SEARCH · Search NASA

Results for “MAGNETIC COMPRESSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

All sources NASA NTRS DOE OSTI

NASA NTRS1995

CME stimulated by eruptive prominence

A model of CME arising due to drift motion in the corona in the presence of an eruptive prominence is presented. Magnetic field configuration is in accordance with a model of inverse polarity. In a region where a magnetic pressure of the filament magnetic field is greater than a gas pressure, plasma motion can be assumed as a drift motion. Its characteristic is such that the further one gets from the filament, the higher is drift velocity of a plasma. That sort of motion leads to a rarefaction of plasma and formation of a cavity around the filament. But a current strength in eruptive prominences estimated from observations is such that the region b is less than 1 has a limited size. Near the boundary b = 1 plasma deceleration is occurred and as a result of it coronal density is increasing. Plasma condensation near the surface b = 1 leads to formation of a dense envelope which can be collated with an outer loop of CME. Two dimensional numerical MHD simulation displays a process of cavity and loop formation. If a current is large enough, two compact regions of compressed dense matter arise at both sides of the rising filament and two narrow jets are developed. This scenario, perhaps, corresponds to CMEs in which a top of the loop is faint or it is absent at all.

Filippov, B. P.↗

DOE OSTI2021

Effect of hydrogen on tensile properties of 304L stainless steel at cryogenic temperatures

Safe and efficient hydrogen storage and distribution are key attributes to realizing hydrogen as an alternative energy carrier. To this end, cryogenic liquid and cryo-compressed gaseous hydrogen are considered high energy density alternatives to ambient temperature gas. However, these alternatives have significant material demands to overcome extreme temperature (20 K) and pressure (700 bar) as well as hydrogen effects. Austenitic stainless steels are widely used for cryogenic pressure vessels owing to relatively high ductility even at 4 K. However, the influence of hydrogen on mechanical properties at cryogenic temperatures has rarely been studied. In this study, the tensile properties of 304L austenitic stainless steel with internal hydrogen were evaluated at 20 K, 77 K, and 113 K. Test specimens were saturated with internal hydrogen to concentration of 140 wtppm in a high pressure environment at elevated temperature, a process called thermal precharging. While lower temperature in known to increase strength properties and reduced elongation at fracture, the presence of internal hydrogen increased both strength and elongation at fracture, but reduced ductility. Magnetic evaluation of the uniformly strained region of the test specimens suggest that hydrogen mitigates the strain-induced transformation to a’-martensite. Brittle fracture features and secondary cracking indicative of hydrogen embrittlement were observed on the fracture surfaces of hydrogen-precharged specimens, which is consistent with the loss of ductility.

Merkel, Daniel R.↗

DOE OSTI2019

A Novel Rigid PU Foam Based on Modified Used Palm Oil as Sound Absorbing Material

Novel bio-polyol was successfully synthesized from used palm oil (UPO) and was further tested for preparing rigid polyurethane (PU) foams. In this work, the modified used palm oil (MUPO) was synthesized in a single step process, by epoxidation together with ring opening reactions. The reagent ratios and reaction time for MUPO synthesis were also studied. The chemical structure of MUPO was confirmed by {sup 1}H-NMR spectroscopy and FTIR. The hydroxyl value of MUPO increased with reaction time and depended also on reagent ratio. The GPC trace of MUPO showed a bimodal distribution and the molecular weight slightly decreased with OH value. New rigid PU foams were prepared from MUPO. The foam cell size and compressive strength at 10% strain increased with OH value. All the rigid PU foams had excellent sound absorption coefficients. The lowest OH value (OHV = 100 mg KOH/g) provided sound absorption from 2200 Hz. In addition, the flammability of PU foams was improved by adding 30% wt of triphosphate (TPP) as flame retardant. The investigations showed that a bio-polyol based on UPO was suitable for preparing rigid PU foams that could serve as alternative sound absorbing materials. Graphical Abstract: .

36 MATERIALS SCIENCE↗

DOE OSTI2018

Time Dependence of the IBEX Ribbon and the Globally Distributed Energetic Neutral Atom Flux Using the First 9 Years of Observations

Observations from the Interstellar Boundary Explorer (IBEX) of energetic neutral atoms (ENAs) reveal two populations, those emitted from a narrow (~20°–40°) ribbon that is centered on the local interstellar magnetic field, and a globally distributed flux (GDF) that is controlled by processes in the heliosheath. This is a third study utilizing a previously developed technique to separate ENA emissions in the ribbon from the GDF. In the first ribbon separation study, we analyzed the first year of IBEX data at the energies of 0.7 keV and above; the second study analyzed data down to 0.2 keV using the first five years of IBEX data. Here, we utilize the separation analysis from 0.7 keV and above to study time evolution in 3 year intervals over the first nine years of IBEX data. This study is the first to reveal the global time evolution of the GDF distinct from that of the IBEX ribbon. We show that the time evolution of the GDF within 40° of the upwind pressure maximum is driven by changes in the solar wind ram pressure through compression and rarefaction in the heliosheath. In contrast, the GDF is relatively stable in the region centered on the heliotail downwind with respect to the interstellar flow. The evolution of the IBEX ribbon is observed to have a time lag with respect to the upwind GDF evolution, likely due to the secondary (neutral) solar wind source. The time lag observed in the ribbon evolution is consistent with the generation of ions retained for several years beyond the heliopause. These observations lend further support to secondary solar wind models of the IBEX ribbon, but also require that there is a significant several year time lag for reneutralization of ions that form the IBEX ribbon. We use this study of the 9 year separation of the IBEX ribbon from the globally distributed flux to prepare for a formal IBEX data release of ribbon and globally distributed flux maps to the heliophysics community.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2019

Suppression of the antiferromagnetic metallic state in the pressurized MnB i 2 T e 4 single crystal

We study the effect of hydrostatic pressure on the electrical transport, magnetic, and structural properties of MnB i 2 T e 4 by measuring its resistivity, Hall effect, and x-ray diffraction under pressures up to 12.8 GPa supplemented by the first-principles calculations. At ambient pressure, MnB i 2 T e 4 shows a metallic conducting behavior with a cusplike anomaly at around T N ≈ 24 K, where it undergoes a long-range antiferromagnetic (AF) transition. With increasing pressure, T N determined from the resistivity anomaly first increases slightly with a maximum at around 2 GPa and then decreases until vanishing completely at about 7 GPa. Intriguingly, its resistivity is enhanced gradually by pressure and even evolves from metallic to semimetal or semiconductinglike behavior as T N is suppressed. However, the density of the n-type charge carrier that remains dominant under pressure increases with pressure. In addition, the interlayer AF coupling seems to be strengthened under compression, since the critical field H c 1 for the spin-flop transition to the canted AF state is found to increase with pressure. No structural transition was evidenced up to 12.8 GPa, but some lattice softening was observed at about 2 GPa, signaling the occurrence of an electronic transition or crossover from a localized to itinerant state. Finally, we have rationalized these experimental findings by considering the pressure-induced enhancement of antiferromagnetic/ferromagnetic competition and partial delocalization of Mn-3 d electrons, which not only destroys long-range AF order but also promotes charge-carrier localization through enhanced spin fluctuations and/or the formation of a hybridization gap at high pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS1991

Generation of Pc 1 waves by the ion temperature anisotropy associated with fast shocks caused by sudden impulses

The high correlation of Pc 1 events with magnetospheric compressions is known. A mechanism is proposed which leads to the generation of Pc 1 waves. The interaction of a dynamic pressure pulse with the earth's bow shock leads to the formation of a weak fast-mode shock propagating into the magnetoshealth. The shock wave can pass right through a tangential discontinuity (magnetopause) and into the magnetosphere, without disturbing either of the structures. In a quasiperpendicular geometry, the shock wave exhibits anisotropic heating. This anisotropy drives unstable ion-cyclotron waves which can contribute to the generation of the Pc 1 waves which are detected. The viability of the mechanism is demonstrated with simulations. This mechanism could explain the peak in the occurrence of observed Pc 1 waves in the postnoon sector where a field-aligned discontinuity in the solar wind would most often be parallel to the magnetopause surface due to the average Parker-spiral magnetic-field configuration.

Mandt, M. E.↗

DOE OSTI2015

Investigation of compression of puffing neon by deuterium current and plasma sheath in plasma focus discharge

This paper presents the results of the research of the influence of compressed neon, injected by the gas-puff nozzle in front of the anode axis by the deuterium current and plasma sheath on the evolution of the pinch, and neutron production at the current of 2 MA. The intense soft X-ray emission shows the presence of neon in the central region of the pinch. During the implosion and stopping of the plasma sheath, the deuterium plasma penetrates into the internal neon layer. The total neutron yield of 10{sup 10}–10{sup 11} has a similar level as in the pure deuterium shots. The neutron and hard X-ray pulses from fusion D-D reaction are as well emitted both in the phase of the stopping implosion and during the evolution of instabilities at the transformation of plasmoidal structures and constrictions composed in this configuration from both gases. The fast deuterons can be accelerated at the decay of magnetic field of the current filaments in these structures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Strain-driven oxygen vacancy ordering in LaNiO 3 thin films revealed by integrated differential phase contrast imaging in scanning transmission electron microscopy

Rare-earth nickelates, such as LaNiO 3 (LNO), exhibit complex electronic properties, with ordered oxygen vacancies (OOV) influencing conductivity and magnetic behavior. We investigate the structural stability of strain-induced OOV phases in LNO thin films grown on SrTiO 3 substrates and the impact of Ruddlesden–Popper (RP) faults. Using high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and integrated differential phase contrast (iDPC) STEM imaging, we conducted atomic-scale structural and compositional analyses of OOV. Geometric phase analysis (GPA) was employed to measure the strain in fault-free and RP fault regions, while density functional theory (DFT) calculations explored different OOV arrangements in the LNO phase. Simulated iDPC-STEM imaging of energy-stabilized structures was performed to correlate with experimental results. Here, our findings reveal superstructure modulation in the chemical composition and atomic-scale lattice structure in LNO, primarily due to the formation of the OOV in Ni–O layers of the LaNiO 2.5 phase. The out-of-plane compressive strain of about 2% stabilizes this phase, reducing the strain, diminishing OOV, and transforming them into LNO.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Channeling acceleration in crystals and nanostructures and studies of solid plasmas: new opportunities

In this study, plasma wakefield acceleration (PWFA) has shown illustrious progress and resulted in an impressive demonstration of tens of GeV particle acceleration in meter-long single structures. To reach even higher energies in the 1 TeV to 10 TeV range, a promising scheme is channeling acceleration in solid-density plasmas within crystals or nanostructures. The E336 experiment studies the beam-nanotarget interaction with the highly compressed electron bunches available at the FACET-II accelerator. These studies furthermore involve an in-depth research on dynamics of beam-plasma instabilities in ultra-dense plasma, its development and suppression in structured media like carbon nanotubes and crystals, and its potential use to transversely modulate the electron bunch.

43 PARTICLE ACCELERATORS↗

DOE OSTI2024

Effect of parallel flow on resonant layer responses in high beta plasmas

Abstract Resonant layers in a tokamak respond to non-axisymmetric magnetic perturbations by amplifying the mode amplitude and balancing the plasma rotation through magnetic reconnection and force balance, respectively. This resonant response can be characterized by local layer parameters and especially by a single quantity in the linear regime, the so-called inner-layer Δ. The computation of Δ under two-fluid drift-MHD formalism has been progressed by reducing the order of the system in the phase space, where the shielding current is approximated as being only carried by electrons, a posteriori . In this study, we relax the approximation and compute Δ accounted for by the parallel flow associated with the ion shielding current. The posteriori is numerically verified in great agreement with the original SLAYER developed in a previous paper (J.-K. Park 2022 Phys. Plasmas 29 072506). Extending the resonant layer response theory to high β plasmas, our research findings answer two important questions: how the parallel flow influences the resonant layer response and why the parallel flow effect appears in high β plasmas. The complicated plasma compression in high β regime allows the parallel flow response to give rise to the ion shielding current, which not only shifts the zero-crossing condition of the ExB flow but also enhances the field penetration threshold. Technically, the Riccati matrix transformation method is adapted to handle the numerical stiffness due to the increased order of the system. The high fidelity of this numerical method makes use of further extension of the model to higher-order systems to take other physical phenomena into account. This work is envisaged to predict the resonant layer response under high β fusion reactor conditions.

Lee, Yeongsun (ORCID:000000034474416X)↗

DOE OSTI2023

Phonon mixing in the charge density wave state of ScV6Sn6

Abstract Kagomé metals are widely recognized, versatile platforms for exploring topological properties, unconventional electronic correlations, magnetic frustration, and superconductivity. In the R V 6 Sn 6 family of materials ( R = Sc, Y, Lu), ScV 6 Sn 6 hosts an unusual charge density wave ground state as well as structural similarities with the A V 3 Sb 5 system ( A = K, Cs, Rb). In this work, we combine Raman scattering spectroscopy with first-principles lattice dynamics calculations to reveal phonon mixing processes in the charge density wave state of ScV 6 Sn 6 . In the low temperature phase, we find at least four new peaks in the vicinity of the V-containing totally symmetric mode near 240 cm −1 suggesting that the density wave acts to mix modes of P 6/ m m m and $$R\bar{3}m$$ R 3 ¯ m symmetry - a result that we quantify by projecting phonons of the high symmetry state onto those of the lower symmetry structure. We also test the stability of the short-range ordered density wave state under compression and propose that both physical and chemical pressure quench the effect. We discuss these findings in terms of symmetry and the structure-property trends that can be unraveled in this system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS2017

Charger 1: A New Facility for Z-Pinch Research

Charger 1 is a multipurpose pulsed power laboratory located on Redstone Arsenal, with a focus on fusion propulsion relevant experiments involving testing z-pinch diodes, pulsed magnetic nozzle and other related physics experiments. UAH and its team of pulsed power researchers are investigating ways to increase and optimize fusion production from Charger 1. Currently the team has reached high-power testing. Due to the unique safety issues related to high power operations the UAH/MSFC team has slowed repair efforts to develop safety and operations protocols. The facility is expected to be operational by the time DZP 2017 convenes. Charger 1 began life as the Decade Module 2, an experimental prototype built to prove the Decade Quad pinch configuration. The system was donated to UAH by the Defense Threat Reduction Agency (DRTA) in 2012. For the past 5 years a UAH/MSFC/Boeing team has worked to refurbish, assemble and test the system. With completion of high power testing in summer 2017 Charger 1 will become operational for experimentation. Charger 1 utilizes a Marx Bank of 72 100-kV capacitors that are charged in parallel and discharged in series. The Marx output is compressed to a pulse width of approximately 200 ns via a pulse forming network of 32 coaxial stainless steel tubes using water as a dielectric. After pulse compression a set of SF6 switches are triggered, allowing the wave front to propagate through the output line to the load. Charger 1 is capable of storing 572-kJ of energy and time compressing discharge to less than 250 ns discharge time producing a discharge of about 1 TW of discharge with 1 MV and 1 MA peak voltage and current, respectively. This capability will be used to study energy yield scaling and physics from solid density target as applied to advanced propulsion research.

Taylor, Brian↗

DOE OSTI2015

Collision of plane thermonuclear detonation waves in a preliminarily compressed DT mixture

The paper deals with a one-dimensional problem on symmetric irradiation of a plane DT fuel layer with a thickness 2H and density ρ{sub 0} ⩽ 100ρ{sub s} (where ρ{sub s} is the density of the DT fuel in the solid state at atmospheric pressure and a temperature of 4 K) by two identical monoenergetic proton beams with a kinetic energy of 1 MeV, an intensity of 10{sup 19} W/cm{sup 2}, and a duration of 50 ps. The problem is solved in the framework of one-fluid two-temperature hydrodynamic model that takes into account the equation of state for hydrogen, electron and ion heat conductivities, kinetics of the DT reaction, plasma self-radiation, and plasma heating by α-particles. The irradiation of the fuel results in the appearance of two counterpropagating detonation waves to the fronts of which rarefaction waves are adjacent. The efficiency of the DT reaction after the collision (reflection from the plane of symmetry) of the detonation waves depends on the spatial homogeneity of thermodynamic functions between the fronts of the reflected detonation waves. At Hρ{sub 0} ≈ 1 g/cm{sup 2}, the gain factor is G ≈ 200, whereas at Hρ{sub 0} ≈ 5 g/cm{sup 2}, it is G > 2000. As applied to a cylindrical target that is ignited from ends and in which the cylinder with the fuel is surrounded by a heavy magnetized shell, the obtained values of the burn-up and gain factors are maximum possible. To estimate the ignition energy E{sub ig} of a cylindrical target by using solutions to the one-dimensional problem, a quasi-one-dimensional model is developed. The model assumes that the main mechanism of target ignition is fuel heating by α-particles. The trajectories of α-particles are limited by a cylindrical surface with a given radius, which is a parameter of the model and is identified with the fuel radius in the target and the radii of the irradiating proton beams. This model reproduces the well-known theoretical dependence E{sub ig} ∼ ρ{sub 0}{sup −2} and yields E{sub ig} = 160 kJ as a lower estimate of the ignition energy for ρ{sub 0} = 100ρ{sub s} ≈ 22 g/cm{sup 3}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2015

Tracing the 4000 year history of organic thin films: From monolayers on liquids to multilayers on solids

The recorded history of organic monolayer and multilayer thin films spans approximately 4000 years. Fatty-acid-based monolayers were deposited on water by the ancients for applications ranging from fortune telling in King Hammurabi's time (∼1800 BC, Mesopotamia) to stilling choppy waters for sailors and divers as reported by the Roman philosopher Pliny the Elder in ∼78 AD, and then much later (1774) by the peripatetic American statesman and natural philosopher Benjamin Franklin, to Japanese “floating-ink” art (suminagashi) developed ∼1000 years ago. The modern science of organic monolayers began in the late-1800s/early-1900s with experiments by Lord Rayleigh and the important development by Agnes Pockels, followed two decades later by Irving Langmuir, of the tools and technology to measure the surface tension of liquids, the surface pressure of organic monolayers deposited on water, interfacial properties, molecular conformation of the organic layers, and phase transitions which occur upon compressing the monolayers. In 1935, Katherine Blodgett published a landmark paper showing that multilayers can be synthesized on solid substrates, with controlled thickness and composition, using an apparatus now known as the Langmuir-Blodgett (L-B) trough. A disadvantage of LB films for some applications is that they form weak physisorbed bonds to the substrate. In 1946, Bigelow, Pickett, and Zisman demonstrated, in another seminal paper, the growth of organic self-assembled monolayers (SAMs) via spontaneous adsorption from solution, rather than from the water/air interface, onto SiO{sub 2} and metal substrates. SAMs are close-packed two-dimensional organic crystals which exhibit strong covalent bonding to the substrate. The first multicomponent adsorbed monolayers and multilayer SAMs were produced in the early 1980s. Langmuir monolayers, L-B multilayers, and self-assembled mono- and multilayers have found an extraordinarily broad range of applications including controlled wetting, adhesion, electrochemistry, biocompatibility, molecular recognition, biosensing, cell biology, non-linear optics, molecular electronics, solar cells, read/write/erase memory, and magnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2019

Stochastic Ion Acceleration by the Ion-cyclotron Instability in a Growing Magnetic Field

Using 1D and 2D particle-in-cell simulations of a plasma with a growing magnetic field ${\boldsymbol{B}}$, we show herein that ions can be stochastically accelerated by the ion-cyclotron (IC) instability. As ${\boldsymbol{B}}$ grows, an ion pressure anisotropy ${p}_{\perp ,i}\gt {p}_{| | ,i}$ arises due to the adiabatic invariance of the ion magnetic moment (${p}_{| | ,i}$ and $p_{⊥,i}$ are the ion pressures parallel and perpendicular to ${\boldsymbol{B}}$). When initially $β_ i$ = 0.5 (${\beta }_{i}\equiv 8\pi {p}_{i}/| {\boldsymbol{B}}{| }^{2}$, where $p_i$ is the ion isotropic pressure), the pressure anisotropy is limited mainly by inelastic pitch-angle scattering provided by the IC instability, which in turn produces a nonthermal tail in the ion energy spectrum. After ${\boldsymbol{B}}$ is amplified by a factor of ~2.7, this tail can be approximated as a power law of index ~3.4 plus two nonthermal bumps and accounts for 2%–3% of the ions and ~18% of their kinetic energy. On the contrary, when initially $β_i$ = 2, the ion scattering is dominated by the mirror instability, and the acceleration is suppressed. This implies that efficient ion acceleration requires that initially, $β_{i} \lesssim$ 1. Although we focus on cases where ${\boldsymbol{B}}$ is amplified by plasma shear, we check that the acceleration occurs similarly if ${\boldsymbol{B}}$ grows due to plasma compression. Our results are valid in a subrelativistic regime where the ion thermal energy is ~10% of the ion rest-mass energy. This acceleration process can thus be relevant in the inner region of low-luminosity accretion flows around black holes.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2019

Interaction of Strain Refined Precipitates and Recrystallized Grains in Nb-Ti Microalloyed Steel during Continuous Casting, Hot-Core Heavy Reduction Rolling, and Reheating Process

Hot-core heavy reduction rolling (HHR{sup 2}) is an energy-saving process that directly rolls continuously cast slabs at the end of solidification that have a large temperature gradient. Here, we elucidated the interaction of strain refined precipitates and recrystallized grains in Nb-Ti microalloyed steel during continuous casting, hot-core heavy reduction rolling, and reheating process. Furthermore, theoretical models were established to calculate recrystallization driving force and pinning force at temperatures in the range of 850-1300 °C by a two-stage interrupted compression test using a Gleeble-3800 thermomechanical simulator. The study indicated that a random dispersion of strain refined precipitates with a size range of ~ 6-10 nm was obtained in the hot-core heavy reduction rolled slab, which was different from the coarse and uneven distribution of precipitates in a conventional slab. Upon reheating, the austenite grains in the hot-core heavy reduction rolled slab were significantly refined and evenly distributed along the thickness direction. This is attributed to the random dispersion of strain refined precipitates formed in the HHR{sup 2} process.

36 MATERIALS SCIENCE↗

NASA NTRS2006

Plasma Circulation in the Magnetosphere

We investigate the global structure and dynamics of plasma circulation produced by prototypical solar wind disturbances of the interplanetary magnetic field and dynamic pressure. We track the global circulation and energization of solar wind, polar wind, and auroral wind plasmas throughout the magnetosphere, until they precipitate or escape into the downstream solar wind. We use the full equations of motion of the plasma ions within fields produced by a global MHD simulation of the dynamic solar wind interaction. We use the dynamic hot plasma density and Poynting energy flux specified at the inner boundary of the MHD simulation as drivers of conjugate ion outflow fluxes using local empirical relations obtained from the FAST and Polar missions. Birkeland currents computed by the MHD code are used to derive a field-parallel potential drop from a Knight-like relation [as modified by Lyons and Evans, 1980]. This potential drop is applied to each ion as an initial bulk energy, added to a thermal heating driven by the locally incident Poynting flux. The solar wind pressure increase case (B(sub Y) = 5; B(sub z) = 0 nT) produces an immediate substorm owing to compression of pre-existing plasmas. The SB(sub z), interval (embedded in NB(sub z)) produces a substorm after about one hour of development. Both disturbances enhance the auroral wind flux and heavy ion pressure of the magnetosphere substantially, with complex dynamic structuring by auroral acceleration vortexes and dynamic reconnection. Comparisons are made with observations during disturbed periods including the Halloween 2003 super-storm and other periods.

Moore, T. E.↗

NASA NTRS2001

Bioengineered anterior cruciate ligament

The present invention provides a method for producing an anterior cruciate ligament ex vivo. The method comprises seeding pluripotent stem cells in a three dimensional matrix, anchoring the seeded matrix by attachment to two anchors, and culturing the cells within the matrix under conditions appropriate for cell growth and regeneration, while subjecting the matrix to one or more mechanical forces via movement of one or both of the attached anchors. Bone marrow stromal cells are preferably used as the pluripotent cells in the method. Suitable matrix materials are materials to which cells can adhere, such as a gel made from collagen type I. Suitable anchor materials are materials to which the matrix can attach, such as Goinopra coral and also demineralized bone. Optimally, the mechanical forces to which the matrix is subjected mimic mechanical stimuli experienced by an anterior cruciate ligament in vivo. This is accomplished by delivering the appropriate combination of tension, compression, torsion, and shear, to the matrix. The bioengineered ligament which is produced by this method is characterized by a cellular orientation and/or matrix crimp pattern in the direction of the applied mechanical forces, and also by the production of collagen type I, collagen type III, and fibronectin proteins along the axis of mechanical load produced by the mechanical forces. Optimally, the ligament produced has fiber bundles which are arranged into a helical organization. The method for producing an anterior cruciate ligament can be adapted to produce a wide range of tissue types ex vivo by adapting the anchor size and attachment sites to reflect the size of the specific type of tissue to be produced, and also adapting the specific combination of forces applied, to mimic the mechanical stimuli experienced in vivo by the specific type of tissue to be produced. The methods of the present invention can be further modified to incorporate other stimuli experienced in vivo by the particular developing tissue, some examples of the stimuli being chemical stimuli, and electro-magnetic stimuli. Some examples of tissue which can be produced include other ligaments in the body (hand, wrist, elbow, knee), tendon, cartilage, bone, muscle, and blood vessels.

Altman, Gregory↗