelts. UV-visible spectra show enhanced absorption in the visible light range for nitrogen-doped nanobelts compared to the pristine sample. The nitrogen-doped nanobelts exhibit improved photocatalytic activity compared to the pristine sample upon visible light irradiation. Furthermore, the incorporation of nitrogen introduces localized states in the band gap.

36 MATERIALS SCIENCE↗

Infrared luminescence of Tm{sup 3+}/Yb{sup 3+} codoped lanthanum aluminum germanate glasses

Tm{sup 3+} doped and Tm{sup 3+}/Yb{sup 3+} codoped lanthanum aluminum germanate (LAG) glasses are prepared by melt-quenching method and characterized optically. Based on the measurement of absorption spectrum, Judd-Ofelt intensity parameters ({Omega}{sub 2},{Omega}{sub 4},{Omega}{sub 6}) are calculated. The radiation emission rates, branching ratios, and lifetimes of Tm{sup 3+} are calculated to evaluate the spectroscopic properties of Tm{sup 3+} in LAG glass. The infrared emission properties of the samples are investigated and the results show that the 1.8 {mu}m emission can be greatly enhanced by adding proper amount of Yb{sup 3+} under the excitation of 980 nm. The energy transfer processes of Yb{sup 3+}-Yb{sup 3+} and Yb{sup 3+}-Tm{sup 3+} are analyzed, and the results show that Yb{sup 3+} ions can transfer their energy to Tm{sup 3+} ions with high efficiency and large energy transfer coefficient.

36 MATERIALS SCIENCE↗

Luminescence properties of Sm{sup 3+} doped YPO{sub 4}: Effect of solvent, heat-treatment, Ca{sup 2+}/W{sup 6+}-co-doping and its hyperthermia application

Sm{sup 3+} doped YPO{sub 4} spherical nanoparticles are prepared by wet chemical route. Pure YPO{sub 4} shows the tetragonal phase, which is stable up to 900 °C, whereas pure SmPO{sub 4} shows the phase transition from hexagonal to monoclinic when heated above 800 °C. The (2-10 at.%) Sm{sup 3+} doped YPO{sub 4} shows the mixture of phases of tetragonal and hexagonal, which transform to the tetragonal phase above 800 °C. Infra-red study could distinguish confined water in the pore of hexagonal phase from water present on the surface of particles. Luminescence intensities of Sm{sup 3+} at 564, 601 and 645 nm are weak in case of as-prepared samples because of high non-radiative rate arising from the H{sub 2}O molecules present in pores of hexagonal lattice. The intensities increase for samples heated up to 900 °C because of increase of extent of radiative rate. Luminescence lifetime increases with increase of heat-treatment up to 900 °C. When solvent of as-prepared sample was changed from the H{sub 2}O to D{sub 2}O, 5 times enhancement in luminescence intensity is observed, which can be ascribed to the lower vibration energy of D-O over H-O, which is near to Sm{sup 3+}. When Y{sup 3+} and P{sup 5+} ions are substituted by Ca{sup 3+} and W{sup 3+} up to 3 at.%, there is an enhancement of luminescence. In order to use them as bio-labeling in drug delivery for hyperthermia applications, hybrid of Fe{sub 3}O{sub 4}@YPO{sub 4}:7Sm is prepared and heating up to 45 °C is observed under AC magnetic field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plasma-enhanced chemical vapor deposition of graphene on copper substrates

A plasma enhanced vapor deposition process is used to synthesize graphene from a hydrogen/methane gas mixture on copper samples. The graphene samples were transferred onto SiO{sub 2} substrates and characterized by Raman spectroscopic mapping and atomic force microscope topographical mapping. Analysis of the Raman bands shows that the deposited graphene is clearly SLG and that the sheets are deposited on large areas of several mm{sup 2}. The defect density in the graphene sheets is calculated using Raman measurements and the influence of the process pressure on the defect density is measured. Furthermore the origin of these defects is discussed with respect to the process parameters and hence the plasma environment.

36 MATERIALS SCIENCE↗

Bi-Sn alloy catalyst for simultaneous morphology and doping control of silicon nanowires in radial junction solar cells

Low-melting point metals such as bismuth (Bi) and tin (Sn) are ideal choices for mediating a low temperature growth of silicon nanowires (SiNWs) for radial junction thin film solar cells. The incorporation of Bi catalyst atoms leads to sufficient n-type doping in the SiNWs core that exempts the use of hazardous dopant gases, while an easy morphology control with pure Bi catalyst has never been demonstrated so far. We here propose a Bi-Sn alloy catalyst strategy to achieve both a beneficial catalyst-doping and an ideal SiNW morphology control. In addition to a potential of further growth temperature reduction, we show that the alloy catalyst can remain quite stable during a vapor-liquid-solid growth, while providing still sufficient n-type catalyst-doping to the SiNWs. Radial junction solar cells constructed over the alloy-catalyzed SiNWs have demonstrated a strongly enhanced photocurrent generation, thanks to optimized nanowire morphology, and largely improved performance compared to the reference samples based on the pure Bi or Sn-catalyzed SiNWs.

14 SOLAR ENERGY↗

Bright and multicolor luminescent colloidal Si nanocrystals prepared by pulsed laser irradiation in liquid

We reported the preparation of bright and multicolor luminescent colloidal Si nanocrystal (Si-nc) by pulsed UV laser irradiation to porous Si (PSi) in an organic solvent. The different-luminescence-color (different-sized) colloidal Si-nc was produced by the pulsed laser-induced fragmentation of different-sized porous nanostructures. The colloidal Si-nc samples were found to have higher photoluminescence quantum efficiencies (20%–23%) than the PSi samples (1%–3%). The brighter emission of the colloidal Si-nc was attributed to an enhanced radiative band-to-band transition rate due to the presence of a surface organic layer formed by UV laser-induced hydrosilylation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Adaptive Reweighted Variance Estimation for Monte Carlo Eigenvalue Simulations

Monte Carlo (MC) simulation is used to solve the eigenvalue form of the Boltzmann transport equation to estimate various parameters such as fuel pin flux distributions that are crucial for the safe and efficient operation of nuclear systems (e.g., a nuclear reactor). Monte Carlo eigenvalue simulation uses a sample mean over many stationary cycles (iterations) to estimate various parameters important to nuclear systems. A variance estimate of the sample mean is often used for calculating the confidence intervals. However, MC eigenvalue simulation variance estimators that ignore the intercycle correlation underestimate the true variance of the estimated quantity. This paper presents novel data-adaptive approaches based on a simple autoregressive (AR) model and sigmoid functions to improve MC variance estimation. The standard MC sample-based variance estimator (or naïve estimator) and the spectral density–based MC variance estimator are enhanced by adding data-adaptive components that reduce their bias and improve performance. By investigating the frequency pattern of the AR(1) (order 1) model, two adaptive spectral estimators and one adaptive naïve estimator are proposed. The proposed estimators manifest superior performance when applied to three test problems compared to the standard spectral density–based estimator previously introduced by the authors. In conclusion, these new estimators are straightforward, as they use online algorithms and do not require storage of tallies from all active cycles.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Rotational and radial velocities of 1.3-2.2 M {sub ☉} red giants in open clusters

This study presents the rotational distribution of red giant (RG) stars in 11 old to intermediate age open clusters. The masses of these stars are all above the Kraft break, so they lose negligible amounts of their birth angular momentum (AM) during the main-sequence (MS) evolution. However, they do span a mass range with quite different AM distributions imparted during formation, with the stars less massive than ∼1.6M {sub ☉} arriving on the MS with lower rotation rates than the more massive stars. The majority of RGs in this study are slow rotators across the entire red giant branch regardless of mass, supporting the picture that intermediate-mass stars rapidly spin down when they evolve off the MS and develop convection zones capable of driving a magnetic dynamo. Nevertheless, a small fraction of RGs in open clusters show some level of enhanced rotation, and faster rotators are as common in these clusters as in the field RG population. Most of these enhanced rotators appear to be red clump stars, which is also true of the underlying stellar sample, while others are clearly RGs that are above or below the clump. In addition to rotational velocities, the radial velocities (RVs) and membership probabilities of individual stars are also presented. Cluster heliocentric RVs for NGC 6005 and Pismis 18 are reported for the first time.

79 ASTRONOMY AND ASTROPHYSICS↗