Search NASA⌕ Search

SEARCH · Search NASA

Results for “Field Operators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

Atomic scale investigations of the gate controlled tunneling effect in graphyne nanoribbon

Configuration and transport properties of zigzag graphyne nanoribbon (n = 2) are investigated by means of the first-principles calculations and non-equilibrium Green's function in this work. We demonstrated the controllability of the graphyne's conductivity by gate bias, and the tunneling behavior induced by gate and drain voltages was investigated systemically. The characteristics of I{sub d}-V{sub d}, I{sub d}-V{sub g}, as well as the evolutions of current with electron temperature elevation were explored. The device exhibits a tunneling ratio around 10{sup 3}, and the state art of tunneling operations of the tunneling field effect transistor in this split-new material was achieved.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2014

Note: Electronic damping of microphonics in superconducting resonators of a continuous wave linac

The paper presents an implementation technique to damp the microphonics in superconducting resonators utilizing the coupling between the electromagnetic and the mechanical modes of a resonator. In the technique used the resonant frequency variations are fed back to modulate the field amplitude through a suitable transfer function. Of the two transfer functions used in the experiments, one emulates a derivative action and is placed in a negative feedback configuration. The other transfer function is essentially a parallel combination of second order low pass filters and is used in a positive feedback configuration. Experiments with the Quarter Wave resonators of IUAC, New Delhi linac demonstrate that the damping of some of the modes increases significantly with the introduction of this feedback leading to a reduction in power required for field stabilization and quieter operation of the RF control system.

43 PARTICLE ACCELERATORS↗
DOE OSTI2014

Influence of impurities on the transition from minority to mode conversion heating in ({sup 3}He)-H)- plasmas

Ion cyclotron resonance heating (ICRH) is one of the main auxiliary heating systems used in present-day tokamaks and is planned to be installed in ITER. In the initial full-field phase of ITER operating with hydrogen majority plasmas, fundamental resonance heating of helium-3 ions is one of a few ICRH schemes available. Past JET experiments with the carbon wall revealed a significant impact of impurities on the ICRH performance in ({sup 3}He)-H plasmas. A significant reduction of the helium-3 concentration, at which the transition from minority ion to mode conversion heating occurs, was found to be due to a high plasma contamination with carbon ions. In this paper we discuss the effect of Be and another impurity species present at JET after the installation of a new ITER-like wall on the transition helium-3 concentration in ({sup 3}He)-H plasmas. We suggest a potential method for controlling helium-3 level needed for a specific ICRH regime by puffing an extra helium-4 gas to the plasma.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Fast wave heating in the NSTX-Upgrade device

NSTX-Upgrade will operate with toroidal magnetic fields (B{sub T}) up to 1 T, nearly twice the value used in the experiments on NSTX, and the available NBI power will be doubled. The doubling of B{sub T} while retaining the 30 MHz RF source frequency has moved the heating regime from the high harmonic fast wave (HHFW) regime used in NSTX to the mid harmonic fast wave (MHFW) regime. By making use of the full wave code AORSA, this work shows that direct ion damping (mainly by thermal ions localized at the 5th harmonic resonance) might be significant in NSTX-Upgrade under TRANSP predicted full performance conditions and the electron and ion absorption is sensitive to the ratio of electron and ion temperature. Launching at high toroidal wave number appears to be one way to significantly reduce the ion damping. By using the extended AORSA code, which includes a detailed description of the scrape-off layer in the field solutions, we found a large electric field amplitude outside of the last closed flux surface as previously seen in NSTX from AORSA simulations (D. L. Green, et al, Phys. Rev. Lett. 107, 145001 (2011)). Preliminary results by introducing a collision damping in the scrape-off layer in the AORSA code to represent a damping process are presented, showing for the first time absorbed power in the scrape-off layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

A resistively heated CeB{sub 6} emissive probe

The plasma potential, V{sub p}, is a key quantity in experimental plasma physics. Its spatial gradients directly yield the electrostatic field present. Emissive probes operating under space-charge limited emission conditions float close to V{sub p} even under time-varying conditions. Throughout their long history in plasma physics, they have mostly been constructed with resistively heated tungsten wire filaments. In high density plasmas (>10{sup 12} cm{sup −3}), hexaboride emitters are required because tungsten filaments cannot be heated to sufficient emission without component failure. A resistively heated emissive probe with a cerium hexaboride, CeB{sub 6}, emitter has been developed to work in plasma densities up to 10{sup 13} cm{sup −3}. To show functionality, three spatial profiles of V{sub p} are compared using the emissive probe, a cold floating probe, and a swept probe inside a plasma containing regions with and without current. The swept probe and emissive probe agree well across the profile while the floating cold probe fails in the current carrying region.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2016

Vectorial mapping of noncollinear antiferromagnetic structure of semiconducting FeSe surface with spin-polarized scanning tunneling microscopy

Antiferromagnetic semiconductors gain increasing interest due to their possible application in spintronics. Using spin polarized scanning tunneling microscopy operating in a vector field, we mapped the noncollinear antiferromagnetic spin structure of a semiconducting hexagonal FeSe surface on the atomic scale. The surface possesses an in-plane compensated Néel structure which is further confirmed by first-principles calculations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Hydrogen-terminated diamond vertical-type metal oxide semiconductor field-effect transistors with a trench gate

The hydrogen-terminated diamond surface (C-H diamond) has a two-dimensional hole gas (2DHG) layer independent of the crystal orientation. A 2DHG layer is ubiquitously formed on the C-H diamond surface covered by atomic-layer-deposited-Al{sub 2}O{sub 3}. Using Al{sub 2}O{sub 3} as a gate oxide, C-H diamond metal oxide semiconductor field-effect transistors (MOSFETs) operate in a trench gate structure where the diamond side-wall acts as a channel. MOSFETs with a side-wall channel exhibit equivalent performance to the lateral C-H diamond MOSFET without a side-wall channel. Here, a vertical-type MOSFET with a drain on the bottom is demonstrated in diamond with channel current modulation by the gate and pinch off.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Broadband ultrafast terahertz spectroscopy in the 25 T Split Florida-Helix

In this paper, we describe the development of a broadband (0.3–10 THz) optical pump-terahertz probe spectrometer with an unprecedented combination of temporal resolution (≤200 fs) operating in external magnetic fields as high as 25 T using the new Split Florida-Helix magnet system. Finally, using this new instrument, we measure the transient dynamics in a gallium arsenide four-quantum well sample after photoexcitation at 800 nm.

47 OTHER INSTRUMENTATION↗
DOE OSTI2019

Computational investigation of ion cyclotron heating on Proto-MPEX

Ion cyclotron heating (ICH) on the Prototype Material Plasma Exposure eXperiment (Proto-MPEX) is to be accomplished using the “beach-heating” technique. Beach heating has not been previously demonstrated to efficiently heat core ions at the high electron density values present in Proto-MPEX. This work numerically investigates the wave propagation characteristics of the ICH region on Proto-MPEX to explore avenues for efficient core ion heating. The analysis reveals that finite electron temperature effects are required to predict core ion heating. Cold plasma dispersion analysis and full-wave simulations show that the inertial Alfvén wave (IAW) is restricted from coupling power into the core plasma because (1) the group velocity is too shallow for its energy to penetrate into the core before damping in the periphery and (2) when operating in a magnetic field where ω/ω ci ≳ 0.7, the IAW is cut off from the core plasma by the Alfvén resonance. However, including kinetic effects shows that the kinetic Alfvén wave (KAW) can propagate in the electron temperature regime in Proto-MPEX. Full-wave simulations show that when the electron temperature is increased to T e > 2 eV and the edge electron density is sufficiently high n e edge > 1 × 10 17 m -3 , ion power absorption in the core increases substantially (≈25% of total power). Here, the increase in ion power absorption in the core is attributed to the propagation of the KAW. Calculations of electron and ion power absorption show that the electron heating is localized around the Alfvén resonance, while the ion heating is localized at the fundamental ion cyclotron resonance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

On preheating in Higgs inflation

Abstract Recently, the problem of unitarity violation during the preheating stage of Higgs inflation with a large non-minimal coupling has been much discussed in the literature. We point out that this problem can be translated into a strong coupling problem for the dimensionless effective coupling, and that the existence of these problems is highly dependent on the choice of higher-dimensional operators because they can significantly change the background dynamics and the canonical normalization of the fluctuations around it. Correspondingly, the typical energy of particles produced during the first stage of preheating can remain comparable to or below the cutoff scale of the theory. As an example, we numerically calculate the particle production in the presence of a specific four-derivative operator of the Higgs field, and confirm the statement above. Our argument also applies to multi-field inflation with non-minimal couplings.

Astronomy & Astrophysics↗
DOE OSTI2019

Modeling of high harmonic fast wave scenarios for NSTX Upgrade

NSTX-Upgrade will operate with toroidal magnetic fields ( B T ) up to 1 T, nearly twice the value used in the experiments on NSTX, and the available neutral beam injection (NBI) power will be doubled. The doubling of B T while retaining the 30 MHz RF source frequency has moved the heating regime from the high harmonic fast wave (HHFW) regime used in NSTX to the mid harmonic fast wave regime. By making use of the full wave code AORSA (assuming a Maxwellian plasma), this work explores different HHFW scenarios for two possible antenna frequencies (30 and 60 MHz) and with and without NBI. Both frequencies have large electron absorption for large wave toroidal number particularly without NBI. With the presence of NBI, the fast ions absorption can be dominant in some scenarios. Therefore, a competition between electron and fast ion absorption is clearly apparent partially explaining why in previous NSTX HHFW experiments, a less efficient electron heating was observed. Moreover at the toroidal field of 1 T, a direct thermal ion damping might be possible under the condition when the ion temperature is larger than electron temperature. In general, the electron and ion absorption are found very sensitive to the ratio of electron and ion temperature. The impact of the hydrogen species is also studied showing that, for hydrogen concentration below 2%, the hydrogen absorption is not significant. However, a larger hydrogen concentration could open up new HHFW heating scenarios in NSTX-U. Launching at high toroidal wave number appears to be one way to significantly reduce the ion damping and in turn to obtain large electron damping in the core which can play an important role in the transport studies for NSTX-U. Lastly, an higher magnetic field could also playing a role in increasing the electron temperature and consequently the electron absorption. Indeed a magnetic field scan is also shown and discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Symmetries and anomalies of Hamiltonian staggered fermions

We review the shift (translation) and time reversal symmetries of Hamiltonian staggered fermions and their connection to continuum symmetries concentrating in particular on the case of massless fermions and (3+1) dimensions. We construct operators using the staggered fields that implement these symmetries on finite lattices. We show that shifts composed of an odd multiple of the elementary shift anticommute with time reversal and are related to continuum axial transformations. We argue that the presence of these nontrivial commutation relations implies the existence of lattice ’t Hooft anomalies. From the shifts we also construct a set of conserved, quantized charges that generate continuous symmetries of the lattice theory. In general these do not commute with the vector charge signaling further ’t Hooft anomalies.

Anomalies↗
DOE OSTI2020

Design and demonstration of a distributed-coupling linear accelerator structure

We present a topology for linear accelerators (linacs) in which the power is distributed to the cavities through a waveguide with periodic apertures that guarantees the correct phases and amplitudes along the structure length. Unlike conventional traveling and standing-wave linacs, the presented topology allows the cavity shapes to be designed without the constraints applied to the coupling between cells to transfer power from one cell to the next. Therefore, the topology permits more degrees of freedom for the optimization of individual cavity shapes in comparison with conventional linacs. The cavity shapes can be optimized for power consumption and efficiency, and/or the manipulation of the surface fields for high gradient operation. This topology also provides a possibility for low-temperature manufacturing techniques that prevent the annealing of the material during typical brazing processes; hence, the material could retain its original properties such as hardness. We present a design and an experimental demonstration of this linac.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Spin-Transfer-Torque Oscillator with an Antiferromagnetic Exchange-Coupled Composite Free Layer

We present an antiferromagnetically exchange-coupled composite (soft and hard layers) spin torque oscillator (AF-ECC STO) and demonstrate its operation via both analytical and micromagnetic modeling. The operation exploits the exchange field due to the antiferromagnetic coupling between soft and hard sublayers of the free layer as well as on the easy-plane anisotropy of the soft sublayer. Optimized AF-ECC STO structures can generate large-amplitude magnetization oscillations, which can be tuned over a broad frequency range with precessions mostly generated by the soft layer. We demonstrate that the AF-ECC STO structure offers flexibility in current control of the oscillation frequency and magnetization angle for realistic material parameters.

42 ENGINEERING↗
DOE OSTI2023

Integrated and differential fiducial cross-section measurements for the vector boson fusion production of the Higgs boson in the $H → WW^* → evμv$ decay channel at 13 TeV with the ATLAS detector

The vector-boson production cross-section for the Higgs boson decay in the H→WW*→eνμν channel is measured as a function of kinematic observables sensitive to the Higgs boson production and decay properties as well as integrated in a fiducial phase space. The analysis is performed using the proton-proton collision data collected by the ATLAS detector in Run 2 of the LHC at $\sqrt{s}$=13 TeV center-of-mass energy corresponding to an integrated luminosity of 139 fb -1 . The different flavor final state is studied by selecting an electron and a muon originating from a pair of W bosons and compatible with the Higgs boson decay. The data are corrected for the effects of detector inefficiency and resolution, and the measurements are compared with different state-of-the-art theoretical predictions. The differential cross-sections are used to constrain anomalous interactions described by dimension-six operators in an Effective Field Theory.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

On the holographic dual of a topological symmetry operator

We study the holographic dual of a topological symmetry operator in the context of the AdS/CFT correspondence. Symmetry operators arise from topological field theories localized on a subspace of the boundary conformal field theory spacetime. We use bottom up considerations to construct the topological sector associated with their bulk counterparts. In particular, by exploiting the structure of entanglement wedge reconstruction we argue that the bulk counterpart has a nontopological world volume action, i.e., it describes a dynamical object. As a consequence, we find that there are no global 𝑝-form symmetries for 𝑝 ≥ 0 in asymptotically anti–de Sitter spacetimes, which includes the case of noninvertible symmetries. Provided one has a suitable notion of subregion-subregion duality, our argument for the absence of bulk global symmetries applies to more general spacetimes. These considerations also motivate us to consider for general QFTs (holographic or not) the notion of lower-form symmetries, namely, (−𝑚)-form symmetries for 𝑚 ≥ 2.

quantum gravity↗
DOE OSTI2021

Three-Phase LCC-LCC Compensated 50-kW Wireless Charging System with Non-Zero Interphase Coupling

In this paper, an LCC-LCC compensated 50 kW 3phase (3φ) wireless charging system with nonzero interphase mutual inductance is demonstrated. The 3φ-LCC compensation is designed considering a nonzero mutual-inductance among the phase-coils to meet resonance criteria, balance voltages and currents of the resonant tank components, achieve desired voltage gain, and ensure the zero-voltage switching (ZVS) operation. An experimental prototype of the 3φ-LCC-LCC compensation circuit is built for a 50 kW bipolar coil-based 3φ wireless charging system. The prototype system was tested at rated 50 kW power for evaluating the efficiency, ZVS operation, electric and magnetic field emissions, and thermal characteristics. The experimental results show 94.3% dc-to-dc efficiency and only 4.4 μT rms magnetic field emission at the rated 50 kW output power.

Mohammad, Mostak↗
DOE OSTI2023

Reactive Power: sorted, perhaps

The measurement of reactive power has been challenging for over a century. By the 1920s, the IEC and the AIEE were seeking new definitions for reactive power, specifically to handle distorted waveforms and unbalanced systems. Solutions had not and have not been found. This paper shows there are two aspects to the problem. First, the conceptual underpinning of reactive power provides a very shaky foundation for the design of an instrument. Second, the kind of instrument needed is one that has been largely unrecognized in the power engineering field. It is an operational measurement. These aspects of the measurement have been taken into account in IEEE Standard 1459, presently undergoing revision by a working group of the IEEE PES Power System Instrumentation and Measure¬ments Committee.

reactive power, measurement theory, operational, D↗