Search NASA⌕ Search

SEARCH · Search NASA

Results for “LEVELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Nuclear level-density parameters of nuclei in the Z{approx}70 and A{approx}180 mid-shell regions

{alpha}-particle evaporation energy spectra have been measured as a function of {gamma}-ray fold for various target-projectile systems leading to residual nuclei in the range of Z{approx}70 and A{approx}180 with excitation energy of 30-40 MeV. The inverse level-density parameter K was determined for various nuclei by comparing the high-energy part of the {alpha}-particle evaporation spectra with PACE2 predictions. It is observed that the inverse level-density parameter remains constant for all systems studied in this work within statistical errors in the angular momentum range of 15-30 ({Dirac_h}/2{pi}). The fold-gated {alpha}-particle energy spectra in these systems are well reproduced by the PACE2 code with a level-density parameter value of A/(8.2{+-}1.1) MeV{sup -1}.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Time-resolved fluorescence spectroscopy of two-photon laser-excited 8p, 9p, 5f, and 6f levels in neutral xenon

Laser-induced fluorescence of two-photon excited 8p, 9p, J=0,2 and 5f, 6f, J=2 levels in neutral xenon has been investigated in the pressure regime between 4 and 120 Pa. Radiative lifetimes and collisional deactivation rates have been deduced especially for the 5f[3/2]{sub 2}, 5f[5/2]{sub 2}, and 8p[1/2]{sub 0} levels using the Stern-Volmer approach. The spontaneous lifetimes for 5f[3/2]{sub 2}, 5f[5/2]{sub 2}, and 8p[1/2]{sub 0} levels are 94, 78, and 207 ns, respectively. These lifetimes have been calculated also by applying extended multiconfiguration Dirac-Fock wave functions and are found in agreement with experiment within 10-25%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

2.3-MW Medium-Voltage, Three-Level Wind Energy Inverter Applying a Unique Bus Structure and 4.5-kV Si/SiC Hybrid Isolated Power Modules: Preprint

A high-efficiency, 2.3-MW, medium-voltage, three-level inverter utilizing 4.5-kV Si/SiC (silicon carbide) hybrid modules for wind energy applications is discussed. The inverter addresses recent trends in siting the inverter within the base of multimegawatt turbine towers. A simplified split, three-layer laminated bus structure that maintains low parasitic inductances is introduced along with a low-voltage, high-current test method for determining these inductances. Feed-thru bushings, edge fill methods, and other design features of the laminated bus structure provide voltage isolation that is consistent with the 10.4-kV module isolation levels. Inverter efficiency improvement is a result of the (essential) elimination of the reverse recovery charge present in 4.5-kV Si PIN diodes, which can produce a significant reduction in diode turn-off losses as well as insulated-gate bipolar transistor (IGBT) turn-on losses. The hybrid modules are supplied in industry-standard 140 mm x 130 mm and 190 mm x 130 mm packages to demonstrate direct module substitution into existing inverter designs. A focus on laminated bus/capacitor-bank/module subassembly level switching performance is presented.

17 WIND ENERGY↗

Conductive Spray Paint Fabricated Cylindrical Coplanar Waveguide for Noncontact Liquid-Level Sensing

A noncontact liquid-level sensor using a cylindrical coplanar waveguide (CCPW) is proposed. The concept is demonstrated using a prototype device made by directly spraying conductive paint on the outer surface of a glass cylinder. The position of the air–liquid interface is measured using the time-domain reflection (TDR) signal from the CCPW. The geometric parameters of the prototype sensor were optimized using a full-wave simulation tool. The experimental results show that the prototype CCPW-based liquid-level sensor has a resolution of 29.8μm over a range of 210 mm at the sweeping frequency bandwidth of 500 MHz–4 GHz. The tradeoff between the resolution and the measurement range was discussed. The proposed sensor provides a low-cost, easy-to-fabricate, and noncontact method for liquid-level measurement, which has potential applications in fuel storage, chemical production, and wastewater treatment.

42 ENGINEERING↗

Design and Analysis of a Mutual Inductance Level Sensor for Liquid Metals

Here, this article describes the design and analysis of an electromagnetic level sensor for use in high-temperature liquid metal systems. The mutual inductance level sensor (MILS) described in this work was fabricated using two single-conductor mineral insulated cables wrapped in a bifilar fashion around a stainless steel tube core and was housed in an isolating thimble that preserved the pressure boundary of the test vessel. Two sensor variations were fabricated that differ only in active length, 1016 and 1778 mm. Experimental data were collected using the 1016-mm sensor (MILS-MKII-040) that demonstrated a sensitivity of 9.2 μ V/mm in a room temperature testing stand that used solid aluminum as a surrogate for liquid metal. Experimental data were collected using the 1778-mm sensor (MILS-MKII-070) that demonstrated a sensitivity of 6.9 μ V/mm in the high-temperature (300 ° C) liquid sodium environment at the mechanisms engineering test loop (METL) of Argonne National Laboratory. The sensor performance was found to be repeatable over the course of several months, with roughly ±1% deviation from nominal output. Finite element models were developed in COMSOL Multiphysics that fully describe each test setup, and the models were validated using experimental data. The validated COMSOL models were used to perform an array of analyses that examined the performance of the sensor in differing environments. Maximizing the coil diameter inside the isolating thimble was found to maximize the signal and sensitivity of the sensor. An optimal operating frequency was found near 1000 Hz using both experimental data and COMSOL. The influence of a metallic thimble surrounding the sensor and a metallic sensor core was quantified and found to be negligible at the optimal operating frequency. The sensitivity of the sensor was quantified when monitoring the level of additional liquid metals. These include lead, lead-bismuth eutectic (LBE), sodium-potassium alloy (NaK), and lithium (in addition to sodium). The sensitivities were quantified using liquid metal properties at 350 ° C and 650 ° C. The geometry of the test stand model, all material properties used in the model, and the results are presented in a manner that allows the reader can replicate the model and perform additional analyses.

COMSOL↗

Investigation of deep levels in CdZnTeSe crystal and their effect on the internal electric field of CdZnTeSe gamma-ray detector

A study of deep levels in CdZnTeSe radiationdetection materials is presented. The approach relies on electrical methods that combine time and temperature evolution of the electric field and electric current after switching on the bias voltage. Two optical methods were also applied to study the deep levels. The first method utilizes the temperature and temporal analysis of the electric-field evolution after switching off an additional light illuminating the sample at a wavelength of 940 nm. The second method involved measuring of the electric-field spectral dependence during near infrared illumination. The results are compared with those obtained with high-quality CdZnTe detector-grade material. We conclude that the introduction of Se into the lattice leads to a shift of the second ionization level of the Cd vacancy towards the conduction band, as predicted recently by first-principles calculations based on screened hybrid functionals.

36 MATERIALS SCIENCE↗

Tri-Level Scheduling Model Considering Residential Demand Flexibility of Aggregated HVACs and EVs Under Distribution LMP

Residential loads, especially heating, ventilation and air conditioners (HVACs) and electric vehicles (EVs), have great potentials to provide demand flexibility which is an attribute of grid-interactive efficient buildings (GEB). Under this new paradigm, first, EV and HVAC aggregator models are developed in this paper to represent the fleet of GEBs, in which the aggregated parameters are obtained based on a new approach of data generation and least squares parameter estimation (DG-LSPE), which can deal with heterogeneous HVACs. Then, a tri-level bidding and dispatching framework is established based on competitive distribution operation with distribution locational marginal price (DLMP). Furthermore, the first two levels form a bilevel model to optimize the aggregators’ payment and to represent the interdependency between load aggregators and the distribution system operator (DSO) using DLMP, and the third level is to dispatch the optimal load aggregation to all residents by the proposed priority list-based demand dispatching algorithm. Finally, case studies on a modified IEEE 33-Bus system illustrate three main technical reasons of payment reduction due to demand flexibility: load shift, DLMP step changes, and power losses. They can be used as general guidelines for better decision-making for future planning and operation of demand response programs.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Nuclear level densities in {sup 208}Bi and {sup 209}Po from the neutron spectra in the (p, n) reactions on {sup 208}Pb and {sup 209}Bi nuclei

The spectra of neutrons from the (p, n) reactions on the {sup 208}Pb and {sup 209}Bi nuclei were measured in the proton-energy range 8-11 MeV. These measurements were performed by using a time-of-flight spectrometer of fast neutrons on the basis of the pulsed tandem accelerator EGP-15 of the Institute of Physics and Power Engineering (Obninsk, Russian Federation). A high resolution and stability of the time-of-flight spectrometermade it possible to identify reliably low-lying discrete levels alongwith the continuum section of the neutron spectra. The measured data were analyzed on the basis of the statistical equilibrium and preequilibrium models of nuclear reactions. The respective calculations were performed by using the precise formalism of Hauser-Feshbach statistical theory together with the generalized model of a superfluid nucleus and the back-shifted Fermi gas model for the nuclear-level density. The nuclear-level densities in {sup 208}Bi and {sup 209}Po were determined along with their energy dependencies and model parameters. Our results are discussed together with available experimental data and recommendations of model systematics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear level densities in {sup 47}V, {sup 48}V, {sup 49}V, {sup 53}Mn, and {sup 54}Mn from neutron evaporation spectra

The spectra of neutrons from the (p, n) reactions on {sup 47}Ti, {sup 48}Ti, {sup 49}Ti, {sup 53}Cr, and {sup 54}Cr nuclei were measured in the proton-energy range 7-11 MeV. The measurements were performed with the aid of a fast-neutron spectrometer by the time-of-flight method over the base of the EGP-15 tandem accelerator of the Institute for Physics and Power Engineering (IPPE, Obninsk). Owing to a high resolution and a high stability of the time-of-flight spectrometer used, low-lying discrete levels could be identified reliably along with a continuum section of neutron spectra. An analysis of measured data was performed within the statistical equilibrium and preequilibrium models of nuclear reactions. The relevant calculations were performed by using the exact formalism of Hauser-Feshbach statistical theory supplemented with the generalized model of a superfluid nucleus, the back-shifted Fermi gas model, and the Gilbert-Cameron composite formula for the nuclear level density. The nuclear level densities for {sup 47}V, {sup 48}V, {sup 49}V, {sup 53}Mn, and {sup 54}Mn were determined along with their energy dependences and model parameters. The results are discussed together with available experimental data and recommendations of model systematics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Energy dependence and systematics of level-density parameters in nuclei of mass number in the range of A = 20–60

Existing direct and indirect experimental data on level densities in excited nuclei of mass and charge number in the ranges of A = 20–60 and Z = 11–27, respectively, were compiled and analyzed. Contradictions between values extracted from the results of measurements performed by different methods were revealed. Consistent input data were selected, and a systematics of level-density parameters was created on this basis within the generalized model of superfluid nuclei. The effect of the first discrete vibrational levels on extracted parameters was studied.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Concerning the energy levels of silver in Ge-Si alloys

The emission from impurity states of silver (an element of the IB subgroup) in a Ge-Si alloy, containing 18 at % Si, has been studied. The donor level of silver has been found in crystals doubly doped with gallium and silver, while its first acceptor level has been revealed in crystals doped with only silver. Single crystals were grown by pulling from a melt using a feeding rod. Doping with gallium was performed by introducing this element into the feeding rod, and silver was introduced into the crystals via diffusion. The positions of the donor and first acceptor Ag levels with respect to the top of the valence band were found by analyzing the temperature dependence of the Hall coefficient and the electroneutrality equation for the crystal: 0.06 and 0.29 eV, respectively.

36 MATERIALS SCIENCE↗

On the resonant level of chromium in the rhombohedral and cubic phases of Pb{sub 1-x-y}Ge{sub x}Cr{sub y}Te alloys

The temperature dependences of the Hall coefficient (4.2 K {<=} T {<=} 300 K, B {<=} 0.07 T) in Pb{sub 1-x-y}Ge{sub x}Cr{sub y}Te alloys (x = 0.03-0.08, y {<=} 0.01) are studied. An increase in the absolute value of the Hall coefficient with an increase in temperature is found. This fact is indicative of a decrease in the concentration of free electrons as a result of the motion of the resonant level of chromium stabilizing the Fermi level relative to the conduction-band bottom. The temperature dependences of the Hall coefficient, in satisfactory agreement with the experimental ones, are calculated in the context of the two-band Kane dispersion law allowing for the structural phase transition upon increasing temperature. The energy position and temperature coefficients of the motion of the resonant level of chromium relative to the middle of the band gap in the rhombohedral and cubic phases are determined.

36 MATERIALS SCIENCE↗

Impurity levels in Hg{sub 3}In{sub 2}Te{sub 6} crystals

The parameters of impurity levels in Hg{sub 3}In{sub 2}Te{sub 6} samples are studied using the temperature dependences of the electron concentration n(T) and the Fermi-level energy E{sub F}(T). The dependences n(T) and E{sub F}(T) are obtained from data on the Hall coefficient R(T) and the thermopower α(T). Differential analysis of the dependences n(T) shows that, under variations in the degree of compensation by heat treatment of the samples, a wider spectrum of impurity levels in the band gap of Hg{sub 3}In{sub 2}Te{sub 6} can be analyzed.

36 MATERIALS SCIENCE↗

Effect of Dislocation-related Deep Levels in Heteroepitaxial InGaAs/GaAs and GaAsSb/GaAs p–i–n Structures on the Relaxation time of Nonequilibrium Carriers

The results of an experimental study of the capacitance–voltage (C–V) characteristics and deep-level transient spectroscopy (DLTS) spectra of p{sup +}–p{sup 0}–i–n{sup 0} homostructures based on undoped dislocationfree GaAs layers and InGaAs/GaAs and GaAsSb/GaAs heterostructures with homogeneous networks of misfit dislocations, all grown by liquid-phase epitaxy (LPE), are presented. Deep-level acceptor defects identified as HL2 and HL5 are found in the epitaxial p{sup 0} and n{sup 0} layers of the GaAs-based structure. The electron and hole dislocation-related deep levels, designated as, respectively, ED1 and HD3, are detected in InGaAs/GaAs and GaAsSb/GaAs heterostructures. The following hole trap parameters: thermal activation energies (E{sub t}), capture cross sections (σ{sub p}), and concentrations (N{sub t}) are calculated from the Arrhenius dependences to be E{sub t} = 845 meV, σ{sub p} = 1.33 × 10{sup –12} cm{sup 2}, N{sub t} = 3.80 × 10{sup 14} cm{sup –3} for InGaAs/GaAs and E{sub t} = 848 meV, σ{sub p} = 2.73 × 10{sup –12} cm{sup 2}, N{sub t} = 2.40 × 10{sup 14} cm{sup –3} for GaAsSb/GaAs heterostructures. The concentration relaxation times of nonequilibrium carriers are estimated for the case in which dislocation-related deep acceptor traps are involved in this process. These are 2 × 10{sup –10} s and 1.5 × 10{sup –10} s for, respectively, the InGaAs/GaAs and GaAsSb/GaAs heterostructures and 1.6 × 10{sup –6} s for the GaAs homostructures.

36 MATERIALS SCIENCE↗

Human Readiness Levels Explained

The Human Readiness Level scale complements and supplements the existing technology readiness level scale to support comprehensive and systematic evaluation of human system aspects throughout a system’s life cycle. The objective is to ensure humans can use a fielded technology or system as intended to support mission operations safely and effectively. This article defines the nine human readiness levels in the scale, explains their meaning, and illustrates their application using a helmet-mounted display example.

60 APPLIED LIFE SCIENCES↗

Levels of Digitization, Digitalization, and Automation for Advanced Reactors

Much has been written about levels of automation (LOA), but comparatively little has been written about levels of digitization (LODi) and levels of digitalization (LODa). Digitization is a digital representation of analog information and is typical of migration from analog to digital control systems, digitalization involves enhancing the functionality of digital information, and automation changes control from humans to machines. Each of these technology implementations has its own scales, and each forms a viable type of functionality that should be considered not as a continuum toward automation but rather as separate categories of solutions that meet the needs of advanced reactors. In this paper we develop separate LODi, LODa, and LOA scales and demonstrate how conflation of these technologies, using the example of computer-based procedures, can lead to confusion in the design process. With the race to develop advanced reactors, the surest metric of success and safety is proper consideration of the right technology requirements for different control systems.

99 GENERAL AND MISCELLANEOUS↗

Polarization spectroscopy of dressed four-wave mixing in a three-level atomic system

Polarization properties of pure four-wave mixing (FWM) and dressed-FWM processes in a two-level system and a cascade three-level atomic system are theoretically and experimentally investigated. The relative intensities and polarization characteristics of the FWM signals in different laser polarization configurations and different level systems are experimentally investigated and compared. Also, the results are theoretically explained by different transition paths combinations. In the dressed-FWM processes, we study the dependence of dressing effect on the incident field's polarization. The FWM signal generated by a linearly polarized pumping field is suppressed more by the dressing field than the one generated by a circularly polarized pumping field. However, an opposite effect was observed when the probe field's polarization is changed. The multidressing mechanisms are used to explain these effects. In addition, the interference and polarization dependence of the coexisting FWM signals in the same atomic system are discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗

GSOD Based Daily Global Mean Surface Temperature and Mean Sea Level Air Pressure (1982-2011)

This data product contains all the gridded data set at 1/4 degree resolution in ASCII format. Both mean temperature and mean sea level air pressure data are available. It also contains the GSOD data (1982-2011) from NOAA site, contains station number, location, temperature and pressures (sea level and station level). The data package also contains information related to the data processing methods

54 ENVIRONMENTAL SCIENCES↗