Search NASA⌕ Search

SEARCH · Search NASA

Results for “Exp”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Photoionisation modelling of Nova LMC 1990 #1

Nova LMC 1990A was a very fast Ne-O-Mg nova, for which a particularly dense coverage of spectral observation in both the UV and optical was obtained. The data for the nebular phase were subjected to an analysis by the photoionization modeling code MAPPINGS 2. The following parameters were obtained: L(sub max) = 8 x 10(exp 4) solar luminosity, T(sub eff) = 2 x 10(exp 5) K and the mass of ejecta = 5/5 x 10(exp -5) solar mass. The abundnace ratios in the ejecta were similar to those obtained by Williams et al. (1985) in the case of V693 CrA 1981. The N/O ratio and the overabundance of Al is consistent with ourburst on a ONeMg white dwarf of mass approximately equal to 1.2 solar mass, but the super-Eddington luminosity, and amount of mass ejected presents some problems to theory.

Dopita, M. A.↗

Volcanic eruptions on Io: Heat flow, resurfacing, and lava composition

We model an infrared outburst on Io as being due to a large, erupting lava flow which increased its area at a rate of 1.5 x 10(exp 5)/sq m and cooled from 1225 to 555 K over the 2.583-hr period of observation. The inferred effusion rate of 3 x 10(exp 5) cu m/sec for this eruption is very high, but is not unprece- dented on the Earth and is similar to the high eruption rates suggested for early lunar volcanism. Eruptions occur approxi- mately 6% of the time on Io. These eruptions provide ample resurfacing to explain Io's lack of impact craters. We suggest that the large total radiometric heat flow, 10(exp 14) W, and the size and temperature distribution of the thermal anomalies (McEwen et al. 1992; Veeder et al. 1994) can be accounted for by a series of silicate lava flows in various stages of cooling. We propose that the whole suite of Io's currently observed thermal anomalies was produced by multiple, high-eruptive-rate silicate flows within the past century.

Blaney, Diana L.↗

Mass of dust in the Martian atmosphere

Estimates of the mass of dust suspended in the Martian atmosphere are derived from global and regional 9-micrometer opacity maps produced from Viking Infrared Thermal Mapper data. During the peak of the 1977b storm, a total dust mass of approximately 4.3 x 10(exp 14) g was suspended, equivalent to 4.3 x 10(exp -4) g/sq cm, or a layer 1.4 micrometers thick. During a local dust storm near Solis Planum at L(sub s) 227 deg, approximately 1.3 x 10(exp 13) g of dust were lofted, equal to about a 6-micrometer layer in that vicinity.

Martin, Terry Z.↗

Competition of supermassive black holes and galactic spheroids in the destruction of globular clusters

The globular clusters that we observe in galaxies may be only a fraction of the initial population. Among the evolutionary influences on the population is the destruction of globular clusters by tidal forces as the cluster moves through the field of influence of a disk, a bulge, and/or a putative nuclear component (black hole). We have conducted a series of N-body simulations of globular clusters on bound and marginally bound orbits through poetentials that include black hole and speroidal components. The degree of concentration of the spheroidal component can have a considerable impact on the extent to which a globular cluster is disrupted. If half the mass of a 10(exp 10) solar mass spheroid is concentrated within 800 pc, then only black holes with masses greater than 10(exp 9) solar mass can have a significant tidal influence over that already exerted by the bulge. However, if the matter in the spheroidal component is not so strongly concentrated toward the center of the galaxy, a more modest central black hole (down to 10(exp 8) solar mass) could have a dominant influence on the globular cluster distribution, particularly if many of the clusters were initially on highly radial orbits. Our simulations show that the stars that are stripped from a globular cluster follow orbits with roughly the same eccentricity as the initial cluster orbit, spreading out along the orbit like a 'string of pearls.' Since only clusters on close to radial orbits will suffer substantial disruption, the population of stripped stars will be on orbits of high eccentricity.

Charlton, Jane C.↗

Composition of interstellar clouds in the disk and halo. 3: HD 149881

The spectrum of HD 149881, a halo star 1300 pc above the Galactic plane, has been analyzed, based on high-resolution GHRS data from Hubble Space Telescope (HST) together with 21 cm emission observations and profiles of Na I and Ca II features. The results reveal 11 absorption components, of which nine are produced in H I regions, with log N(H(sup 0) in each region mostly approximately 19.5; one component clearly originates in an H II region. Detailed column densities show that (D(Zn)), the absolute value of the depletion D, for Zn, like that for S, does not much exceed 0.1 dex. With Zn used as a standard of reference, D(Fe) varies from -1.1 to -0.6 dex; (D(Cr)) and (D(Mn)) average less than (D(Fe)) by about 0.1 and 0.2 dex, respectively, with dispersions of about 0.1 dex in this difference. As in Papers I and II, the measured D(Si) is consistent with a 2 to 1 ratio of Fe to Si atoms in grains. The kinetic temperature is these H I regions varies widely among components. Maximum temperatures, found from the widths of 21 cm emission components, range from about 100 to 10,000 K, while actual temperatures, found by comparing the H I widths with the b-values for the ultraviolet features, are about equal or less than 1000 K for six of the H I components. In contrast, toward the halo star HD 93521, temperatures of about 6000 K were found for most of the components. With use of these HD 149881 temperatures, values of n(sub e) were obtained from the ionization equilibrium of Ca(+) and also of Na(0). These values range over an order of magnitude, from about 4.9 x 10(exp -2) to 1.3 x 10(exp -3)/cu cm, systematically smaller (but also less certain) than in HD 93521. For the low values of n(sub e) found in the coldest components, the electrons can be accounted for by ionization of C atoms, if n(sub H) approximately equals 10/cu cm. For the warmest component, an ionization probability of beta(H(sup 0)) approximately equals 3 x 10(exp -15)/s is required, with lower values for other H I components.

Spitzer, Lyman, Jr.↗

Deep ROSAT HRI observations of the Orion nebula region

We present results from three deep ROSAT high-resolution imager observations of the Orion Nebula star-forming region. The X-ray images contain over 1500 cataloged stars in a roughly 0.8 sq deg region centered on the Trapezium. In all, 389 distinct X-ray sources have been detected, at least two-thirds of which are associated with a single proper-motion cluster member. X-ray emission is detected from stars of all spectral types, from massive O- and B-type components of the Trapezium to the coolest, low-mass pre-main-sequence (PMS) stars. In this paper we focus primarily on X-ray emission from the late-type PMS stars. Of the approximately 100 late-type cluster members with measured spectral types, approximately three-fourths have been detected; we have derived X-ray luminosity upper limits for the remaining stars. We found coronal X-ray emission turns on around spectral type F6, with the upper envelope of activity increasing with deceasing effective temperature. When plotted in an X-ray luminosity versus bolometric luminosity diagram, late-type PMS stars lie below a 'saturation' line corresponding to L(sub x)/L(sub bol) approximately 10(exp -3). For approximately solar-mass PMS stars, we find a median X-ray luminosity approximately 1 x 10(exp 30) ergs/s. The late G, K, and M stars exhibit nearly a two order of magnitude spread in X-ray luminosity and in L(sub x)/L(sub bol) at a given effective temperature. Plots of X-ray activity versus v sin i rotational velocity and rotational period appear to show no clear dependence of activity on rotation. However, because only a small fraction of late-type PMS stars in the Orion Nebula have measured v sin i or P(sub rot) and because of uncertainties in L(sub x) and L(sub x)/L(sub bol), we believe the data are not conclusive on this point. Light curves of the detected X-ray sources have revealed at least 10 strong X-ray flares with characteristic rise times greater than or approximately equal to 1 hr and decay times ranging from approximately 2 to 12 hr. All the flares have X-ray energies in excess of 3 x 10(exp 35) ergs. Many of the X-ray sources associated with late-type cluster members have been observed in more than one ROSAT HRI exposure, allowing us to look for variability on the approximately 1 yr timescale between HRI observations. A statistical analysis of the resulting count rate ratios suggests that at least one-fourth of the late-type cluster stars are significantly variable on this timescale.

Gagne, Marc↗

The first search for a gamma-ray burst quiescent counterpart in the extreme ultraviolet with EUVE

The opening of the extreme ultraviolet window by the Extreme Ultraviolet Explorer (EUVE) satellite has provided the unique opportunity to perform the first search for a quiescent gamma-ray burst counterpart at these wavelengths. Such emission might be expected if some bursts are related to nearby hot neutron stars or neutron stars with accretion disks, among other objects. We report here on a 40 ks observation on the 1992 March 25 gamma-ray burst error box, determined by triangulation with the Third Interplanetary Network. No quiescent 40-190 A Extreme Ultraviolet (EUV) source was identified using the Deep Survey instrument, and a 3 sigma upper limit of 2.9 x 10(exp -14) erg/sq cm/s was obtained. Similarly, upper limits to the 140-380 and 280-760 A fluxes were obtained with the medium- and long-wavelength spectrometers; they are 1.1 x 10(exp -12) and 5.0 x 10(exp -13) erg/sq cm/s, respectively. We discuss the constraints which these limits impose on thermally radiating quiescent counterparts.

Hurley, K.↗

An intercomparison of plasma turbulence at three comets: Grigg-Skjellerup, Giacobini-Zinner, and Halley

The power laws are approximately f(exp -1.9), f(exp -1.9), and f(exp -2.1) respectively for the Grigg-Shjellerup (GS), Giacobini-Zinner (GZ), and Halley (H) comets. Other than similarities in the power spectra, the magnetic field turbulence is considerably different at the three comets. Phase steepening is demonstrated to occur at the trailing edges of the GS waves. This is probably due to nonlinear steepening plus dispersion of the left-hand mode components, i.e., the turbulence is whistler-mode. This too can be explained by nonlinear steepening plus dispersion of the magnetosonic waves. At the level of GS and GZ turbulence development when the spacecraft measurements were made, classical three-wave processes, such as the decay or modulation instabilities do not appear to play important roles. It is most likely that the nonlinear steepening and dispersive time scales are more rapid than three-wave processes, and the latter had not had time to develop for the relatively new turbulence. The wave turbulence at Halley is linearly polarized. The exact nature of this turbulence is still not well understood. Several possibilities are suggested, based on a preliminary analyses.

Tsurutani, Bruce T.↗

Progress in HTS trapped field magnets: J(sub c), area, and applications

Progress in trapped field magnets is reported. Single YBCO grains with diameters of 2 cm are made in production quantities, while 3 cm, 4 1/2 cm and 6 cm diameters are being explored. For single grain tiles: J(sub c) is approximately 10,000 A/cm(exp 2) for melt textured grains; J(sub c) is approximately 40,000 A/cm2 for light ion irradiation; and J(sub c) is approximately 85,000 A/cm(exp 2) for heavy ion irradiation. Using 2 cm diameter tiles bombarded by light ions, we have fabricated a mini-magnet which trapped 2.25 Tesla at 77K, and 5.3 Tesla at 65K. A previous generation of tiles, 1 cm x 1 cm, was used to trap 7.0 Tesla at 55K. Unirradiated 2.0 cm tiles were used to provide 8 magnets for an axial gap generator, in a collaborative experiment with Emerson Electric Co. This generator delivered 100 Watts to a resistive load, at 2265 rpm. In this experiment activation of the TFMs was accomplished by a current pulse of 15 ms duration. Tiles have also been studied for application as a bumper-tether system for the soft docking of spacecraft. A method for optimizing tether forces, and mechanisms of energy dissipation are discussed. A bus bar was constructed by welding three crystals while melt-texturing, such that their a,b planes were parallel and interleaved. The bus bar, an area of approximately 2 cm(exp 2), carried a transport current of 1000 amps, the limit of the testing equipment available.

Weinstein, Roy↗

Effect of Nb2O5 and V2O5 addition on the superconducting properties of YBa2Cu3O(y) thin films

The effect of Nb2O5 and V2O5 addition on the superconducting properties and microstructure of YBa2Cu3O(y) has been studied in thin films. Polycrystalline targets for laser ablation were prepared by mixing high purity V2O5 or Nb2O5 powders with a well characterized YBa2Cu3O(y) powder in the range 0 to 4 wt percent by solid state reaction method. Thin films (approximately 1500 A thickness) of the above targets were grown on (100) SrTiO3 (STO) and (100) LaAlO3 (LAO) substrates at 700 C temperature by pulsed laser deposition (PLD) technique. In the case of Nb2O5 addition we have noticed an increase in J(sub c) up to 0.5 wt percent and higher additive concentration (greater than 0.5 wt percent) have degraded the superconducting properties. However, in the case of V2O3 addition, there is an improvement in current density and microstructural properties up to 1 wt percent and the superconducting properties degrade for concentrations greater than 1 wt percent. The best J(sub c) for 0.5 wt percent of Nb2O5 added YBCO thin film is 1.6 x 10(exp 6) A/sq cm and for that of V2O5 added sample is 3.4 x 10(exp 6) A/sq cm at 77 K as compared to the pure YBa2Cu3O(y) (YBCO) film J(sub c) (1.2 x 10(exp 6) A/sq cm) observed on STO substrates. The reason for improvement in J(sub c) and microstructural properties in the case of V2O5 addition could be due to the low melting of V2O5 (690 C) which can act as a very good surfactant during deposition. Over all, we have realized that Nb2O5 addition or V2O5 addition to YBCO have shown significant improvement over the undoped YBa2Cu3O(7-x) films grown under identical conditions.

Srinivas, S.↗

Discovering the Theorem of Pythagoras

In this 'Project Mathematics! series, sponsored by the California Institute of Technology, Pythagoraus' theorem a(exp 2) + b(exp 2) = c(exp 2) is discussed and the history behind this theorem is explained. hrough live film footage and computer animation, applications in real life are presented and the significance of and uses for this theorem are put into practice.

Lattanzio, Robert↗

Synthesis of phthalocyanine doped sol-gel materials

The synthesis of sol-gel silica materials doped with three different types of metallophthalocyanines has been studied. Homogeneous materials of good optical quality were prepared and the first optical limiting measurements of dyes in sol-gel hosts were carried out. The properties of these solid state limiters are similar to limiters based on phthalocyanine (Pc) in solution. Sol-gel silica materials containing copper, tin and germanium phthalocyanines were investigated. The initial step in all cases was to prepare silica sols by the sonogel method using tetramethoxy silane (TMOS), HCl and distilled water. Thereafter, the synthesis depended upon the specific Pc and its solubility characteristics. Copper phthalocyanine tetrasulfonic acid tetra sodium salt (CuPc4S) is soluble in water and various doping levels (1 x 10 (exp -4) M to 1 x 10 (exp -5) M) were added to the sol. The group IV Pc's, SnPc(OSi(n-hexyl)3)2 and GePc(OSi(n-hexyl)3)2, are insoluble in water and the process was changed accordingly. In these cases, the compounds were dissolved in THF and then added to the sol. The Pc concentration in the sol was 2 x 10(exp -5)M. The samples were then aged and dried in the standard method of making xerogel monoliths. Comparative nanosecond optical limiting experiments were performed on silica xerogels that were doped with the different metallophthalocyanines. The ratio of the net excited state absorption cross section (sigma(sub e)) to the ground state cross section (sigma(sub g)) is an important figure of merit that is used to characterize these materials. By this standard the SnPc sample exhibits the best limiting for the Pc doped sol-gel materials. Its cross section ratio of 19 compares favorably with the value of 22 that was measured in toluene. The GePc materials appear to not be as useful as those containing SnPc. The GePc doped solids exhibit a higher onset energy (2.5 mj and lower cross section ratio, 7. The CuPc4S sol-gel material has a still lower cross section ratio, 4, however, the tetrasulfonate groups make the dye soluble in water which greatly facilitates its incorporation into the sol-gel matrix. The nonlinear transmission of CuPc4S in a pH 2 buffer solution and in a silica xerogel were compared. It is evident that the CuPc4S preserves its optical limiting behavior in the sol-gel matrix, indicating that the fundamental excited state absorption process is essentially the same for a molecule in solution or in the solid state. Although the spectroscopic details of energy level lifetimes are unknown, the significance is that passive optical limiting has been achieved in the solid state via incorporation of a dye into an inorganic host. The only compromise occurs at the extremely high energy regime where photobleaching is observed. This is a result of the limited mobility of the dye molecules in the solid silica host relative to a liquid host. The effects of photodegradation in the xerogel are additive, whereas the solution provides a supply of fresh molecules that are free to enter the active volume between pulses.

Dunn, Bruce↗

Supersonic combustion ramjet propulsion experiments in a shock tunnel

Measurements have been made of the propulsive effect of supersonic combustion ramjets incorporated into a simple axisymmetric model in a free piston shock tunnel. The nominal Mach number was 6, and the stagnation enthalpy varied from 2.8 MJ kg(exp -1) to 8.5 MJ kg(exp -1). A mixture of 13 percent silane and 87 percent hydrogen was used as fuel, and experiments were conducted at equivalence ratios up to approximately 0.8. The measurements involved the axial force on the model, and were made using a stress wave force balance, which is a recently developed technique for measuring forces in shock tunnels. A net thrust was experienced up to a stagnation enthalpy of 3.7 MJ kg(exp -1), but as the stagnation enthalpy increased, an increasing net drag was recorded. pitot and static pressure measurements showed that the combustion was supersonic. The results were found to compare satisfactorily with predictions based on established theoretical models, used with some simplifying approximations. The rapid reduction of net thrust with increasing stagnation enthalpy was seen to arise from increasing precombustion temperature, showing the need to control this variable if thrust performance was to be maintained over a range of stagnation enthalpies. Both the inviscid and viscous drag were seen to be relatively insensitive to stagnation enthalpy, with the combustion chambers making a particularly significant contribution to drag. The maximum fuel specific impulse achieved in the experiments was only 175 sec., but the theory indicates that there is considerable scope for improvement on this through aerodynamic design.

Paull, A.↗

A longitudinal aerodynamic data repeatability study for a commercial transport model test in the National Transonic Facility

A high Reynolds number investigation of a commercial transport model was conducted in the National Transonic Facility (NTF) at Langley Research Center. This investigation was part of a cooperative effort to test a 0.03-scale model of a Boeing 767 airplane in the NTF over a Mach number range of 0.70 to 0.86 and a Reynolds number range of 2.38 to 40.0 x 10(exp 6) based on the mean aerodynamic chord. One of several specific objectives of the current investigation was to evaluate the level of data repeatability attainable in the NTF. Data repeatability studies were performed at a Mach number of 0.80 with Reynolds numbers of 2.38, 4.45, and 40.0 x 10(exp 6) and also at a Mach number of 0.70 with a Reynolds number of 40.0 x 10(exp 6). Many test procedures and data corrections are addressed in this report, but the data presented do not include corrections for wall interference, model support interference, or model aeroelastic effects. Application of corrections for these three effects would not affect the results of this study because the corrections are systematic in nature and are more appropriately classified as sources of bias error. The repeatability of the longitudinal stability-axis force and moment data has been accessed. Coefficients of lift, drag, and pitching moment are shown to repeat well within the pretest goals of plus or minus 0.005, plus or minus 0.0001, and plus or minus 0.001, respectively, at a 95-percent confidence level over both short- and near-term periods.

Wahls, R. A.↗

A search for the C3 carbon cluster in the Interstellar Medium

We have searched for rovibrational emission and absorption transitions arising from the 63 cm(exp -1) nu(sub 2) (pi(sub u)) bending vibration of the C3 carbon cluster in the interstellar medium using the Betz/Boreiko heterodyne receiver on board the Kuiper Airborne Observatory. The Q(4) line at 1896.707 GHz was searched for in the IRc2 Orion/M42 and the W3 sources, and the R(2) transition at 1968.594 GHz was searched for in Sgr B2. No emission lines were observed in any source. However, a weak absorption was detected in Sgr B2 with a LSR velocity of 63.7+/-0.6 km s(exp -1) and a FWHM linewidth of 7.9+/-0.8 km s(exp -1). This absorption is tentatively identified as the R(2) transition of the C(sub 3) bending mode.

Vanorden, A.↗

A high-resolution atlas of the infrared spectrum of the Sun and the Earth atmosphere from space. Volume 3: Key to identification of solar features

During the period April 29 through May 2, 1985, the Atmospheric Trace Molecule Spectroscopy (ATMOS) experiment was operated as part of the Spacelab-3 (SL-3) payload on the shuttle Challenger. The instrument, a Fourier transform spectrometer, recorded over 2000 infrared solar spectra from an altitude of 360 km. Although the majority of the spectra were taken through the limb of the Earth's atmosphere in order to better understand its composition, several hundred of the 'high-sun' spectra were completely free from telluric absorption. These high-sun spectra recorded from space are, at the present time, the only high-resolution infrared spectra ever taken of the Sun free from absorptions due to constituents in the Earth's atmosphere. Volumes 1 and 2 of this series provide a compilation of these spectra arranged in a format suitable for quick-look reference purposes and are the first record of the continuous high-resolution infrared spectrum of the Sun and the Earth's atmosphere from space. In the Table of Identifications, which constitutes the main body of this volume, each block of eight wavenumbers is given a separate heading and corresponds to a page of two panels in Volume 1 of this series. In addition, three separate blocks of data available from ATMOS from 622-630 cm(exp -1), 630-638 cm(exp -1) and 638-646 cm(exp -1), excluded from Volume 1 because of the low signal-to-noise ratio, have been included due to the certain identification of several OH and NH transitions. In the first column of the table, the corrected frequency is given. The second column identifies the molecular species. The third and fourth columns represent the assigned transition. The fifth column gives the depth of the molecular line in millimeters. Also included in this column is a notation to indicate whether the line is a blend or lies on the shoulder(s) of another line(s). The final column repeats a question mark if the line is unidentified.

Geller, Murray↗

InP tunnel junction for InGaAs/InP tandem solar cells

Chemical beam epitaxy (CBE) has been shown to allow the growth of high quality materials with reproducible complex compositional and doping profiles. The main advantage of CBE compared to metalorganic chemical vapor deposition (MOCVD), the most popular technique for InP-based photovoltaic device fabrication, is the ability to grow high purity epilayers at much lower temperatures (450-530 C). We have previously shown that CBE is perfectly suited toward the fabrication of complex photovoltaic devices such as InP/InGaAs monolithically integrated tandem solar cells, because its low process temperature preserves the electrical characteristics of the InGaAs tunnel junction commonly used as an ohmic interconnect. In this work using CBE for the fabrication of optically transparent (with respect to the bottom cell) InP tunnel diodes is demonstrated. Epitaxial growth were performed in a Riber CBE 32 system using PH3 and TMIn as III and V precursors. Solid Be (p-type) and Si (n-type) have been used as doping sources, allowing doping levels up to 2 x 10(exp -19)/cu cm and 1 x 10(exp -19)/cu cm for n and p type respectively. The InP tunnel junction characteristics and the influence of the growth's conditions (temperature, growth rate) over its performance have been carefully investigated. InP p(++)/n(++) tunnel junction with peak current densities up to 1600 A/sq cm and maximum specific resistivities (V(sub p)/I(sub p) - peak voltage to peak current ratio) in the range of 10(exp -4) Omega-sq cm were obtained. The obtained peak current densities exceed the highest results previously reported for their lattice matched counterparts, In(0.53)Ga( 0.47)As and should allow the realization of improved minimal absorption losses in the interconnect InP/InGaAs tandem devices for Space applications. Owing to the low process temperature required for the top cell, these devices exhibit almost no degradation of its characteristics after the growth of subsequent thick InP layer suggesting minimal doping cross diffusion in the narrow space-charge region (approximately 1-5 nm) of the device. The fabrication of tandem devices using InP tunnel diodes as interconnect is in progress and will be reported at the conference.

Vilela, M. F.↗

The Cambridge-Cambridge x-ray serendipity survey. 2: Classification of x-ray luminous galaxies

We present the results of an intermediate-resolution (1.5 A) spectroscopic study of 17 x-ray luminous narrow emission-line galaxies previously identified in the Cambridge-Cambridge ROSAT Serendipity Survey and the Einstein Extended Medium Sensitivity Survey. Emission-line ratios reveal that the sample is composed of ten Seyfert and seven starburst galaxies. Measured linewidths for the narrow H alpha emission lines lie in the range 170 - 460 km s(exp -1). Five of the objects show clear evidence for asymmetry in the (OIII) lambda 5007 emission-line profile. Broad H alpha emission is detected in six of the Seyfert galaxies, which range in type from Seyfert 1.5 to 2. Broad H beta emission is only detected in one Seyfert galaxy. The mean full width at half maximum for the broad lines in the Seyfert galaxies is FWHM = 3900 +/- 1750 km s(exp -1). Broad (FWHM = 2200 +/- 600 km s(exp -1) H alpha emission is also detected in three of the starburst galaxies, which could originate from stellar winds or supernovae remnants. The mean Balmer decrement for the sample is H alpha / H beta = 3, consistent with little or no reddening for the bulk of the sample. There is no evidence for any trend with x-ray luminosity in the ratio of starburst galaxies to Seyfert galaxies. Based on our previous observations, it is therefore likely that both classes of object comprise approximately 10 percent of the 2 keV x-ray background.

Boyle, B. J.↗