Search NASA⌕ Search

SEARCH · Search NASA

Results for “Material Point Method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

A Comprehensive Analysis of Cardiac Dose in Balloon-Based High-Dose-Rate Brachytherapy for Left-Sided Breast Cancer

Purpose: To investigate radiation dose to the heart in 60 patients with left-sided breast cancer who were treated with balloon-based high-dose-rate brachytherapy using MammoSite or Contura applicators. Methods and Materials: We studied 60 consecutive women with breast cancer who were treated with 34 Gy in 10 twice-daily fractions using MammoSite (n = 37) or Contura (n = 23) applicators. The whole heart and the left and right ventricles were retrospectively delineated, and dose-volume histograms were analyzed. Multiple dosimetrics were reported, such as mean dose (D{sub mean}); relative volume receiving 1.7, 5, 10, and 20 Gy (V1.7, V5, V10, and V20, respectively); dose to 1 cc (D{sub 1cc}); and maximum point dose (D{sub max}). Biologic metrics, biologically effective dose and generalized equivalent uniform dose were computed. The impact of lumpectomy cavity location on cardiac dose was investigated. Results: The average {+-} standard deviation of D{sub mean} was 2.45 {+-} 0.94 Gy (range, 0.56-4.68) and 3.29 {+-} 1.28 Gy (range, 0.77-6.35) for the heart and the ventricles, respectively. The average whole heart V5 and V10 values were 10.2% and 1.3%, respectively, and the heart D{sub max} was >20 Gy in 7 of 60 (11.7%) patients and >25 Gy in 3 of 60 (5%) patients. No cardiac tissue received {>=}30 Gy. The V1.7, V5, V10, V20, and D{sub mean} values were all higher for the ventricles than for the whole heart. For balloons located in the upper inner quadrant of the breast, the average whole heart D{sub mean} was highest. The D{sub mean}, biologically effective dose, and generalized equivalent uniform dose values for heart and ventricles decreased with increasing minimal distance from the surface of the balloon. Conclusions: On the basis of these comprehensive cardiac dosimetric data, we recommend that cardiac dose be routinely reported and kept as low as possible in balloon-based high-dose-rate brachytherapy treatment planning for patients with left-sided breast cancer so the correlation with future cardiac toxicity data can be investigated.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Controllable synthesis, magnetic and biocompatible properties of Fe{sub 3}O{sub 4} and {alpha}-Fe{sub 2}O{sub 3} nanocrystals

Iron oxide nanocrystals (NCs) with a series of well-controlled morphologies (octahedron, rod, wire, cube and plate) and compositions (Fe{sub 3}O{sub 4} and {alpha}-Fe{sub 2}O{sub 3}) were synthesized via a facile hydrothermal process. The morphological and compositional control of various iron oxide NCs was based on the regulations of precursor thermolysis kinetics and surfactants. The obtained samples were characterized by XRD, SEM, TEM, SQUID and cytotoxicity test. These as-prepared iron oxide NCs showed excellent magnetic properties and good biocompatibility, paving the way for their high-efficiency bio-separation and bio-detection applications. - Graphical Abstract: Schematic illustration for the formation of iron oxide NCs (Fe{sub 3}O{sub 4} and {alpha}-Fe{sub 2}O{sub 3}) with different controlled morphologies and compositions. Highlights: Black-Right-Pointing-Pointer Iron oxide NCs with a series of well-controlled morphologies (octahedron, rod, wire, cube, and plate) and compositions (Fe{sub 3}O{sub 4} and {alpha}-Fe{sub 2}O{sub 3}) were synthesized via a facile hydrothermal method. Black-Right-Pointing-Pointer The mechanism of the morphological and compositional control process is directly related to precursor thermolysis kinetics and surfactants. Black-Right-Pointing-Pointer These iron oxide NCs exhibited excellent magnetic response and good biocompatibility, which should have great applications in the cell separation and biodetection.

36 MATERIALS SCIENCE↗

Thickness-dependence of block copolymer coarsening kinetics

In spite of active research, many fundamental aspects of block copolymer ordering remain unresolved. We studied the thickness-dependence of block copolymer grain coarsening kinetics, and find that thinner films order more rapidly than thicker films. Bilayer films, or monolayers with partial layers of islands, order more slowly than monolayers because of the greater amount of material that must rearrange in a coordinated fashion. Sub-monolayer films order much more rapidly than monolayers, exhibiting considerably smaller activation energies, as well as larger exponents for the time-growth power-law. Furthermore, by using molecular dynamics simulations, we directly study the motion of defects in these film regimes. Here, we attribute the enhanced grain growth in sub-monolayers to the film boundaries, where defects can be spontaneously eliminated. The boundaries thus act as efficient sinks for morphological defects, pointing towards methods for engineering rapid ordering of self-assembling thin films.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation of site preference of Zn doped Ba{sub 3}Co{sub 2−x}Zn{sub x}Fe{sub 24}O{sub 41} by Mössbauer spectroscopy

The polycrystalline Ba{sub 3}Co{sub 2−x}Zn{sub x}Fe{sub 24}O{sub 41} (x = 0.0, 0.5, 1.0) samples were prepared by using solid-state-reaction method. The crystal structures and magnetic properties of samples were investigated with x-ray diffractometer, vibrating sample magnetometer, and Mössbauer spectroscopy. The crystal structure of Ba{sub 3}Co{sub 2−x}Zn{sub x}Fe{sub 24}O{sub 41} (x = 0.0, 0.5, 1.0) samples was determined to be a hexagonal structure with P6{sub 3}/mmc space group at 295 K, and the saturation magnetization (M{sub s}) of Ba{sub 3}Co{sub 2−x}Zn{sub x}Fe{sub 24}O{sub 41} (x = 0.0, 0.5, 1.0) samples were found to be M{sub s} = 50.9, 53.1, 55.0 emu/g, respectively. From the temperature dependence of magnetization curves under 100 Oe between 4.2 and 740 K, we were able to observe the spin transition, and both spin transition temperature (T{sub s}) and Curie temperature (T{sub C}) decrease with increasing Zn concentration. Mössbauer spectra of all samples were obtained and analyzed at various temperatures ranging from 4.2 to 295 K. With ten-sextets for Fe sites corresponding to the Z-type hexagonal crystallographic sites, all spectra below T{sub C} were fitted by least-square method. In addition, from the site occupation numbers of Fe, calculated from the relative areas fitted to the Mössbauer spectra, we find that Zn ions preferentially occupy the tetrahedral sublattices of down sites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Inferring low-dimensional microstructure representations using convolutional neural networks

We apply here recent advances in machine learning and computer vision to a central problem in materials informatics: the statistical representation of microstructural images. We use activations in a pretrained convolutional neural network to provide a high-dimensional characterization of a set of synthetic microstructural images. Next, we use manifold learning to obtain a low-dimensional embedding of this statistical characterization. We show that the low-dimensional embedding extracts the parameters used to generate the images. Finally, according to a variety of metrics, the convolutional neural network method yields dramatically better embeddings than the analogous method derived from two-point correlations alone.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Field-Driven Dynamics of Magnetic Hopfions

Herein, we present micromagnetic simulations on resonant spin wave modes of magnetic Hopfions up to 15 GHz driven by external magnetic fields. A sharp transition is found around 32 mT coinciding with a transition from Hopfions to magnetic torons. Furthermore, the modes exhibit characteristic amplitudes in frequency space accompanied by unique localization patterns in real space, and are found to be robust to damping around topological features, particularly vortex lines in Hopfions and Bloch points in torons. The marked differences in spin wave spectra between Hopfions, torons and target skyrmions can serve as fingerprints in future experimental validation studies of these novel 3d topological spin textures.

36 MATERIALS SCIENCE↗

A Novel Method for Predicting Late Genitourinary Toxicity After Prostate Radiation Therapy and the Need for Age-Based Risk-Adapted Dose Constraints

Background: There are no well-established normal tissue sparing dose–volume histogram (DVH) criteria that limit the risk of urinary toxicity from prostate radiation therapy (RT). The aim of this study was to determine which criteria predict late toxicity among various DVH parameters when contouring the entire solid bladder and its contents versus the bladder wall. The area under the histogram curve (AUHC) was also analyzed. Methods and Materials: From 1993 to 2000, 503 men with prostate cancer received 3-dimensional conformal RT (median follow-up time, 71 months). The whole bladder and the bladder wall were contoured in all patients. The primary endpoint was grade ≥2 genitourinary (GU) toxicity occurring ≥3 months after completion of RT. Cox regressions of time to grade ≥2 toxicity were estimated separately for the entire bladder and bladder wall. Concordance probability estimates (CPE) assessed model discriminative ability. Before training the models, an external random test group of 100 men was set aside for testing. Separate analyses were performed based on the mean age (≤ 68 vs >68 years). Results: Age, pretreatment urinary symptoms, mean dose (entire bladder and bladder wall), and AUHC (entire bladder and bladder wall) were significant (P<.05) in multivariable analysis. Overall, bladder wall CPE values were higher than solid bladder values. The AUHC for bladder wall provided the greatest discrimination for late bladder toxicity when compared with alternative DVH points, with CPE values of 0.68 for age ≤68 years and 0.81 for age >68 years. Conclusion: The AUHC method based on bladder wall volumes was superior for predicting late GU toxicity. Age >68 years was associated with late grade ≥2 GU toxicity, which suggests that risk-adapted dose constraints based on age should be explored.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Strong-Field Bloch Electron Interferometry for Band-Structure Retrieval

When Bloch electrons in a solid are exposed to a strong optical field, they are coherently driven in their respective bands where they acquire a quantum phase as the imprint of the band shape. If an electron approaches an avoided crossing formed by two bands, it may be split by undergoing a Landau-Zener transition. We here employ subsequent Landau-Zener transitions to realize strong-field Bloch electron interferometry (SFBEI), allowing us to reveal band structure information. In particular, we measure the Fermi velocity (band slope) of graphene in the vicinity of the K points as 1.07±0.04 nm fs –1 . As a result, we expect SFBEI for band structure retrieval to apply to a wide range of material systems and experimental conditions, making it suitable for studying transient changes in band structure with femtosecond temporal resolution at ambient conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Potential application of curium neutron detection in the high reliability safeguards approach for remotely handled nuclear facilities

The study presented in this paper is part of a series of quantitative modeling efforts to characterize the neutron flux for the major subsystems in a pyroprocessing facility. An MCNPX model has established the electroreduction process, in which uranium oxide is converted into a metal product by electrochemical methods. This process is important because the electroreduction stage is the earliest point in the system where a diversion attempt could occur. This paper will present neutron flux for a commercial batch size. The intent of this study is to determine if the magnitude of the flux is sufficiently high as to affect facility design. (author)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Updated sustainability status of cadmium telluride thin‐film photovoltaic systems and projections

This paper provides a comprehensive assessment of the up-to-date life-cycle sustainability status of cadmium-telluride based photovoltaic (PV) systems. Current production modules (Series 6 and Series 7) are analyzed in terms of their energy performance and environmental footprint and compared with the older series 4 module production and current single-crystalline Silicon (sc-Si) module production. For fixed-tilt systems with Series 6 modules operating under average US irradiation of 1800 kWh/m 2 /year, the global warming potential (GWP) is reduced from 16 g CO 2eq /kWh in Series 4 systems to 10 CO 2 eq /kWh in Series 6 systems. For operation in US-SW irradiation of 2300 kWh/m 2 /year, the GWP is reduced from 11 to 8 CO 2eq /kWh and for 1-axis tracking systems operating in Phoenix, Arizona, with point-of array irradiation of 3051 kWh/m 2 /year the GWP is reduced to 6.5 CO 2eq /kWh. Similar reductions have happened in all environmental indicators. Energy payback times (EPBT) of currently installed systems range from 0.6 years for fixed–tilt ground–mounted installations at average US irradiation at latitude tilt installations to 0.3 years for one-axis trackers at high US-SW irradiation, considering average fossil-fuel dominated electricity grids with fuel to electricity conversion efficiency of 0.3. The resulting energy return on energy investment (EROI) also depends on the conversion efficiency of the electricity grid and on the operation life expectance. For a 30-year operational life and grid conversion efficiency of 0.3, EROI ranges from 50 (at US average irradiation) to 70 for US-SW irradiation. The EROI declines with increased grid conversion efficiency; for CdTe PV operating in south California with grid conversion efficiency of 49%, the EROI is about 50 and is projected to fall to 30 when the state's 2030 target of 80% renewable energy penetration materializes. Material alternatives that show a potential of further reductions in degradation rates and materials for enhanced encapsulation that would enable longer operation lives have also been investigated. A degradation rate of 0.3%/year, which has been verified by accelerated testing, is assumed in 30-year scenarios; this is projected to be reduced to 0.2%/year in the near-term and potentially to 0.1%/year in the longer term. With such low degradation rates and enhanced edge-sealing, modules can last 40- to 50-years. Consequently, all impact indicators will be proportionally reduced while EROI will increase. This detailed LCA was conducted according to ISO standards and IEA PVPS Task 12 guidelines. Furthermore, the study revealed that the choices of system models, methods and temporal system boundaries can significantly impact the results and points out to the need to include assumptions regarding these choices in the “transparency in reporting” requirements listed in the IEA PVPS Task 12 Guidelines.

14 SOLAR ENERGY↗

Converting Second‐Order Saddle Points to Transition States: New Principles for the Design of 4π Photoswitches

Abstract Molecular photoswitches have demonstrated potential for storing solar energy at the molecular level, with power densities comparable to commercial batteries and hydroelectric energy storage. However, development of efficient photoswitches is hindered by limitations in cyclability and optical properties of existing materials. We here demonstrate that certain limitations in photoswitches based on electrocyclizations stem from the issue of controlling competition between Woodward‐Hoffmann allowed and forbidden pathways. Our approach moves beyond the traditional view of activation barriers and reveals that second‐order saddle points are crucial in dictating the competition between disrotatory and conrotatory pathways. These insights suggest new opportunities to manipulate the competition between these pathways through geometric constraints, fundamentally altering the connectivity of the potential energy surface. Our study also emphasizes the necessity of multi‐reference methods and the need to conduct higher‐dimensional explorations for competing pathways beyond photoswitch design.

Chemistry↗

The existence of amorphous phase in Portland cements: Physical factors affecting Rietveld quantitative phase analysis

Rietveld quantitative phase analysis has become a widespread tool for the characterization of Portland cement, both for research and production control purposes. One of the major remaining points of debate is whether Portland cements contain amorphous content or not. This paper presents detailed analyses of the amorphous phase contents in a set of commercial Portland cements, clinker, synthetic alite and limestone by Rietveld refinement of X-ray powder diffraction measurements using both external and internal standard methods. A systematic study showed that the sample preparation and comminution procedure is closely linked to the calculated amorphous contents. Particle size reduction by wet-grinding lowered the calculated amorphous contents to insignificant quantities for all materials studied. No amorphous content was identified in the final analysis of the Portland cements under investigation.

36 MATERIALS SCIENCE↗

Microarray Cluster Analysis of Irradiated Growth Plate Zones Following Laser Microdissection

Purpose: Genes and pathways involved in early growth plate chondrocyte recovery after fractionated irradiation were sought as potential targets for selective radiorecovery modulation. Materials and Methods: Three groups of six 5-week male Sprague-Dawley rats underwent fractionated irradiation to the right tibiae over 5 days, totaling 17.5 Gy, and then were killed at 7, 11, and 16 days after the first radiotherapy fraction. The growth plates were collected from the proximal tibiae bilaterally and subsequently underwent laser microdissection to separate reserve, perichondral, proliferative, and hypertrophic zones. Differential gene expression was analyzed between irradiated right and nonirradiated left tibia using RAE230 2.0 GeneChip microarray, compared between zones and time points and subjected to functional pathway cluster analysis with real-time polymerase chain reaction to confirm selected results. Results: Each zone had a number of pathways showing enrichment after the pattern of hypothesized importance to growth plate recovery, yet few met the strictest criteria. The proliferative and hypertrophic zones showed both the greatest number of genes with a 10-fold right/left change at 7 days after initiation of irradiation and enrichment of the most functional pathways involved in bone, cartilage, matrix, or skeletal development. Six genes confirmed by real-time polymerase chain reaction to have early upregulation included insulin-like growth factor 2, procollagen type I alpha 2, matrix metallopeptidase 9, parathyroid hormone receptor 1, fibromodulin, and aggrecan 1. Conclusions: Nine overlapping pathways in the proliferative and hypertrophic zones (skeletal development, ossification, bone remodeling, cartilage development, extracellular matrix structural constituent, proteinaceous extracellular matrix, collagen, extracellular matrix, and extracellular matrix part) may play key roles in early growth plate radiorecovery.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Would Larger Radiation Fields Lead to a Faster Onset of Pain Relief in the Palliation of Bone Metastases?

Purpose: Hemibody irradiation has been shown to relieve bony metastatic pain within 24-48 hours of treatment, whereas for local external beam radiation, onset of pain relief is 1-4 weeks after radiation. The primary objective of this study is to examine whether there is a relationship between the areas of radiation treatment and onset of pain relief. Methods and Materials: From Jan 1999 to Jan 2002, a total of 653 patients with symptomatic bone metastases were treated with external beam radiation. Pain scores and analgesic consumption were recorded at baseline and Weeks 1, 2, 4, 8, and 12. The areas of radiation treatment for all patients were calculated, then correlated with the response and analyzed in various ways. We first compared pain score alone with mean radiation field size. Second, we combined pain score and analgesic consumption. Last, we implemented the International Consensus end points for pain score and analgesic intake. Results: Assessment of 653 patients showed no significant correlation comparing pain scores alone with radiation field area, with the exception of Week 4 for partial responders. Again, no significant correlation was found when combining both analgesic intake and pain score against radiation field size. Even when implementing the International Consensus end point definitions for radiation response, the only significant correlation between radiation field size and response was observed in Week 2 for partial response. Conclusion: There was no statistical significance between mean areas of radiation treatment with the onset of pain relief.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Intra-Arterial Infusion Chemotherapy Using Cisplatin With Radiotherapy for Stage III Squamous Cell Carcinoma of the Cervix

Purpose: To examine the effectiveness of concomitant intra-arterial infusion chemotherapy (IAIC) using cisplatin (CDDP) with radiotherapy for Stage III squamous cell carcinoma of the cervix. Materials and Methods: We analyzed 29 cases of Stage III squamous cell carcinoma of the uterine cervix treated with radiotherapy and IAIC of CDDP from 1991 to 2006. External-beam therapy was given to the whole pelvis using four opposing parallel fields with an 18-MV linear accelerator unit. A central shield was used after 30-40 Gy with external whole-pelvic irradiation, and the total dose was 50 Gy. High-dose-rate brachytherapy was given with {sup 192}Ir microSelectron. The dose at Point A was 6 Gy per fraction, 2 fractions per week, and the total number of fractions was either 3 or 4. Two or three courses of IAIC were given concomitantly with CDDP 120 mg or carboplatin 300 mg. Results: We confirmed excellent medicine distribution directly by using computed tomographic angiography. The 5-year overall survival rate for Stage III patients was 62%, the cause-specific survival rate was 70%, and the local relapse-free survival rate was 89%. Local recurrence, distant metastasis, and occurrences of both were 7%, 38%, and 3%, respectively. The incidence of severe acute hematologic adverse reactions (Grade {>=}3) was 27% for all patients; however, all recovered without interruption of radiotherapy. Severe nonhematologic effects (Grade {>=}3) were 3%, including nausea and ileus. Only 1 patient's radiotherapy was interrupted for a period of 1 week because of ileus. Severe late complication rates (Grade {>=}3) for the bladder, rectum, and intestine were 3%, 3%, and 10%, respectively. Conclusion: A combination of IAIC and systemic chemotherapy should be considered to improve the prognosis of patients with Stage III squamous cell carcinoma of the cervix.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Multileaf Collimator Tracking Improves Dose Delivery for Prostate Cancer Radiation Therapy: Results of the First Clinical Trial

Purpose: To test the hypothesis that multileaf collimator (MLC) tracking improves the consistency between the planned and delivered dose compared with the dose without MLC tracking, in the setting of a prostate cancer volumetric modulated arc therapy trial. Methods and Materials: Multileaf collimator tracking was implemented for 15 patients in a prostate cancer radiation therapy trial; in total, 513 treatment fractions were delivered. During each treatment fraction, the prostate trajectory and treatment MLC positions were collected. These data were used as input for dose reconstruction (multiple isocenter shift method) to calculate the treated dose (with MLC tracking) and the dose that would have been delivered had MLC tracking not been applied (without MLC tracking). The percentage difference from planned for target and normal tissue dose-volume points were calculated. The hypothesis was tested for each dose-volume value via analysis of variance using the F test. Results: Of the 513 fractions delivered, 475 (93%) were suitable for analysis. The mean difference and standard deviation between the planned and treated MLC tracking doses and the planned and without-MLC tracking doses for all 475 fractions were, respectively, PTV D{sub 99%} −0.8% ± 1.1% versus −2.1% ± 2.7%; CTV D{sub 99%} −0.6% ± 0.8% versus −0.6% ± 1.1%; rectum V{sub 65%} 1.6% ± 7.9% versus −1.2% ± 18%; and bladder V{sub 65%} 0.5% ± 4.4% versus −0.0% ± 9.2% (P<.001 for all dose-volume results). Conclusion: This study shows that MLC tracking improves the consistency between the planned and delivered doses compared with the modeled doses without MLC tracking. The implications of this finding are potentially improved patient outcomes, as well as more reliable dose-volume data for radiobiological parameter determination.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Robust and tunable Weyl phases by coherent infrared phonons in ZrTe5

Abstract Ultrafast control of structural and electronic properties of various quantum materials has recently sparked great interest. In particular, photoinduced switching between distinct topological phases has been considered a promising route to realize quantum computers. Here we use first-principles and effective Hamiltonian methods to show that in ZrTe 5 , lattice distortions corresponding to all three types of zone-center infrared optical phonon modes can drive the system from a topological insulator to a Weyl semimetal. Thus achieved Weyl phases are robust, highly tunable, and one of the cleanest due to the proximity of the Weyl points to the Fermi level and a lack of other carriers. We also find that Berry curvature dipole moment, induced by the dynamical inversion symmetry breaking, gives rise to various nonlinear effects that oscillate with the amplitude of the phonon modes. These nonlinear effects present an ultrafast switch for controlling the Weyltronics-enabled quantum system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth and magnetic property of {zeta}-phase Mn{sub 2}N{sub 1{+-}x} thin films by plasma-assisted molecular beam epitaxy

{zeta}-phase manganese nitride films were directly grown on sapphire substrates using plasma-assisted molecular beam epitaxy. Mn{sub 2}N{sub 1.06}, Mn{sub 2}N{sub 0.98}, and Mn{sub 2}N{sub 0.86} films were synthesized by controlling the temperature of the effusion cell filled with highly pure manganese powder. The composition, structure, and morphology of the films were identified by x-ray photoelectron spectroscopy, x-ray diffraction and atomic force microscopy, and the magnetic properties of the films were characterized by a superconducting quantum interference device magnetometer at 5 and 300 K. The magnetic measurements reveal that Mn{sub 2}N{sub 1{+-}x} exhibits weak ferromagnetism at 5 K, which is mainly ascribed to the weak interaction among the Mn cations induced by the nitrogen vacancies. Furthermore, the Mn{sub 2}N{sub 0.86} single-crystalline films are found to have room-temperature ferromagnetism, which is attributed to the strain of the Mn{sub 2}N{sub 0.86} films raised from lattice mismatch between the Mn{sub 2}N{sub 0.86} films and the substrates.

36 MATERIALS SCIENCE↗